期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
双切向环流式旋风除尘器的分离效率与压降的研究 被引量:5
1
作者 王伟文 丁丽 李建隆 《青岛化工学院学报(自然科学版)》 2002年第3期39-42,共4页
以粉煤灰 -空气为实验物系 ,测定了Φ2 3 4mm双切向环流式旋风除尘器的除尘效率和压降。实验的入口气速为 1 8~ 2 8m·s- 1、含尘浓度为 6~ 2 0 g·m- 3 。结果表明 ,双切向环流式旋风除尘器比单切向环流式旋风除尘器的分离... 以粉煤灰 -空气为实验物系 ,测定了Φ2 3 4mm双切向环流式旋风除尘器的除尘效率和压降。实验的入口气速为 1 8~ 2 8m·s- 1、含尘浓度为 6~ 2 0 g·m- 3 。结果表明 ,双切向环流式旋风除尘器比单切向环流式旋风除尘器的分离效率有所提高 ,d50 为 2 .3 μm;压降在 70 0~ 1 2 0 0 Pa范围内 ,比单切向环流式旋风除尘器的压降低 2 0 0 Pa,处理量有所增大 ; 展开更多
关键词 旋风除尘器 双切向环流式 分离效率 压降 研究
下载PDF
日照作用下圆钢管混凝土柱截面温度场分析
2
作者 金怀印 杨晓 胡翔 《混凝土与水泥制品》 2016年第11期40-44,共5页
以湖南黄花国际机场新航站楼为原型,分析了圆钢管混凝土柱在日照作用下的截面温度场。并采用ABAQUS软件对不同直径的圆钢管混凝土在角柱和边柱受热工况下的截面温度场进行数值模拟。研究结果表明,在相同受热工况下,不同直径圆钢管混凝... 以湖南黄花国际机场新航站楼为原型,分析了圆钢管混凝土柱在日照作用下的截面温度场。并采用ABAQUS软件对不同直径的圆钢管混凝土在角柱和边柱受热工况下的截面温度场进行数值模拟。研究结果表明,在相同受热工况下,不同直径圆钢管混凝土柱的截面温度分布规律相近,角柱与边柱沿受热方向的截面温度分布规律相近,大直径柱以及边柱由于受热面积大导致截面平均温度较高。在此基础上,拟合得到角柱和边柱在日照作用下的截面温度场分布模式,计算值与有限元分析值吻合良好。 展开更多
关键词 日照作用 圆钢管混凝土柱 有限元分析 温度场分布模式
下载PDF
圆钢管混凝土柱框架节点抗剪承载力计算方法 被引量:4
3
作者 杨晓 金怀印 胡翔 《结构工程师》 北大核心 2017年第3期21-26,共6页
圆钢管混凝土(CFCT)柱承载力高、延性好,可与不同类型的混凝土梁、钢梁或钢-混凝土组合梁可靠连接,形成满足不同功能需求的CFCT柱框架结构。CFCT柱框架节点抗剪承载力主要由节点核心区混凝土、钢管和加劲构造等抗剪元件承担,并受柱轴压... 圆钢管混凝土(CFCT)柱承载力高、延性好,可与不同类型的混凝土梁、钢梁或钢-混凝土组合梁可靠连接,形成满足不同功能需求的CFCT柱框架结构。CFCT柱框架节点抗剪承载力主要由节点核心区混凝土、钢管和加劲构造等抗剪元件承担,并受柱轴压力影响。总结提出了CFCT柱框架节点的抗剪机理以及各抗剪元件的抗剪贡献计算方法。基于课题组前期完成的CFCT柱框架节点抗剪试验结果,确定了柱轴压力对节点承载力的定量影响,并提出了CFCT柱框架节点抗剪承载力计算方法。该方法计算结果与国内外相关试验结果吻合良好。 展开更多
关键词 圆钢管混凝土框架节点 抗剪机理 抗剪承载力 计算方法
下载PDF
A Practical Approach Based on Equal Area Criteria for Stability Analysis of Weak Networks with Wind Generation Penetration
4
作者 Rene Rossi Mohammad A.S. Masoum 《Journal of Energy and Power Engineering》 2012年第4期629-637,共9页
The performance of DFIG-based wind generation systems that interconnected to solid networks is well understood and prevalent in Europe and North America. However, the application of these renewable generating stations... The performance of DFIG-based wind generation systems that interconnected to solid networks is well understood and prevalent in Europe and North America. However, the application of these renewable generating stations to weak network has been examined in very limited occasions. Weak networks have a range of limitations from system capacities to CFCT restrictions which would need to be well understood prior to wind energy integration. Of particular interest would be how much wind generation could be integrated into a weak network prior to increasing voltage and frequency stability issues brought about by penetration issues. This paper introduces a simple and practical approach based on the equal area criteria to investigate the stability of weak networks. Simulation results that are presented to show the proposed approach is a viable preliminary assessment tool to determine system stability on weak networks with wind power penetration. 展开更多
关键词 Grid system weak system wind farm SWIS (south west interconnection system) cfct (critical fault clearing time) DG (distributed generation) EAC (equal area criteria).
下载PDF
Utilization of DFIG on an Islanded Power Generation and Distribution System
5
作者 Rene Rossi Mohammad Masoum 《Journal of Energy and Power Engineering》 2014年第1期166-175,共10页
The utilization of wind generation equipment, such as DFIGs (double fed induction generators), interconnected to islanded power generation and distribution systems is investigated in order to determine their effects... The utilization of wind generation equipment, such as DFIGs (double fed induction generators), interconnected to islanded power generation and distribution systems is investigated in order to determine their effects on the overall system operating characteristics and stability. The use of a stable power station (with high speed machines) will be critical in achieving fast and reliable transient response to network events, in particular, when large transient loads are expected on a continuous basis, i.e., industrial mining and mineral processing equipment. Simulation results of this paper assist in understanding how small power stations and wind generation equipment respond to large transients in an islanded network. In particular, detailed simulations and analyses will be presented on impacts of distributed wind generation units (1.5 MW DF1G) on the stability of a small weak network. The novelty of this paper is on detailed analyses and simulation of weak networks with interconnects DFIG's including their impacts on system stability under various transient operating conditions. 展开更多
关键词 Grid system weak network DG (distributed generation) DFIG (double fed induction generator) DOL (direct on line) VVVF (variable voltage variable frequency) cfct (critical fault clearing time).
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部