We present a method for computed tomography(CT)image processing and modeling for tibia microstructure,achieved by using computer graphics and fractal theory.Given the large-scale image data of tibia species with DICOM...We present a method for computed tomography(CT)image processing and modeling for tibia microstructure,achieved by using computer graphics and fractal theory.Given the large-scale image data of tibia species with DICOM standard for clinical applications,we take advantage of algorithms such as image binarization,hot pixel removing and close operation to obtain visually clear image for tibia microstructure.All of these images are based on 20 CT scanning images with 30μm slice thickness and 30μm interval and continuous changes in pores.For each pore,we determine its profile by using an improved algorithm for edge detection.Then,to calculate its three-dimensional fractal dimension,we measure the circumference perimeter and area of the pores of bone microstructure using a line fitting method based on the least squares.Subsequently,we put forward an algorithm for the pore profiles through ellipse fitting.The results show that the pores have significant fractal characteristics because of the good linear correlation between the perimeter and the area parameters in log–log scale coordinates system,and the ratio of the elliptical short axis to the long axis through ellipse fitting tends to 0.6501.Based on support vector machine and structural risk minimization principle,we put forward a mapping database theory of structure parameters among the pores of CT images and fractal dimension,Poisson’s ratios,porosity and equivalent aperture.On this basis,we put forward a new concept for 3D modeling called precision-measuring digital expressing to reconstruct tibia microstructure for human hard tissue.展开更多
In order to fast transmission and processing of medical images and do not need to install client and plug-ins, the paper designed a kind of medical image reading system based on BS structure. This system improved the ...In order to fast transmission and processing of medical images and do not need to install client and plug-ins, the paper designed a kind of medical image reading system based on BS structure. This system improved the existing IWEB in the framework of PACS client image processing, medical image based on the service WEB completion port model. To realize the fast loading images with high concurrency, compared with the traditional WEB PACS, this system has the advantages of no client without plug-in installation, at the same time in the transmission and processing performance image has been greatly improved.展开更多
Cone-beam CT (CBCT) scanners are based on volumetric tomography, using a 2D extended digital array providing an area detector [1,2]. Compared to traditional CT, CBCT has many advantages, such as less X-ray beam limita...Cone-beam CT (CBCT) scanners are based on volumetric tomography, using a 2D extended digital array providing an area detector [1,2]. Compared to traditional CT, CBCT has many advantages, such as less X-ray beam limitation, and rapid scan time, etc. However, in CBCT images the x-ray beam has lower mean kilovolt (peak) energy, so the metal artifact is more pronounced on. The position of the shadowed region in other views can be tracked by projecting the 3D coordinates of the object. Automatic image segmentation was used to replace the pixels inside the metal object with the boundary pixels. The modified projection data, using synthetically Radon Transformation, were then used to reconstruct a new back projected CBCT image. In this paper, we present a method, based on the morphological, area and pixel operators, which we applied on the Radon transformed image, to reduce the metal artifacts in CBCT, then we built the Radon back project images using the radon invers transformation. The artifacts effects on the 3d-reconstruction is that, the soft tissues appears as bones or teeth. For the preprocessing of the CBCT images, two methods are used to recognize the noisy black areas that the first depends on thresholding and closing algorithm, and the second depends on tracing boundaries after using thresholding algorithm too. The intensity of these areas is the lowest in the image than other tissues, so we profit this property to detect the edges of these areas. These two methods are applied on phantom and patient image data. It deals with reconstructed CBCT dicom images and can effectively reduce such metal artifacts. Due to the data of the constructed images are corrupted by these metal artifacts, qualitative and quantitative analysis of CBCT images is very essential.展开更多
Specific medical data has limitations in that there are not many numbers and it is not standardized.to solve these limitations,it is necessary to study how to efficiently process these limited amounts of data.In this ...Specific medical data has limitations in that there are not many numbers and it is not standardized.to solve these limitations,it is necessary to study how to efficiently process these limited amounts of data.In this paper,deep learning methods for automatically determining cardiovascular diseases are described,and an effective preprocessing method for CT images that can be applied to improve the performance of deep learning was conducted.The cardiac CT images include several parts of the body such as the heart,lungs,spine,and ribs.The preprocessing step proposed in this paper divided CT image data into regions of interest and other regions using K-means clustering and the Grabcut algorithm.We compared the deep learning performance results of original data,data using only K-means clustering,and data using both K-means clustering and the Grabcut algorithm.All data used in this paper were collected at Soonchunhyang University Cheonan Hospital in Korea and the experimental test proceeded with IRB approval.The training was conducted using Resnet 50,VGG,and Inception resnet V2 models,and Resnet 50 had the best accuracy in validation and testing.Through the preprocessing process proposed in this paper,the accuracy of deep learning models was significantly improved by at least 10%and up to 40%.展开更多
This paper proposes a novel method for analyzing a textile fabric structure to extract positional information regarding each yarn using three-dimensional X-ray computed tomography(3D CT) image.Positional relationship ...This paper proposes a novel method for analyzing a textile fabric structure to extract positional information regarding each yarn using three-dimensional X-ray computed tomography(3D CT) image.Positional relationship among the yarns can be reconstructed using the extracted yarn positional information.In this paper,a sequence of points on the center line of each yarn of the sample is defined as the yarn positional information,since the sequence can be regarded as the representative position of the yarn.The sequence is extracted by tracing the yarn.The yarn is traced by estimating the yarn center and direction and correlating the yarn part of the 3D CT image with a 3D yarn model,which is moved along the estimated yarn direction.The trajectory of the center of the yarn model corresponds to the positional information of the yarn.The application of the proposed method is shown by experimentally applying the proposed method to a 3D CT image of a double-layered woven fabric.Furthermore,the experimental results for a plain knitted fabric show that this method can be applied to even knitted fabrics.展开更多
This paper proposes a more inclusive statistical model for predicting image noise in Computed Tomography (CT), associated with scanning factors, considering the effect of beam hardening and image processing filters. I...This paper proposes a more inclusive statistical model for predicting image noise in Computed Tomography (CT), associated with scanning factors, considering the effect of beam hardening and image processing filters. It is based on power functions where the levels of the parameters will determine the rate of noise variation with respect to a given scanning factor. It includes the influence of tube potential, tube current, slice thickness, Field of View (FOV), reconstruction methods and post-processing filters. To validate the model, tomographic measurements were made by using a PMMA phantom that simulates paediatric head and adult abdomen, a PET bottle was used to simulate the head of the new-born. The influence of ROI (Region Of Interest) size over nonlinear model parameters was analysed, and high variations of powers of attenuation and FOV were found depending on ROI size. A nonlinear robust regression method was used. The validation was performed graphically by weighted residual analysis. A nonlinear noise model was obtained with an adjusted coefficient of determination for ROI sizes between 10% and 70% of the phantom diameter or FOV. The model confirms the significance of the tube current, slice thickness and beam hardening effect on image. The process of estimation of the parameters of the model by Nonlinear Robust Regression turned out to be optimal.展开更多
基金supported by the National Key Research and Development Program of China(No.2016YFC1100600)the National Nature Science Foundation of China(Nos.61540006,61672363).
文摘We present a method for computed tomography(CT)image processing and modeling for tibia microstructure,achieved by using computer graphics and fractal theory.Given the large-scale image data of tibia species with DICOM standard for clinical applications,we take advantage of algorithms such as image binarization,hot pixel removing and close operation to obtain visually clear image for tibia microstructure.All of these images are based on 20 CT scanning images with 30μm slice thickness and 30μm interval and continuous changes in pores.For each pore,we determine its profile by using an improved algorithm for edge detection.Then,to calculate its three-dimensional fractal dimension,we measure the circumference perimeter and area of the pores of bone microstructure using a line fitting method based on the least squares.Subsequently,we put forward an algorithm for the pore profiles through ellipse fitting.The results show that the pores have significant fractal characteristics because of the good linear correlation between the perimeter and the area parameters in log–log scale coordinates system,and the ratio of the elliptical short axis to the long axis through ellipse fitting tends to 0.6501.Based on support vector machine and structural risk minimization principle,we put forward a mapping database theory of structure parameters among the pores of CT images and fractal dimension,Poisson’s ratios,porosity and equivalent aperture.On this basis,we put forward a new concept for 3D modeling called precision-measuring digital expressing to reconstruct tibia microstructure for human hard tissue.
文摘In order to fast transmission and processing of medical images and do not need to install client and plug-ins, the paper designed a kind of medical image reading system based on BS structure. This system improved the existing IWEB in the framework of PACS client image processing, medical image based on the service WEB completion port model. To realize the fast loading images with high concurrency, compared with the traditional WEB PACS, this system has the advantages of no client without plug-in installation, at the same time in the transmission and processing performance image has been greatly improved.
文摘Cone-beam CT (CBCT) scanners are based on volumetric tomography, using a 2D extended digital array providing an area detector [1,2]. Compared to traditional CT, CBCT has many advantages, such as less X-ray beam limitation, and rapid scan time, etc. However, in CBCT images the x-ray beam has lower mean kilovolt (peak) energy, so the metal artifact is more pronounced on. The position of the shadowed region in other views can be tracked by projecting the 3D coordinates of the object. Automatic image segmentation was used to replace the pixels inside the metal object with the boundary pixels. The modified projection data, using synthetically Radon Transformation, were then used to reconstruct a new back projected CBCT image. In this paper, we present a method, based on the morphological, area and pixel operators, which we applied on the Radon transformed image, to reduce the metal artifacts in CBCT, then we built the Radon back project images using the radon invers transformation. The artifacts effects on the 3d-reconstruction is that, the soft tissues appears as bones or teeth. For the preprocessing of the CBCT images, two methods are used to recognize the noisy black areas that the first depends on thresholding and closing algorithm, and the second depends on tracing boundaries after using thresholding algorithm too. The intensity of these areas is the lowest in the image than other tissues, so we profit this property to detect the edges of these areas. These two methods are applied on phantom and patient image data. It deals with reconstructed CBCT dicom images and can effectively reduce such metal artifacts. Due to the data of the constructed images are corrupted by these metal artifacts, qualitative and quantitative analysis of CBCT images is very essential.
基金This research was supported under the framework of an international cooperation program managed by the National Research Foundation of Korea(NRF-2019K1A3A1A20093097)supported by the National Key Research and Development Program of China(2019YFE0107800)was supported by the Soonchunhyang University Research Fund。
文摘Specific medical data has limitations in that there are not many numbers and it is not standardized.to solve these limitations,it is necessary to study how to efficiently process these limited amounts of data.In this paper,deep learning methods for automatically determining cardiovascular diseases are described,and an effective preprocessing method for CT images that can be applied to improve the performance of deep learning was conducted.The cardiac CT images include several parts of the body such as the heart,lungs,spine,and ribs.The preprocessing step proposed in this paper divided CT image data into regions of interest and other regions using K-means clustering and the Grabcut algorithm.We compared the deep learning performance results of original data,data using only K-means clustering,and data using both K-means clustering and the Grabcut algorithm.All data used in this paper were collected at Soonchunhyang University Cheonan Hospital in Korea and the experimental test proceeded with IRB approval.The training was conducted using Resnet 50,VGG,and Inception resnet V2 models,and Resnet 50 had the best accuracy in validation and testing.Through the preprocessing process proposed in this paper,the accuracy of deep learning models was significantly improved by at least 10%and up to 40%.
基金Grants-in-Aid for Scientific Research from the Japan Society for the Promotion of Science(2006-No.18800064)
文摘This paper proposes a novel method for analyzing a textile fabric structure to extract positional information regarding each yarn using three-dimensional X-ray computed tomography(3D CT) image.Positional relationship among the yarns can be reconstructed using the extracted yarn positional information.In this paper,a sequence of points on the center line of each yarn of the sample is defined as the yarn positional information,since the sequence can be regarded as the representative position of the yarn.The sequence is extracted by tracing the yarn.The yarn is traced by estimating the yarn center and direction and correlating the yarn part of the 3D CT image with a 3D yarn model,which is moved along the estimated yarn direction.The trajectory of the center of the yarn model corresponds to the positional information of the yarn.The application of the proposed method is shown by experimentally applying the proposed method to a 3D CT image of a double-layered woven fabric.Furthermore,the experimental results for a plain knitted fabric show that this method can be applied to even knitted fabrics.
文摘This paper proposes a more inclusive statistical model for predicting image noise in Computed Tomography (CT), associated with scanning factors, considering the effect of beam hardening and image processing filters. It is based on power functions where the levels of the parameters will determine the rate of noise variation with respect to a given scanning factor. It includes the influence of tube potential, tube current, slice thickness, Field of View (FOV), reconstruction methods and post-processing filters. To validate the model, tomographic measurements were made by using a PMMA phantom that simulates paediatric head and adult abdomen, a PET bottle was used to simulate the head of the new-born. The influence of ROI (Region Of Interest) size over nonlinear model parameters was analysed, and high variations of powers of attenuation and FOV were found depending on ROI size. A nonlinear robust regression method was used. The validation was performed graphically by weighted residual analysis. A nonlinear noise model was obtained with an adjusted coefficient of determination for ROI sizes between 10% and 70% of the phantom diameter or FOV. The model confirms the significance of the tube current, slice thickness and beam hardening effect on image. The process of estimation of the parameters of the model by Nonlinear Robust Regression turned out to be optimal.
