Bacterial infection is a major problem following bone implant surgery.Moreover,poly-l-lactic acid/carbon nanotube/hydroxyapatite(PLLA/CNT/HAP)bone scaffolds possess enhanced mechanical properties and show good bioacti...Bacterial infection is a major problem following bone implant surgery.Moreover,poly-l-lactic acid/carbon nanotube/hydroxyapatite(PLLA/CNT/HAP)bone scaffolds possess enhanced mechanical properties and show good bioactiv-ityregardingbonedefectregeneration.Inthisstudy,wesynthesizedsilver(Ag)-dopedCNT/HAP(CNT/Ag-HAP)nanohybrids via the partial replacing of calcium ions(Ca2+)in the HAP lattice with silver ions(Ag+)using an ion doping technique under hydrothermal conditions.Specifically,the doping process was induced using the special lattice structure of HAP and the abundant surface oxygenic functional groups of CNT,and involved the partial replacement of Ca2+in the HAP lattice by doped Ag+as well as the in situ synthesis of Ag-HAP nanoparticles on CNT in a hydrothermal environment.The result-ing CNT/Ag-HAP nanohybrids were then introduced into a PLLA matrix via laser-based powder bed fusion(PBF-LB)to fabricate PLLA/CNT/Ag-HAP scaffolds that showed sustained antibacterial activity.We then found that Ag+,which pos-sesses broad-spectrum antibacterial activity,endowed PLLA/CNT/Ag-HAP scaffolds with this activity,with an antibacterial effectiveness of 92.65%.This antibacterial effect is due to the powerful effect of Ag+against bacterial structure and genetic material,as well as the physical destruction of bacterial structures due to the sharp edge structure of CNT.In addition,the scaffold possessed enhanced mechanical properties,showing tensile and compressive strengths of 8.49 MPa and 19.72 MPa,respectively.Finally,the scaffold also exhibited good bioactivity and cytocompatibility,including the ability to form apatite layers and to promote the adhesion and proliferation of human osteoblast-like cells(MG63 cells).展开更多
The design of novel catalysts for efficient electroreduction of CO_(2) into valueadded chemicals is a promising approach to alleviate the energy crisis.Herein,we successfully modify the carbon nanotube by a layer of m...The design of novel catalysts for efficient electroreduction of CO_(2) into valueadded chemicals is a promising approach to alleviate the energy crisis.Herein,we successfully modify the carbon nanotube by a layer of mesoporous carbon shell anchored by nickel(Ni)nanoparticles.Ni species effectively enable carbon deposition derived from pyrolysis of surfactant 1-hexadecyl trimethyl ammonium bromide to form a mesoporous carbon shell.At the same time,Ni nanoparticles can be embedded in the mesoporous carbon shell due to the confinement effect.Owing to the dispersive Ni nanoparticles and N-doping active sites of mesoporous carbon,the as-prepared electrocatalyst exhibits exciting catalytic performance for the selective reduction of CO_(2) to carbon monoxide(CO)with a maximum Faradaic efficiency of 98%at a moderate overpotential of−0.81 V(vs.reversible hydrogen electrode)and a high partial current density of 60 mA cm^(−2) in H-cell with an aqueous electrolyte.展开更多
Carbon nanotubes (CNTs) based polymer composites have variety of engineering applications (electromagnetic shielding, antistatic coatings, high-strength low-density corrosion-resistant components, lightweight energy s...Carbon nanotubes (CNTs) based polymer composites have variety of engineering applications (electromagnetic shielding, antistatic coatings, high-strength low-density corrosion-resistant components, lightweight energy storage and many more);due to their excellent mechanical, electrical, chemical, magnetic, etc. properties. In the polymer nanocomposites CNTs are dispersed in the polymeric matrix. However the dispersion may be uniform or may not be uniform. The biggest challenge is the effective dispersion of individual CNTs in the polymer matrices, as CNTs tends to form clusters and bundles due to strong van der Waals’ forces of attraction. The aggregated structure continue until physical (Mechanical) or chemical modification (Encapsulation/surface modification) of CNTs. Few modification methods such as vigorous mixing of the polymers damages CNTs structure, and may hinder their properties. But these problems can be overcome by mechanical or chemical modification of CNTs surfaces. In the chemical modification, the modifier or the long tail surfactant may encapsulate and/or partially wrap the CNTs surfaces. In this review, recent work on CNTs based polymer nanocomposite is carried out with few modifiers/encapsulating agents. Incorporation of CNTs in polymer matrix changes the performance properties such as tensile strength, tensile modulus, elongation at break, toughness, Dynamic mechanical thermal analysis (DMTA), etc. The phase morphology of the composite materials throws light on the properties of CNTs based polymer nanocomposite. Moreover phase morphology may be directly correlated with the behavior of the material, hence reviewed here through transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Furthermore review is also carried out on the non-isothermal crystallization (DSC) and rheology of CNTs polymer nanocomposite.展开更多
Electrochemical reduction of CO_(2)(CO_(2)ER) to formate has been a promising route to produce value-added chemicals.Developing low-cost and efficient electrocatalysts with high product selectivity is still a grand ch...Electrochemical reduction of CO_(2)(CO_(2)ER) to formate has been a promising route to produce value-added chemicals.Developing low-cost and efficient electrocatalysts with high product selectivity is still a grand challenge.Herein,a novel Ni nanoparticles-anchored CNT coated by mesoporous carbon with yolk-shell structure (CNT/Ni@mC) catalysis was designed for CO_(2)ER.Ni nanoparticles were confined in the cavity between CNT and mesoporous carbon shell and the confined space can be controlled by tuning the amount of silica precursor.The mesoporous carbon shell and confined space are beneficial to charge transmission during CO_(2)ER.In contrast to previous studies,the CNT/Ni@mC catalyst presents selectivity toward formate rather than CO.Electrochemical in situ attenuated total reflection Fourier transform infrared spectroscopy measurements indicate the presence of a COO* intermediate that converts to formate under CO_(2)ER conditions.The well-defined structural feature of the confined space of the Ni-based catalyst for selective CO_(2)ER to formate may facilitate in-depth mechanistic understandings on structural factors that affect CO_(2)ER performance.展开更多
Magnesium(Mg)composites reinforced with carbon-based nanomaterial(CBN)often exhibit low density,enhanced strength,good conductivity,improved wear resistance,and excellent biocompatibility when compared to current indu...Magnesium(Mg)composites reinforced with carbon-based nanomaterial(CBN)often exhibit low density,enhanced strength,good conductivity,improved wear resistance,and excellent biocompatibility when compared to current industry Mg alloys.This review aims to critically evaluate recent developments in Mg-CBN composites and is divided into five sections:First,a brief introduction to Mg-CBN composites is provided,followed by a discussion of different fabrication techniques for these composites,including powder metallurgy,casting,friction stir processing,and selective laser melting.A particular focus is on the current processing challenges,including dispersion strategies to create homogeneous Mg-CBN composites.The effect of processing on the quantifying disorder in CBNs and distinguishing different sp2carbon materials is also highlighted.Then,the effect of CBN on various properties of Mg-CBN composites is thoroughly analyzed,and the strengthening efficiency of CNTs and graphene in the Mg matrix is examined.Finally,the potential applications of Mg-CBN composites in various industries are proposed,followed by a summary and suggestions for future research directions in the field of Mg-CBN composites.展开更多
Carbon Nanotubes (CNTs) have exceptional mechanical properties. They are the stiffest and strongest material, yet discovered, because of their high length to diameter ratio. In this paper a Representative Volume Eleme...Carbon Nanotubes (CNTs) have exceptional mechanical properties. They are the stiffest and strongest material, yet discovered, because of their high length to diameter ratio. In this paper a Representative Volume Element (RVE) model of CNT-silk composite is made. Then the orientations of the CNTs in the composite are varied and the effects of this variation are observed. The change is mainly observed between the interfaces of CNT and silk. Also there is a change in Young’s Modulus. COMSOL Multiphysics 4.2a is used for building model and performing simulations.展开更多
The effect of adding crumb rubber(CR)and carbon nanotubes(CNTs)on the low-temperature properties of virgin asphalt was studied.Using the force-ductility test and the bending beam rheometer(BBR)test,the deformation res...The effect of adding crumb rubber(CR)and carbon nanotubes(CNTs)on the low-temperature properties of virgin asphalt was studied.Using the force-ductility test and the bending beam rheometer(BBR)test,the deformation resistance and rheological properties of asphalt samples at low temperatures were evaluated,respectively.Based on the result of BBR test,the creep functions of the Burgers model and the Zener model were used to fit the low-temperature creep characteristics of the asphalt samples.Furthermore,the differential scanning calorimetry(DSC)test and the attenuated total reflection-Fourier transform infrared spectroscopy(ATR-FTIR)test were utilized to appraise the low-temperature stability and chemical properties of asphalt samples,respectively.The results showed that CR significantly improved the low-temperature properties of virgin asphalt,while CNTs had little effect.Moreover,during the degradation of CR,aromatic and aliphatic components were released.In particular,the aliphatic components of CR-modified asphalt were much higher than those of virgin asphalt,which had a significant effect on improving the low-temperature properties of the asphalt.The DSC test results showed that CR enhanced the low-temperature stability of the asphalt,while the addition of CNTs presented a slightly negative effect.展开更多
This paper provides an extension to the earlier work wherein a comparison between different models that had studied the effects of several parameters scaling on the performance of carbon nano tube field-effect transis...This paper provides an extension to the earlier work wherein a comparison between different models that had studied the effects of several parameters scaling on the performance of carbon nano tube field-effect transistors was presented. The evaluation for the studied models, with regard to the scaling effects, was to determine those which best reflect the very essence of carbon nano-tube technologies. Whereas the models subject this comparison （Fettoy, Roy, Stanford, and Southampton） were affected to varying degrees due to such parametric variations, the Stanford model was shown as still being valid for a wide range of chiralities and diameter sizes; a model that is also applicable for circuit simulations. In this paper, we present a comparative assessment of the various models subject to the study with regard to the effect of incorporating multiple carbon nanotubes in the channel region. We also assess the effect of oxide thickness on transistor performance in terms of the supply voltage threshold effects. Results leveraging our findings in this ongoing research endeavor reveal that many research efforts were not efficient to high degree due to high delay and not valid for circuit simulations.展开更多
基金the National Natural Science Foundation of China(Nos.52275393 and 51935014)Hunan Provincial Natural Science Foundation of China(Nos.2021JJ20061,2020JJ3047,and 2019JJ50588)+4 种基金Jiangxi Provincial Natural Science Foundation of China(No.20224ACB204013)the Project of State Key Laboratory of High Performance Complex ManufacturingTechnology Innovation Platform Project of Shenzhen Institute of Information Technology 2020(No.PT2020E002)Guangdong Province Precision Manufacturing and Intelligent Production Education Integration Innovation Platform(No.2022CJPT019)Independent Exploration and Innovation Project of Central South University(No.1053320220553).
文摘Bacterial infection is a major problem following bone implant surgery.Moreover,poly-l-lactic acid/carbon nanotube/hydroxyapatite(PLLA/CNT/HAP)bone scaffolds possess enhanced mechanical properties and show good bioactiv-ityregardingbonedefectregeneration.Inthisstudy,wesynthesizedsilver(Ag)-dopedCNT/HAP(CNT/Ag-HAP)nanohybrids via the partial replacing of calcium ions(Ca2+)in the HAP lattice with silver ions(Ag+)using an ion doping technique under hydrothermal conditions.Specifically,the doping process was induced using the special lattice structure of HAP and the abundant surface oxygenic functional groups of CNT,and involved the partial replacement of Ca2+in the HAP lattice by doped Ag+as well as the in situ synthesis of Ag-HAP nanoparticles on CNT in a hydrothermal environment.The result-ing CNT/Ag-HAP nanohybrids were then introduced into a PLLA matrix via laser-based powder bed fusion(PBF-LB)to fabricate PLLA/CNT/Ag-HAP scaffolds that showed sustained antibacterial activity.We then found that Ag+,which pos-sesses broad-spectrum antibacterial activity,endowed PLLA/CNT/Ag-HAP scaffolds with this activity,with an antibacterial effectiveness of 92.65%.This antibacterial effect is due to the powerful effect of Ag+against bacterial structure and genetic material,as well as the physical destruction of bacterial structures due to the sharp edge structure of CNT.In addition,the scaffold possessed enhanced mechanical properties,showing tensile and compressive strengths of 8.49 MPa and 19.72 MPa,respectively.Finally,the scaffold also exhibited good bioactivity and cytocompatibility,including the ability to form apatite layers and to promote the adhesion and proliferation of human osteoblast-like cells(MG63 cells).
基金the Natural Science Foundation of Hebei(B02020208088,H2020206514)S&T Program of Hebei(20544401D,20314401D,206Z4406G,21314402D,B2021208074)+1 种基金Tianjin Science and Technology Project(19YFSLQY00070)Natural Science Foundation of Shandong Province(ZR2021MB104).
文摘The design of novel catalysts for efficient electroreduction of CO_(2) into valueadded chemicals is a promising approach to alleviate the energy crisis.Herein,we successfully modify the carbon nanotube by a layer of mesoporous carbon shell anchored by nickel(Ni)nanoparticles.Ni species effectively enable carbon deposition derived from pyrolysis of surfactant 1-hexadecyl trimethyl ammonium bromide to form a mesoporous carbon shell.At the same time,Ni nanoparticles can be embedded in the mesoporous carbon shell due to the confinement effect.Owing to the dispersive Ni nanoparticles and N-doping active sites of mesoporous carbon,the as-prepared electrocatalyst exhibits exciting catalytic performance for the selective reduction of CO_(2) to carbon monoxide(CO)with a maximum Faradaic efficiency of 98%at a moderate overpotential of−0.81 V(vs.reversible hydrogen electrode)and a high partial current density of 60 mA cm^(−2) in H-cell with an aqueous electrolyte.
文摘Carbon nanotubes (CNTs) based polymer composites have variety of engineering applications (electromagnetic shielding, antistatic coatings, high-strength low-density corrosion-resistant components, lightweight energy storage and many more);due to their excellent mechanical, electrical, chemical, magnetic, etc. properties. In the polymer nanocomposites CNTs are dispersed in the polymeric matrix. However the dispersion may be uniform or may not be uniform. The biggest challenge is the effective dispersion of individual CNTs in the polymer matrices, as CNTs tends to form clusters and bundles due to strong van der Waals’ forces of attraction. The aggregated structure continue until physical (Mechanical) or chemical modification (Encapsulation/surface modification) of CNTs. Few modification methods such as vigorous mixing of the polymers damages CNTs structure, and may hinder their properties. But these problems can be overcome by mechanical or chemical modification of CNTs surfaces. In the chemical modification, the modifier or the long tail surfactant may encapsulate and/or partially wrap the CNTs surfaces. In this review, recent work on CNTs based polymer nanocomposite is carried out with few modifiers/encapsulating agents. Incorporation of CNTs in polymer matrix changes the performance properties such as tensile strength, tensile modulus, elongation at break, toughness, Dynamic mechanical thermal analysis (DMTA), etc. The phase morphology of the composite materials throws light on the properties of CNTs based polymer nanocomposite. Moreover phase morphology may be directly correlated with the behavior of the material, hence reviewed here through transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Furthermore review is also carried out on the non-isothermal crystallization (DSC) and rheology of CNTs polymer nanocomposite.
基金the Natural Science Foundation of Hebei(B02020208088,H_(2)020206514)the S&T Program of Hebei(20544401D,20314401D,206Z4406G,21314402D,B2021208074,21344601D)the Tianjin Science and Technology Project(19YFSLQY00070)。
文摘Electrochemical reduction of CO_(2)(CO_(2)ER) to formate has been a promising route to produce value-added chemicals.Developing low-cost and efficient electrocatalysts with high product selectivity is still a grand challenge.Herein,a novel Ni nanoparticles-anchored CNT coated by mesoporous carbon with yolk-shell structure (CNT/Ni@mC) catalysis was designed for CO_(2)ER.Ni nanoparticles were confined in the cavity between CNT and mesoporous carbon shell and the confined space can be controlled by tuning the amount of silica precursor.The mesoporous carbon shell and confined space are beneficial to charge transmission during CO_(2)ER.In contrast to previous studies,the CNT/Ni@mC catalyst presents selectivity toward formate rather than CO.Electrochemical in situ attenuated total reflection Fourier transform infrared spectroscopy measurements indicate the presence of a COO* intermediate that converts to formate under CO_(2)ER conditions.The well-defined structural feature of the confined space of the Ni-based catalyst for selective CO_(2)ER to formate may facilitate in-depth mechanistic understandings on structural factors that affect CO_(2)ER performance.
文摘Magnesium(Mg)composites reinforced with carbon-based nanomaterial(CBN)often exhibit low density,enhanced strength,good conductivity,improved wear resistance,and excellent biocompatibility when compared to current industry Mg alloys.This review aims to critically evaluate recent developments in Mg-CBN composites and is divided into five sections:First,a brief introduction to Mg-CBN composites is provided,followed by a discussion of different fabrication techniques for these composites,including powder metallurgy,casting,friction stir processing,and selective laser melting.A particular focus is on the current processing challenges,including dispersion strategies to create homogeneous Mg-CBN composites.The effect of processing on the quantifying disorder in CBNs and distinguishing different sp2carbon materials is also highlighted.Then,the effect of CBN on various properties of Mg-CBN composites is thoroughly analyzed,and the strengthening efficiency of CNTs and graphene in the Mg matrix is examined.Finally,the potential applications of Mg-CBN composites in various industries are proposed,followed by a summary and suggestions for future research directions in the field of Mg-CBN composites.
文摘Carbon Nanotubes (CNTs) have exceptional mechanical properties. They are the stiffest and strongest material, yet discovered, because of their high length to diameter ratio. In this paper a Representative Volume Element (RVE) model of CNT-silk composite is made. Then the orientations of the CNTs in the composite are varied and the effects of this variation are observed. The change is mainly observed between the interfaces of CNT and silk. Also there is a change in Young’s Modulus. COMSOL Multiphysics 4.2a is used for building model and performing simulations.
基金the support from the National Natural Science Foundation of China (Grant No.52078051)the Technology Innovation Project of Department of Industry and Information Technology of Shandong Province (Grant No.Lugongxinji (2020) 8)+2 种基金the Transportation Department of Shandong Province (Grant No.Lujiaokeji (2017) 28)the Traffic Science and Technology Project of Xixian New District Management Committee of Shaanxi Province (2017 44)the Zhuhai Transportation Group Co.Ltd.(JT-HG-2020-21)
文摘The effect of adding crumb rubber(CR)and carbon nanotubes(CNTs)on the low-temperature properties of virgin asphalt was studied.Using the force-ductility test and the bending beam rheometer(BBR)test,the deformation resistance and rheological properties of asphalt samples at low temperatures were evaluated,respectively.Based on the result of BBR test,the creep functions of the Burgers model and the Zener model were used to fit the low-temperature creep characteristics of the asphalt samples.Furthermore,the differential scanning calorimetry(DSC)test and the attenuated total reflection-Fourier transform infrared spectroscopy(ATR-FTIR)test were utilized to appraise the low-temperature stability and chemical properties of asphalt samples,respectively.The results showed that CR significantly improved the low-temperature properties of virgin asphalt,while CNTs had little effect.Moreover,during the degradation of CR,aromatic and aliphatic components were released.In particular,the aliphatic components of CR-modified asphalt were much higher than those of virgin asphalt,which had a significant effect on improving the low-temperature properties of the asphalt.The DSC test results showed that CR enhanced the low-temperature stability of the asphalt,while the addition of CNTs presented a slightly negative effect.
文摘This paper provides an extension to the earlier work wherein a comparison between different models that had studied the effects of several parameters scaling on the performance of carbon nano tube field-effect transistors was presented. The evaluation for the studied models, with regard to the scaling effects, was to determine those which best reflect the very essence of carbon nano-tube technologies. Whereas the models subject this comparison （Fettoy, Roy, Stanford, and Southampton） were affected to varying degrees due to such parametric variations, the Stanford model was shown as still being valid for a wide range of chiralities and diameter sizes; a model that is also applicable for circuit simulations. In this paper, we present a comparative assessment of the various models subject to the study with regard to the effect of incorporating multiple carbon nanotubes in the channel region. We also assess the effect of oxide thickness on transistor performance in terms of the supply voltage threshold effects. Results leveraging our findings in this ongoing research endeavor reveal that many research efforts were not efficient to high degree due to high delay and not valid for circuit simulations.
