Textured magnesium alloys usually exhibit anisotropic mechanical behavior due to the asymmetric activation of different twinning and slipping modes.This work focuses on the pyramidal slip responses of rolled AZ31 magn...Textured magnesium alloys usually exhibit anisotropic mechanical behavior due to the asymmetric activation of different twinning and slipping modes.This work focuses on the pyramidal slip responses of rolled AZ31 magnesium alloy under two loading conditions,compressive and tensile loading along the normal direction.Under the condition where the compressive loading direction is closely parallel to the c-axis of the unit cell,tensile twinning and basal slips are prohibited, dislocations then active and tend to accumulate at grain boundaries and form dislocation walls.Meanwhile,these dislocations exhibit zigzag morphologies,which result from the cross-slip from {10■1} first-order pyramidal plane to {11■2} second-order pyramidal plane,then back to {10■1} first-order pyramidal plane.Under the condition where tensile twins are prevalent,{10■1} first-order and {11■2} second-order pyramidal dislocations are favorable to be activated.Both types of dislocations behave climb-like dissociations onto the basal plane,forming zigzag dislocations.展开更多
Plastic deformation of TiAI and TiAI-V intermetallic compounds has been studied by com- pression experiment at various temperatures and strain rates.Results show that the plastic deformation in distinct temperature ra...Plastic deformation of TiAI and TiAI-V intermetallic compounds has been studied by com- pression experiment at various temperatures and strain rates.Results show that the plastic deformation in distinct temperature range is principally controlled by the mechanisms of Peierls-Nabarro,cross slip and creep of dislocations.For TiAI-V alloy deformed at a range of 600—700 K,the negative strain rate dependence of flow stress was observed,i.e.,the more the plastic strain is.the more the negative dependence will be.A possible mechanism of the anomaly could be interpreted by thermal activation of dislocation cross slipping.The effects of temperature and strain rate on work-hardening exponent were also studied and discussed.展开更多
We analyze a large-scale molecular dynamics simulation of work hardening in a model system of a ductile solid. With tensile loading, we observe emission of thousands of dislocations from two sharp cracks. The dislocat...We analyze a large-scale molecular dynamics simulation of work hardening in a model system of a ductile solid. With tensile loading, we observe emission of thousands of dislocations from two sharp cracks. The dislocations interact in a complex way, revealing three fundamental mechanisms of work-hardening in this ductile material. These are (1) dislocation cutting processes, jog formation and generation of trails of point defects; (2) activation of secondary slip systems by Frank-Read and cross-slip mechanisms; and (3) formation of sessile dislocations such as Lomer-Cottrell locks. We report the discovery of a new class of point defects referred to as trail of partial point defects, which could play an important role in situations when partial dislocations dominate plasticity. Another important result of the present work is the rediscovery of the Fleischer-mechanism of cross-slip of partial dislocations that was theoretically proposed more than 50 years ago, and is now, for the first time, confirmed by atomistic simulation. On the typical time scale of molecular dynamics simulations, the dislocations self-organize into a complex sessile defect topology. Our analysis illustrates numerous mechanisms formerly only conjectured in textbooks and observed indirectly in experiments. It is the first time that such a rich set of fundamental phenomena have been revealed in a single computer simulation, and its dynamical evolution has been studied. The present study exemplifies the simulation and analysis of the complex nonlinear dynamics of a many-particle system during failure using ultra-large scale computing.展开更多
Cyclic creep tests of Al-Mg alloy have been conducted at a wide range of stress and temperature.When Mg content is beyond 0.45%, the strain bursts can be observed in the cyclic creep curves.There exists a critical str...Cyclic creep tests of Al-Mg alloy have been conducted at a wide range of stress and temperature.When Mg content is beyond 0.45%, the strain bursts can be observed in the cyclic creep curves.There exists a critical stress for the occur- rence of the strain burst,which increases with an in- crease of Mg content and is almost 60% of the ul- timate tensile stress.The occurrence of strain burst is proposed to be controlled by the easiness of the cross-slip of dislocations.For Al-Mg alloy,the dynamic strain aging plays an important role in the strain bursts.展开更多
基金supported by the Bejing Municipal Natural Science Foundation (No.2214072)the Interdisciplinary Research Project for Young Teachers of USTB (Fundamental Research Funds for the Central Universities) (FRF-IDRY-20-034)the Office of China Postdoctoral Council under Award No.YJ20200248。
文摘Textured magnesium alloys usually exhibit anisotropic mechanical behavior due to the asymmetric activation of different twinning and slipping modes.This work focuses on the pyramidal slip responses of rolled AZ31 magnesium alloy under two loading conditions,compressive and tensile loading along the normal direction.Under the condition where the compressive loading direction is closely parallel to the c-axis of the unit cell,tensile twinning and basal slips are prohibited, dislocations then active and tend to accumulate at grain boundaries and form dislocation walls.Meanwhile,these dislocations exhibit zigzag morphologies,which result from the cross-slip from {10■1} first-order pyramidal plane to {11■2} second-order pyramidal plane,then back to {10■1} first-order pyramidal plane.Under the condition where tensile twins are prevalent,{10■1} first-order and {11■2} second-order pyramidal dislocations are favorable to be activated.Both types of dislocations behave climb-like dissociations onto the basal plane,forming zigzag dislocations.
文摘Plastic deformation of TiAI and TiAI-V intermetallic compounds has been studied by com- pression experiment at various temperatures and strain rates.Results show that the plastic deformation in distinct temperature range is principally controlled by the mechanisms of Peierls-Nabarro,cross slip and creep of dislocations.For TiAI-V alloy deformed at a range of 600—700 K,the negative strain rate dependence of flow stress was observed,i.e.,the more the plastic strain is.the more the negative dependence will be.A possible mechanism of the anomaly could be interpreted by thermal activation of dislocation cross slipping.The effects of temperature and strain rate on work-hardening exponent were also studied and discussed.
文摘We analyze a large-scale molecular dynamics simulation of work hardening in a model system of a ductile solid. With tensile loading, we observe emission of thousands of dislocations from two sharp cracks. The dislocations interact in a complex way, revealing three fundamental mechanisms of work-hardening in this ductile material. These are (1) dislocation cutting processes, jog formation and generation of trails of point defects; (2) activation of secondary slip systems by Frank-Read and cross-slip mechanisms; and (3) formation of sessile dislocations such as Lomer-Cottrell locks. We report the discovery of a new class of point defects referred to as trail of partial point defects, which could play an important role in situations when partial dislocations dominate plasticity. Another important result of the present work is the rediscovery of the Fleischer-mechanism of cross-slip of partial dislocations that was theoretically proposed more than 50 years ago, and is now, for the first time, confirmed by atomistic simulation. On the typical time scale of molecular dynamics simulations, the dislocations self-organize into a complex sessile defect topology. Our analysis illustrates numerous mechanisms formerly only conjectured in textbooks and observed indirectly in experiments. It is the first time that such a rich set of fundamental phenomena have been revealed in a single computer simulation, and its dynamical evolution has been studied. The present study exemplifies the simulation and analysis of the complex nonlinear dynamics of a many-particle system during failure using ultra-large scale computing.
文摘Cyclic creep tests of Al-Mg alloy have been conducted at a wide range of stress and temperature.When Mg content is beyond 0.45%, the strain bursts can be observed in the cyclic creep curves.There exists a critical stress for the occur- rence of the strain burst,which increases with an in- crease of Mg content and is almost 60% of the ul- timate tensile stress.The occurrence of strain burst is proposed to be controlled by the easiness of the cross-slip of dislocations.For Al-Mg alloy,the dynamic strain aging plays an important role in the strain bursts.
