Triple the steady-state reaction rate by decorating the In_(2)O_(3)surface with SiO_(x)for CO_(2)hydrogenation

Indium oxide(In_(2)O_(3)),as a promising candidate for CO_(2)hydrogenation to C_(1) products,often suffers from sintering and activity decline,closely related to the undesirable structural evolution under reaction conditions.Based on the comprehension of the dynamic evolution,this study presents an efficient strategy to alleviate the agglomeration of In_(2)O_(3)nanoparticles by the surface decoration with highly dispersed silica species(SiO_(x)).Various structural characterizations combined with density functional theory calculations demonstrated that the sintering resulted from the over-reduction,while the enhanced stability originated from the anchoring effect of highly stable In-OSi bonds,which hinders the substantial formation of metallic In(In^(0))and the subsequent agglomeration.0.6Si/In_(2)O_(3)exhibited CO_(2)conversion rate of10.0 mmol g^(-1)h^(-1)at steady state vs.3.5 mmol g^(-1)h^(-1)on In_(2)O_(3)in CO_(2)hydrogenation.Enhanced steady-state activity was also achieved on Pd-modified catalysts.Compared to the traditional Pd/In_(2)O_(3)catalyst,the methanol production rate of Pd catalyst supported on 0.6Si/In_(2)O_(3)was enhanced by 23%,showing the potential of In_(2)O_(3)modified by SiO_(x)in serving as a platform material.This work provides a promising method to design new In_(2)O_(3)-based catalysts with improved activity and stability in CO_(2)hydrogenation.

CO_(2) hydrogenation to methanol over the copper promoted In_(2)O_(3) catalyst

The metal promoted In_(2)O_(3) catalysts for CO_(2) hydrogenation to methanol have attracted wide attention because of their high activity with high methanol selectivity.However,there was still no experimental confirmation if copper could be a good promoter for In_(2)O_(3).Herein,the Cu promoted In_(2)O_(3) catalyst was prepared using a deposition-precipitation method.Such prepared Cu/In_(2)O_(3) catalyst shows significantly higher CO_(2) conversion and space time yield(STY)of methanol,compared to the un-promoted In_(2)O_(3) catalyst.The loading of Cu facilitates the activation of both H_(2) and CO_(2) with the interface between the Cu cluster and defective In_(2)O_(3) as the active site.The Cu/In_(2)O_(3) catalyst takes the CO hydrogenation pathway for methanol synthesis from CO_(2) hydrogenation.It exhibits a unique size effect on the CO adsorption.At temperatures below 250℃,CO adsorption on Cu/In_(2)O_(3) is stronger than that on In_(2)O_(3),causing higher methanol selectivity.With increasing temperatu res,the Cu catalyst aggregates,which leads to the formation of weak CO adsorption site and causes a decrease in the methanol selectivity.Compared with other metal promoted In_(2)O_(3) catalysts,it can be concluded that the catalyst with stronger CO adsorption possesses higher methanol selectivity.

Comparison of Perovskite Systems Based on AFeO_(3)(A=Ce,La,Y)in CO_(2) Hydrogenation to CO

CO_(2) is the most cost-eff ective and abundant carbon resource,while the reverse water-gas reaction(rWGS)is one of the most eff ective methods of CO_(2) utilization.This work presents a comparative study of rWGS activity for perovskite systems based on AFeO_(3)(where A=Ce,La,Y).These systems were synthesized by solution combustion synthesis(SCS)with diff erent ratios of fuel(glycine)and oxidizer(φ),diff erent amounts of NH 4 NO_(3),and the addition of alumina or silica as supports.Various techniques,including X-ray diff raction analysis,thermogravimetric analysis,Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy,energy-dispersive X-ray spectroscopy,N 2-physisorption,H_(2) temper-ature-programmed reduction,temperature-programmed desorption of H_(2) and CO_(2),Raman spectroscopy,and in situ FTIR,were used to relate the physicochemical properties with the catalytic performance of the obtained composites.Each specifi c perovskite-containing system(either bulk or supported)has its own optimalφand NH_(4) NO_(3) amount to achieve the highest yield and dispersion of the perovskite phase.Among all synthesized systems,bulk SCS-derived La-Fe-O systems showed the highest resistance to reducing environments and the easiest hydrogen desorption,outperforming La-Fe-O produced by solgel combustion(SGC).CO_(2) conversion into CO at 600°C for bulk ferrite systems,depending on the A-cation type and preparation method,follows the order La(SGC)<Y<Ce<La(SCS).The diff erences in properties between La-Fe-O obtained by the SCS and SGC methods can be attributed to diff erent ratios of oxygen and lanthanum vacancy contributions,hydroxyl coverage,morphology,and free iron oxide presence.In situ FTIR data revealed that CO_(2) hydrogenation occurs through formates generated under reaction conditions on the bulk system based on La-Fe-O,obtained by the SCS method.γ-Al_(2)O_(3) improves the dispersion of CeFeO_(3) and LaFeO_(3) phases,the specifi c surface area,and the quantity of adsorbed H_(2) and CO_(2).This led to a signifi cant increase in CO_(2) conversion for supported CeFeO_(3) but not for the La-based system compared to bulk and SiO_(2)-supported perovskite catalysts.However,adding alumina increased the activity per mass for both Ce-and La-based perovskite systems,reducing the amount of rare-earth components in the catalyst and thereby lowering the cost without substantially compromising stability.

Cu-based materials for electrocatalytic CO_(2) to alcohols:Reaction mechanism,catalyst categories,and regulation strategies

Electrocatalytic CO_(2) reduction reaction(CO_(2)RR)technology,which enables carbon capture storage and resource utilization by reducing CO_(2) to valuable chemicals or fuels,has become a global research hotspot in recent decades.Among the many products of CO_(2)RR(carbon monoxide,acids,aldehydes and alcohols,olefins,etc.),alcohols(methanol,ethanol,propanol,etc.)have a higher market value and energy density,but it is also more difficult to produce.Copper is known to be effective in catalyzing CO_(2) to high valueadded alcohols,but with poor selectivity.The progress of Cu-based catalysts for the selective generation of alcohols,including copper oxides,bimetals,single atoms and composites is reviewed.Meanwhile,to improve Cu-based catalyst activity and modulate product selectivity,the modulation strategies are straighten out,including morphological regulation,crystalline surface,oxidation state,as well as elemental doping and defect engineering.Based on the research progress of electrocatalytic CO_(2) reduction for alcohol production on Cu-based materials,the reaction pathways and the key intermediates of the electrocatalytic CO_(2)RR to methanol,ethanol and propanol are summarized.Finally,the problems of traditional electrocatalytic CO_(2)RR are introduced,and the future applications of machine learning and theoretical calculations are prospected.An in-depth discussion and a comprehensive review of the reaction mechanism,catalyst types and regulation strategies were carried out with a view to promoting the development of electrocatalytic CO_(2)RR to alcohols.

Effects of acid-rock reaction on physical properties during CO_(2)-rich industrial waste gas(CO_(2)-rich IWG)injection in shale reservoirs

"Carbon peaking and carbon neutrality"is an essential national strategy,and the geological storage and utilization of CO_(2)is a hot issue today.However,due to the scarcity of pure CO_(2)gas sources in China and the high cost of CO_(2)capture,CO_(2)-rich industrial waste gas(CO_(2)-rich IWG)is gradually emerging into the public's gaze.CO_(2)has good adsorption properties on shale surfaces,but acidic gases can react with shale,so the mechanism of the CO_(2)-rich IWG-water-shale reaction and the change in reservoir properties will determine the stability of geological storage.Therefore,based on the mineral composition of the Longmaxi Formation shale,this study constructs a thermodynamic equilibrium model of water-rock reactions and simulates the regularity of reactions between CO_(2)-rich IWG and shale minerals.The results indicate that CO_(2)consumed 12%after reaction,and impurity gases in the CO_(2)-rich IWG can be dissolved entirely,thus demonstrating the feasibility of treating IWG through water-rock reactions.Since IWG inhibits the dissolution of CO_(2),the optimal composition of CO_(2)-rich IWG is 95%CO_(2)and 5%IWG when CO_(2)geological storage is the main goal.In contrast,when the main goal is the geological storage of total CO_(2)-rich IWG or impurity gas,the optimal CO_(2)-rich IWG composition is 50%CO_(2)and 50%IWG.In the CO_(2)-rich IWG-water-shale reaction,temperature has less influence on the water-rock reaction,while pressure is the most important parameter.SO2 has the greatest impact on water-rock reaction in gas.For minerals,clay minerals such as illite and montmorillonite had a significant effect on water-rock reaction.The overall reaction is dominated by precipitation and the volume of the rock skeleton has increased by 0.74 cm3,resulting in a decrease in shale porosity,which enhances the stability of CO_(2)geological storage to some extent.During the reaction between CO_(2)-rich IWG-water-shale at simulated temperatures and pressures,precipitation is the main reaction,and shale porosity decreases.However,as the reservoir water content increases,the reaction will first dissolve and then precipitate before dissolving again.When the water content is less than 0.0005 kg or greater than 0.4 kg,it will lead to an increase in reservoir porosity,which ultimately reduces the long-term geological storage stability of CO_(2)-rich IWG.

CO_(2)-assisted oxidation dehydrogenation of light alkanes over metal-based heterogeneous catalysts

Light olefins are important platform feedstocks in the petrochemical industry,and the ongoing global economic development has driven sustained growth in demand for these compounds.The dehydrogenation of alkanes,derived from shale gas,serves as an alternative olefins production route.Concurrently,the target of realizing carbon neutrality promotes the comprehensive utilization of greenhouse gas.The integrated process of light alkanes dehydrogenation and carbon dioxide reduction(CO_(2)-ODH)can produce light olefins and realize resource utilization of CO_(2),which has gained wide popularity.With the introduction of CO_(2),coke deposition and metal reduction encountered in alkanes dehydrogenation reactions can be effectively suppressed.CO_(2)-assisted alkanes dehydrogenation can also reduce the risk of potential explosion hazard associated with O_(2)-oxidative dehydrogenation reactions.Recent investigations into various metal-based catalysts including mono-and bi-metallic alloys and oxides have displayed promising performances due to their unique properties.This paper provides the comprehensive review and critical analysis of advancements in the CO_(2)-assisted oxidative dehydrogenation of light alkanes(C2-C4)on metal-based catalysts developed in recent years.Moreover,it offers a comparative summary of the structural properties,catalytic activities,and reaction mechanisms over various active sites,providing valuable insights for the future design of dehydrogenation catalysts.

Preparation of palladium-based catalyst by plasma-assisted atomic layer deposition and its applications in CO_(2) hydrogenation reduction

Supported Pd catalyst is an important noble metal material in recent years due to its high catalytic performance in CO_(2)hydrogenation.A fluidized-bed plasma assisted atomic layer deposition(FP-ALD) process is reported to fabricate Pd nanoparticle catalyst over γ-Al_(2)O_(3)or Fe_(2)O_(3)/γ-Al_(2)O_(3)support,using palladium hexafluoroacetylacetonate as the Pd precursor and H_(2)plasma as counter-reactant.Scanning transmission electron microscopy exhibits that highdensity Pd nanoparticles are uniformly dispersed over Fe_(2)O_(3)/γ-Al_(2)O_(3)support with an average diameter of 4.4 nm.The deposited Pd-Fe_(2)O_(3)/γ-Al_(2)O_(3)shows excellent catalytic performance for CO_(2)hydrogenation in a dielectric barrier discharge reactor.Under a typical condition of H_(2)to CO_(2)ratio of 4 in the feed gas,the discharge power of 19.6 W,and gas hourly space velocity of10000 h^(-1),the conversion of CO_(2)is as high as 16.3% with CH_(3)OH and CH4selectivities of 26.5%and 3.9%,respectively.

Effects of surface chlorine atoms on charge distribution and reaction barriers for photocatalytic CO_(2)reduction

Photocatalytic CO_(2)reduction to produce high value-added carbon-based fuel has been proposed as a promising approach to mitigate global warming issues.However,the conversion efficiency and product selectivity are still low due to the sluggish dynamics of transfer processes involved in proton-assisted multi-electron reactions.Lowering the formation energy barriers of intermediate products is an effective method to enhance the selectivity and productivity of final products.In this study,we aim to regulate the surface electronic structure of Bi_(2)WO_(6)by doping surface chlorine atoms to achieve effective photocatalytic CO_(2)reduction.Surface Cl atoms can enhance the absorption ability of light,affect its energy band structure and promote charge separation.Combined with DFT calculations,it is revealed that surface Cl atoms can not only change the surface charge distribution which affects the competitive adsorption of H_(2)O and CO_(2),but also lower the formation energy barrier of intermediate products to generate more intermediate*COOH,thus facilitating CO production.Overall,this study demonstrates a promising surface halogenation strategy to enhance the photocatalytic CO_(2)reduction activity of a layered structure Bi-based catalyst.

Increased Oxygen Vacancies in CuO-ZnO Snowflake-like Composites Drive the Hydrogenation of CO_(2) to Methanol

Cu/ZnO is widely used in the hydrogenation of carbon dioxide (CO_(2)) to methanol (CH_(3)OH) to improve the lowconversion rate and selectivity generally observed. In this work, a series of In, Zr, Co, and Ni-doped CuO-ZnO catalysts wassynthesized via a hydrothermal method. By introducing a second metal element, the activity and dispersion of the activesites can be adjusted and the synergy between the metal and the carrier can be enhanced, forming an abundance of oxygenvacancies. Oxygen vacancies not only adsorb CO_(2) but also activate the intermediates in methanol synthesis, playing a keyrole in the entire reaction. Co3O4-CuO-ZnO had the best catalytic performance (a CO_(2) conversion rate of 9.17%;a CH_(3)OHselectivity of 92.77%). This study describes a typical strategy for multi-component doping to construct a catalyst with anabundance of oxygen vacancies, allowing more effective catalysis to synthesize CH_(3)OH from CO_(2).

CuZn/CeO_(2)催化剂在CO_(2)加氢制甲醇中的应用研究

CO_(2)加氢制甲醇反应过程中产生的大量副产物水会加速催化剂中CuZn物种的聚集和烧结,导致催化剂严重失活。而CeO_(2)亲水性较弱,具有较高的水热稳定性,可以增强CuZn物种的分散。因此,通过水热合成法制备了一系列CeO_(2)载体晶面可调控的CuZn基催化剂,并在其中引入了适当浓度的氧空位。采用TEM、XRD和H_(2)-TPR等表征手段研究了合成的CeO_(2)载体及CuZn/CeO_(2)-y催化剂(y为rod、cube或otca)的形貌、结构和还原性能等物理化学性质,并考察了CuZn/CeO_(2)-y催化剂在CO_(2)加氢制甲醇反应中的催化性能。结果表明,暴露(110)晶面的纳米棒结构的CeO_(2)载体(CeO_(2)-rod)更有利于CuZn基物种的分散,并且CeO_(2)-rod与Cu物种形成了Cu—O—Ce界面,增强了催化剂同时吸附和活化CO_(2)和H_(2)的性能。因此,CuZn/CeO_(2)-rod表现出较高的CO_(2)转化率和甲醇选择性,在260℃、3MPa的条件下,甲醇时空收率为433.4g/(kg·h),甲醇选择性高达68.5%。同时,利用原位漫反射傅立叶变换红外光谱对CO_(2)加氢制甲醇的反应路径和重要中间物种的演变进行了详细研究,发现在CuZn/CeO_(2)催化剂的作用下,反应主要遵循甲酸盐路径,载体的晶面效应没有改变反应路径,但是提高了重要中间物种达到平衡的速率。

基于三维点云计算的CO_(2)-水-岩反应程度量化表征方法

CO_(2)地质封存是减少大气中CO_(2)排放,降低温室效应的重要途径,CO_(2)注入含水地层中时,CO_(2)-水-岩反应可能引起岩石矿物的侵蚀,对CO_(2)地质封存安全性产生显著影响。在室内实验中,通过表征岩石表面的形貌特征可以有效地评估CO_(2)-水-岩反应程度,为CO_(2)地质封存的安全性评估提供科学依据。通过三维点云计算可以精确量化地表征CO_(2)-水-岩反应程度,这种方法首先运用三维激光扫描技术,构建岩石表面的三维模型,确定CO_(2)-水处理前岩石表面三维模型的基准面,并基于处理前的均方根粗糙度确定处理后岩石表面三维模型的基准面。基于三维模型点云信息,提出了两种不同的体积计算新方法,并通过对规则模型体积的计算比较了两种计算方法的准确性与适用性,可根据实际情况选择两种计算方法量化表征CO_(2)-水处理前后岩石表面的侵蚀体积。最后,以陕西省咸阳市某煤矿煤样为例,开展了CO_(2)-水-岩反应模拟试验,验证了计算的可行性。试验结果表明:该文提出的侵蚀体积计算方法可有效地量化表征CO_(2)-水-岩反应程度,CO_(2)-水处理后岩石表面不同区域的侵蚀差异性明显,岩石表面的侵蚀体积与均方根粗糙度之间存在显著的正比关系,随着均方根粗糙度的增大,侵蚀体积也相应上升。

不同表面结构氧化铟催化CO_(2)加氢制甲醇的反应机理

IN_(2)O_(3)对CO_(2)加氢合成甲醇具有较好的催化活性,为了进一步阐明IN_(2)O_(3)的失活机理与甲醇合成的构效关系,选择了立方晶相IN_(2)O_(3)的不同表面,采用密度泛函理论(DFT)研究了H_(2)还原无氧空位的IN_(2)O_(3)完美表面生成氧空位的反应机理,模拟了IN_(2)O_(3)催化剂在氢气作用下失活形成In团簇的微观过程。选择抗烧结性较好的IN_(2)O_(3)(111)阶梯表面,研究了CO_(2)的吸附活化以及甲醇生成的反应机理。结果表明:随着IN_(2)O_(3)表面氧空位数目的增加,H_(2)还原IN_(2)O_(3)的反应能垒升高,H_(2)解离成为氧空位生成的限速步骤;带有缺陷的IN_(2)O_(3)(111)阶梯表面具有较好的反应活性和抗烧结性能;CO_(2)加氢生成HCOO^(*)的反应路径是甲醇合成的优势路线,其中,bi-HCOO^(*)加氢生成bi-H_(2)CO^(*)并同时脱氧填补氧空位的过程为反应的限速步骤。

络合剂对固相法Cu/ZnO/In_(2)O_(3)催化剂的CO_(2)加氢制甲醇反应性能的影响

为了促进催化剂中Cu物种的分散,在金属硝酸盐中分别加入草酸、甲酸和柠檬酸,采用固态研磨合成Cu/ZnO/In_(2)O_(3)催化剂.结果表明:草酸的加入对Cu的分散效果最好,在280℃,2 MPa,3.6 L·gcat^(-1)·h^(-1),V(H2)∶V(CO_(2))=3∶1时,甲醇收率最高,达到2.1 mmol·gcat^(-1)·h^(-1).但甲酸在高温下会分解为CO_(2)和H_(2),导致制备的CuO/ZnO/In_(2)O_(3)催化剂部分还原,随后此催化剂在H_(2)预处理后被过度还原,形成Cu_(3)In_(7)合金相,导致甲醇产率降低.

CO_(2)地质封存与利用环境下水泥单矿C_(2)S的腐蚀速率

在CO_(2)地质封存和利用过程中,固井水泥容易与井下的酸性介质CO_(2)发生碳酸化反应,腐蚀固井水泥石造成水泥石力学性能大幅度衰退。针对水泥石单矿C_(2)S在CO_(2)地质封存和利用环境中腐蚀反应速率不清晰的问题,通过SEM、XRD以及TG的测试方法,定量分析C_(2)S腐蚀产物的变化规律。根据腐蚀产物CaCO_(3)的摩尔生成率和非稳态扩散渗透模型拟合得到腐蚀反应产物CaCO_(3)的生成系数α。SEM实验结果表明,腐蚀反应后C_(2)S水泥单矿颗粒的表面均有较大改变,生成了部分腐蚀产物CaCO_(3);XRD结果表明,单矿C_(2)S腐蚀产物CaCO_(3)的晶型主要有方解石和文石;TG测试结果表明,C_(2)S水泥单矿随着腐蚀龄期的增加,腐蚀产物的量均明显增加。拟合结果表明,C_(2)S腐蚀产物生成速率随着温度的升高而增大,90℃下CaCO_(3)腐蚀产物的生成速率系数α最大为54.90。

点阵CO_(2)激光Deep FX+Active FX模式治疗痤疮瘢痕疗效观察

目的:探究点阵CO_(2)激光Deep FX+Active FX模式治疗痤疮瘢痕疗效。方法:选取笔者医院2020年1月-2022年1月收治的116例痤疮瘢痕患者作为研究对象,按照随机数字表法分为观察组(采用点阵CO_(2)激光Deep FX+Active FX模式治疗)58例和对照组(采用点阵CO_(2)激光Deep FX模式治疗)58例。观察两组患者治疗后的临床疗效、瘢痕情况、疼痛与瘙痒情况、面部皮肤相关指数、不良反应。结果:观察组总有效率为96.55%,高于对照组86.21%(P<0.05)。治疗后,观察组患者的色泽、血管分布、厚度、柔软度评分均低于对照组(P<0.05)。治疗后,两组疼痛情况评分比较,差异无统计学意义(P>0.05);观察组瘙痒情况评分低于对照组(P<0.05)。观察组红斑指数、棕色斑指数、紫外线光斑指数、毛孔指数、纹路指数及斑点指数均低于对照组(P<0.05)。两组不良反应发生情况比较,差异无统计学意义(P>0.05)。结论:点阵CO_(2)激光Deep FX+Active FX模式能够提高痤疮瘢痕患者的临床疗效,改善瘢痕情况,降低瘙痒情况与面部皮肤相关指数,值得临床推广。

扩散吸附作用下CO_(2)非混相驱微观渗流特征模拟

利用数值模拟方法建立CO_(2)非混相驱数值模型,使用水平集法模拟扩散吸附作用下CO_(2)非混相驱和近混相驱的微观渗流规律,并对CO_(2)在孔隙中的微观渗流特征及扩散吸附特征进行研究,选取注入速度、扩散系数、吸附反应速率常数等参数研究近混相驱微观渗流特征的影响因素。研究结果表明:①相场法CO_(2)驱数值模拟采出程度为51.29%,水平集法CO_(2)驱数值模拟采出程度为53.60%,因此水平集法更适用于CO_(2)非混相驱的渗流过程模拟。②非混相驱条件下,CO_(2)优先向大孔隙扩散,采收率为87.7%,出口气体体积分数为71.60%,CO_(2)最大表面吸附浓度为3.16×10-4mol/m^(2);近混相驱条件下,CO_(2)更易向小孔隙扩散,采收率为91.1%,出口含气率为97.01%,CO_(2)最大表面吸附浓度为5.81×10-4mol/m^(2)。③近混相驱微观渗流特征受注入速度、扩散系数、吸附反应速率常数等因素影响。注入速度增大,出口含气率和采收率均提高;扩散系数和吸附反应速率常数增大,会使采收率提高,出口含气率下降。

Ce改性对CuLDH催化CO_(2)加氢制甲醇性能的影响

通过向CuMgAl水滑石(CuLDH)催化剂中添加不同量的Ce,合成了一系列Ce改性的CuLDH-Cex催化剂。采用X射线衍射(XRD)、N2吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)等分析手段对催化剂的理化性质进行表征。结果表明,添加Ce会改变Cu-LDH催化剂的水滑石结构,适量的Ce会增大催化剂的比表面积,改善了Cu颗粒的分散度。同时,适量的Ce有利于增加催化剂表面强碱性位点的密度和氧空位的数量,促进了CO_(2)的吸附和转化。Ce有利于调变催化剂表面的Cu^(+)/Cu^(0)比例,较高的Cu^(+)/Cu^(0)比例有利于甲醇的生成。当Ce/Cu比例为0.3时,在空速为9000 mL/(g·h),温度为240℃,压力为2.5 MPa的条件下,催化剂的CO_(2)的转化率为7.5%,甲醇选择性为78.4%,甲醇的时空收率最高可达362.8 g/(kg·h)。通过原位红外光谱(in-situ DRIFTS)证明CuLDH-Ce0.3催化剂在CO_(2)加氢合成甲醇过程中遵循HCOO*反应路径。

Fe促进的Pt@CeO_(2)催化剂用于CO_(2)加氢制C_(1)产品

在Pt@CeO_(2)核壳纳米球表面引入过渡金属助剂,探究了不同过渡金属的引入对其CO_(2)加氢性能的影响.研究结果表明,Fe物种的引入对加氢性能的提升效果最佳,液体C_(1)产率达到6.34×10^(-2) mmol·g^(-1)_(cat.)·h^(-1).透射电子显微镜(TEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、N_(2)吸附-脱附实验、CO_(2)程序升温脱附(CO_(2)-TPD)和H_(2)程序升温还原(H_(2)-TPR)等表征结果表明,Fe物种在Pt@CeO_(2)表面均匀分散,且Fe的存在降低了Pt物种的电荷密度,产生了更多的Pt^(2+)物种,提高了产物中甲醇的选择性.此外,Fe的存在还促进了更多氧空位(O_(v))的形成,进而促进了对CO_(2)的吸附及后续的加氢反应,提高了催化活性.

CO_(2)/N_(2)置换-降压强化开采天然气水合物

将天然气水合物中的CH_(4)置换为CO_(2)水合物是未来能源生产和温室气体控制的一种创新方法,但通常条件下CO_(2)对水合物中CH_(4)的置换效率较低,因此采用混合气联合降压强化置换的开采方法被提出。模拟(海底静水压力)在三轴应力约束状态下,通过注入固定比例[n(CO_(2))∶n(N_(2))=4∶1]的置换气体,研究降压强化置换过程中储层气相组分、CH_(4)开采率与CO_(2)封存率的变化。结果表明:CO_(2)+N_(2)联合降压强化置换法大幅度提高CH_(4)水合物置换效率,CH_(4)置换率相较于传统置换法的15.2%提升至35.22%,其中N_(2)直接贡献率占8.66%。通过降压强化,显著增强分解后期阶段气体扩散效果,提高CH_(4)开采率与CO_(2)封存率,对提高水合物转换开采具有良好的应用前景。

CO_(2)催化加氢合成甲醇研究进展

热催化CO_(2)加氢制甲醇具有显著的减碳效应,能够有效储存可再生能源,具有广阔的工业应用前景。介绍了CO_(2)加氢制甲醇的反应网络及其热力学挑战,并概述了其工艺流程、国内外工业应用情况,系统综述了近年来不同活性组分催化剂的研究进展,从催化剂的制备方式、活性位点、反应机理及动力学等方面阐述Cu基催化剂、贵金属催化剂、氧化物催化剂以及其他新型催化剂存在的问题和优势。重点阐述Cu基催化剂的构效关系,包括其活性组分结构、载体性质和助剂对催化活性和甲醇选择性的影响,并展望CO_(2)加氢制甲醇催化剂的未来发展方向。