To the transverse beam collimation system in a rapid cycling synchrotron,an important component is the primary collimator,which improves emittance of the beam halo particles such that the particles outside the predefi...To the transverse beam collimation system in a rapid cycling synchrotron,an important component is the primary collimator,which improves emittance of the beam halo particles such that the particles outside the predefined trajectory can be absorbed by the secondary collimators.Given the material properties and power deposition distribution,the beam scraper of the primary collimator is a0.17 mm tungsten foil on a double face-wedged copper block of 121.5 mm x 20 mm.The heat is transferred to the outside by a φ34 mm copper rod.In this paper,for minimizing brazing thermal stress,we report our theoretical analysis and tests on brazing the tungsten and copper materials which differ greatly in size.We show that the thermal stress effect can be controlled effectively by creating stress relief grooves on the copper block and inserting a tungsten transition layer into the copper block.This innovation contributes to the successful R&D of the primary collimator.And this study may be of help for working out a brazing plan of similar structures.展开更多
The injecton pulsed bending bump magnets of Rapid Cycling Synchrotron (RCS) in China Spalla- tion Neutron Source (CSNS) consist of four horizontal bending (BH) magnets and four vertical bending (BV) magnets. T...The injecton pulsed bending bump magnets of Rapid Cycling Synchrotron (RCS) in China Spalla- tion Neutron Source (CSNS) consist of four horizontal bending (BH) magnets and four vertical bending (BV) magnets. The BH magnets are operated at a repetition rate of 25 Hz and are excited with a trapezoid rectangle waveform with about 1.6 milliseconds duration. The eddy current is induced in BH magnets and in the end plates it is expected to be large, so the heat generation is of our great concern. In this paper, the eddy current loss of the BH magnet has been investigated and calculated by using a coupling method of 3D electromagnetic and thermal analysis. The accuracy of the analysis is confirmed by testing the prototype BH magnet. The end plate temperature of the BH magnet provided with slit cuts has been decreased obviously and met the requirements.展开更多
The China Spallation Neutron Source/Rapid Cycling Synchrotron (CSNS/RCS) accelerates a high-intensity proton beam from 80 MeV to 1.6 GeV. Since the beam current and beam power is high, the beam loading is a severe p...The China Spallation Neutron Source/Rapid Cycling Synchrotron (CSNS/RCS) accelerates a high-intensity proton beam from 80 MeV to 1.6 GeV. Since the beam current and beam power is high, the beam loading is a severe problem for the stability of the circulating beam in the RCS. To study the beam loading effect in the CSNS/RCS theoretically, the RLC circuit model of the rf cavity, the method of Fast Fourier Transform and the method of Laplace transform have been employed to obtain the impedance of the rf system, the beam spectrum and the beam-induced voltage, respectively. Based on these physical models, the beam dynamics equations have been revised and a beam loading model has been constructed in the simulation code ORIENT. By using the code, the beam loading effect on the rf system of the CSNS/RCS has been investigated. Some simulation results have been obtained and conclusions have been drawn.展开更多
基金supported by the National Natural Science Foundation of China(No.11375217)
文摘To the transverse beam collimation system in a rapid cycling synchrotron,an important component is the primary collimator,which improves emittance of the beam halo particles such that the particles outside the predefined trajectory can be absorbed by the secondary collimators.Given the material properties and power deposition distribution,the beam scraper of the primary collimator is a0.17 mm tungsten foil on a double face-wedged copper block of 121.5 mm x 20 mm.The heat is transferred to the outside by a φ34 mm copper rod.In this paper,for minimizing brazing thermal stress,we report our theoretical analysis and tests on brazing the tungsten and copper materials which differ greatly in size.We show that the thermal stress effect can be controlled effectively by creating stress relief grooves on the copper block and inserting a tungsten transition layer into the copper block.This innovation contributes to the successful R&D of the primary collimator.And this study may be of help for working out a brazing plan of similar structures.
文摘The injecton pulsed bending bump magnets of Rapid Cycling Synchrotron (RCS) in China Spalla- tion Neutron Source (CSNS) consist of four horizontal bending (BH) magnets and four vertical bending (BV) magnets. The BH magnets are operated at a repetition rate of 25 Hz and are excited with a trapezoid rectangle waveform with about 1.6 milliseconds duration. The eddy current is induced in BH magnets and in the end plates it is expected to be large, so the heat generation is of our great concern. In this paper, the eddy current loss of the BH magnet has been investigated and calculated by using a coupling method of 3D electromagnetic and thermal analysis. The accuracy of the analysis is confirmed by testing the prototype BH magnet. The end plate temperature of the BH magnet provided with slit cuts has been decreased obviously and met the requirements.
基金Supported by National Natural Science Foundation of China(11175193)
文摘The China Spallation Neutron Source/Rapid Cycling Synchrotron (CSNS/RCS) accelerates a high-intensity proton beam from 80 MeV to 1.6 GeV. Since the beam current and beam power is high, the beam loading is a severe problem for the stability of the circulating beam in the RCS. To study the beam loading effect in the CSNS/RCS theoretically, the RLC circuit model of the rf cavity, the method of Fast Fourier Transform and the method of Laplace transform have been employed to obtain the impedance of the rf system, the beam spectrum and the beam-induced voltage, respectively. Based on these physical models, the beam dynamics equations have been revised and a beam loading model has been constructed in the simulation code ORIENT. By using the code, the beam loading effect on the rf system of the CSNS/RCS has been investigated. Some simulation results have been obtained and conclusions have been drawn.