Mesostructured Ce0.6Zr0.4O2 solid solutions were synthesized by coprecipitation combined with evaporation-induced self-assembly process. The obtained materials were characterized by X-ray diffractometer （XRD）, Raman...Mesostructured Ce0.6Zr0.4O2 solid solutions were synthesized by coprecipitation combined with evaporation-induced self-assembly process. The obtained materials were characterized by X-ray diffractometer （XRD）, Raman, transmission electron microscopy （TEM）, N2 sorption, and hydrogen temperature programmed reduction （H2-TPR）. The results showed that the solid solutions consisted of uniform nanocrystals, which piled homogeneous mesopores of about 4 nm. Furthermore, different surfactants had little influence on the mesoporous structures. All these samples exhibited high thermal stability.展开更多
The effect of the mixing ways of Ce0.7Zr0.3O2-Al2O3 mixed oxides on the partial oxidations of methane （POM） was investigated over Pd/Ce0.7Zr0.3O2-Al2O3 catalysts, the mixing ways including salt precursor mixing （A...The effect of the mixing ways of Ce0.7Zr0.3O2-Al2O3 mixed oxides on the partial oxidations of methane （POM） was investigated over Pd/Ce0.7Zr0.3O2-Al2O3 catalysts, the mixing ways including salt precursor mixing （ATOM）, precipitator mixing （MOL）, and powder mechanically mixing （MECH）, respectively. The test results indicated that among the three samples, Pd/ATOM had the best catalytic activity while Pd/MOL had the best stability in the stability test. Both the activity sequences of the fresh and used samples were consistent with the order of Pd dispersion. According to the X-ray diffraction （XRD） and BET characterization, the interaction of Ce^4＋, Zr^4＋, and Al^3＋ in the ATOM mixed oxide was in favor of performing higher catalytic activity and thermal stability. The stability test indicated that Pd/MOL had the highest Pd dispersion and least coke formation on the active sites calculated by the Hz-chemisorption and TG results, which was considered to relate to its superior activity of POM to other catalysts.展开更多
Ce0.6Zr0.3RE0.1O2(RE = Y, La, Pr, Tb)solid solutions were prepared by co-precipitation technique and characterized by a series of methods. XRD and FT-Raman results show that Ce0.6Zr0.3RE0.1O2 has cubic fluorite struct...Ce0.6Zr0.3RE0.1O2(RE = Y, La, Pr, Tb)solid solutions were prepared by co-precipitation technique and characterized by a series of methods. XRD and FT-Raman results show that Ce0.6Zr0.3RE0.1O2 has cubic fluorite structure. The different dopant ion radii bring different effect on the cell parameter of Ce0.6Zr0.3RE0 1O2. The X-ray photoelectron spec-troscopy (XPS) results show that the binding energy of Ce3d, Zr3d and O1s for Ce0.6Zr0.3RE0.1O2 rises compared with that for Ce0.6Zr0.4O2, indicating that dopant elements change chemistry environment of solid solutions which is available to improve redox performance. Compared with Pd/Ce0.6Zr0.4O2, doping Y and La does not change air/fuel (A/F) characteristic of TWCs, but doping Pr and Tb widens A/F operating window and makes HC, CO and NO have higher conversion. The light-off temperature of Pd/Ce0.6Zr0.3La0.1O2 is corresponding to that of Pd/Ce0.6Zr0.4O2. However, the light-off temperatures of Pd/Ce0.6Zr0.3M0.1O2(M = Y, Pr, Tb) are lower than that of Pd/Ce0.6Zr0.4O2, which keep much lower after high temperature treatments. Among Pd/Ce0.6Zr0.3RE0.1 O2, Pd/Ce0.6Zr0.3Tb0.1 O2 represents wider A/F operating window, higher conversion, lower light-off temperature and better high-temperature resistance.展开更多
Ce0.6Zr0.4O2 solid solution was prepared by co-precipitation technique using hydrazine hydrate as precipitator.Various physico-chemical techniques such as XRD, FT-Raman, SEM, TEM, etc.were used to characterize the res...Ce0.6Zr0.4O2 solid solution was prepared by co-precipitation technique using hydrazine hydrate as precipitator.Various physico-chemical techniques such as XRD, FT-Raman, SEM, TEM, etc.were used to characterize the resultant powder.Meanwhile, its catalytic activity was evaluated in the synthesis of n-butyl acetate by the reaction of acetic acid and n-butyl alcohol.The results show that ceria-zirconia solid solution forms single cubic structure and its particle diameter is less than 100 nm.As a sort of solid acid, it possesses high catalytic activity and can be easily separated from reaction liquid.After it is used for ten times, its activity basically kees unchanging.展开更多
Ordered mesoporous ceria and ceria-zirconia with high specific surface area were prepared by nanocasting of a mesoporous silica KIT-6 template and used for soot oxidation.The as-synthesized ordered mesoporous ceria an...Ordered mesoporous ceria and ceria-zirconia with high specific surface area were prepared by nanocasting of a mesoporous silica KIT-6 template and used for soot oxidation.The as-synthesized ordered mesoporous ceria and ceria-zirconia were characterized by XRD,TEM,Nitrogen adsorption-desorption,Raman spectroscopy,and XRF.The results indicate that mesoporous ceria and ceria-zirconia possess highly ordered mesoporous structure,and exhibited excellent catalytic performance in soot oxidation.T_（50） of mesoporous ceria and ceria-zirconia are 475 and 470 ℃,respectively.The high catalytic activity of mesoporous materials can be attributed to the mesoporous structure and small crystallite size.Moreover,aged mesoporous materials exhibit high catalytic activity.展开更多
A series of gold-based catalysts were prepared by deposition precipitation or incipient wetness impregnation on CexZ1-xO2 solid solutions （0.28≤x≤1.00）. The morphological and structural characterization of these c...A series of gold-based catalysts were prepared by deposition precipitation or incipient wetness impregnation on CexZ1-xO2 solid solutions （0.28≤x≤1.00）. The morphological and structural characterization of these catalysts were carried out with X-ray diffraction, trans- mission electron microscopy （TEM） analysis and physical adsorption technique, and their redox properties were studied by temperature programmed reduction using both H2 and CO as probe molecules. Two cycles of oxidation/reduction were carried out in order to evaluate the effects of redox aging and gold sintering on the oxygen exchange capability. As observed with other noble metals, gold enhanced and promoted the ceria reduction at lower temperatures. Reduction by CO was shown to be dependent on the fine dispersion of gold and to be nega- tively affected by the ageing process more than reduction with hydrogen. This might have implications in reactions like water gas shift and CO-PROX which involve CO as a main reactant.展开更多
A new method called ultrasonic-assisted membrane reaction(UAMR)was reported for the fabrication of ceria-zirconia solid solution.A series of ceria-zirconia solid solutions with different Ce/Zr molar ratios were prepar...A new method called ultrasonic-assisted membrane reaction(UAMR)was reported for the fabrication of ceria-zirconia solid solution.A series of ceria-zirconia solid solutions with different Ce/Zr molar ratios were prepared by the UAMR method and characterized by Xray diffraction(XRD),N2 adsorption,hydrogen temperature-programmed reduction(H2-TPR),scanning electron microscope(SEM),and transmission electron microscopy(TEM)techniques.The UAMR method proved to be superior,especially when the Ce/Zr molar ratio was lower than 1,in fabricating ceria-zirconia solid solutions with large BET surface area,high oxygen storage capacity(OSC),and low reduction temperature.展开更多
As the oxygen redox ability shows great effects on the catalytic performances of ceria-zirconia based materials,many strategies have been utilized to improve the oxygen storage capacity.Here in this study,we report a ...As the oxygen redox ability shows great effects on the catalytic performances of ceria-zirconia based materials,many strategies have been utilized to improve the oxygen storage capacity.Here in this study,we report a simple and facile approach to prepare a SO_(4)^(2-)-modified La,Y-doped ceria-zirconia material(SO/CZLY-f)with high oxygen storage capacity.Due to the additional redox process between SO_(4)^(2-)and S^(2-),oxygen storage capacity of SO/CZLY-f(745.3μmol O_(2)/g)is about 1.6 times higher than that of La,Ydoped ceria-zirconia material without SO_(4)^(2-)modification.Moreover,the catalytic activities and stability of the corresponding Pd-only three-way catalyst were measured.Compared to that of Pd@CZLY-f,the operation window of CO,full conversion temperature of HC and NO over Pd@SO/CZLY-f are obviously widened and lowered,respectively.After aging treatment at 1100℃for 4 h,the superiority of aged Pdloading composite is still maintained.展开更多
Ru/Ce-Zr catalysts were prepared by impregnation of Ru on the hydrothermally synthesized Ce-Zr mixed oxide with different molar ratio of Ce/Zr.The resultant products were systematically characterized by inductively co...Ru/Ce-Zr catalysts were prepared by impregnation of Ru on the hydrothermally synthesized Ce-Zr mixed oxide with different molar ratio of Ce/Zr.The resultant products were systematically characterized by inductively coupled plasma(ICP),X-ray diffraction(XRD),scanning electron microscopy(SEM)/energy dispersive spectrometry(EDS),H2-temperature programmed reduction(H2-TPR),NH3-temperature programmed desorption(NH3-TPD)and X-ray photoelectron spectroscopy(XPS).It was proved by H2-TPR and NH3-TPD that the introduction of Ru can improve the activity of oxygen of catalysts and the presence of Zr contributes to the increments of acid properties of catalysts.When the molar ratio of Ce-Zr was 8:4,the quantity of Ru was 0.9%(mass ratio),and the calcined temperature of catalysts was at 400℃,the removal rate of 90% for trichloroethylene(TCE)was reached at 250℃ for 5360 mg/m^3 TCE and the stability of the catalysts was investigated under the condition.The results showed that the high removal rate can be maintained for at least 90 h,which is promising for industrial application.展开更多
Superfine composite powders of CeO2-ZrO2 (CZ) and CeO2-ZrO2-La2O3 (CZL) were prepared by hydrothermal method. The effects of pH?temperature and time for hydrothermal process on the performance of the resulting powders...Superfine composite powders of CeO2-ZrO2 (CZ) and CeO2-ZrO2-La2O3 (CZL) were prepared by hydrothermal method. The effects of pH?temperature and time for hydrothermal process on the performance of the resulting powders were studied. The optimized reaction parameters were on follows: the precursor′s pH≈9.0, hydrothermal temperature of 200 ℃ holding for 2 h. Thermal stable powders with average particle size smaller than 10 nm and specific surface area of 171 m2·g-1 were obtained. A BET specific surface area was still at 44 m2·g-1 after calcination at 1 000 ℃ for 6 hours.展开更多
基金supported by 973 Project (2004CB719500)the New Century Excellent Talents in University (NCET-05-415)the Natural Science Foundation of China (20673037)
文摘Mesostructured Ce0.6Zr0.4O2 solid solutions were synthesized by coprecipitation combined with evaporation-induced self-assembly process. The obtained materials were characterized by X-ray diffractometer （XRD）, Raman, transmission electron microscopy （TEM）, N2 sorption, and hydrogen temperature programmed reduction （H2-TPR）. The results showed that the solid solutions consisted of uniform nanocrystals, which piled homogeneous mesopores of about 4 nm. Furthermore, different surfactants had little influence on the mesoporous structures. All these samples exhibited high thermal stability.
基金973 Program (2004CB719503)Key Program of Natural Science Foundation of Tianjin (07JCZDJC01600)Program for New Century Excellent Talents in University (NCET-06-0243)
文摘The effect of the mixing ways of Ce0.7Zr0.3O2-Al2O3 mixed oxides on the partial oxidations of methane （POM） was investigated over Pd/Ce0.7Zr0.3O2-Al2O3 catalysts, the mixing ways including salt precursor mixing （ATOM）, precipitator mixing （MOL）, and powder mechanically mixing （MECH）, respectively. The test results indicated that among the three samples, Pd/ATOM had the best catalytic activity while Pd/MOL had the best stability in the stability test. Both the activity sequences of the fresh and used samples were consistent with the order of Pd dispersion. According to the X-ray diffraction （XRD） and BET characterization, the interaction of Ce^4＋, Zr^4＋, and Al^3＋ in the ATOM mixed oxide was in favor of performing higher catalytic activity and thermal stability. The stability test indicated that Pd/MOL had the highest Pd dispersion and least coke formation on the active sites calculated by the Hz-chemisorption and TG results, which was considered to relate to its superior activity of POM to other catalysts.
基金Project supported by the Doctoral Foundation of Shandong Province (2004BS08001 ) Science Foundation of Ludong University (042901)
文摘Ce0.6Zr0.3RE0.1O2(RE = Y, La, Pr, Tb)solid solutions were prepared by co-precipitation technique and characterized by a series of methods. XRD and FT-Raman results show that Ce0.6Zr0.3RE0.1O2 has cubic fluorite structure. The different dopant ion radii bring different effect on the cell parameter of Ce0.6Zr0.3RE0 1O2. The X-ray photoelectron spec-troscopy (XPS) results show that the binding energy of Ce3d, Zr3d and O1s for Ce0.6Zr0.3RE0.1O2 rises compared with that for Ce0.6Zr0.4O2, indicating that dopant elements change chemistry environment of solid solutions which is available to improve redox performance. Compared with Pd/Ce0.6Zr0.4O2, doping Y and La does not change air/fuel (A/F) characteristic of TWCs, but doping Pr and Tb widens A/F operating window and makes HC, CO and NO have higher conversion. The light-off temperature of Pd/Ce0.6Zr0.3La0.1O2 is corresponding to that of Pd/Ce0.6Zr0.4O2. However, the light-off temperatures of Pd/Ce0.6Zr0.3M0.1O2(M = Y, Pr, Tb) are lower than that of Pd/Ce0.6Zr0.4O2, which keep much lower after high temperature treatments. Among Pd/Ce0.6Zr0.3RE0.1 O2, Pd/Ce0.6Zr0.3Tb0.1 O2 represents wider A/F operating window, higher conversion, lower light-off temperature and better high-temperature resistance.
基金Project supported by the Youth Natural Science Foundation of Yantai Normal University (042901)
文摘Ce0.6Zr0.4O2 solid solution was prepared by co-precipitation technique using hydrazine hydrate as precipitator.Various physico-chemical techniques such as XRD, FT-Raman, SEM, TEM, etc.were used to characterize the resultant powder.Meanwhile, its catalytic activity was evaluated in the synthesis of n-butyl acetate by the reaction of acetic acid and n-butyl alcohol.The results show that ceria-zirconia solid solution forms single cubic structure and its particle diameter is less than 100 nm.As a sort of solid acid, it possesses high catalytic activity and can be easily separated from reaction liquid.After it is used for ten times, its activity basically kees unchanging.
基金Supported by the National Natural Science Foundation of China(No.21476177)
文摘Ordered mesoporous ceria and ceria-zirconia with high specific surface area were prepared by nanocasting of a mesoporous silica KIT-6 template and used for soot oxidation.The as-synthesized ordered mesoporous ceria and ceria-zirconia were characterized by XRD,TEM,Nitrogen adsorption-desorption,Raman spectroscopy,and XRF.The results indicate that mesoporous ceria and ceria-zirconia possess highly ordered mesoporous structure,and exhibited excellent catalytic performance in soot oxidation.T_（50） of mesoporous ceria and ceria-zirconia are 475 and 470 ℃,respectively.The high catalytic activity of mesoporous materials can be attributed to the mesoporous structure and small crystallite size.Moreover,aged mesoporous materials exhibit high catalytic activity.
文摘A series of gold-based catalysts were prepared by deposition precipitation or incipient wetness impregnation on CexZ1-xO2 solid solutions （0.28≤x≤1.00）. The morphological and structural characterization of these catalysts were carried out with X-ray diffraction, trans- mission electron microscopy （TEM） analysis and physical adsorption technique, and their redox properties were studied by temperature programmed reduction using both H2 and CO as probe molecules. Two cycles of oxidation/reduction were carried out in order to evaluate the effects of redox aging and gold sintering on the oxygen exchange capability. As observed with other noble metals, gold enhanced and promoted the ceria reduction at lower temperatures. Reduction by CO was shown to be dependent on the fine dispersion of gold and to be nega- tively affected by the ageing process more than reduction with hydrogen. This might have implications in reactions like water gas shift and CO-PROX which involve CO as a main reactant.
基金the National High-Tech Research and Development Program of China(Grant No.2006AA06Z347)the National Natural Science Foundation of China(Grant Nos.20877006 and 20833011).
文摘A new method called ultrasonic-assisted membrane reaction(UAMR)was reported for the fabrication of ceria-zirconia solid solution.A series of ceria-zirconia solid solutions with different Ce/Zr molar ratios were prepared by the UAMR method and characterized by Xray diffraction(XRD),N2 adsorption,hydrogen temperature-programmed reduction(H2-TPR),scanning electron microscope(SEM),and transmission electron microscopy(TEM)techniques.The UAMR method proved to be superior,especially when the Ce/Zr molar ratio was lower than 1,in fabricating ceria-zirconia solid solutions with large BET surface area,high oxygen storage capacity(OSC),and low reduction temperature.
基金Project supported by the Beijing Nova Program(Z181100006218030)Major State Research Development Program of Hebei province(20374202D)。
文摘As the oxygen redox ability shows great effects on the catalytic performances of ceria-zirconia based materials,many strategies have been utilized to improve the oxygen storage capacity.Here in this study,we report a simple and facile approach to prepare a SO_(4)^(2-)-modified La,Y-doped ceria-zirconia material(SO/CZLY-f)with high oxygen storage capacity.Due to the additional redox process between SO_(4)^(2-)and S^(2-),oxygen storage capacity of SO/CZLY-f(745.3μmol O_(2)/g)is about 1.6 times higher than that of La,Ydoped ceria-zirconia material without SO_(4)^(2-)modification.Moreover,the catalytic activities and stability of the corresponding Pd-only three-way catalyst were measured.Compared to that of Pd@CZLY-f,the operation window of CO,full conversion temperature of HC and NO over Pd@SO/CZLY-f are obviously widened and lowered,respectively.After aging treatment at 1100℃for 4 h,the superiority of aged Pdloading composite is still maintained.
基金the National Natural Science Foundation of China(No.51502115)the Fundamental Research Ftmds for the Central Universities of China(No.JUSRP11708).
文摘Ru/Ce-Zr catalysts were prepared by impregnation of Ru on the hydrothermally synthesized Ce-Zr mixed oxide with different molar ratio of Ce/Zr.The resultant products were systematically characterized by inductively coupled plasma(ICP),X-ray diffraction(XRD),scanning electron microscopy(SEM)/energy dispersive spectrometry(EDS),H2-temperature programmed reduction(H2-TPR),NH3-temperature programmed desorption(NH3-TPD)and X-ray photoelectron spectroscopy(XPS).It was proved by H2-TPR and NH3-TPD that the introduction of Ru can improve the activity of oxygen of catalysts and the presence of Zr contributes to the increments of acid properties of catalysts.When the molar ratio of Ce-Zr was 8:4,the quantity of Ru was 0.9%(mass ratio),and the calcined temperature of catalysts was at 400℃,the removal rate of 90% for trichloroethylene(TCE)was reached at 250℃ for 5360 mg/m^3 TCE and the stability of the catalysts was investigated under the condition.The results showed that the high removal rate can be maintained for at least 90 h,which is promising for industrial application.
文摘Superfine composite powders of CeO2-ZrO2 (CZ) and CeO2-ZrO2-La2O3 (CZL) were prepared by hydrothermal method. The effects of pH?temperature and time for hydrothermal process on the performance of the resulting powders were studied. The optimized reaction parameters were on follows: the precursor′s pH≈9.0, hydrothermal temperature of 200 ℃ holding for 2 h. Thermal stable powders with average particle size smaller than 10 nm and specific surface area of 171 m2·g-1 were obtained. A BET specific surface area was still at 44 m2·g-1 after calcination at 1 000 ℃ for 6 hours.
