The geometry of joints has a significant influence on the mechanical properties of rocks.To simplify the curved joint shapes in rocks,the joint shape is usually treated as straight lines or planes in most laboratory e...The geometry of joints has a significant influence on the mechanical properties of rocks.To simplify the curved joint shapes in rocks,the joint shape is usually treated as straight lines or planes in most laboratory experiments and numerical simulations.In this study,the computerized tomography (CT) scanning and photogrammetry were employed to obtain the internal and surface joint structures of a limestone sample,respectively.To describe the joint geometry,the edge detection algorithms and a three-dimensional (3D) matrix mapping method were applied to reconstruct CT-based and photogrammetry-based jointed rock models.For comparison tests,the numerical uniaxial compression tests were conducted on an intact rock sample and a sample with a joint simplified to a plane using the parallel computing method.The results indicate that the mechanical characteristics and failure process of jointed rocks are significantly affected by the geometry of joints.The presence of joints reduces the uniaxial compressive strength (UCS),elastic modulus,and released acoustic emission (AE) energy of rocks by 37%–67%,21%–24%,and 52%–90%,respectively.Compared to the simplified joint sample,the proposed photogrammetry-based numerical model makes the most of the limited geometry information of joints.The UCS,accumulative released AE energy,and elastic modulus of the photogrammetry-based sample were found to be very close to those of the CT-based sample.The UCS value of the simplified joint sample (i.e.38.5 MPa) is much lower than that of the CT-based sample (i.e.72.3 MPa).Additionally,the accumulative released AE energy observed in the simplified joint sample is 3.899 times lower than that observed in the CT-based sample.CT scanning provides a reliable means to visualize the joints in rocks,which can be used to verify the reliability of photogrammetry techniques.The application of the photogrammetry-based sample enables detailed analysis for estimating the mechanical properties of jointed rocks.展开更多
Objective: Computerized tomography (CT) plays an important role in the diagnosis of diseases of biliary tract. Recently, three dimensions (3D) spiral CT imaging has been used in surgical diseases gradually. This study...Objective: Computerized tomography (CT) plays an important role in the diagnosis of diseases of biliary tract. Recently, three dimensions (3D) spiral CT imaging has been used in surgical diseases gradually. This study was designed to evaluate the diagnostic value of 3D spiral CT imaging of cholangiopancreatic ducts on obstructive jaundice. Methods: Thirty patients with obstructive jaundice had received B-mode ultrasonography, CT, percutaneous transhepatic cholangiography (PTC) or endoscopic retrograde cholangiopancreatography (ERCP), and 3D spiral CT imaging of cholangiopancreatic ducts preoperatively. Then the diagnose accordance rate of these examinational methods were compared after operations. Results: The diagnose accordance rate of 3D spiral CT imaging of cholangiopancreatic ducts was higher than those of B-mode ultrasonography, CT, or single PTC or ERCP, which showed clear images of bile duct tree and pathological changes. As to malignant obstructive jaundice, this examinational technique could clearly display the adjacent relationship between tumor and liver tissue, biliary ducts, blood vessels, and intrahepatic metastases. Conclusion: 3D spiral CT imaging of cholangiopancreatic ducts has significant value for obstructive diseases of biliary ducts, which provides effective evidence for the feasibility of tumor-resection and surgical options.展开更多
Background CT perfusion imaging （CTP） has been proved to be a powerful functional imaging technique. This study aimed to evaluate the value of CTP in guiding biopsy of pulmonary lumps. Methods A total of 147 patient...Background CT perfusion imaging （CTP） has been proved to be a powerful functional imaging technique. This study aimed to evaluate the value of CTP in guiding biopsy of pulmonary lumps. Methods A total of 147 patients with pulmonary lumps who had CT guided biopsies were enrolled in this study from February 2005 to June 2007. The patients were assigned to 3 groups： 33 cases guided by CTP as group 1, 45 cases guided by contrast-enhanced scan of CT as group Ⅱ, and 69 cases guided by plain scan of CT as group Ⅲ. Each group was subdivided into central and peripheral types according to the location of the lumps. The achievement ratio of biopsy, the accuracy in grouping, and grading of lung cancer, and the incidence of complication were compared. Results The total achievement ratios of biopsy from group Ⅰ to Ⅲ were 100% （33/33）, 91% （41/45）, and 80% （55/69） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ （P 〈0.05）. For the central type, they were 100% （18/18）, 88% （15/17）, and 79% （11/14） respectively, and the difference was also statistically significant between group Ⅰand Ⅲ （P 〈0.05）. For the peripheral type, they were 100% （15/15）, 93% （26/28）, and 80% （44/55） respectivelies, and the difference was not statistically significant among the three groups. The total accuracies in grouping and grading of lung cancer from group Ⅰ to Ⅲ were 100% （27/27）, 91% （31/34）, and 72% （33/46） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ and between group Ⅱ and Ⅲ （P 〈0.05）. For the central type, they were 100% （16/16）, 94% （16/17）, and 70% （8/12） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ （P〈0.05）. For the peripheral type, they were 100% （11/11）, 88% （15/17）, and 72% （26/36） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ （P 〈0.05）. The total incidence of complication from group Ⅰ to Ⅲ were 15% （5/33）, 27% （12/45）, and 43% （30/69） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ （P 〈0.01）. For the central type, they were 11% （2/18）, 24% （4/17）, and 57% （8/14） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ （P 〈0.01）. For the peripheral type, they were 20% （3/15）, 29% （8/28）, and 40% （22/55） respectively, and no statistically significant difference was found among the three groups. Conclusions CTP guided biopsy of pulmonary lumps using multi-detector row CT has the potential to improve the accuracy of histopathological diagnosis with a lower risk and higher achievement ratio. More research and technical improvements are needed before it is widelv used.展开更多
It is an active research area to reconstruct 3-D object and display its visible surfacesfrom cross-sectional images. In this paper, the methods of reconstructing 3-D object from medicalCT images and displaying the vis...It is an active research area to reconstruct 3-D object and display its visible surfacesfrom cross-sectional images. In this paper, the methods of reconstructing 3-D object from medicalCT images and displaying the visible surfaces are discussed. A polygon approximation methodthat forms polygon with the same number of segment points and a fast interpolation method forcross-sectional contours are presented at first. Then the voxel set of a human liver is reconstructed.And then the liver voxel set is displayed using depth and gradient shading methods. The softwareis written in C programming language at a microcomputer image processing system with a PC/ATcomputer as the host and a PC-VISION board as the image processing unit. The result of theprocessing is satisfying.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.42277150,41977219)Henan Provincial Science and Technology Research Project(Grant No.222102320271).
文摘The geometry of joints has a significant influence on the mechanical properties of rocks.To simplify the curved joint shapes in rocks,the joint shape is usually treated as straight lines or planes in most laboratory experiments and numerical simulations.In this study,the computerized tomography (CT) scanning and photogrammetry were employed to obtain the internal and surface joint structures of a limestone sample,respectively.To describe the joint geometry,the edge detection algorithms and a three-dimensional (3D) matrix mapping method were applied to reconstruct CT-based and photogrammetry-based jointed rock models.For comparison tests,the numerical uniaxial compression tests were conducted on an intact rock sample and a sample with a joint simplified to a plane using the parallel computing method.The results indicate that the mechanical characteristics and failure process of jointed rocks are significantly affected by the geometry of joints.The presence of joints reduces the uniaxial compressive strength (UCS),elastic modulus,and released acoustic emission (AE) energy of rocks by 37%–67%,21%–24%,and 52%–90%,respectively.Compared to the simplified joint sample,the proposed photogrammetry-based numerical model makes the most of the limited geometry information of joints.The UCS,accumulative released AE energy,and elastic modulus of the photogrammetry-based sample were found to be very close to those of the CT-based sample.The UCS value of the simplified joint sample (i.e.38.5 MPa) is much lower than that of the CT-based sample (i.e.72.3 MPa).Additionally,the accumulative released AE energy observed in the simplified joint sample is 3.899 times lower than that observed in the CT-based sample.CT scanning provides a reliable means to visualize the joints in rocks,which can be used to verify the reliability of photogrammetry techniques.The application of the photogrammetry-based sample enables detailed analysis for estimating the mechanical properties of jointed rocks.
基金Supported by a grant of Jiangxi Province Scientific Technologic Foundation (No. E990611)
文摘Objective: Computerized tomography (CT) plays an important role in the diagnosis of diseases of biliary tract. Recently, three dimensions (3D) spiral CT imaging has been used in surgical diseases gradually. This study was designed to evaluate the diagnostic value of 3D spiral CT imaging of cholangiopancreatic ducts on obstructive jaundice. Methods: Thirty patients with obstructive jaundice had received B-mode ultrasonography, CT, percutaneous transhepatic cholangiography (PTC) or endoscopic retrograde cholangiopancreatography (ERCP), and 3D spiral CT imaging of cholangiopancreatic ducts preoperatively. Then the diagnose accordance rate of these examinational methods were compared after operations. Results: The diagnose accordance rate of 3D spiral CT imaging of cholangiopancreatic ducts was higher than those of B-mode ultrasonography, CT, or single PTC or ERCP, which showed clear images of bile duct tree and pathological changes. As to malignant obstructive jaundice, this examinational technique could clearly display the adjacent relationship between tumor and liver tissue, biliary ducts, blood vessels, and intrahepatic metastases. Conclusion: 3D spiral CT imaging of cholangiopancreatic ducts has significant value for obstructive diseases of biliary ducts, which provides effective evidence for the feasibility of tumor-resection and surgical options.
文摘Background CT perfusion imaging （CTP） has been proved to be a powerful functional imaging technique. This study aimed to evaluate the value of CTP in guiding biopsy of pulmonary lumps. Methods A total of 147 patients with pulmonary lumps who had CT guided biopsies were enrolled in this study from February 2005 to June 2007. The patients were assigned to 3 groups： 33 cases guided by CTP as group 1, 45 cases guided by contrast-enhanced scan of CT as group Ⅱ, and 69 cases guided by plain scan of CT as group Ⅲ. Each group was subdivided into central and peripheral types according to the location of the lumps. The achievement ratio of biopsy, the accuracy in grouping, and grading of lung cancer, and the incidence of complication were compared. Results The total achievement ratios of biopsy from group Ⅰ to Ⅲ were 100% （33/33）, 91% （41/45）, and 80% （55/69） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ （P 〈0.05）. For the central type, they were 100% （18/18）, 88% （15/17）, and 79% （11/14） respectively, and the difference was also statistically significant between group Ⅰand Ⅲ （P 〈0.05）. For the peripheral type, they were 100% （15/15）, 93% （26/28）, and 80% （44/55） respectivelies, and the difference was not statistically significant among the three groups. The total accuracies in grouping and grading of lung cancer from group Ⅰ to Ⅲ were 100% （27/27）, 91% （31/34）, and 72% （33/46） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ and between group Ⅱ and Ⅲ （P 〈0.05）. For the central type, they were 100% （16/16）, 94% （16/17）, and 70% （8/12） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ （P〈0.05）. For the peripheral type, they were 100% （11/11）, 88% （15/17）, and 72% （26/36） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ （P 〈0.05）. The total incidence of complication from group Ⅰ to Ⅲ were 15% （5/33）, 27% （12/45）, and 43% （30/69） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ （P 〈0.01）. For the central type, they were 11% （2/18）, 24% （4/17）, and 57% （8/14） respectively, and the difference was statistically significant between group Ⅰ and Ⅲ （P 〈0.01）. For the peripheral type, they were 20% （3/15）, 29% （8/28）, and 40% （22/55） respectively, and no statistically significant difference was found among the three groups. Conclusions CTP guided biopsy of pulmonary lumps using multi-detector row CT has the potential to improve the accuracy of histopathological diagnosis with a lower risk and higher achievement ratio. More research and technical improvements are needed before it is widelv used.
文摘It is an active research area to reconstruct 3-D object and display its visible surfacesfrom cross-sectional images. In this paper, the methods of reconstructing 3-D object from medicalCT images and displaying the visible surfaces are discussed. A polygon approximation methodthat forms polygon with the same number of segment points and a fast interpolation method forcross-sectional contours are presented at first. Then the voxel set of a human liver is reconstructed.And then the liver voxel set is displayed using depth and gradient shading methods. The softwareis written in C programming language at a microcomputer image processing system with a PC/ATcomputer as the host and a PC-VISION board as the image processing unit. The result of theprocessing is satisfying.
