Work has been done with extending the useful imaging and detection range of CCD.This was accomplished through direct optical coupling and bonding of i-mage intensifiers to the CCD.It has been shown that the useful ran...Work has been done with extending the useful imaging and detection range of CCD.This was accomplished through direct optical coupling and bonding of i-mage intensifiers to the CCD.It has been shown that the useful range of a CCD may be extended two orders of magnitude using these techniques in coupling a microchannel plate image intensifier to the CCD array.All of these works were done with presently available CCD made by China.展开更多
The goals of engineering and scientific missions for Chang＇E-2 lunar satellite require high detection sensitivity and large imaging dynamic range for the onboard CCD cameras. The TDI CCD image sensor was adopted for ...The goals of engineering and scientific missions for Chang＇E-2 lunar satellite require high detection sensitivity and large imaging dynamic range for the onboard CCD cameras. The TDI CCD image sensor was adopted for the two linear CCD stereo cameras for the first time in the lunar reconnaissance of the world. The design argumentation is described in this paper. The analysis shows that the imagers meet the mission requirements. The satellite was launched on 1 October 2010 at zero window. The cameras obtained images of 7 m resolution on the 100 km orbit for the first time on 24 October 2010, and operated once again on 27 October 2010 to take stereo images of the Sinus Iridum with the resolution better than 1.5 m. On the near-moon-arc of 15 kmxl00 km elliptical orbit, the images are very clear and rich of grey scales, indicating successful completion of the Chang＇E-2 engineering mission. At the present the cameras are acquiring the full lunar surface stereo images with 7 m resolution on the 100 km circular orbit to complete their scientific mission.展开更多
A hardware/software field programmable gate array （FPGA）-based driver system was proposed and demonstrated for the KAF-39000 large area high resolution charge coupled device （CCD）. The requirements of the KAF-3900...A hardware/software field programmable gate array （FPGA）-based driver system was proposed and demonstrated for the KAF-39000 large area high resolution charge coupled device （CCD）. The requirements of the KAF-39000 driver system were analyzed. The structure of ＂microprocessor with application specific integrated circuit （ASIC） chips＂ was implemented to design the driver system. The system test results showed that dual channels of imaging analog data were obtained with a frame rate of 0.87frame/s. The frequencies of horizontal timing and vertical timing were 22.9MHz and 28.7kHz, respectively, which almost reached the theoretical value of 24 MHz and 30kHz, respectively.展开更多
文摘Work has been done with extending the useful imaging and detection range of CCD.This was accomplished through direct optical coupling and bonding of i-mage intensifiers to the CCD.It has been shown that the useful range of a CCD may be extended two orders of magnitude using these techniques in coupling a microchannel plate image intensifier to the CCD array.All of these works were done with presently available CCD made by China.
文摘The goals of engineering and scientific missions for Chang＇E-2 lunar satellite require high detection sensitivity and large imaging dynamic range for the onboard CCD cameras. The TDI CCD image sensor was adopted for the two linear CCD stereo cameras for the first time in the lunar reconnaissance of the world. The design argumentation is described in this paper. The analysis shows that the imagers meet the mission requirements. The satellite was launched on 1 October 2010 at zero window. The cameras obtained images of 7 m resolution on the 100 km orbit for the first time on 24 October 2010, and operated once again on 27 October 2010 to take stereo images of the Sinus Iridum with the resolution better than 1.5 m. On the near-moon-arc of 15 kmxl00 km elliptical orbit, the images are very clear and rich of grey scales, indicating successful completion of the Chang＇E-2 engineering mission. At the present the cameras are acquiring the full lunar surface stereo images with 7 m resolution on the 100 km circular orbit to complete their scientific mission.
文摘A hardware/software field programmable gate array （FPGA）-based driver system was proposed and demonstrated for the KAF-39000 large area high resolution charge coupled device （CCD）. The requirements of the KAF-39000 driver system were analyzed. The structure of ＂microprocessor with application specific integrated circuit （ASIC） chips＂ was implemented to design the driver system. The system test results showed that dual channels of imaging analog data were obtained with a frame rate of 0.87frame/s. The frequencies of horizontal timing and vertical timing were 22.9MHz and 28.7kHz, respectively, which almost reached the theoretical value of 24 MHz and 30kHz, respectively.
