Development of CO2 Selective Poly（Ethylene Oxide）-Based Membranes： From Laboratory to Pilot Plant Scale

Membrane gas separation is one of the most promising technologies for the separation of carbon dioxide （CO2） from various gas streams. One application of this technology is the treatment of flue gases from combustion processes for the purpose of carbon capture and storage. For this application, poly（ethylene oxide）-containing block copolymers such as Pebax or PolyActiveTM polymer are well suited. The thin-film composite membrane that is considered in this overview employs PolyActiveTM polymer as a selective layer material. The membrane shows excellent CO2 permeances of up to 4 m^3（STP）.（m^2·h·bar）^-1 （1 bar = 105 Pa） at a carbon dioxide/nitrogen （CO2/N2） selectivity exceeding 55 at ambient temperature. The membrane can be manufactured reproducibly on a pilot scale and mounted into fiat-sheet membrane modules of different designs. The operating performance of these modules can be accurately predicted by specifically developed simulation tools, which employ single-gas permeation data as the only experimental input. The performance of membranes and modules was investigated in different pilot plant studies, in which flue gas and biogas were used as the feed gas streams. The investigated processes showed a stable separation performance, indicating the applicability of PolyActiveTM polymer as a membrane material for industrialscale gas processing.

Cost analysis of air capture driven by wind energy under different scenarios

Reducing the concentration of carbon dioxide(CO2) in the air can effectively alleviate climate change.Air capture,which captures CO2 directly from the air in an industrial process,is an alternative option to address climate change.The results of recent studies on the energy demand in CO2 capture process and the costs of CO2transport and CO2 storage in air capture are analyzed in this paper.Considering renewable energy will not produce additional CO2 in the process of utilization,the electric energy in CO2 capture process of air capture driven by wind energy is different from that of carbon capture and storage.Taking externalities of renewable energy intoaccount,the trading price of CO2 emission is taken to assess the cost of electric energy in CO2 capture of air capture driven by wind energy.Finally,the total cost and the total cost savings of air capture driven by wind energy under different scenarios are analyzed.

Reactive Transport Modeling of Long-Term CO2 Sequestration Mechanisms at the Shenhua CCS Demonstration Project,China

Carbon dioxide injection into deep saline aquifers results in a variety of strongly coupled physical and chemical processes. In this study, reactive transport simulations using a 2-D radial model were performed to investigate the fate of the injected CO2, the effect of CO2-water-rock interactions on mineral alteration, and the long-term CO2 sequestration mechanisms of the Liujiagou Formation sandstone at the Shenhua CCS（carbon capture and storage） pilot site of China. Carbon dioxide was injected at a constant rate of 0.1 Mt/year for 30 years, and the fluid flow and geochemical transport simulation was run for a period of 10 000 years by the TOUGHREACT code according to the underground conditions of the Liujiagou Formation. The results show that different trapping phases of CO2 vary with time. Sensitivity analyses indicate that plagioclase composition and chlorite presence are the most significant determinants of stable carbonate minerals and CO2 mineral trapping capacity. For arkosic arenite in the Liujiagou Formation, CO2 can be immobilized by precipitation of ankerite, magnesite, siderite, dawsonite, and calcite for different mineral compositions, with Ca（2＋）, Mg（2＋）, Fe（2＋） and Na＋ provided by dissolution of calcite, albite（or oligoclase） and chlorite. This study can provide useful insights into the geochemistry of CO2 storage in other arkosic arenite（feldspar rich sandstone） formations at other pilots or target sites.