An improved correlation to determine minimum miscibility pressure of CO2–oil system

An accurate and reliable estimation of minimum miscibility pressure(MMP) of CO2-oil system is a critical task for the design and implementation of CO2 miscible displacement process.In this study,an improved CO2-oil MMP correlation was developed to predict the MMP values for both pure and impure CO2 injection cases based on ten influential factors,i.e.reservoir temperature(TR),molecular weight of C7+oil components(MWC7+),mole fraction of volatile oil components(xvol),mole fraction of C2-C4 oil components(xC2-C4),mole fraction of C5-C6 oil components(xCs-5-C6),and the gas stream mole fractions of CO2(yCO2),H2S(yH2S),C1(yC1),hydrocarbons(yHC)and N2(yN2).The accuracy of the improved correlation was evaluated against experimental data reported in literature concurrently with those estimated by several renowned correlations.It was found that the improved correlation provided higher prediction accuracy and consistency with literature experimental data than other literature correlations.In addition,the predictive capability of the improved correlation was further validated by predicting an experimentally measured CO2-Oil MMP data,and it showed an accurate result with the absolute deviation of 4.15%.Besides,the differential analysis of the improved correlation was analyzed to estimate the impact of parameters uncertainty in the original MMP data on the calculated results.Also,sensitivity analysis was performed to analyze the influence of each parameter on MMP qualitatively and quantitatively.The results revealed that the increase of xC2-C4,xC5-C6 and yH2 S lead to the decrease of MMP,while the increase of TR,MWC7+,xvol,yCO2,YC1,yHC and yN2 tend to increase the MMP.Overall,the relevance of each parameter with MMP follows the order of TR> xC5-C6> MWC7+> xvol> yH2 S> yHC> yCO2>yC1>yN2>xC2-C4.

A STREAMLINE-BASED PREDICTIVE MODEL FOR ENHANCED-OIL-RECOVERY POTENTIALITY

A pseudo-three-dimensional model of potentiality prediction is proposed for enhanced oil recovery, based on the streamline method described in this article. The potential distribution of the flow through a porous medium under a complicated boundary condition is solved with the boundary element method. Furthermore, the method for tracing streamlines between injection wells and producing wells is presented. Based on the results, a numerical solution can be obtained by solving the seepage problem of the stream-tube with consideration of different methods of Enhanced Oil Recovery（EOR）. The advantage of the method given in this article is that it can obtain dynamic calculation with different well patterns of any shape by easily considering different physicochemical phenomena having less calculation time and good stability. Based on the uniform theory basis-streamline method, different models, including CO2 miscible flooding, polymer flooding, alkaline/surfactant/polymer flooding and microbial flooding, are established in this article.