Finite Element Analysis Study of Box Culvert Jacking-Out Construction under Existing Railway Line

To shorten the existing box culvert demolition construction period and ensure the normal operation of the railway, the jacking-out construction method was adopted. The ABAQUS finite element software was used to establish a three-dimensional model of the box culvert and soil body of the relying project, and three excavation thickness (0m, 1 m, 2 m) were used as the main variation parameters for numerical analysis and research, and the change law of the box culvert itself and soil body stress during the culvert jacking out process was obtained. The results show that the jacking force-displacement curves of the three working conditions can be divided into two stages, and the jacking force reaches the maximum value at the moment when the static friction turns into sliding friction at the end of the first stage. The stress distribution at the bottom slab of the box culvert in the jacking process is approximately normal, and the stress decreases with the increase of the roadbed excavation thickness. The increase of the roadbed excavation thickness can reduce the soil pressure on the side of the box culvert and effectively reduce the deformation of the roadbed in the jacking-out process. The deformation of the roadbed during the jacking process can be reduced by increasing the thickness of the roadbed excavation.

Utility Impact below Bridge or Culvert Soffit on Open Channel Flow

The background to this research was a flooding incident that occurred in Bridgend, Co. Donegal, Ireland in August 2017. While several properties were flooded, a flooding case study of a single dwelling house adjacent to the Bridgend River at Riverdale, Bunamayne, Co. Donegal, Ireland is used herein. For this study the flooded site shall be referred to as the “Hegarty property”. A structure in the form of a stone arched culvert is located directly adjacent to the two-storey detached dwelling house on the Hegarty Property. While the culvert is referred to locally as a bridge, within this research the word culvert will be used in connection with the structure. The culvert has a concrete surrounded utility (watermain) crossing at a gradient below the culvert soffit on the upstream face of the structure. The utility obstructed flow through the culvert and contributed to the flooding event. Given the implication of climate change and the increased probability of more extreme flooding events, it was decided to explore the case study to ascertain the factors that contribute to flooding events when utilities are positioned at culvert or bridge structures. This work was completed to assist undergraduate students, researchers, and local authorities in a relatively unknown area of flood causation.

Design and Construction Technology of Prefabricated Reinforced Concrete Slab Culverts

Compared with traditional cast-in-situ concrete slab culverts,prefabricated reinforced concrete slab culverts can be produced more quickly and has strong quality controllability,strong earthquake resistance,and repeatability.They will be the primary production method of slab culverts in the future.This article offers a comprehensive review of the design and construction technology associated with prefabricated reinforced concrete slab culverts.The objective is to provide a valuable reference for related enterprises,enhance the quality of design and construction in precast pile configuration,and,in turn,contribute to the advancement of construction projects within our country.

The effects of water flow and temperature on thermal regime around a culvert built on permafrost

Temperature and water flow through a culvert beneath the Alaska Highway near Beaver Creek,Yukon,were measured at hourly intervals between June and October 2013.These data were used to simulate the effect of the culvert on the thermal regime of the road embankment and subjacent permafrost.A 2-D thermal model of the embankment and permafrost was developed with TEMP/W and calibrated using field observations.Empirical relations were obtained between water temperatures at the entrance to the culvert,flow into the culvert,and water temperatures inside the structure.Water temperatures at the entrance and inside the culvert had a linear relation,while water temperatures inside the culvert and water flow were associated by a logarithmic relation.A multiple linear regression was used to summarize these relations.From this relationship,changes in the flow rate and water temperatures at the entrance of the culvert were simulated to obtain predicted water temperatures in the culvert.The temperatures in the culvert were used in the thermal model to determine their effects on the ground thermal regime near the culvert.Variation of ±10% in water flow rate had no impact on the thermal regime underneath the culvert.Variation of water temperature at the entrance of the culvert had a noticeable influence on the thermal regime.A final simulation was conducted without insulation beneath the culvert.The thaw depth was 30 cm with insulation,and 120 cm without insulation,illustrating the importance of insulation to the ground thermal regime.

Frost heave analysis of ballasted track above box culvert and its influence on train vibration

The uneven frost heave of frost-susceptible subgrade soil causes track irregularity,which highly enhances train vibration and affects the comfort and safety of railway transportation.This paper presents a coupled thermo-hydro-mechanical(THM)analysis for the freezing behavior of railway located above a box culvert.The vertical acceleration of the vehicle,an indicator of riding comfort,is predicted through a vehicle dynamic model.The results reveal that the existence of a box culvert changes the subgrade thermal pattern,leading to a deeper frost penetration depth.The frost heave amount above the box culvert is larger than the adjacent section,resulting in uneven track structure upheave and track irregularity.This frostinduced track irregularity highly affects train vibration.

The Collapse of Culverts-Arch in Several Cities around the World, Technical Arguments for Their Maintenance and a Legal Proposal for Prohibiting Their Construction in Mexico

Construction underground pipes and underground culvertsarch (UCA) in order to transport the flow natural rivers and city’s sewage at the same time, is a practice that should be prohibited by the Mexico National Water Law (NWL). When UCA collapse, it causes severe damage to surrounding infrastructure, public and private property, and puts citizens’ lives at risk. This work presents some examples of UCA collapse incidents in several cities around the world, emphasizes how important preventive maintenance of these structures is, highlights the need to classify risk areas, and stresses the need to formulate norms and civil defense plans as article 83 of the NWL suggests. We also propose an addition to Fraction I, article 100 of the National Water Law, to protect the animal and plant life of its banks and safety of their natural runoff.

Relative Depth Effects on Corrugated Culvert Roughness

Fish passage is important to the overall health of an ecosystem. Therefore, it is important to be able to accurately predict flow conditions within a stream crossing for high and low flow periods. This paper evaluates the effect of relative water depth on the hydraulic roughness of culverts at low discharge. A 21 m long, 0.8 m diameter corrugated steel pipe with 0.068 × 0.013 m annular corrugations was used. For relative depths below 0.5, Manning’s n was found to increase with decreasing relative depth. An equation was developed to predict relative depths below 0.5 within a corrugated steel pipe based on the corrugation height, slope and culvert diameter. While Manning’s equation does perform reasonably well, the percent difference from the measured to predicted water levels warrants the use of an additional prediction method at low flows.

Origin of Erosion and Hydraulic Problems of the San Roque Underground Arched Culvert Channel and Its Relationship with the Maximum Flow Rate and the Maximum Permissible Velocity

This work presents the hydrologic estimations of the hydraulic underground arched culvert channel (UACC) in Sabinal Basin, Chiapas, México and the hydrological problems associated with it, such as the erosion phenomenon and abrasion cavity formation in it. On the other hand, the maximum flows that the UACC could transport were analyzed, concluding that it no longer has the hydraulic capacity to transport the flow rate associated to return periods equal to or greater than five years and that maximum permissible velocity UACC’s bottom is 3 m/s.

Seismic Performance Assessment of Reinforced Concrete Box Culverts under Near and Far Fault Seismic Ground Motion Records

Studying the critical response characteristics of reinforced concrete box culverts with diverse geometrical configurations under seismic excitations is a necessary step to develop a reasonable design method. In this work, numerical analysis and assessment of reinforced concrete box culverts for seismic loading in addition to standard static loading from dead and live loads is conducted, aiming to highlight the critical difference in the seismic performances between two and three cell box culverts under near and far-fault ground motion. The results show how and where the seismic loading alters the responses of seismic loading of the models including the effect on safety and failure. The geometrical configurations of the culvert combined with the loading scenarios also significantly influence the magnitude and distribution of the seismic responses. The findings of this work shed light on the critical role of the geometrical configurations and shaking event in the seismic responses of reinforced concrete box culverts and this procedure can be applied as seismic assessment method to any culvert shape, size, and material.

Research on 3D visualization design system of hydraulic culvert

The conventional 2D design method of culverts separated from 3D model cannot directly visualize the process of creating and renewal process. This paper explores graphics application framework of Open GL based on MFC, developing the 3D visualization system of hydraulic culvert. This system effectively integrats with building design, structural design and parametric design and image processing technology. The results can be shown by 3D visualization design.

Study on dynamic response of embedded long span corrugated steel culverts using scaled model shaking table tests and numerical analyses

A series of scaled-model shaking table tests and its simulation analyses using dynamic finite element method were performed to clarify the dynamic behaviors and the seismic stability of embedded corrugated steel culverts due to strong earth-quakes like the 1995 Hyogoken-nanbu earthquake. The dynamic strains of the embedded culvert models and the seismic soil pressure acting on the models due to sinusoidal and random strong motions were investigated. This study verified that the cor-rugated culvert model was subjected to dynamic horizontal forces (lateral seismic soil pressure) from the surrounding ground, which caused the large bending strains on the structure; and that the structures do not exceed the allowable plastic deformation and do not collapse completely during strong earthquake like Hyogoken-nanbu earthquake. The results obtained are useful for design and construction of embedded long span corrugated steel culverts in seismic regions.

Centrifugal model test and numerical simulation of vertical earth pressure on soft foundation box culvert

To obtain the vertical earth pressure on a soft foundation box culvert and investigate the interaction of the soil-culvert-foundation system, both a centrifugal model test and a numerical simulation were conducted and the comparisons with the current methods to determine the load on a culvert were completed. The results of the model test and numerical analysis are in satisfactory agreement, which shows that the direction of the shear stress between the culvert and the adjacent embankment depends on the differential settlement between them. A vertical earth pressure concentration appears on the culvert with a rigid piles foundation because of a downward shear stress. The ratio of the load on a soft foundation culvert and the overburden pressure above the culvert raises first and then decreases as the backfill height increases. In order to reduce the load on a culvert, it is suggested to limit the stiffness difference of the foundations under the culvert and embankment and to use a light backfill over the culvert.

Safety assessment for buried drainage box culvert under influence of underground connected aisle blasting:A case study

Blasting engineering in complex urban environments is considered to influence the safety and stability of the overlying drainage box culvert structure owing to vibration.Therefore,field blasting and vibration tests were performed on the blasting engineering of the Wuhan Metro Line 8 connected aisle,and the LS-DYNA software was used to analyze the dynamic response characteristics of an underground drainage box culvert during the blasting test.The vibration response evolution law of the buried drainage box culvert under blasting vibration was investigated,and a safe surface control standard for the blast vibration of a drainage box culvert is proposed.The results reveal that the maximum tensile stress of the box culvert structure was 0.33 MPa.The peak particle velocity(PPV)and peak tensile stress(PTS)of the drainage box culvert decreased as the water level in the box culvert increased.Based on the relationship between the tensile stress of the box culvert,PPV of the box culvert,and PPV of the surface,it is proposed that the surface control velocity of the buried drainage box culvert is 1.36 cm/s.

高填方大直径钢波纹管涵变形机制与控制技术研究

目的 研究高填方大直径钢波纹管涵变形机制与控制技术,解决其结构变形过大的问题。方法 基于管道压缩变形公式,提出在管涵两侧一定范围内填筑水泥土材料的新技术;通过室内试验确定水泥土材料中最优水泥质量分数,再基于数值模拟和现场试验分析采用新技术施工的管涵结构的受力及变形特征及其上部竖向土压力分布规律,确定最优管侧填筑范围。结果 新填筑技术能充分利用水泥土的刚度限制管涵的变形,当管涵两侧2/3管径范围内采用水泥质量分数为8%水泥土回填时,管涵的最大竖向及水平变形分别减少了35.1%和55.0%,结构最大应力也由管顶处转移至管涵上部45°附近,受力更为合理。结论 新填筑技术使管涵更好地与周围土体逐步变形协调,产生荷载重分布形成土拱效应,将管顶土压力由管中心向管边缘处转移,有效减小了钢波纹管涵结构变形和应力集中。

波纹钢形状与拱效应对加固盖板涵承载力的影响

为了探索波纹钢形状对加固盖板涵承载力的影响及填充混凝土的拱效应形成机制,采用室内试验与数值分析相结合的研究方法,以一个室内模型试验结果为基准,建立了72个箱形、圆弧及其之间的过渡形状的波纹钢加固盖板涵的数值模型,探明了加固体系承载力随波纹钢形状参数的变化规律;基于合理拱轴的概念,探明了填充混凝土的拱效应形成机理,并采用5个数值模型进行了验证。结果表明:拱腋半径保持不变时,加固体系的承载力随着拱顶、侧墙半径的增加而减小;拱顶、侧墙半径不变时,加固体系的承载力随着拱腋半径的增加而增大;提升加固体系承载力最有效的方式是增加拱腋半径,其次是减小拱顶和侧墙半径;填充混凝土的拱效应与荷载类型有关,当波纹钢的形状能保持拱轴连续并且在素混凝土刚性角以内时,加固体系的承载力最高。在设计波纹钢加固盖板涵结构时,应根据实际工程需要综合考虑波纹钢形状与填充混凝土的拱效应,尽量避免紧贴原盖板涵的加固设计。

黄河下游灌区引黄涵闸引水能力变化原因分析

黄河下游引黄涵闸受河床下切、河势变化等因素共同影响,引水条件与设计情况相比发生了变化,造成部分河段涵闸引水困难,影响农业适时灌溉和生产。为给应对引黄涵闸引水能力下降问题提供参考,基于黄河下游2000—2016年引黄涵闸引水水位和河道断面实测数据,分析引黄涵闸引水水位变化、河槽冲刷、引黄渠道淤积变化等因素对引黄涵闸引水能力产生的影响。结果表明:1)2016年黄河来水300~900 m^(3)/s时,黄河下游引黄涵闸实际引水能力仅为设计引水能力的13.63%~39.43%,引黄涵闸引水能力明显下降;2)相较2000年,2016年的引黄涵闸设计值对应黄河流量的水位,高村以上河段下降了2.95~3.35 m,高村以下河段下降了1.55~2.95 m;3)从河段河床平均冲刷厚度看,花园口—夹河滩、夹河滩—高村、高村—孙口、孙口—艾山、艾山—泺口、泺口—利津河段的冲刷厚度分别为3.88、3.06、1.84、1.88、1.88、2.02 m,河槽连续冲刷导致同流量水位明显降低,严重影响河南和山东段引黄涵闸正常引水;4)涵闸前后引、输水渠道淤积会导致引黄涵闸引水能力降低。

稳态渗流下非饱和土涵洞竖向土压力的迭代解与简化

为描述稳态渗流下不同类别非饱和土涵洞的竖向土压力变化,应用圆弧小主应力轨迹法和Mohr应力圆获得考虑土拱效应的滑移面土压力系数,继而基于非饱和土的有效应力强度公式与吸应力理论,由水平薄层单元的竖向力平衡分别建立稳态渗流下上埋式/沟埋式非饱和土涵洞竖向土压力的迭代解,给出应用步骤并开展对比验证与方法拓展,最后结合吸应力沿深度分布规律提出涵洞竖向土压力的简化实用公式。研究结果表明:涵洞竖向土压力迭代解能合理反映土体类别、水分蒸发、降雨入渗和土拱效应的综合影响,并得到文献现场实测和理论公式数据的正确性验证以及对非饱和土涵洞的适用性;涵洞竖向土压力实用公式可显式表达且精度良好,方便估算不同稳态渗流下涵洞主要荷载;砂土涵洞可忽略非饱和特性影响而按饱和土计算竖向土压力,粉土和黏土涵洞可简化吸应力沿深度为线性分布;上埋式涵洞土拱负效应使得竖向土压力增大,而沟埋式涵洞土拱正效应使得竖向土压力减小。

城市排水泵站水力特性及整流措施

为了解弧形进水箱涵城市排水泵站水力特性,探寻改善泵站内部不良流态的整流措施,采用数值模拟方法对城市排水泵站水力流态及整流措施进行研究,并通过物理模型对整流效果进行验证。研究结果表明:弧形进水箱涵城市排水泵站的前池存在主流偏斜与分离流动现象,前池主流集中在中上层,中下层出现大范围的立面环流,底层存在回流,进水池内流态紊乱并出现旋涡,导致水泵进水不够顺畅;设计优化的“方形立柱+组合横梁”的组合式整流措施能够改善前池和进水池的水力流态,前池内的偏流和分离流动消除,底层回流消失,进水池旋涡得到有效抑制,3台水泵进水流道入口流速分布均匀度分别提升了12.0%、8.7%、8.3%,入流速度加权平均角分别提升了7.08°、9.07°、11.40°。