Quantification of the adulteration concentration of palm kernel oil in virgin coconut oil using near-infrared hyperspectral imaging

The adulteration concentration of palm kernel oil(PKO)in virgin coconut oil(VCO)was quantified using near-infrared(NIR)hyperspectral imaging.Nowadays,some VCO is adulterated with lower-priced PKO to reduce production costs,which diminishes the quality of the VCO.This study used NIR hyperspectral imaging in the wavelength region 900-1,650 nm to create a quantitative model for the detection of PKO contaminants(0-100%)in VCO and to develop predictive mapping.The prediction equation for the adulteration of VCO with PKO was constructed using the partial least squares regression method.The best predictive model was pre-processed using the standard normal variate method,and the coefficient of determination of prediction was 0.991,the root mean square error of prediction was 2.93%,and the residual prediction deviation was 10.37.The results showed that this model could be applied for quantifying the adulteration concentration of PKO in VCO.The prediction adulteration concentration mapping of VCO with PKO was created from a calibration model that showed the color level according to the adulteration concentration in the range of 0-100%.NIR hyperspectral imaging could be clearly used to quantify the adulteration of VCO with a color level map that provides a quick,accurate,and non-destructive detection method.

Effect of Adhesive Type on the Quality of Coconut Shell Charcoal Briquettes Prepared by the Screw Extruder Machine

Indonesia is one of the largest coconut-producing countries in the world.The utilization of coconut shell waste into briquettes will increase the selling value and become a great export opportunity.However,the effect of adhesives on the quality of coconut shell charcoal briquettes made using screw extruder machine has not been widely studied.This study aims to determine the effect of adhesive type on the quality of coconut shell charcoal briquettes.The process of fabricating briquettes in this study included crushing,mixing,blending,pressing,and drying.In the mixing process,3 types of adhesives were used,namely tapioca flour(Briquette_1),cassava flour(Briquette_2),and modified cassava flour(Briquette_3)with a concentration of 5%of the weight of coconut shell charcoal powders.The quality of the resulting briquettes and commercial briquettes will be evaluated by moisture content,ash content,volatile matter,fixed carbon,calorific value,density,compressive,and drop test testing.The results of this research showed that the type of adhesive had a significant effect on the quality of the briquettes produced.Specimen Briquette_1 had better quality than commercial briquettes(Briquette_4)and other briquette specimens.The test results showed that Briquette_1 produced briquettes with better compressive strength and friability than the other specimens,at 6.95 N/mm^(2) and 4.44%,respectively.The moisture content,ash content,fixed carbon,and calorific value of Briquette_1 have met the requirements set by the Indonesian National Standard(SNI)number 01-6235-2000.Meanwhile,the volatile matter content and density of Briquette_1 are by the standards of Japan and the United States America(USA).

Simple and High-Yield Synthesis of a Thinner Layer of Graphenic Carbon from Coconut Shells

Biomass has become of recent interest as a raw material for‘green’graphenic carbon(GC)since it promotes an environmentally friendly approach.Here,we investigate a single pyrolysis route to synthesize GC from coconut shells which provides a simple method and can produce a high yield,thus being convenient for large-scale pro-duction.The pyrolysis involves a stepped holding process at 350℃ for 1 h and at 650℃ or 900℃ for 3 h.The GC sample resulted at the 900℃ pyrolysis has a thinner sheet,a less porous structure,a higher C/O ratio,and an enhanced electrical conductivity than those pyrolyzed at 650℃.The addition of Na3PO4 catalyst has no signifi-cant effects on the GC structures obtained by this route.The single pyrolysis route generates thinner GC sheets compared to the two-step heat treatment followed by the liquid phase exfoliation(LPE)procedure.Nevertheless,the latter method offers a formation of clean samples with a porous or holey feature which has potential for advanced energy-storage applications.

Improvement of Mechanical Qualities of Clay Material through Coconut Fiber Stabilization

The criticisms regularly formulated towards clay or soil, in general, are its weak mechanical qualities and low water quality. Therefore, it is necessary to find techniques to improve the properties of this material, which is widely used worldwide. Here, we propose stabilizing clay with coconut fiber as a solution to enhance its mechanical properties. To do this, we used an experimental method, first determining the geotechnical properties of the clay and then its mechanical properties. The geotechnical study using the Proctor Test revealed that the dry density of the clay is γb = 1.42 g/cm3, and its water content is W = 22.3%. By applying the rolling method, the Atterberg limits were determined: liquid limit Wl = 63.6, plastic limit Wp = 27.9, plasticity index Ip = 35.7, and consistency index Ic = 1.46. With 25 P = 35.7 1.3, according to the water classification, it falls into class A3ts. The mechanical part focused on compression and flexural strengths obtained using a PROETI hydraulic press. We obtained a flexural strength of 0.63 MPa for simple clay (BA);0.89 MPa for clay + 0.25% fiber (BAF1/4);1.68 MPa for clay + 0.5% fiber (BAF1/2);1.87 MPa for clay + 0.75% fiber (BAF3/4);and 3.91 MPa for clay + 1% fiber (BAF1). As for the compression strength, BA = 5.90 MPa, BAF1/4 = 6.395 MPa, BAF1/2 = 6.292 MPa, BAF3/4 = 6.065 MPa, and BAF1 = 5.423 MPa. The addition of fiber has thus improved the mechanical qualities of the simple clay. These stabilized bricks can be used for sustainable and bioclimatic construction, providing higher durability and good comfort.

Coconut Fiber Pyrolysis: Bio-Oil Characterization for Potential Application as an Alternative Energy Source and Production of Bio-Degradable Plastics

The current energy crisis could be alleviated by enhancing energy generation using the abundant biomass waste resources. Agricultural and forest wastes are the leading organic waste streams that can be transformed into useful alternative energy resources. Pyrolysis is one of the technologies for converting biomass into more valuable products, such as bio-oil, bio-char, and syngas. This work investigated the production of bio-oil through batch pyrolysis technology. A fixed bed pyrolyzer was designed and fabricated for bio-oil production. The major components of the system include a fixed bed reactor, a condenser, and a bio-oil collector. The reactor was heated using a cylindrical biomass external heater. The pyrolysis process was carried out in a reactor at a pressure of 1atm and a varying operating temperature of 150˚C, 250˚C, 350˚C to 450˚C for 120 minutes. The mass of 1kg of coconut fiber was used with particle sizes between 2.36 mm - 4.75 mm. The results show that the higher the temperature, the more volume of bio-oil produced, with the highest yield being 39.2%, at 450˚C with a heating rate of 10˚C/min. The Fourier transformation Infrared (FTIR) Spectroscopy analysis was used to analyze the bio-oil components. The obtained bio-oil has a pH of 2.4, a density of 1019.385 kg/m3, and a calorific value of 17.5 MJ/kg. The analysis also showed the presence of high-oxygenated compounds;carboxylic acids, phenols, alcohols, and branched oxygenated hydrocarbons as the main compounds present in the bio-oil. The results inferred that the liquid product could be bestowed as an alternative resource for polycarbonate material production.

Coconut oil research:Past,present,and future directions

Coconut oil contains a rich amount of medium-chain fatty acids,including lauric acid,decanoic acid,and octanoic acid,as well as the corresponding medium-chain triglycerides.It possesses functional attributes such as facile digestion and absorption,as well as antibacterial and antioxidant properties.The study utilized the Citespace and VOSviewer visual analysis software to examine the quantity of published papers,authors,publishing institutions,research hotspots and frontiers of 3442 effective literatures on the theme of"coconut oil"in the Web of Science(WoS)Core Collection database.The research on coconut oil can be condensed into four primary sections:(1)investigation and utilization of physiochemical characteristics of coconut oil,(2)analysis of nutritional composition and study of the effectiveness of coconut oil,(3)identification of adulteration in coconut oil,(4)evaluation of the impact of coconut oil as a dietary supplement on animal metabolism.Additionally,research focal points have evolved in three distinct phases.Prior to 2008,numerous studies were conducted to investigate the precise fatty acid makeup of coconut oil and its potential for lowering cholesterol levels.From 2009 to 2016,significant emphasis was placed on examining the impact of coconut oil on methane production in ruminants.Between 2018 to 2023,the main focus will be on investigating how nanoparticles can alter the properties of coconut oil.In the future,the anticipated research areas of interest are expected to focus on the rapid detection method of coconut oil,the efficacy of coconut oil and the advancement of coconut resources.The objective of this review is to provide researchers with relevant information about coconut oil,aiming to foster the continued growth of the coconut oil industry.

N-Doped rGO-Like Carbon Prepared from Coconut Shell:Structure and Specific Capacitance

An rGO−like carbon compound has been synthesized from biomass,i.e.,old coconut shell,by a carbonization process followed by heating at 400°C for 5 h.The nitrogen doping was achieved by adding the urea(CH4N2O)and stirring at 70°C for 14 h.The morphology and structure of the rGO-like carbon were investigated by electron microscopies and Raman spectroscopy.The presence of C-N functional groups was analyzed by Fourier transform infrared and synchrotron X-ray photoemission spectroscopy,while the particle and the specific capacitance were measured by particle sizer and cyclic voltammetry.The highest specific capacitance of 72.78 F/g is achieved by the sample with 20%urea,having the smallest particles size and the largest surface area.The corresponding sample has shown to be constituted by the appropriate amount of C–N pyrrolic and pyridinic defects.

Effects of Incorporating Coconut Cake or Palm Kernel Cake in Piglet Fattening

In C&#244te d’Ivoire, coconut and palm cultivation are very developed. Industrial utilization of these crops fruits is generated some under products that can be used in breeding. The aim of this study was to test the potentialities in the breeding of cattle-cake of coconut and cattle-cake of palm kernel when they are incorporated in diets of piglet fattening. 18 piglets teamed up into three homogenous groups (three males castrate and three females) were used. The control group was fed a diet made with 55% of maize + 10% of bran maize + 25% fish powder + 4% of ash + 3% of salt. The test 1 group called diet ESSAI 1 was fed a mixture of 70% of the control diet and 30% of cattle-cake of coconut. The test 2 group called diet ESSAI 2 was fed with a mixture of 70% of the control diet and 30% of cattle-cake of palm kernel. The analysis made showed that the two cattle-cake are nutritiously rich and their incorporation in diets at degree of 30% of the total diet induced growth performance similar to that obtained with the control diet. Animals of each group were in good health and diets EASSAI 1 and ESSAI 2 were cheaper than the control diet. Then, cattle-cake of coconut and cattle-cake of palm kernel can be recommended as part of the diet of piglet (about 30%) in order to enhance profit with the same growth performance.

Characterization of Unsaturated Polyester Filled with Waste Coconut Shells, Walnut Shells, and Carbon Fibers

This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells,walnut shells,and carbonfibers dispersed in a polyester matrix.MINITAB(L16)Taguchi experiments were used to determine the optimal combination of parameters.In particular,an erosion device con-sisting of a motor with a constantflow rate of 45 L/min,a pump with a diameter of 40 mm,a nozzle with a dia-meter of 5 mm,and a tank made of“perspex glass”55 cm long,30 cm tall,and 25 cm wide was used.The tests were conducted by varying the sample-to-nozzle distance,the pattern angle,and the sand particle size.The results have revealed that the presence of 7.5%by weight of waste coconut shell,for conditions corresponding to 90°angle,sand size 425μm,stand distance 30 cm,gives the best wear resistance(3.04×10^(-5) g/g).Thefiller content and sand particle size affect the erosive rate,with the angle playing a secondary role.The distance between the sample and the nozzle has a weaker effect on erosive wear.The hardness results show that the models(UP-5%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste coconut shell)give the best values for prayer compared to the samples(UP-5 wt.%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste walnut shell).

Evaluation of the Productivity of Intercropping Plantain Cultivar (PITA 3) Fertilized with Two Types of Manure, under Coconut Tree Based (Cocos nucifera L.), on the Tertiary Sands of Côte d’Ivoire

Pressure on land tenure is having a negative impact on the coconut sector, reducing farmers’ incomes. Intercropping cultivars plantain under coconut based has been considered as a solution to this problem. The aim of this work is to diversify the sources of income for coconut growers. The plantain variety PITA 3, popularised by the CNRA, was grown in coconut inter-rows (PB113+), with two types of manure (chemical, organic). Six (06) treatments D1, D2, D3, D4, D5 and D6 were studied. In the tenth month after planting, treatment D3, which included banana plants fertilised with 9 kg of manure/plant, got the best agromorphological performance: height (264.08 cm), neck circumference (57.68 cm) and 12 leaves. In terms of production parameters, D3 banana plants had a shorter production cycle (347 days) and the highest diet mass (9.3 kg). However, the plants that received no fertiliser (D6) showed stunted growth and were unable to produce brunch. The fertilization of plantain with 10 t/ha of laying hen droppings permitted good development and production of plantains on tertiary sands.

Influence of Plastic and Coconut Shell (Cocos nucifera L.) on the Physico-Mechanical Properties of the 8/6 Composite Rafter

In this paper, the authors aim to propose the use of waste plastics as a binder in a coconut shell reinforcement for the development of an 8/6 size composite rafter to replace the natural 8/6 size backbone in construction. Following a study into the choice of the best proportions, a total of 30 size 8/6 composite rafters with different proportions of 20%, 25%, 30%, 35%, 40% and 50% plastic content were developed. All the 8/6 composite rafters were subjected to mechanical (3-point bending strength and Monnin hardness) and physical (bulk density and water absorption) characterization analyses. The results show that flexural strength increases from 27.56 MPa to 33.30 MPa for proportions ranging from 20% to 35% plastic content. Above 35% plastic, the strength drops to 19.60 MPa for a 50% plastic content. Similarly, the Monnin hardness drops from 9 mm to 5 mm when the plastic content varies from 20 to 50%. As for the results of the physical characterisation, the values obtained for apparent density vary from 0.89 to 1 for proportions varying from 20% to 35% plastic content and drop to 0.94 for 50% plastic content. As for water absorption, values drop from 6.82% to 2.45% when the plastic content increases from 20% to 50%. These mechanical strengths stabilise at 35% plastic content. The development of an 8/6 chevron composite material based on plastic and coconut shell could therefore be a way of recovering waste and solving the problem of deforestation.

Research on Coconut Germplasm Resource in Hainan Province

The researches on coconut germplasm resource of Hainan Province and its importance were reviewed in this study.The classification and characters of coconut germplasm resource in Hainan Province,as well as its development and utilization of were summarized.In addition,some of the problems in researches on coconut germplasm resource and the potential research directions were discussed.

Optimization of Parameters for Fermentative Production of Virgin Coconut Oil by Lactobacillus fermentum NDRI 141

Commercially, many methods are adopted for the production of the Virgin Coconut Oil （VCO）. Nowadays, natural fermentation is widely employed to produce VCO in wet processing. But the problem in natural fermentation process has much contamination, due to surplus micro organisms present in natural environment, which leads to the poor quality of VCO. To overcome this, usage of probiotic organism like Lactobacillus fermentum is more beneficial for the fermentative production of VCO. Fermentation studies were conducted scientifically in computer controlled bioreactor to determine the effect of pH, temperature, inoculum concentration, oxygen requirement and incubation time on the yield of VCO. Yield efficiency of VCO in each parameter was determined. The pH of 5± 0.1, temperature at 45 ± 0.1 ~C, inoculum concentration of 2%, fermentation end time of 48 hrs and microaerophilic conditions are the most suitable parameters for the superior production of VCO.

Coconut Press Cake Alkaline Extract—Protein Solubility and Emulsification Properties

The solubility and the emulsification properties of a crude freeze dried alkaline protein extract (APE), 30% protein, obtained from coconut milk press cake by one step extraction at pH 11, were characterized at pH 2 to 11, and the cream and subnatant fractions of the emulsion studied by SDS-PAGE electrophoresis. The protein solubility followed U profile, showing a minimum at pH 3 to 4, close to but not identical to reported iso-electric points of 4 - 5 for many coconut protein fractions. The extract showed good capacity to form oil-in-water emulsion outside the low solubility pH range. The bands that appeared to play a role in the emulsification were found at 32 and 42 kDa in SDS-PAGE electrophoresis, but the most predominant absorbed band was at 23 kDa.

Coconut(Cocos nucifera L.:Arecaceae):In health promotion and disease prevention

Coconut,Cocos nucifera L.,is a tree that is cultivated for its multiple utilities,mainly for its nutritional and medicinal values.The various products of coconut include tender coconut water,copra,coconut oil,raw kernel,coconut cake,coconut toddy,coconut shell and wood based products,coconut leaves,coir pith etc.Its all parts are used in someway or another in the daily life of the people in the traditional coconut growing areas.It is the unique source of various natural products for the development of medicines against various diseases and also for the development of industrial products.The parts of its fruit like coconut kernel and tender coconut water have numerous medicinal properties such as antibacterial,antifungal,antiviral, antiparasitic,antidermatophytic,antioxidant,hypoglycemic,hepatoprotective,immunostimulant. Coconut water and coconut kernel contain microminerals and nutrients,which are essential to human health,and hence coconut is used as food by the peoples in the globe,mainly in the tropical countries.The coconut palm is,therefore,eulogised as ’Kalpavriksha’(the all giving tree) in Indian classics,and thus the current review describes the facts and phenomena related to its use in health and disease prevention.

Di(2-ethylhexyl) phosphoric acid-coconut oil supported liquid membrane for the separation of copper ions from copper plating wastewater

Permeation of Cu（Ⅱ） from its aqueous solution through a supported liquid membrane （SLM） containing di（2-ethylhexyl）phosphoric acid （D2EHPA） carrier dissolved in coconut oil has been studied. The effects of Cu（Ⅱ）, pH （in feed）, H2SO4 （stripping） and D2EHPA （in membrane） concentrations have been investigated. The stability of the D2EHPA-coconut oil has also been evaluated. High Cu（Ⅱ） concentration in the feed leads to an increase in flux from 4.1 × 10^-9 to 8.9 × 10^-9 mol/（m^2·s） within the Cu（Ⅱ） concentration range 7.8×10^-4-78.6×10^-4 mol/L at pH of 4.0 in the feed and 12.4 × 10^-4 mol/L D2EHPA in the membrane phase. Increase in H2SO4 concentration in strip solution leads to an increase in copper ions flux up to 0.25 mol/L H2SO4, providing a maximum flux of 7.4 × 10^-9 mol/（m^2·s）. The optimum conditions for Cu（Ⅱ） transport are, pH of feed 4.0, 0.25 mol/L H2SO4 in strip phase and 12.4 × 10^-4 mol/L D2EHPA （membrane） in 0.5 μm pore size polytetrafluoroethylene （PTFE） membrane. It has been observed that Cu（Ⅱ） flux across the membrane tends to increase with the concentration of copper ions. Application of the method developed to copper plating bath rinse solutions has been found to be successful in the recovery of Cu（Ⅱ）.

Productivity and nutrient cycling in an agroforestry ecosystem for interplant of pineapple and coconut

In this paper, the biomass productivity and nutrient cycling in an agroforestry system of coconut (Cocus nucifera) interplanted with pineapple (Ananas comosus) had been studied. The result showed that the biomass productivity of this ecosystem was 47 460 kg...hm2...a?1, which was 4.3 times as much as that of pure coconut plantation. In the biological cycling of N, P. K elements, the total annual retention was 559.470 kg...hm?2, the annual return was 410.745 kg...hm?2, the annual uptake was 970.475 kg...hm?2, respectively. The average circulation rate in three nutrient elements (N, P, K) was 42.32%, which was 27.53% more than that in pure coconut stands. Coconut interplanted with pineapple was proved to be one of optimum cultural patterns, which had the higher biomass productivity, and better usage efficiency of environment resources in tropical areas.

Therapeutic effects of tender coconut water on oxidative stress in fructose fed insulin resistant hypertensive rats

Objective:To investigate whether tender coconut water(TCW) mitigates oxidative stress in fructose fed hypertensive rats.Methods:Male Sprague Dawley rats were fed with fructose rich diet and treated with TCW(4 mL/100 g of body weight) for 3 subsequent weeks.Systolic blootl pressure was measured every three days using the indirect tail cuff method.At the end of the experimental period,plasma glucose and insulin,serum triglycerides and free fatly acids, lipid peroxidation markers(MDA,hydroperoxides and conjugated dienes) and the activities of antioxidant enzymes were analyzed in all the groups.Results:Treatment with TCW significandy lowered the systolic blood pressure and reduced serum triglycerides and free fatty acids.Plasma glucose and insulin levels and lipid peroxidation markers such as MDA,hydroperoxides and conjugated dienes were significantly reduced in fructose fed rats treated with TCW.Activities of antioxidant enzymes are up regulated significantly in TCW treated rats.Hislopathological analysis of liver showed that TCW treatment reduced the lipid accumulation and inflammatory infiltration without any significant hepatocellular damage.Conclusions:The overall results suggest that, TCW treatment could prevent and reverse high blood pressure induced by high fructose diet probably by inhibition of lipid peroxidation,upregulation of antioxidant status and improved insulin sensitivity.

Preparation and SO2 Adsorption Behavior of Coconut Shell-Based Activated Carbon via Microwave-Assisted Oxidant Activation

A series of oxidants supported on coconut shell-based activated carbon(CAC) through microwave irradiation were prepared and characterized using scanning electron microscopy(SEM), N_2 adsorption/desorption analysis, and X-ray photoelectron spectroscopy(XPS). The SO_2 adsorption capacities and rates were evaluated by adsorption tests performed in a fixed bed reactor with a simulated flue gas, and the adsorption isotherm models were validated against the experimental results. The findings revealed that the SO_2 adsorption capacity decreased in the following order: MW-K_2Cr_2O_7-CAC > MWKMnO_4-CAC > MW-H_2O_2-CAC > MW-CAC. The SO_2 adsorption capacities and adsorption rates of the samples increased with an increasing oxidizability of the oxidants owing to the increment of mean pore size and oxygen-containing functional groups. In addition, a high initial SO_2 concentration and a low bed temperature could positively affect the SO2 adsorption. Finally, the Langmuir model validated that SO_2 was mainly adsorbed through chemical adsorption on the sample surfaces.

The effect of surfactant on the physical properties of coconut oil nanoemulsions

The aim of this study was to develop the water compatible form of coconut oil through nanoemulsification. The effect of different types and amounts of surfactants on the physical characteristics of nanoemulsions containing coconut oil was investigated. Coconut oil nanoemulsions containing varied amounts of surfactants including polyethylene glycol octyl phenyl ether(PGO), polyoxyethylene sorbitan monostearate(POS), polyethylene glycol hydrogenated castor oil(PHC), sodium lauryl sulfate(SLS) and poloxamer 407(PLX) were formulated and comparatively evaluated for their physical properties. The results showed that the coconut oil nanoemulsions using PGO, POS and PHC as surfactants exhibited low percent creaming index indicating excellent stability, while those containing SLS and PLX demonstrated the higher percent creaming index suggesting lesser physical stability. The droplet sizes of nanoemulsions consisting of 5%(w/w) PGO, POS and PHC were 22.843, 4.458 and 0.162 μm, respectively. Thus, coconut oil nanoemulsions with the smallest size could be obtained when PHC was applied. Furthermore, the droplet size of nanoemulsions decreased from 33 μm to less than 200 nm with an increase in the amount of PHC from 1% to 10%(w/w). Additionally, the properties of coconut oil based nanoemulsions containing PHC were not changed through temperature cycling test. From these results, it was suggested that the fabrication of stable coconut oil nanoemulsions with small particle size could be easily achieved by using 5%(w/w) PHC as a surfactant. The knowledge gained from the study might provide the basic guideline for the fabrication of stable nanoemulsions for food, cosmetic and pharmaceutical fields in the future.