In the present paper, the effect of the combustion chamber design parameters on the improvement of combustion efficiency (the heat generated inside the combustion chamber) and the enhancement in the pollution rates (h...In the present paper, the effect of the combustion chamber design parameters on the improvement of combustion efficiency (the heat generated inside the combustion chamber) and the enhancement in the pollution rates (heat emissions) from a four-stroke, spark-ignition engine has been studied experimentally and theoretically. Two different programs, Gaseq and Ansys, were used to simulate the effect of the combustion chamber shape, turbulent kinetic energy, intake temperature, intake pressure, parity ratio, compression ratio, and engine speed on reducing specific fuel consumption in the engine, reducing carbon dioxide emissions, and increasing overall engine efficiency. The results showed increasing the intake temperature increased the amount of heat produced in the combustion chamber. This leads to increases in the overall efficiency of the engine, but leads to increasing the carbon dioxide and nitrogen oxide emissions. Increasing the intake pressure has a positive effect on the combustion temperature and pressure, but it has a negative effect on carbon dioxide and nitrogen oxides. Raising the pressure ratio improved the overall efficiency of the engine by increasing the combustion heat, but increasing specific fuel consumption and emissions. Also, increasing the engine speed above the permissible limit has an adverse effect on the spraying speed due to the piston speed being higher than the flame speed, which leads to a reduction in the engine brake torque. An increase in the compression ratio leads to higher fluid pressure and output capacity, but combustion methods occur. An increase in the kinetic energy of the turbulence leads to good combustion. A bowl in a piston has the highest rate of rotation and rotation compared to flat and hemispherical pistons. That is, the design of the cylinder head of this type leads to an improvement in the combustion efficiency and thus the efficiency of the engine.展开更多
The problem with fixed valve timing that the valve train is set by the automaker for peak efficiency running at a specific point in the engine’s operating range. When the vehicle is moving slower or faster than this ...The problem with fixed valve timing that the valve train is set by the automaker for peak efficiency running at a specific point in the engine’s operating range. When the vehicle is moving slower or faster than this ideal operating point the engine’s combustion cycle fails to properly burn the air/fuel mixture leading to considerably compromised engine performance and wastes fuel. Variable Valve Timing (VVT) is a solution developed to overcome this engine deficiency, dynamically altering the valve's opening and closing for optimal performance at any speed. The intension in this work is to contribute towards pursuing the development of variable valve timing (VVT) for improving the engine performance. This investigation covers the effect of exhaust valve opening (EVO), and closing (EVC) angle on engine performance and emissions. The aim is to optimize engine power and brake specific fuel consumption (BSFC) where the effect of engine speed has also been considered. Power, BMEP, BSFC, NO, and CO were calculated and presented to show the effect of varying valve timing on them for all the valve timing cases. The calculations of engine performance were carried out using the simulation and analysis engineering software: LOTUS”, and engine emissions were calculated using “ZINOX” program. Sensitivity analysis shows that the reduction of 10% of (EVO) angle gave a reduction of around 2.5% in power and volumetric efficiency, also a slight increase in nitrogen oxide (NO) and carbon monoxide (CO), while a 10% decrease in (EVC) causes around 1% improvement in Power. The effects of different (VVT) from the simulations are analyzed and compared with those in the reviewed literature.展开更多
The experimental tests were carried out on a single cylinder hydrogen fueled spark ignition(SI)generator set with different spark timings(4-20℃A bTDC),exhaust gas recirculation(EGR)up to 28% by volume and water injec...The experimental tests were carried out on a single cylinder hydrogen fueled spark ignition(SI)generator set with different spark timings(4-20℃A bTDC),exhaust gas recirculation(EGR)up to 28% by volume and water injection up to 1.95 kg/h(maximum water to fuel mass ratio of 8:1).The engine speed was kept constant of 3000 r/min.The NOx emission and thermal efficiency of engine with gasoline and hydrogen fuel operation at 1.4 kW power output are 5 g/kWh and 12.1 g/kWh,and 15% and 20.9% respectively.In order to reduce the NOx emission at source level,retarding spark timing,exhaust gas recirculation(EGR),and water injection techniques were studied.Nox emission decreased with spark timing retardation,EGR,and water injection.NOx emission with hydrogen at 1.4 kW power output decreased from 12.1 g/kWh with maximum brake torque(MBT)spark timing(10℃A bTDC)to 8.1 g/kWh with retarded spark timing(4℃A bTDC)due to decrease in the in-cylinder peak pressure and temperature.The Nox emission decreased to 6.1 g/kWh with 20% EGR due to thermal and chemical dilution effect.However,thermal efficiency decreased about 33% and 17% with spark timing retardation and 20EGR respectively as compared to that of MBT spark timing.But,in the case of water injection,the NOx emission decreased significantly without affecting the thermal efficiency of the engine and it is 5.6 g/kWh with water-hydrogen ratio of 4:1(water flow rate of 0.92 kg/h).Water injection is the best suitable method to reduce the NOx emission in a hydrogen fueled engine compared with the spark timing retardation and EGR technique.展开更多
文摘In the present paper, the effect of the combustion chamber design parameters on the improvement of combustion efficiency (the heat generated inside the combustion chamber) and the enhancement in the pollution rates (heat emissions) from a four-stroke, spark-ignition engine has been studied experimentally and theoretically. Two different programs, Gaseq and Ansys, were used to simulate the effect of the combustion chamber shape, turbulent kinetic energy, intake temperature, intake pressure, parity ratio, compression ratio, and engine speed on reducing specific fuel consumption in the engine, reducing carbon dioxide emissions, and increasing overall engine efficiency. The results showed increasing the intake temperature increased the amount of heat produced in the combustion chamber. This leads to increases in the overall efficiency of the engine, but leads to increasing the carbon dioxide and nitrogen oxide emissions. Increasing the intake pressure has a positive effect on the combustion temperature and pressure, but it has a negative effect on carbon dioxide and nitrogen oxides. Raising the pressure ratio improved the overall efficiency of the engine by increasing the combustion heat, but increasing specific fuel consumption and emissions. Also, increasing the engine speed above the permissible limit has an adverse effect on the spraying speed due to the piston speed being higher than the flame speed, which leads to a reduction in the engine brake torque. An increase in the compression ratio leads to higher fluid pressure and output capacity, but combustion methods occur. An increase in the kinetic energy of the turbulence leads to good combustion. A bowl in a piston has the highest rate of rotation and rotation compared to flat and hemispherical pistons. That is, the design of the cylinder head of this type leads to an improvement in the combustion efficiency and thus the efficiency of the engine.
文摘The problem with fixed valve timing that the valve train is set by the automaker for peak efficiency running at a specific point in the engine’s operating range. When the vehicle is moving slower or faster than this ideal operating point the engine’s combustion cycle fails to properly burn the air/fuel mixture leading to considerably compromised engine performance and wastes fuel. Variable Valve Timing (VVT) is a solution developed to overcome this engine deficiency, dynamically altering the valve's opening and closing for optimal performance at any speed. The intension in this work is to contribute towards pursuing the development of variable valve timing (VVT) for improving the engine performance. This investigation covers the effect of exhaust valve opening (EVO), and closing (EVC) angle on engine performance and emissions. The aim is to optimize engine power and brake specific fuel consumption (BSFC) where the effect of engine speed has also been considered. Power, BMEP, BSFC, NO, and CO were calculated and presented to show the effect of varying valve timing on them for all the valve timing cases. The calculations of engine performance were carried out using the simulation and analysis engineering software: LOTUS”, and engine emissions were calculated using “ZINOX” program. Sensitivity analysis shows that the reduction of 10% of (EVO) angle gave a reduction of around 2.5% in power and volumetric efficiency, also a slight increase in nitrogen oxide (NO) and carbon monoxide (CO), while a 10% decrease in (EVC) causes around 1% improvement in Power. The effects of different (VVT) from the simulations are analyzed and compared with those in the reviewed literature.
文摘The experimental tests were carried out on a single cylinder hydrogen fueled spark ignition(SI)generator set with different spark timings(4-20℃A bTDC),exhaust gas recirculation(EGR)up to 28% by volume and water injection up to 1.95 kg/h(maximum water to fuel mass ratio of 8:1).The engine speed was kept constant of 3000 r/min.The NOx emission and thermal efficiency of engine with gasoline and hydrogen fuel operation at 1.4 kW power output are 5 g/kWh and 12.1 g/kWh,and 15% and 20.9% respectively.In order to reduce the NOx emission at source level,retarding spark timing,exhaust gas recirculation(EGR),and water injection techniques were studied.Nox emission decreased with spark timing retardation,EGR,and water injection.NOx emission with hydrogen at 1.4 kW power output decreased from 12.1 g/kWh with maximum brake torque(MBT)spark timing(10℃A bTDC)to 8.1 g/kWh with retarded spark timing(4℃A bTDC)due to decrease in the in-cylinder peak pressure and temperature.The Nox emission decreased to 6.1 g/kWh with 20% EGR due to thermal and chemical dilution effect.However,thermal efficiency decreased about 33% and 17% with spark timing retardation and 20EGR respectively as compared to that of MBT spark timing.But,in the case of water injection,the NOx emission decreased significantly without affecting the thermal efficiency of the engine and it is 5.6 g/kWh with water-hydrogen ratio of 4:1(water flow rate of 0.92 kg/h).Water injection is the best suitable method to reduce the NOx emission in a hydrogen fueled engine compared with the spark timing retardation and EGR technique.