RhB Adsorption Performance of Magnetic Adsorbent Fe_3O_4/RGO Composite and Its Regeneration through A Fenton-like Reaction

Adsorption is one of the most effective technologies in the treatment of colored matter containing wastewater. Graphene related composites display potential to be an effective adsorbent. However, the adsorption mechanism and their regeneration approach are still demanding more efforts. An effective magnetically separable absorbent, Fe3O4 and reduced graphene oxide(RGO) composite has been prepared by an in situ coprecipitation and reduction method. According to the characterizations of TEM, XRD, XPS, Raman spectra and BET analyses, Fe3O4 nanoparticles in sizes of 10-20 nm are well dispersed over the RGO nanosheets, resulting in a highest specific area of 296.2 m2/g. The rhodamine B adsorption mechanism on the composites was investigated by the adsorption kinetics and isotherms. The isotherms are fitting better by Langmuir model, and the adsorption kinetic rates depend much on the chemical components of RGO. Compared to active carbon, the composite shows 3.7 times higher adsorption capacity and thirty times faster adsorption rates. Furthermore,with Fe3O4 nanoparticles as the in situ catalysts, the adsorption performance of composites can be restored by carrying out a Fenton-like reaction, which could be a promising regeneration way for the adsorbents in the organic pollutant removal of wastewater.

Magnetic Fe_3O_4-Reduced Graphene Oxide Nanocomposites-Based Electrochemical Biosensing

An electrochemical biosensing platform was developed based on glucose oxidase(GOx)/Fe3O4-reduced graphene oxide(Fe3O4-RGO) nanosheets loaded on the magnetic glassy carbon electrode(MGCE).With the advantages of the magnetism, conductivity and biocompatibility of the Fe3O4-RGO nanosheets, the nanocomposites could be facilely adhered to the electrode surface by magnetically controllable assembling and beneficial to achieve the direct redox reactions and electrocatalytic behaviors of GOx immobilized into the nanocomposites. The biosensor exhibited good electrocatalytic activity, high sensitivity and stability. The current response is linear over glucose concentration ranging from 0.05 to 1.5 m M with a low detection limit of0.15 μM. Meanwhile, validation of the applicability of the biosensor was carried out by determining glucose in serum samples. The proposed protocol is simple, inexpensive and convenient, which shows great potential in biosensing application.

Preparation of Calcium Cross-linked Nano-Fe3O4 Modified Zeolite Microspheres for Cu^2+ Adsorption from Wastewater

Artificial zeolite was modified by nano-Fe3O4 for development of functional adsorbents.Subsequently,adsorbents such as calcium cross-linked nano-Fe3O4 microspheres (Ca-MS),calcium cross-linked nano-Fe3O4 modified zeolite microspheres (Ca-MZS) and iron cross-linked nano-Fe3O4 modified zeolite microspheres (Fe-MZS) were prepared and compared for their adsorption performance.The effects of adsorbent dosage,solution pH,initial concentration and ion content on the removal of Cu^2+ from wastewater are investigated,and the adsorption kinetics and isotherms for the adsorbent materials were analyzed.The experimental results indicate that for the initial concentration of Cu^2+ of 30 mg/L,the adsorption is noted to be most stable.The optimal initial pH for adsorbing Cu^2+ is observed to be 5.5.At an optimal dosage of Ca-MZS of 900 mg/L,the adsorption capacity is measured to be 28.25 mg/g,along with the removal rate of 72.49%.The addition of Na+ and K+ affects the adsorption of Cu^2+.For the Na^+ and K^+ concentration of 0.2 mmol/L,the Cu^2+ removal rate by Ca-MZS drops to 11.94% and 22.12%,respectively.As compared with the adsorbents such as Natural Zeolite (NZ),Ca-MS and Fe-MZS,Ca-MZS demonstrates the best removal effect in solution,where the removal rate reaches 84.27%,with the maximum adsorption capacity of 28.09 mg/g.The Cu^2+ adsorption kinetics of Ca-MZS is observed to follow the Elovich kinetic model,with the adsorption isotherm data fitting the Freundlich isotherm model by using the non-linear method.

Adsorption of BSA on Carbon-coated Fe_3O_4 Microspheres Activated with 1-ethyl-3-(3-dimethylaminopropyl)-Carbodiimide Hydrochloride

Carbon-coated Fe3O4（ Fe3O4/C） microspheres activated with 1-ethyl-3-（3-dimethylaminopropyl）-carbodiimide hydrochloride（EDC） were prepared, characterized and applied to adsorb bovine serum albumin（BSA）. The prepared magnetic microspheres had spherical core-shell structure with a uniform and continuous carbon coating coupled with activation by EDC, and possessed superparamagnetic characteristics. The experimental results showed that the adsorption amount of BSA on the EDC-activated Fe3O4/C（Fe3O4/C-EDC） microspheres was higher than that on the Fe3O4/C microspheres. The maximum adsorption of BSA on Fe3O4/C-EDC microspheres occurred at pH 4.7, which was the isoelectric point of BSA. At low concentrations（below 1.0 M）, salt had no noticeable effect on BSA adsorption. The BSA adsorption of Fe3O4/C-EDC microspheres had a better fit to the Langmuir model than the Freundlich isotherm and Temkin isotherm model, and the kinetic data were well described by the pseudo-second-order model. The adsorption equilibrium could be reached within 20 min. High desorption efficiency（97.6%） of BSA from Fe3O4/C-EDC microspheres was obtained with 0.5 M Na2HPO4（pH 9.4） as the desorbent.

Facile Synthesis of the Magnetic Metal Organic Framework Fe_3O_4@UiO-66-NH_2 for Separation of Strontium

A magnetic metal organic framework（MMOF） was synthesized and used to separate Sr^2＋ in aqueous solution. The shape and structure of prepared Fe3O4@UiO-66-NH2 were characterized, and the absorbed concentration of strontium was determined through inductively coupled plasma mass spectrometry. The results indicated that Fe3O4 and UiO-66-NH2 combined through chemical bonding. The experimental adsorption results for separation of Sr^2＋ in aqueous solution indicated that the adsorption of Sr^2＋ to Fe3O4@UiO-66-NH2 increased drastically from pH 11 to pH 13. The adsorption isotherm model indicated that the adsorption of Sr^2＋ conformed to the Freundlich isotherm model（R2 = 0.9919）. The MMOF thus inherited the superior qualities of magnetic composites and metal organic frameworks, and can easily be separated under an external magnetic field. This MMOF thus has potential applications as a magnetic adsorbent for low level radionuclide （90）Sr.

Magnetically Recoverable PEI/Titanate@Fe_3O_4 Photocatalysts: Fabrication and Photocatalytic Properties

The magnetically separable ternary polyetherimide/titanate@Fe3O4(PTF) photocatalysts of special heterostructure between magnetite(Fe3O4) microspheres and titanates nanosheets modified by polyetherimide(PEI) were successfully fabricated via a simple facile hydrothermal deposition method. The as-prepared photocatalysts were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, Transmission electron microscopy and UV-vis diffuse reflectance spectroscopy etc. The results showed that the as-fabricated material had a structure of Fe3O4microspheres coated with titanates nanosheets modified by PEI. The special interfacial contact between 3 D microsphere and 2 D nanosheets in the nanoarchitectures was formed via electrostatic attraction. Furthermore, the resulted photocatalysts were tested by degradation reaction of methylene blue under visible light irradiation and demonstrated an enhanced performance than the pure Fe3O4microspheres, and the photocatalytic activity enhanced with the molar ratio of Fe3O4microspheres and modified titanate gradually, which was attributed to the expansion of the surface area and the different electrostatic contact between the Fe3O4microspheres and titanate nanosheets. Moreover, the obtained results revealed the high yield magnetic separation and efficient reusability of PTF-5(96.7%) over 3 times reuse.

Deposition and Magnetic Properties of Fe_3O_4/Fe/Fe_3O_4 Tri-layer Films

The Fe_3O_4/Fe/Fe_3O_4 (MIM) tri-layer films (200 nm/12-93 nm/200 um) were prepared on Si(100) by DC-magnetron reactive-sputtering followed by air- or vacuum-annealing at 280-400℃ for 1.5 h, respectively. Magnetic properties and phases under different sandwich and annealing conditions were studied. In MIM structure, the incorporation of the interlayer iron does increase the magnetization measured under 8 kOe (M_8K), but reduce coercivity (H_c). The H_c of asdeposited films decreases from 354 Oe to 74 Oe; while M_8K increases from 254 to 392 emu/cc. By annealing in air, the whole MIM tri-layer film becomes γ-F_e2O_3, H_c is about 550 O_e and M_8K is around 250 emu/cc. The coercivity mechanism of as-deposited and annealed MIM trilayer films belongs to domain-wall pinning type. δM plots show that when the interlayer Fe thickness is 12 um, the Fe and Fe_3O_4 layers are decoupled in the as-deposited and annealed states; while it is coupled in the as deposited state when the Fe thickness increases to 23 um. Vacuum annealing of the MIM films leads to increase in both coercivity and magnetization, and to enhance the exchange coupling between layers.

Electrochemical Sensing of Heavy Metal Ions based on Monodisperse Single-crystal Fe_3O_4 Microspheres

Single-crystal FeOwith monodisperse microspheres structure has been used for individual electrochemical detection of heavy metal ions. Morphology and structure of the as-prepared FeOmicrospheres were characterized by scanning electron microscopy(SEM), transmission electron microscopy(TEM) and X-ray diffraction(XRD). Meanwhile the electrochemical properties of the FeOmicrospheres modified glass carbon electrodes(GCE) were characterized by cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS), and the enhanced electrochemical response in stripping voltammetry for individual detection of Pb(Ⅱ), Hg(Ⅱ), Cu(Ⅱ), and Cd(Ⅱ) was evaluated using square wave anodic stripping voltammetry(SWASV). With high specific surface area and excellent catalytic activity toward heavy metal ions, the as-prepared monodisperse and single-crystal FeOmicrospheres show a preferable sensing sensitivity(22.2 μA/μM) and limit of detection(0.0699 μM) toward Pb(Ⅱ). Furthermore, the electrochemical sensor of FeOmicrospheres exhibits excellent stability and it also offers potential practical applicability for the determination of heavy metal ions in real water samples. This study provides a potential simple and low cost iron oxide for the construction of sensitive electrochemical sensors applied to monitor and control the pollution of toxic metal ions.

Modification of Fe_3O_4 Magnetic Nanoparticles by L-dopa or Dopamine as an Enzyme Support

Fe3O4 magnetic nanoparticles were prepared by co-precipitation of Fe^2＋ and Fe^3＋ in an ammonia solution, and its size was about 36 nm measured by an atomic force microscope. Fe3O4 magnetic nanoparticles were modified by L-dopa or dopamine using sonication method. The analysis of FTIR clearly indicated the formation of Fe-O-C bond. Direct immobilization of trypsin （EC： 3.4.21.4） on Fe3O4 magnetic nanoparticles with L-dopa and dopamine spacer was investigated using glutaraldehyde as a coupling agent. No significant changes in the size and magnetic property of the three kinds of magnetic nanoparticles linked with or without trypsin were observed. The existence of the spacer molecule on magnetic nanoparticles could greatly improve the activity and the storage stability of bound trypsin through increasing the flexibility of enzyme and changing the microenvironment on nanoparticles surface compared to the naked magnetic nanoparticles.

Synthesis of Fe_3O_4 Magnetic Powder from Spent Pickling Liquors

Spent pickling liquors pose a serious environmental problem in most industrialized countries, mainly owing to their corrosive properties and their ferrous iron and hydrochloric acid content. In this paper, spent pickling liquor was used as an inexpensive raw material to prepare Fe304 magnetic powder via an oxidation method. Being able to recover the dissolved iron from spent pickling liquors would not only salvage a valuable material but also render the effluent environmentally benign. The structure of the Fe_3O_4 magnetic powder was characterized by X-ray diffraction. The morphology and size were characterized by scanning electron microscopy and transmission electron microscopy. Their magnetic properties were tested at room temperature by a vibrating sample magnetometer. In addition, the saturation magnetization of Fe_3 O_4 products can be further enhanced to 96.1 emu/g after purification.

Synthesis, Electrical and Magnetic Properties of Fe304 Doped by Dy^3＋

The Dy^3＋ -doped Fe3O4 samples were synthesized by sol-gel method, and the effects of dopant on the electrical and magnetic properties were investigated. According to XRD analysis, the high concentration doping of dysprosium ions in Fe3O4 can not be obtained due to the difference of ionic radius, and Fe^3 ＋ ions are replaced by only a small amount of dysprosium ions. The magnetic property was characterized by VSM. The substitution results in the change of saturation magnetization, which may be due to the complex effects of increasing magnetization resulted from Dy^3＋ substitution and decreasing magnetization resulted from the impurity. The electrical property was characterized by four-probe method. With the increasing eoped content, magnetoresistance also increases, then decreases, and increases again. The spin-polarization of doped samples is lower than that of Fe3O4. Lower spin-polarization results in lower tunneling magnetoresistance. Fortunately, barrier was obtained by the second phase at the same time when sample was synthesized. The increase of appropriate barrier height leads to the change of tunneling magnetoresistance.

Synthesis and Characterization of Superparamagnetic Fe₃O₄@SiO₂Core-Shell Composite Nanoparticles

The Fe3O4@SiO2 composite nanoparticles were obtained from as-synthesized magnetite (Fe3O4) nanoparticles through the modified St?ber method. Then, the Fe3O4 nanoparticles and Fe3O4@SiO2 composite nanoparticles were characterized by means of X-ray diffraction (XRD), Raman spectra, scanning electron microscope (SEM) and vibrating sample magnetometer (VSM). Recently, the studies focus on how to improve the dispersion of composite particle and achieve good magnetic performance. Hence effects of the volume ratio of tetraethyl orthosilicate (TEOS) and magnetite colloid on the structural, morphological and magnetic properties of the composite nanoparticles were systematically investi-gated. The results revealed that the Fe3O4@SiO2 had better thermal stability and dispersion than the magnetite nanoparticles. Furthermore, the particle size and magnetic property of the Fe3O4@SiO2 composite nanoparticles can be adjusted by changing the volume ratio of TEOS and magnetite colloid.

Magnetic field aligned orderly arrangement of Fe3O4 nanoparticles in CS/PVA/Fe3O4 membranes

The CS/PVA/Fe_3O_4 nanocomposite membranes with chainlike arrangement of Fe_3O_4 nanoparticles are prepared by a magnetic-field-assisted solution casting method. The aim of this work is to investigate the relationship between the microstructure of the magnetic anisotropic CS/PVA/Fe_3O_4 membrane and the evolved macroscopic physicochemical property. With the same doping content, the relative crystallinity of CS/PVA/Fe_3O_4-M is lower than that of CS/PVA/Fe_3O_4.The Fourier transform infrared spectroscopy（FT-TR） measurements indicate that there is no chemical bonding between polymer molecule and Fe_3O_4 nanoparticle. The Fe_3O_4 nanoparticles in CS/PVA/Fe_3O_4 and CS/PVA/Fe_3O_4-M are wrapped by the chains of CS/PVA, which is also confirmed by scanning electron microscopy（SEM） and x-ray diffraction（XRD）analysis. The saturation magnetization value of CS/PVA/Fe_3O_4-M obviously increases compared with that of non-magnetic aligned membrane, meanwhile the transmittance decreases in the UV-visible region. The o-Ps lifetime distribution provides information about the free-volume nanoholes present in the amorphous region. It is suggested that the microstructure of CS/PVA/Fe_3O_4 membrane can be modified in its curing process under a magnetic field, which could affect the magnetic properties and the transmittance of nanocomposite membrane. In brief, a full understanding of the relationship between the microstructure and the macroscopic property of CS/PVA/Fe_3O_4 nanocomposite plays a vital role in exploring and designing the novel multifunctional materials.

Field-variable magnetic domain characterization of individual 10 nm Fe3O4 nanoparticles

The local detection of magnetic domains of isolated 10 nm Fe3O4 magnetic nanoparticles(MNPs) has been achieved by field-variable magnetic force microscopy(MFM) with high spatial resolution.The domain configuration of an individual MNP shows a typical dipolar response.The magnetization reversal of MNP domains is governed by a coherent rotation mechanism, which is consistent with the theoretical results given by micromagnetic calculations.Present results suggest that the field-variable MFM has great potential in providing nanoscale magnetic information on magnetic nanostructures,such as nanoparticles, nanodots, skyrmions, and vortices, with high spatial resolution.This is crucial for the development and application of magnetic nanostructures and devices.

Controllable Synthesis and Magnetic Properties of Monodisperse Fe_3O_4 Nanoparticles

Magnetite （Fe3O4） nanoparticles with different sizes and shapes are synthesized by the thermal decomposition method. Two approaches, non-injection one-pot and hot-injection methods, are designed to investigate the growth mechanism in detail. It is found that the size and shape of nanoparticles are determined by adjusting the precursor concentration and duration time, which can be well explained by the mechanism based on the LaMer model in our synthetic system. The monodisperse Fe3O4 nanoparticles have a mean diameter from 5nm to 16nm, and shape evolution from spherical to triangular and cubic. The magnetic properties are size-dependent, and Fe3O4 nanoparticles in small size about 5 nm exhibit superparamagnetie properties at room temperature and maximum saturation magnetization approaches to 78 emu/g, whereas Fe3O4 nanoparticles develop ferromagnetic properties when the diameter increases to about 16nm.

Preparation and Characterization of Magnetic Fe3O4-PAMAM-antibody Complex and Its Application in the Removal of Tetracycline from Wastewater

Antigens and antibodies can bind specifically, so antibiotic antibody shows potential biological and environmental applications on the removal of antibiotic. In the present study, novel antibody complex was synthesized from polyamide-amine dendrimer immobilized tetracycline(TC) antibody with the encapsulation of magnetic Fe3O4 nanoparticles. As-prepared magnetic Fe3O4-PAMAM-antibody complexes were characterized by different techniques such as Fourier transform infrared(FT-IR), X-ray diffraction(XRD), Nuclear magnetic resonance(NMR)and ultraviolet(UV) analysis spectra. The prepared antibody complexes exhibited high adsorption properties for TC from aqueous solutions. These results suggest that the antibody complex expects to be a potential candidate for the wastewater treatment.

Preparation of Fe_3O_4/PS Magnetic Particles by Dispersion Polymerization

Fe_3O_4/PS magnetic particles with core/shell structure has been prepared in the presence of Fe3O4 magnetic fluid in ethanol/water mixture.Magnetic particles with diameter size range from 5. 54 t0 187. 32 μm were obtained by different reaction conditions.Some parameters such as ethanol, PEG and monomer which affect particle size diameter and size distribution are discussed briefly in this paper.

Dispersibility, Shape and Magnetic Properties of Nano-Fe₃O₄Particles

Nano-Fe3O4 particles were prepared by a two-step microemulsion method, the influence of molar ratio of water to NP-5 (R), alkali concentration and temperature on dispersibility and shape of the nanoparticles were discussed. Magnetic studies were also carried out using VSM in this paper. It was found that the optimum preparation parameters are R = 6.0, alkali concentration = 2.5 mol.L–1, initial total iron concentration as 0.88 mol.L–1, and the temperature being 30°C, the prepared nano magnetite particles have uniform size and good dispersibility with a crystal structure belonging to cubicFe3O4 and lattice parameters of a = 8.273 ?. The results of magnetic studies show, magnetic properties of particles are influenced by dispersibility of nanoparticles which depends on size of clusters. The better dispersibility of nanoparticles leads to more ordered inner magnetic vector, and so the stronger magnetic behavior of nano-Fe3O4 particles.

Fe_(3)O_(4)/PI磁性纳米复合微球的研究进展

Fe_(3)O_(4)/PI磁性复合微球因具有聚酰亚胺复合材料的结构特点以及对无机纳米粒子的磁场反应特点,可使纳米复合材料能够在外部磁场的影响下迅速地分散与处理并反复使用。本文对Fe_(3)O_(4)/PI磁性复合微球近年来的制作方法及其应用进行了综述,并对未来研究发展的应用和存在的问题进行了分析与展望。

亲水性磁性Fe_(3)O_(4)复合微球的制备及其对亚甲基蓝吸附的性能研究

采用甲基丙烯酸甲酯与丙烯酸的混合微乳液经悬浮聚合法一步制备出含—COO^(-)的亲水性磁性Fe3O4复合微球。对样品的形貌和结构进行表征,研究了pH、温度、亚甲基蓝(MB)初始质量浓度及吸附时间对复合微球吸附率的影响。结果表明:磁性复合微球粒径约300nm,有效磁含量约85%,表面Zeta电位约为-47.53mV,在水中具有良好的分散性和超顺磁性,能够对水体中的MB进行吸附分离;吸附行为符合准二级动力学方程,有效吸附的pH范围较宽,受环境温度影响较小,对初始质量浓度为10mg/L的MB吸附效率可达98.75%,吸附速率常数随MB初始质量浓度升高而减小,最大吸附量约为91mg/g,重复利用5次吸附率均超过91%。