Arrays of silicon micro\|tips were made by etching the p\|type (1 0 0) silicon wafers which had SiO 2 masks with alkaline solution. The density of the micro\|tips is 2×10 4 cm -2 . The Scanning Elect...Arrays of silicon micro\|tips were made by etching the p\|type (1 0 0) silicon wafers which had SiO 2 masks with alkaline solution. The density of the micro\|tips is 2×10 4 cm -2 . The Scanning Electron Microscope (SEM) photos showed that the tips in these arrays are uniform and orderly. The CN x thin film, with the thickness of 1.27μm was deposited on the silicon micro\|tip arrays by using the middle frequency magnetron sputtering technology. The SEM photos showed that the films on the tips are smoothly without particles. Keeping the sharpness of the tips will benefit the properties of field emission. The X\|ray photoelectron spectrum (XPS) showed that carbon, nitrogen and oxygen are the three major elements in the surfaces of the films. The percents of them are C: 69.5 %, N: 12.6 % and O: 17.9 %. The silicon arrays coated with CN x thin films had shown a good field emission characterization. The emission current intensity reached 3.2 mA/cm 2 at 32.8 V/μm, so it can be put into use. The result showed that the silicon arrays coated with CN x thin films are likely to be good field emission cathode. The preparation and the characterization of the samples were discussed in detail.展开更多
Renewable energy powered electrocatalytic water splitting is a promising strategy for hydrogen generation,and the design and development of high-efficiency and earth-abundant electrocatalysts for hydrogen evolution re...Renewable energy powered electrocatalytic water splitting is a promising strategy for hydrogen generation,and the design and development of high-efficiency and earth-abundant electrocatalysts for hydrogen evolution reaction(HER)are highly desirable.Herein,MoS2 nanoflowers decorated two-dimensional carbonitride-based MXene Ti3CN(OH)x hybrids have been constructed by etching and post-hydrothermal methods.The electrochemical performance of the as-obtained Ti_(3)CN(OH)_(x)@MoS_(2)hybrids having a quasi core-shell structure is fascinating:An overpotential of 120 mV and a Tafel slope of 64 mV∙dec^(−1)can be delivered at a current density of 10 mA∙cm^(−2).And after 3,000 cyclic voltammetry cycles,it can be seen that there is no apparent attenuation.Both the experimental results and density functional theory(DFT)calculations indicate that the synergetic effects between Ti_(3)CN(OH)x and MoS_(2)are responsible for the robust electrochemical HER performance.The electrons of-OH group in Ti_(3)CN(OH)x are transferred to MoS_(2),making the adsorption energy of the composite for H almost vanish.The metallic Ti_(3)CN(OH)x is also beneficial to the fast charge transfer kinetics.The construction of MXene-based hybrids with optimal electronic structure and unique morphology tailored to the applications can be further used in other promising energy storage and conversion devices.展开更多
文摘Arrays of silicon micro\|tips were made by etching the p\|type (1 0 0) silicon wafers which had SiO 2 masks with alkaline solution. The density of the micro\|tips is 2×10 4 cm -2 . The Scanning Electron Microscope (SEM) photos showed that the tips in these arrays are uniform and orderly. The CN x thin film, with the thickness of 1.27μm was deposited on the silicon micro\|tip arrays by using the middle frequency magnetron sputtering technology. The SEM photos showed that the films on the tips are smoothly without particles. Keeping the sharpness of the tips will benefit the properties of field emission. The X\|ray photoelectron spectrum (XPS) showed that carbon, nitrogen and oxygen are the three major elements in the surfaces of the films. The percents of them are C: 69.5 %, N: 12.6 % and O: 17.9 %. The silicon arrays coated with CN x thin films had shown a good field emission characterization. The emission current intensity reached 3.2 mA/cm 2 at 32.8 V/μm, so it can be put into use. The result showed that the silicon arrays coated with CN x thin films are likely to be good field emission cathode. The preparation and the characterization of the samples were discussed in detail.
基金supported by the National Natural Science Foundation of China(Nos.62004143 and 21902108)the Key Research and Development(R&D)Program of Hubei Province(No.2022BAA084)+1 种基金the Central Government Guided Local Science and Technology Development Special Fund Project(No.2020ZYYD033),the Natural Science Foundation of Hubei Province(No.2021CFB133)the Knowledge Innovation Program of Wuhan-Shuguang Project(No.2022010801020355).
文摘Renewable energy powered electrocatalytic water splitting is a promising strategy for hydrogen generation,and the design and development of high-efficiency and earth-abundant electrocatalysts for hydrogen evolution reaction(HER)are highly desirable.Herein,MoS2 nanoflowers decorated two-dimensional carbonitride-based MXene Ti3CN(OH)x hybrids have been constructed by etching and post-hydrothermal methods.The electrochemical performance of the as-obtained Ti_(3)CN(OH)_(x)@MoS_(2)hybrids having a quasi core-shell structure is fascinating:An overpotential of 120 mV and a Tafel slope of 64 mV∙dec^(−1)can be delivered at a current density of 10 mA∙cm^(−2).And after 3,000 cyclic voltammetry cycles,it can be seen that there is no apparent attenuation.Both the experimental results and density functional theory(DFT)calculations indicate that the synergetic effects between Ti_(3)CN(OH)x and MoS_(2)are responsible for the robust electrochemical HER performance.The electrons of-OH group in Ti_(3)CN(OH)x are transferred to MoS_(2),making the adsorption energy of the composite for H almost vanish.The metallic Ti_(3)CN(OH)x is also beneficial to the fast charge transfer kinetics.The construction of MXene-based hybrids with optimal electronic structure and unique morphology tailored to the applications can be further used in other promising energy storage and conversion devices.
