Beam Position and Beam Hopping Design for LEO Satellite Communications

The numbers of beam positions(BPs)and time slots for beam hopping(BH)dominate the latency of LEO satellite communications.Aiming at minimizing the number of BPs subject to a predefined requirement on the radius of BP,a low-complexity user density-based BP design scheme is proposed,where the original problem is decomposed into two subproblems,with the first one to find the sparsest user and the second one to determine the corresponding best BP.In particular,for the second subproblem,a user selection and smallest BP radius algorithm is proposed,where the nearby users are sequentially selected until the constraint of the given BP radius is no longer satisfied.These two subproblems are iteratively solved until all the users are selected.To further reduce the BP radius,a duplicated user removal algorithm is proposed to decrease the number of the users covered by two or more BPs.Aiming at minimizing the number of time slots subject to the no co-channel interference(CCI)constraint and the traffic demand constraint,a low-complexity CCI-free BH design scheme is proposed,where the BPs having difficulty in satisfying the constraints are considered to be illuminated in priory.Simulation results verify the effectiveness of the proposed schemes.

Efficient Single Event Upset-Tolerant FIR Filter Design Based on Residue Number for OBP Satellite Communication Systems

Cosmic radiation has several effects on the On-Board Processing(OBP)platform in satellite communications systems,and Single Event Upsets(SEUs)are one of its most important effects.In order to protect the Finite Impulse Response(FIR)filters against SEU,this paper proposes a novel Residue Number(RN)-based method.The proposed method applies the transpose form of the FIR filter to avoid the fault missing caused by SEU on shift registers.It also adjusts the input intelligently to avoid the fault missing caused by SEU on the filter coefficients.After all the fault missing events are avoided,the modulus can be minimised to achieve the minimum overhead.Theoretical analysis and simulation results show that the noise introduced by the input adjustment is negligible.Fault injection shows that the fault missing rate of the proposed method is zero.Finally,FPGA implementation shows that the overhead of the proposed method is approximately 75% of Triple Modular Redundancy,and is only 1%-2% higher than that of the traditional RN-based design.

Integrated Performance Optimization of Satellite Communications Constellation

In order to attain better communications performance rather than just expand coverage and save system cost,criteria related to the communications quality and capacity are extracted and revised to build an integrated performance metric system which aims to effectively guide the satellite communications constellation design.These performance metrics together with the system cost serve as the multiple objectives whilst the coverage requirement is regarded as the basic constraint in the optimization of the constellation configuration design applying a revised NSGA-II algorithm.The Pareto hyper-volumes lead to the best configuration schemes which achieve better integrated system performance compared with the conventional design results based merely on coverage and cost.

Off-axis two-mirror laser communication antenna designed using differential equations

In satellite laser communication technology, which is built between planets and between a planet and the Earth, the optical antenna is the key point. Thus, research on optical system design is important. The off-axis reflective system has no obscuration and hence possesses a high efficiency for energy transfer. This study proposes a novel method for designing a free-form off-axis reflective imaging system. This study also introduces differential equations that depend on Fermat＇s principle and sine condition. Finally, a free-form off-axis two-mirror optical system was designed by using the differential equation method. This system includes one intermediate image plane, in which the field of view （FOV） is -5° to -4° in the y-axis and -1° to 0° in the x-axis. The modulation transfer function was greater than 0.7 at 50 lp/mm, and the efficiency of energy transmission was high. The free-form off-axis two-mirror optical system involves a wide range of application prospects in the optical antenna used in the satellite laser communication systems. Moreover, the design method that used differ- ential equations was proven simple and effective.

Th-Shaped Tunable Multi-Band Antenna for Modern Wireless Applications

A compact,reconfigurable antenna supporting multiple wireless services with a minimum number of switches is found lacking in literature and the same became the focus and outcome of this work.It was achieved by designing a Th-Shaped frequency reconfigurable multi-band microstrip planar antenna,based on use of a single switch within the radiating structure of the antenna.Three frequency bands(i.e.,2007–2501 MHz,3660–3983MHz and 9341–1046 MHz)can be operated with the switch in the ON switch state.In the OFF state of the switch,the antenna operates within the 2577–3280MHz and 9379–1033MHz Bands.The proposed antenna shows an acceptable input impedance match with Voltage Standing Wave Ratio(VSWR)less than 1.2.The peak radiation efficiency of the antenna is 82%.A reasonable gain is obtained from 1.22 to 3.31 dB within the operating bands is achieved.The proposed antenna supports UniversalMobile Telecommunication System(UMTS)-1920 to 2170 MHz,Worldwide Interoperability and Microwave Access(WiMAX)/Wireless Broadband/(Long Term Evolution)LTE2500–2500 to 2690 MHz,Fifth Generation(5G)-2500/3500 MHz,Wireless Fidelity(Wi-Fi)/Bluetooth-2400 to 2480 MHz,and Satellite communication applications in X-Band-8000 to 12000 MHz.The overall planar dimension of the proposed antenna is 40×20mm2.The antennawas designed,along with the parametric study,using Electromagnetic(EM)simulation tool.The antenna prototype is fabricated for experimental validation with the simulated results.The proposed antenna is low profile,tunable,lightweight,cheap to fabricate and highly efficient and hence is deemed suitable for use in modern wireless communication electronic devices.

某宾馆卫星及共用天线系统技术分析与设计

本文通过具体工程实例,介绍了某四星级宾馆的卫星通信系统及有线电视接收网的方案及设计。