Plasma-catalysis is considered as one of the most promising technologies for antibiotic degradation in water.In the plasma-catalytic system,one of the factors affecting the degradation effect is the performance of the...Plasma-catalysis is considered as one of the most promising technologies for antibiotic degradation in water.In the plasma-catalytic system,one of the factors affecting the degradation effect is the performance of the photocatalyst,which is usually restricted by the rapid recombination of electrons and holes as well as narrow light absorption range.In this research,a photocatalyst g-C_(3)N_(4)/TiO_(2) was prepared and coupled with gas-liquid discharge(GLD)to degrade tetracycline(TC).The performance was examined,and the degradation pathways and mechanisms were studied.Results show that a 90%degradation rate is achieved in the GLD with g-C_(3)N_(4)/TiO_(2) over a 10 min treatment.Increasing the pulse voltage is conducive to increasing the degradation rate,whereas the addition of excessive g-C_(3)N_(4)/TiO_(2) tends to precipitate agglomerates,resulting in a poor degradation efficiency.The redox properties of the g-C_(3)N_(4)/TiO_(2) surface promote the generation of oxidizing active species(H2O2,O3)in solution.Radical quenching experiments showed that·OH,hole(h^(+)),play important roles in the TC degradation by the discharge with g-C_(3)N_(4)/TiO_(2).Two potential degradation pathways were proposed based on the intermediates.The toxicity of tetracycline was reduced by treatment in the system.Furthermore,the g-C_(3)N_(4)/TiO_(2) composites exhibited excellent recoverability and stability.展开更多
Highly efficient and green ammonia production is an important demand for modern agriculture.In this study,a two-step ammonia production method is developed using a gliding arc discharge in combination with Cu/Cu_(2)O ...Highly efficient and green ammonia production is an important demand for modern agriculture.In this study,a two-step ammonia production method is developed using a gliding arc discharge in combination with Cu/Cu_(2)O electrocatalysis.In this method,NO_(x)is provided by the gliding arc discharge and then electrolyzed by Cu/Cu_(2)O after alkaline absorption.The electrical characteristics,the optical characteristics and the NO_(x)production are investigated in discharges at different input voltage and the gas flow.The dependence of ammonia production through Cu/Cu_(2)O electrocatalysis on pH value and reduction potential are determined by colorimetric method.In our study,two discharge modes are observed.At high input voltage and low gas flow,the discharge is operated with a stable plasma channel which is called the steady arc gliding discharge mode(A-G mode).As lowering input voltage and raising gas flow,the plasma channel is destroyed and high frequency breakdown occurs instead,which is known as the breakdown gliding discharge mode(B-G mode).The optimal NO_(x)production of 7.34 mmol h^(-1)is obtained in the transition stage of the two discharge modes.The ammonia yield reaches0.402 mmol h^(-1)cm^(-2)at pH value of 12.7 and reduction potential of-1.0 V versus reversible hydrogen electrode(RHE).展开更多
Simulations are conducted on capacitively coupled Ar/O_(2)mixed gas discharges employing a one-dimensional fluid coupled with an electron Monte Carlo(MC)model.The research explores the impact of different O_(2)ratio a...Simulations are conducted on capacitively coupled Ar/O_(2)mixed gas discharges employing a one-dimensional fluid coupled with an electron Monte Carlo(MC)model.The research explores the impact of different O_(2)ratio and pressures on the discharge characteristics of Ar/O_(2)plasma.At a fixed Ar/O_(2)gas ratio,with the increasing pressure,higher ion densities,as well as a slight increase in electron density in the bulk region can be observed.The discharge remains dominated by the drift-ambipolar(DA)mode,and the flux of O(3P)at the electrode increases with the increasing pressure due to higher background gas density,while the fluxes of O(1D)and Ardecrease due to the pronounced loss rate.With the increasing proportion of O_(2),a change in the dominant discharge mode from a mode to DA mode can be detected,and the O_(2)-associated charged particle densities are significantly increased.However,Ar+density shows a trend of increasing and then decreasing,while for neutral fluxes at the electrode,Arflux decreases,and O(3P)flux increases with the reduced Ar gas proportion,while trends in O(1D)flux show slight differences.The evolution of the densities of the charged particle and the neutral fluxes under different discharge parameters are discussed in detail using the ionization characteristics as well as the transport properties.Hopefully,more comprehensive understanding of Ar/O_(2)discharge characteristics in this work will provide a valuable reference for the industry.展开更多
Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene wer...Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene were also found in the products. Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst. Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.展开更多
Considering the feature of distributions of parameters within the micro-hollow cathode discharge, we use a simple method to separate the sheath region characterized by drastic changes of plasma parameters and the bulk...Considering the feature of distributions of parameters within the micro-hollow cathode discharge, we use a simple method to separate the sheath region characterized by drastic changes of plasma parameters and the bulk plasma region characterized by smooth changes of plasma parameters. A zero-dimensional chemical kinetic model is used to analyze the dissociation mechanism of CO2 in the bulk plasma region of a micro-hollow cathode discharge and is validated by comparisons with previous modeling and experimental results. The analysis of the chemical kinetic processes has shown that the electron impact dissociation and heavy species impact dissociation are dominant in different stages of the rnicro-hollow cathode discharge process for a given applied voltage. The analysis of energy consumption distributions under different applied voltages reveals that the main reason of the conversion improvement with the increase of the applied voltage is that more input energy is distributed to the heavy species impact dissociation.展开更多
基金supported by National Natural Science Foundation of China(Nos.52277151 and 51907088)Innovative Talents Team Project of‘Six Talent Peaks’of Jiangsu Province(No.TD-JNHB-006).
文摘Plasma-catalysis is considered as one of the most promising technologies for antibiotic degradation in water.In the plasma-catalytic system,one of the factors affecting the degradation effect is the performance of the photocatalyst,which is usually restricted by the rapid recombination of electrons and holes as well as narrow light absorption range.In this research,a photocatalyst g-C_(3)N_(4)/TiO_(2) was prepared and coupled with gas-liquid discharge(GLD)to degrade tetracycline(TC).The performance was examined,and the degradation pathways and mechanisms were studied.Results show that a 90%degradation rate is achieved in the GLD with g-C_(3)N_(4)/TiO_(2) over a 10 min treatment.Increasing the pulse voltage is conducive to increasing the degradation rate,whereas the addition of excessive g-C_(3)N_(4)/TiO_(2) tends to precipitate agglomerates,resulting in a poor degradation efficiency.The redox properties of the g-C_(3)N_(4)/TiO_(2) surface promote the generation of oxidizing active species(H2O2,O3)in solution.Radical quenching experiments showed that·OH,hole(h^(+)),play important roles in the TC degradation by the discharge with g-C_(3)N_(4)/TiO_(2).Two potential degradation pathways were proposed based on the intermediates.The toxicity of tetracycline was reduced by treatment in the system.Furthermore,the g-C_(3)N_(4)/TiO_(2) composites exhibited excellent recoverability and stability.
文摘Highly efficient and green ammonia production is an important demand for modern agriculture.In this study,a two-step ammonia production method is developed using a gliding arc discharge in combination with Cu/Cu_(2)O electrocatalysis.In this method,NO_(x)is provided by the gliding arc discharge and then electrolyzed by Cu/Cu_(2)O after alkaline absorption.The electrical characteristics,the optical characteristics and the NO_(x)production are investigated in discharges at different input voltage and the gas flow.The dependence of ammonia production through Cu/Cu_(2)O electrocatalysis on pH value and reduction potential are determined by colorimetric method.In our study,two discharge modes are observed.At high input voltage and low gas flow,the discharge is operated with a stable plasma channel which is called the steady arc gliding discharge mode(A-G mode).As lowering input voltage and raising gas flow,the plasma channel is destroyed and high frequency breakdown occurs instead,which is known as the breakdown gliding discharge mode(B-G mode).The optimal NO_(x)production of 7.34 mmol h^(-1)is obtained in the transition stage of the two discharge modes.The ammonia yield reaches0.402 mmol h^(-1)cm^(-2)at pH value of 12.7 and reduction potential of-1.0 V versus reversible hydrogen electrode(RHE).
基金the National Natural Science Foun-dation of China(Grant Nos.12020101005,11975067,and 12347131)the Fundamental Research Funds for the Cen-tral Universities(Grant No.DUT24BS069).
文摘Simulations are conducted on capacitively coupled Ar/O_(2)mixed gas discharges employing a one-dimensional fluid coupled with an electron Monte Carlo(MC)model.The research explores the impact of different O_(2)ratio and pressures on the discharge characteristics of Ar/O_(2)plasma.At a fixed Ar/O_(2)gas ratio,with the increasing pressure,higher ion densities,as well as a slight increase in electron density in the bulk region can be observed.The discharge remains dominated by the drift-ambipolar(DA)mode,and the flux of O(3P)at the electrode increases with the increasing pressure due to higher background gas density,while the fluxes of O(1D)and Ardecrease due to the pronounced loss rate.With the increasing proportion of O_(2),a change in the dominant discharge mode from a mode to DA mode can be detected,and the O_(2)-associated charged particle densities are significantly increased.However,Ar+density shows a trend of increasing and then decreasing,while for neutral fluxes at the electrode,Arflux decreases,and O(3P)flux increases with the reduced Ar gas proportion,while trends in O(1D)flux show slight differences.The evolution of the densities of the charged particle and the neutral fluxes under different discharge parameters are discussed in detail using the ionization characteristics as well as the transport properties.Hopefully,more comprehensive understanding of Ar/O_(2)discharge characteristics in this work will provide a valuable reference for the industry.
文摘Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene were also found in the products. Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst. Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11575019 and 11275021
文摘Considering the feature of distributions of parameters within the micro-hollow cathode discharge, we use a simple method to separate the sheath region characterized by drastic changes of plasma parameters and the bulk plasma region characterized by smooth changes of plasma parameters. A zero-dimensional chemical kinetic model is used to analyze the dissociation mechanism of CO2 in the bulk plasma region of a micro-hollow cathode discharge and is validated by comparisons with previous modeling and experimental results. The analysis of the chemical kinetic processes has shown that the electron impact dissociation and heavy species impact dissociation are dominant in different stages of the rnicro-hollow cathode discharge process for a given applied voltage. The analysis of energy consumption distributions under different applied voltages reveals that the main reason of the conversion improvement with the increase of the applied voltage is that more input energy is distributed to the heavy species impact dissociation.
