Since hydrate resources play a part of the stratigraphic framework structure in sediments,establishing a safe and economic method for hydrates exploitation remains the primary challenge to this day.Among the proposed ...Since hydrate resources play a part of the stratigraphic framework structure in sediments,establishing a safe and economic method for hydrates exploitation remains the primary challenge to this day.Among the proposed methods,the spontaneous displacement of CH_(4) from hydrate cages by CO_(2) seems to be a perfect mechanism to address gas production and CO_(2) storage,especially in today's strong demand for carbon reduction and replacing clean energy.After extensive lab researches,in the past decade,injecting a mixture of CO_(2) and small molecule gas has become a key means to enhance displacement efficiency and has great potential for application.However,there is a lack of in-depth research on gas flow in the reservoir,while the injected gas always passes through low-saturated hydrate areas with high permeability and then occurs gas channel in a short term,finally resulting in the decreases in gas production efficiency and produced gas quality.Therefore,we explored a new injection-production mode of alternate injection of N2 and CO_(2) in order to fully coordinate the advantages of N_(2) in enhanced hydrate decomposition and CO_(2) in solid storage and heat compensation.These alternate"taking"and"storing"processes perfectly repair the problem of the gas channel,achieving self-regulation effect of CH_(4) recovery and CO_(2) storage.The 3-D experimental results show that compared to the mixed gas injection,CH_(4) recovery is increased by>50%and CO_(2) storage is increased by>70%.Additionally,this alternate injection mode presented a better performance in CH_(4) concentration of produced gas and showed outstanding N_(2) utilization efficiency.Further,we analyzed its self-adaptive gas flow mechanism and proposed an application model of"one injection and multiple production".We look forward to this study accelerating the application of CO_(2)-CH_(4) replacement technology.展开更多
The cobalt precursor affects the catalytic performance of Co/SiO_2 catalyst remarkably. The catalyst prepared from cobalt acetate exhibits excellent activity, stability and resistance to carbon deposition.
In this work, the zeolite-Y was ion-exchanged by introducing silver cations into the framework of microsized nano-porous sodium zeolite-Y using a liquid-phase ion exchanged method. The Ag+ion-exchanged zeolite, was th...In this work, the zeolite-Y was ion-exchanged by introducing silver cations into the framework of microsized nano-porous sodium zeolite-Y using a liquid-phase ion exchanged method. The Ag+ion-exchanged zeolite, was then embedded into the Matrimid5218 matrix to form novel mixed matrix membranes(MMMs). The particles and MMMs were characterized by ultraviolet-visible diffuse reflectance spectroscopy(UV–vis DRS), N2adsorption–desorption isotherm, X-ray diffraction(XRD), Fourier transform infrared(FTIR) and scanning electron microscopy(SEM). Furthermore, the effects of filler content(0–20wt%) on pure and mixed gas experiments, feed pressure(2–20 bar) and operating temperature(35–75 oC)on CO2/CH4transport properties of Matrimid/Ag Y MMMs were considered. Characterization results confirmed an appropriate ion-exchange treatment of the zeolites. The SEM results confirmed the superior interfacial adhesion between polymer and zeolites, particularly in the case of Matrimid/Ag Y membranes.This is due to the proper silverous zeolite/Matrimid functional groups’ interactions. The gas permeation results showed that the CO2permeability increased about 123%, from 8.34 Barrer for pure Matrimid to18.62 Barrer for Matrimid/Ag Y(15 wt%). The CO2/CH4selectivity was improved about 66%, from 36.3 for Matrimid to 60.1 for Matrimid/Ag Y(15 wt%). The privileged gas separation performance of Matrimid/Ag Y(15 wt%) was the result of a combined effect of facilitated transport mechanism of Ag+ions as well as the intrinsic surface diffusion mechanism of Y-type zeolite. In order to survey the possibility of using the developed MMMs in industry, the CO2-induced plasticization effect and mixed gas experiment were accomplished. It was deduced that the fabricated MMMs could maintain the superior performance in actual operating conditions.展开更多
Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene wer...Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene were also found in the products. Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst. Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.展开更多
The synthesis of high value-added chemical products using CO_(2)and CH_(4)is a promising CO_(2)conversion technology that can reduce greenhouse gas emissions while also alleviating the energy crisis.However,problems s...The synthesis of high value-added chemical products using CO_(2)and CH_(4)is a promising CO_(2)conversion technology that can reduce greenhouse gas emissions while also alleviating the energy crisis.However,problems such as high energy consumption and strict reaction conditions in reforming process hinder the further development of the technology.In this work,carbon-nitrogen based composites were prepared for the first time according to the design principle from morphology to heterojunction,which is innovatively applied in the process of photocatalytic CH4reforming.Firstly,C_(3)N_(4)materials with different dimensions(D) are prepared and applied to a CO_(2)-CH_(4)photocatalytic system.Additionally,the 2D/2D TiO_(2)/g-C_(3)N_(4)heterostructure is constructed with the ultrasonic impregnation method to further improve charge generation,transfer,and separation efficiency.It is worth noting that the yield of CO reaches173.80 μmol g^(-1),and the catalytic performance is improved by 1546% compared to bulk C_(3)N_(4).Moreover,the physical and chemical properties of 2D/2D TiO_(2)/g-C_(3)N_(4)materials are studied using a variety of cha racterization methods.Furthermore,the work fu nction and adsorption energy of different C3N4/TiO_(2)models for CO_(2)adsorption are calculated by density functional theory(DFT).Then,a possible catalytic mechanism for photocatalytic CO_(2)and CH_(4) conversion is proposed based on DFT calculations and experimental results.This work provides a new technical route for the rapid conversion of CO_(2)and CH_(4) at room temperature,as well as a new research concept for achieving carbon neutrality.展开更多
氮化硅是一种良好的载体,具有较高的水热稳定性和机械稳定性,其表面的氨基基团能够较好地锚定金属,显著提高金属分散度。但是,商品氮化硅比表面积较低,对金属分散作用仍然有限。因此,以自制的高比表面积氮化硅(Si_(3)N_(4))为载体,通过...氮化硅是一种良好的载体,具有较高的水热稳定性和机械稳定性,其表面的氨基基团能够较好地锚定金属,显著提高金属分散度。但是,商品氮化硅比表面积较低,对金属分散作用仍然有限。因此,以自制的高比表面积氮化硅(Si_(3)N_(4))为载体,通过浸渍法制备了不同Ru负载量(质量分数分别为0.5%、1.0%和2.0%)的催化剂(分别为0.5%Ru/Si_(3)N_(4)、1.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)),并以商品氮化硅(Si_(3)N_(4)-C)为载体制备了2.0%Ru/Si_(3)N_(4)-C催化剂作为对照组。表征了催化剂的理化性质,测试了其在300℃、0.1 MPa下的CO_(2)加氢反应活性。结果显示,与Si_(3)N_(4)-C相比,Si_(3)N_(4)的比表面积较高(502 m^(2)/g),Si_(3)N_(4)作为载体显著提高了金属分散度,降低了金属粒径,催化剂暴露出更多的活性位点。0.5%Ru/Si_(3)N_(4)的金属粒径较小,展现出强的H_(2)吸附能力,H难以解吸,抑制了中间物种CO加氢生成CH_(4)。随着Ru负载量增加,金属粒径增大,催化剂的CH_(4)选择性更好。Ru/Si_(3)N_(4)系列催化剂中,2.0%Ru/Si_(3)N_(4)的CH_(4)选择性较高(98.8%)。空速为10000 m L/(g·h)时,0.5%Ru/Si_(3)N_(4)的CO选择性为88.2%。与2.0%Ru/Si_(3)N_(4)相比,2.0%Ru/Si_(3)N_(4)-C的金属粒径更大,活性位点较少,活性更低。2.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)-C的CO_(2)转化率分别为53.1%和9.2%。Si_(3)N_(4)有效提高了金属分散度,提高了催化剂的CO_(2)加氢反应活性;通过调控Ru负载量控制催化剂金属粒径,可实现对产物CO或CH_(4)选择性的调控。展开更多
基金financially supported by the National Natural Science Foundation of ChinaChina(Nos.22378424,22127812,U20B6005,52004136)+1 种基金the Science Foundation of China University of Petroleum,Beijing(No.2462023BJRC017)Hunan Provincial Department of Education Scientific Research Project(No.22B0310)。
文摘Since hydrate resources play a part of the stratigraphic framework structure in sediments,establishing a safe and economic method for hydrates exploitation remains the primary challenge to this day.Among the proposed methods,the spontaneous displacement of CH_(4) from hydrate cages by CO_(2) seems to be a perfect mechanism to address gas production and CO_(2) storage,especially in today's strong demand for carbon reduction and replacing clean energy.After extensive lab researches,in the past decade,injecting a mixture of CO_(2) and small molecule gas has become a key means to enhance displacement efficiency and has great potential for application.However,there is a lack of in-depth research on gas flow in the reservoir,while the injected gas always passes through low-saturated hydrate areas with high permeability and then occurs gas channel in a short term,finally resulting in the decreases in gas production efficiency and produced gas quality.Therefore,we explored a new injection-production mode of alternate injection of N2 and CO_(2) in order to fully coordinate the advantages of N_(2) in enhanced hydrate decomposition and CO_(2) in solid storage and heat compensation.These alternate"taking"and"storing"processes perfectly repair the problem of the gas channel,achieving self-regulation effect of CH_(4) recovery and CO_(2) storage.The 3-D experimental results show that compared to the mixed gas injection,CH_(4) recovery is increased by>50%and CO_(2) storage is increased by>70%.Additionally,this alternate injection mode presented a better performance in CH_(4) concentration of produced gas and showed outstanding N_(2) utilization efficiency.Further,we analyzed its self-adaptive gas flow mechanism and proposed an application model of"one injection and multiple production".We look forward to this study accelerating the application of CO_(2)-CH_(4) replacement technology.
文摘The cobalt precursor affects the catalytic performance of Co/SiO_2 catalyst remarkably. The catalyst prepared from cobalt acetate exhibits excellent activity, stability and resistance to carbon deposition.
文摘In this work, the zeolite-Y was ion-exchanged by introducing silver cations into the framework of microsized nano-porous sodium zeolite-Y using a liquid-phase ion exchanged method. The Ag+ion-exchanged zeolite, was then embedded into the Matrimid5218 matrix to form novel mixed matrix membranes(MMMs). The particles and MMMs were characterized by ultraviolet-visible diffuse reflectance spectroscopy(UV–vis DRS), N2adsorption–desorption isotherm, X-ray diffraction(XRD), Fourier transform infrared(FTIR) and scanning electron microscopy(SEM). Furthermore, the effects of filler content(0–20wt%) on pure and mixed gas experiments, feed pressure(2–20 bar) and operating temperature(35–75 oC)on CO2/CH4transport properties of Matrimid/Ag Y MMMs were considered. Characterization results confirmed an appropriate ion-exchange treatment of the zeolites. The SEM results confirmed the superior interfacial adhesion between polymer and zeolites, particularly in the case of Matrimid/Ag Y membranes.This is due to the proper silverous zeolite/Matrimid functional groups’ interactions. The gas permeation results showed that the CO2permeability increased about 123%, from 8.34 Barrer for pure Matrimid to18.62 Barrer for Matrimid/Ag Y(15 wt%). The CO2/CH4selectivity was improved about 66%, from 36.3 for Matrimid to 60.1 for Matrimid/Ag Y(15 wt%). The privileged gas separation performance of Matrimid/Ag Y(15 wt%) was the result of a combined effect of facilitated transport mechanism of Ag+ions as well as the intrinsic surface diffusion mechanism of Y-type zeolite. In order to survey the possibility of using the developed MMMs in industry, the CO2-induced plasticization effect and mixed gas experiment were accomplished. It was deduced that the fabricated MMMs could maintain the superior performance in actual operating conditions.
文摘Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene were also found in the products. Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst. Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.
基金The financial support from the National Natural Science Foundation of China (22178089)the Hunan Provincial Innovation Foundation for Postgraduate (CX20220392)。
文摘The synthesis of high value-added chemical products using CO_(2)and CH_(4)is a promising CO_(2)conversion technology that can reduce greenhouse gas emissions while also alleviating the energy crisis.However,problems such as high energy consumption and strict reaction conditions in reforming process hinder the further development of the technology.In this work,carbon-nitrogen based composites were prepared for the first time according to the design principle from morphology to heterojunction,which is innovatively applied in the process of photocatalytic CH4reforming.Firstly,C_(3)N_(4)materials with different dimensions(D) are prepared and applied to a CO_(2)-CH_(4)photocatalytic system.Additionally,the 2D/2D TiO_(2)/g-C_(3)N_(4)heterostructure is constructed with the ultrasonic impregnation method to further improve charge generation,transfer,and separation efficiency.It is worth noting that the yield of CO reaches173.80 μmol g^(-1),and the catalytic performance is improved by 1546% compared to bulk C_(3)N_(4).Moreover,the physical and chemical properties of 2D/2D TiO_(2)/g-C_(3)N_(4)materials are studied using a variety of cha racterization methods.Furthermore,the work fu nction and adsorption energy of different C3N4/TiO_(2)models for CO_(2)adsorption are calculated by density functional theory(DFT).Then,a possible catalytic mechanism for photocatalytic CO_(2)and CH_(4) conversion is proposed based on DFT calculations and experimental results.This work provides a new technical route for the rapid conversion of CO_(2)and CH_(4) at room temperature,as well as a new research concept for achieving carbon neutrality.
文摘氮化硅是一种良好的载体,具有较高的水热稳定性和机械稳定性,其表面的氨基基团能够较好地锚定金属,显著提高金属分散度。但是,商品氮化硅比表面积较低,对金属分散作用仍然有限。因此,以自制的高比表面积氮化硅(Si_(3)N_(4))为载体,通过浸渍法制备了不同Ru负载量(质量分数分别为0.5%、1.0%和2.0%)的催化剂(分别为0.5%Ru/Si_(3)N_(4)、1.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)),并以商品氮化硅(Si_(3)N_(4)-C)为载体制备了2.0%Ru/Si_(3)N_(4)-C催化剂作为对照组。表征了催化剂的理化性质,测试了其在300℃、0.1 MPa下的CO_(2)加氢反应活性。结果显示,与Si_(3)N_(4)-C相比,Si_(3)N_(4)的比表面积较高(502 m^(2)/g),Si_(3)N_(4)作为载体显著提高了金属分散度,降低了金属粒径,催化剂暴露出更多的活性位点。0.5%Ru/Si_(3)N_(4)的金属粒径较小,展现出强的H_(2)吸附能力,H难以解吸,抑制了中间物种CO加氢生成CH_(4)。随着Ru负载量增加,金属粒径增大,催化剂的CH_(4)选择性更好。Ru/Si_(3)N_(4)系列催化剂中,2.0%Ru/Si_(3)N_(4)的CH_(4)选择性较高(98.8%)。空速为10000 m L/(g·h)时,0.5%Ru/Si_(3)N_(4)的CO选择性为88.2%。与2.0%Ru/Si_(3)N_(4)相比,2.0%Ru/Si_(3)N_(4)-C的金属粒径更大,活性位点较少,活性更低。2.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)-C的CO_(2)转化率分别为53.1%和9.2%。Si_(3)N_(4)有效提高了金属分散度,提高了催化剂的CO_(2)加氢反应活性;通过调控Ru负载量控制催化剂金属粒径,可实现对产物CO或CH_(4)选择性的调控。
