Synthetically quantitative evaluation function of characteristic parameters on CO_2 arc welding process

The statistical probability and their variation regularity of the measurable characteristic parameters in the CO 2 arc welding droplet short circuiting transfer process have been studied. The statistical analysis shows that the sensitivity of each characteristic parameter with regard to the variation of the short circuiting transfer process is different. The sensitivity of 4 kinds among these characteristic parameters is more intense than that of the short circuiting transfer frequency. In order to take account of the synthetic influence of these characteristic parameters, by means of the characteristic parameters synthetic value, a quantitative evaluation function is built up to describe and evaluate the short circuiting transfer process of CO 2 arc welding in real time. The testing shows that the evaluation function can give a suitable synthetic valuation for the short circuiting transfer process with a variety of welding variables.

DETECTION AND ANALYSIS OF WELD POOL SHAPE FOR CO_2 SHORT CIRCUITING ARC WELDING

A general industrial CCD( ICCD) camera is redesigned to detect the weld pool without arc at the period of short circuiting, so that the interference of arc and spatter during CO2 short circuiting arc welding is eliminated. Through the analysis of weld pool image, both size parameters (such as weld pool area A, weld pool length L1, L2 and weld pool breadth b) and contour parameters (b, which describe the curves of weld pool boundany) ,which could indicate the shape features of weld pool, had been defined to express weld pool information quantitatively. The investigation of the relationships between weld pool shape parameters and welding process parameters may be beneficial to the quality control of CO2 welding.

Simulation of droplet transfer process and current waveform control of CO_2 arc welding

A simulation system used in the arc welding short circuit transfer process and current waveform control process was developed in this paper. The simulation results are basically consistent with welding technical experiments. The simulation system can be used to simulate and test the current waveform control parameters with welding variables. By this simulation system, the influence regularities of the current waveform control parameters in the CO 2 arc welding droplet short circuit transfer process can be got. Moreover, the basic mode of real time current waveform control can be also established by the simulation testing.

A new simulation model and its application in CO_2 short-circuiting transfer welding

A new simulation model of CO 2 short circuiting transfer welding may be employed to develop a new pattern of welding machine and to predict welding process parameters to obtain the optimum welding technology properties. In this paper, a new simulating model is developed according to the AWP (adapting welding physics process) waveform control method. Good agreement is shown between the predicted and experimentally determined results. The model will make an important promotion in the development of CO 2 arc welding technique.

Research on the Welding Process of 590MPa Grade High Strength Automobile Beam Steel

590 MPa automobile beam steel strips are used mainly to manufacture the longitudinal beam of trucks.It’s welding properties are critical to the safety of truck.The microstructure and mechanical properties of welding joints processed by CO 2 arc welding with different welding parameters were studied.The results showed that the welding joints were weak when welding heat input were small and the non metal inclusions were found in the weld joints when welding heat input are big.The quality of the welding joints is good enough at 170A of the arc current and 24V of the arc voltage.Keeping the other welding parameters fixed,the incomplete fusion defect occurred in the welding joint with backward welding,but the quality of the welding joint is good with forward welding.