Estimating the Macroeconomic Costs of CO_2 Emission Reduction in China Based on Multi-objective Programming

This paper estimates the macroeconornic costs of CO2 emission reduction in China employing the input-output analysis with the multi-objective programming approach. The results show that the effect of reducing CO2 emissions on China＇s economy is significant. Under the present conditions, the estimated macroeconomic costs of CO2 emission reduction in 2010 for China are approximately 3,100-4,024 RMB t-1. The stronger the abatement actions, the higher the macroeconomic costs of per unit emission reduction would be. Excavation industry, oil industry, chemical industry, and metal smelting industry have high potential to abate their CO2 emissions.

Energy savings and CO_2 emission reduction by using geothermal heat pumps

The renewable energy will play significant role in the world primary energy consumption in the future. Geothermal energy is immense with 5 000 EJ/a of technical potential, and geothermal heat pumps (GHPs) are one of the fastest growing applications of renewable energy in the world with annual increases of 10 % and much faster in China. With high coefficient of performance (COP) up to 6, GHPs make efficiency of primary energy more than 240 % with assumed a 40 % of electricity generation efficiency, which means energy savings and CO2 emission reduction. In this paper,the geothermal resources and its utilization are talked about, and GHPs technology was introduced. Due to its high efficiency, there will be energy savings by using GHPs. There is also CO2 emission reduction because of using geothermal heat pumps, which is analyzed in the end.

Study on CO_2 Emission Reduction from Chinese Coal-Fired Power Plants Between 1993 and 2010

Based on the Chinese thermal coal and power generation data,such as ultimate analysis,proximate analysis,low heat value(LHV)on as received basis,power generation volume,thermal coal consumption volume and net coal consumption rate,several mathematical models for calculating CO 2 reduction by Chinese coal-fired power plants are established.Calculations of the CO 2 emission factor(CEF),the CO 2 emission volume and reduction volume are made according to these models.The calculation results reveal that between 1993 and 2010,the CO 2 emission volume reached 31.069 Gt,reduced by 0.439 Gt,averaging 28.83 Mt each year.

An efficient methodology for utilization of K-feldspar and phosphogypsum with reduced energy consumption and CO2 emissions

The issues of reducing CO_2 emissions, sustainably utilizing natural mineral resources, and dealing with industrial waste offer challenges for sustainable development in energy and the environment. We propose an efficient methodology via the co-reaction of K-feldspar and phosphogypsum for the extraction of soluble potassium salts and recovery of SO_2 with reduced CO_2 emission and energy consumption. The results of characterization and reactivity evaluation indicated that the partial melting of K-feldspar and phosphogypsum in the hightemperature co-reaction significantly facilitated the reduction of phosphogypsum to SO_2 and the exchange of K^+(K-feldspar) with Ca^(2+)(CaSO_4 in phosphogypsum). The reaction parameters were systematically investigated with the highest sulfur recovery ratio of ~ 60% and K extraction ratio of ~ 87.7%. This novel methodology possesses an energy consumption reduction of ~ 28% and CO_2 emission reduction of ~ 55% comparing with the present typical commercial technologies for utilization of K-feldspar and the treatment of phosphogypsum.

Ordered cone-structured tin directly grown on carbon paper as efficient electrocatalyst for CO_(2) electrochemical reduction to formate

The conversion of carbon dioxide to chemicals by the electrochemical reactions(ERC)is an efficient solution to the current energy crisis and excess CO_(2) emissions.It is still a great challenge and of significance to synthesize a highly selective,efficient,and non-noble metal electrocatalyst that facilitates the ERC reaction.A novel triton X-100(C_(14)H_(22)O(C_(2)H_(4)O)n)assisted electrodeposition method was developed to synthesize the ordered cone-structured tin(OCSn)electrocatalysts with controllable morphology and structure.The results suggest that Triton X-100 plays an important role in directing the structure of the Sn electrocatalysts during the electrodeposition process.The OCSn synthesized at 60 m A cm^(-2) achieves the best performances.It selectively catalyzes the ERC on the onset potential about 110 m V lower than Sn synthesized without Triton X-100.In 0.5 M Na HCO_(3),high faradaic efficiency(92%)for formate product on OCSn has been achieved.More prominently,the catalyst presents excellent stability,showing no performance deterioration during 30 h electrolysis.This work provides an efficient,green,and scalable synthesis method of the electrocatalyst for CO_(2) reduction to formate.

Simulation and Experiment for Oxygen-enriched Combustion Engine Using Liquid Oxygen to Solidify CO2

For capturing and recycling of CO2 in the internal combustion engine, Rankle cycle engine can reduce the exhaust pollutants effectively under the condition of ensuring the engine thermal efficiency by using the techniques of spraying water in the cylinder and optimizing the ignition advance angle. However, due to the water spray nozzle need to be installed on the cylinder, which increases the cylinder head design difficulty and makes the combustion conditions become more complicated. In this paper, a new method is presented to carry out the closing inlet and exhaust system for internal combustion engines. The proposed new method uses liquid oxygen to solidify part of cooled CO2 from exhaust system into dry ice and the liquid oxygen turns into gas oxygen which is sent to inlet system. The other part of CO2 is sent to inlet system and mixed with oxygen, which can reduce the oxygen-enriched combustion detonation tendency and make combustion stable. Computing grid of the IP52FMI single-cylinder four-stroke gasoline-engine is established according to the actual shape of the combustion chamber using KIVA-3V program. The effects of exhaust gas recirculation （EGR） rate are analyzed on the temperatures, the pressures and the instantaneous heat release rates when the EGR rate is more than 8%. The possibility of enclosing intake and exhaust system for engine is verified. The carbon dioxide trapping device is designed and the IP52FMI engine is transformed and the CO2 capture experiment is carried out. The experimental results show that when the EGR rate is 36% for the optimum EGR rate. When the liquid oxygen of 35.80-437.40 g is imported into the device and last 1-20 min, respectively, 21.50-701.30 g dry ice is obtained. This research proposes a new design method which can capture CO2 for vehicular internal combustion engine.

ComplexTrans-Global Rail-Road Transportation System Economical and Clustered Individual and Individualised Public Transport also Prevents the Spread of Covid 19

Land transport can no longer meet the requirements.European transport can be described by these words−crowded motorways and cities,dangerous emissions,ubiquitous traffic accidents,delays,expensive railways.Solutions are being sought to transfer a large part of passengers and especially freight transport to(high-speed)rail,and efforts are moving towards electromobility,car-sharing,5G-connectivity,autonomous driving,MaaS(Mobility as a Service)-coordinated transport or hyperloop-type solutions.However,all these solutions have additional challenges and limitations.Solutions are not being searched where they really exist-in the mutual adaptation of road and rail vehicles and their deep cooperation.The ComplexTrans project shows that simply adapting the dimensions and functions of road and rail vehicles can eliminate(or at least significantly reduce)all the problems of existing land transport.The main features of the ComplexTrans system are sufficient parking spaces,reduction of urban and non-urban congestion,electric vehicles with unlimited range and cheaper than standard cars,cheaper and more accessible battery charging,“autonomous ride”,solving the overlap between passenger and freight rail transport and making it self-financing,transferring intercity freight transport to rail,replacing part of continental air transport and many others.The cost-effective and clustered individual transport and individualised public transport of the ComplexTrans system also bring very significant reductions in the risk of transmission of covid-19 and other contagious diseases during transport.

Global low-carbon transition and China's response strategies

The Paris Agreement establishes a new mechanism for post-2020 global climate governance, and sets long-term goals for global response to climate change, which will accelerate worldwide low-carbon transformation of economic development pattern, promote the revolutionary reform of energy system, boost a fundamental change in the mode of social production and consumption, and further the civilization of human society from industrial civilization to eco-civilization. The urgency of global low-carbon transition will reshape the competition situation of world's economy, trade and technology. Taking the construction of eco-civilization as a guide, China explores green and low-carbon development paths,establishes ambitious intended nationally determined contribution(INDC) targets and action plans, advances energy production and consumption revolution, and speeds up the transformation of economic development pattern. These strategies and actions not only confirm to the trend of the world low-carbon transition, but also meet the intrinsic requirements for easing the domestic resources and environment constraints and realizing sustainable development. They are multi-win-win strategies for promotion of economic development and environmental protection and mitigation of carbon emissions. China should take the global long-term emission reduction targets as a guide, and formulate medium and long-term low-carbon development strategy, build the core competitiveness of low-carbon advanced technology and development pattern, and take an in-depth part in global governance so as to reflect the responsibility of China as a great power in constructing a community of common destiny for all mankind and addressing global ecological crisis.

Small Scale Refrigerators and Freezers： Thermal Improvements in the Envelope

Like in other sectors of activity, the sustainability in refrigeration systems is a mandatory goal to achieve, namely at house holdings, bars and restaurants, where small-scale refrigerators and freezers are widely used. The aim of this work is to demonstrate experimentally, trough measurements carried out in these equipments, the improvement that can be achieved if several modifications are implemented in traditional household refrigeration systems. In addition, it was also simulated and analysed experimentally a slightly different equipment, a refrigeration system used for draught beverages. Both systems work on a single vapour compression refrigeration with R-134a as working fluid. In the end, by implemented the modifications tested in the virtual model, it was possible to improve their thermal behaviour, a decrease in electrical energy consumption, as well as, the associated CO2 emissions reduction can be attained. In this project, the CFD （Computational Fluid Dynamics） soffware--ANSYS Fluent was used to simulate the ambient temperature and velocity fields inside the refrigerator and in that way to validate the measured results.

Low-carbon transition of iron and steel industry in China:Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO2 emission sectors, China’s iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO2 emissions of the iron and steel industry have been explored, but the relationships between CO2 abatement,investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO2 emissions, and that investment expansion showed a negative impact on CO2 emission reduction. It was also argued with empirical evidence that a good economic situation favored CO2 abatement in China’s iron and steel industry, while achieving CO2 emission reduction in this industrial sector did not necessarily threaten economic growth.This shed light on the dispute over balancing emission cutting and economic growth.Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO2 abatement.

Ecological analysis of a typical farm-scale biogas plant in China

The aim of this work was to present the common anaerobic digestion technologies in a typical farm-scale biogas plant in China. The comprehensive benefits of most biogas plants in China have not been fully assessed in past decades due to the limited information of the anaerobic digestion processes in biogas plants. This paper analyzed four key aspects （i.e., operational perfor- mance, nonrenewable energy （NE） savings, CO2 emission reduction （CER） and economic benefits （EBs）） of a typical farm-scale biogas plant, where beef cattle manure was used as feedstock. Owing to the monitoring system, stable operation was achieved with a hydraulic retention time of 18-22 days and a production of 876,000 m3 of biogas and 37,960t of digestate fertilizer annually. This could substantially substitute for the nonrenewable energy and chemical fertilizer. The total amount of NE savings and CER derived from biogas and digestate fertilizer was 2.10× 10^7 MJ （equivalent to 749.7 tee） and 9.71 × 10^5 kg, respectively. The EBs of the biogas plant was 6.84× 10^5 CNY.yr^-1 with an outputs-to-inputs ratio of 2.37. As a result, the monitoring system was proved to contribute significantly to the sound management and quantitative assessment of the biogas plant. Biogas plants could produce biogas which could be used to substitute fossil fuels and reduce the emissions of greenhouse gases, and digestate fertilizer is also an important bio-product.