The First Discovery of Sulfide Inclusions within Apatite from Hornblende Cumulated Crystals

Objective Sulfide inclusions within natural mineral phases play important roles in exploring the origin of magmatic sulfides ores,tracing the distribution of sulfur in mantle or crust and understanding continental mantle evolution（partial melting and metasomatism in upper mantle）.Until now,varieties of sulfide inclusions have been extensively discovered in the ultramafic or mafic phenocrysts.

Petrology and geochemistry of mafic and ultramafic cumulate rocks from the eastern part of the Sabzevar ophiolite(NE Iran): Implications for their petrogenesis and tectonic setting

The Late Cretaceous Sabzevar ophiolite represents one of the largest and most complete fragments of Tethyan oceanic lithosphere in the NE Iran.It is mainly composed of serpentinized mantle peridotites slices;nonetheless,minor tectonic slices of all crustal sequence constituents are observed in this ophiolite.The crustal sequence contains a well-developed ultramafic and mafic cumulates section,comprising plagioclase-bearing wehrlite,olivine clinopyroxenite,olivine gabbronorite,gabbronorite,amphibole gabbronorite and quartz gabbronorite with adcumulate,mesocumulate,heteradcumulate and orthocumulate textures.The crystallization order for these rocks is olivine±chromian spinel→clinopyroxene→plagioclase→orthopyroxene→amphibole.The presence of primary magmatic amphiboles in the cumulate rocks shows that the parent magma evolved under hydrous conditions.Geochemically,the studied rock units are characterized by low TiO2(0.18-0.57 wt.%),P2 O5(<0.05 wt.%),K2 O(0.01-0.51 wt.%)and total alkali contents(0.12-3.04 wt.%).They indicate fractionated trends in the chondrite-normalized rare earth element(REE)plots and multi-element diagrams(spider diagrams).The general trend of the spider diagrams exhibit slight enrichment in large ion lithophile elements(LILEs)relative to high field strength elements(HFSEs)and positive anomalies in Sr,Pb and Eu and negative anomalies in Zr and Nb relative to the adjacent elements.The REE plots of these rocks display increasing trend from La to Sm,positive Eu anomaly(Eu/Eu*=1.06-1.54)and an almost flat pattern from medium REE(MREE)to heavy REE(HREE)region[(Gd/Yb)N=1-1.17].Moreover,clinopyroxenes from the cumulate rocks have low REE contents and show marked depletion in light REE(LREE)compared to MREE and HREE[(La/Sm)N=0.10-0.27 and(La/Yb)N=0.08-0.22].The composition of calculated melts in equilibrium with the clinopyroxenes from less evolved cumulate samples are closely similar to island arc tholeiitic(IAT)magmas.Modal mineralogy,geochemical features and REE modeling indicate that Sabzevar cumulate rocks were formed by crystal accumulation from a hydrous depleted basaltic melt with IAT affinity.This melt has been produced by moderate to high degree(~15%)of partial melting a depleted mantle source,which partially underwent metasomatic enrichment from subducted slab components in an intra-oceanic arc setting.

Petrology of ultramafic to mafic cumulate rocks from the G?ksun(Kahramanmaras) ophiolite,southeast Turkey

The G?ksun(Kahramanmaras)ophiolite(GKO),cropping out in a tectonic window bounded by the Malatya metamorphic unit on both the north and south,is located in the EW-trending lower nappe zone of the southeast Anatolian orogenic belt(Turkey).It exhibits a complete oceanic lithospheric section and overlies the Middle Eocene Maden Group/Complex with a tectonic contact at its base.The ophiolitic rocks and the tectonically overlying Malatya metamorphic(continental)unit were intruded by I-type calc-alkaline Late Cretaceous granitoid(~81-84 Ma).The ultramafic to cumulates in the GKO are represented by wehrlite,plagioclase wehrlite,olivine gabbro and gabbro.The crystallization order for the cumulate rocks is as follows:olivine±chromian spinel→clinopyroxene→plagioclase.The major and trace element geochemistry as well as the mineral chemistry of the ultramafic to mafic cumulate rocks suggest that the primary magma generating the GKO is compositionally similar to that observed in the modern island-arc tholeiitic sequences.The mineral chemistry of the ultramafic to mafic cumulates indicates that they were derived from a mantle source that was previously depleted by earlier partial melting events.The highly magnesian olivine(Fo77-83),clinopyroxene(Mg#of 82-90)and the highly Ca-plagioclase(An81-89)exhibit a close similarity to those,which formed in a supra-subduction zone(SSZ)setting.The field and the geochemical evidence suggest that the GKO formed as part of a much larger sheet of oceanic lithosphere,which accreted to the base of the Tauride active continental margin,including the ispendere,K?mürhan and the Guleman ophiolites.The latter were contemporaneous and genetically/tectonically related within the same SSZ setting during the closure of the Neotethyan oceanic basin(Berit Ocean)between the Taurides to the north and the Bitlis-Pütürge massif to the south during the Late Cretaceous.

Late Triassic Intraoceanic Arc Aystem within Neotethys: Evidence from Cumulate Hornblende Gabbro in Gangdese Belt, South Tibet

The Neotethys plays an important role in shaping the Gangdese magmatic belt,southern Tibet.However,the initial time of spreading and subduction of the Neotethys remains contentious.In this study,a suite of late Triassic cumulate hornblende gabbro was identified in the southern margin of the Gangdese magmatic belt.The gabbro exhibits cumulate structure,with hornblende and plagioclase as the primary mineral phases.Isotopic data indicate a hydrous magma source derived from a depleted mantle wedge that has been modified by slab dehydration.Geochemical discriminations suggest that the gabbro was formed in an intraoceanic arc setting,with crystallization ages of ca.220-213 Ma.Hornblende,hornblendelagioclase and ilmenite thermometers reveal that the crystallization temperature of 900-750°C for the gabbro.Hornblende and hornblende-plagioclase geobarometers yield an emplacement depth at ca.14.5-19.5 km.This gabbro constitutes a line of evidence for an intraoceanic arc magmatism that is coeval with the counterparts in the southern Turkey,revealing an intraoceanic subduction system within the Neotethys from west to east in the Late Triassic and that the oceanization of the Neotethys was much earlier than previous expectation.

SHRIMP U-Pb dating and Hf isotopic analyses of Middle Ordovician meta-cumulate gabbro in central Qiangtang, northern Tibetan Plateau

Metabasites consisting of metamorphic ultra-mafic rocks, cumulate gabbro, gabbro (diabase), basalt, and plagiogranite are exposed at the Taoxinghu area in central Qiangtang, northern Tibetan Plateau. Zircon SHRIMP U-Pb dating for the cumulate gabbro yields a weighted mean age of 467±4 Ma, which is the oldest and most reliable magmatic age in this area. Zircon 176Hf/177Hf ratios range from 0.282615 to 0.282657, with εHf(t) values of 5.02±0.28, indicating that the cumulate gabbro was mainly derived from the depleted mantle. In addition, geochemical data of metabasites suggest that they have similar characteristics to those in the mid-ocean ridge basalts (MORB). The Taoxinghu metabasites may represent the fragment of Early Paleozoic ophiolite in the "Central Uplift" of the Qiangtang, northern Tibetan Plateau.

Cumulate complex xenoliths in the Early Mesozoic in eastern Inner Mongolia

Mafic xenoliths occur in Mesozoic diorites from nine localities in eastern Inner Mongolia from the Da Hinggan Mrs. to Huabei craton. Their petrologic and geochemical features suggest that they are an intact suite of cumulate complex whose mineral assemblages contain typical patent mantle metasomatism minerals such as pargosite, phlogopite and apatite. Their REEs and trace element characteristics suggest a comagmatic relationship in these cumulates with different compositions. Isotopic dating of the xenoliths indicates that they are products of the mantle magmatic underplating in the Early Mesozoic (237—224 Ma), and they may provide direct evidence for the crust-mantle interaction and vertical accretion of continental crust under a background of the mantle upwelling in the Early Mesozoic in Huabei region.

Mechanical responses of anchoring structure under triaxial cyclic loading

Dynamic load on anchoring structures(AS)within deep roadways can result in cumulative damage and failure.This study develops an experimental device designed to test AS under triaxial loads.The device enables the investigation of the mechanical response,failure mode,instability assessment criteria,and anchorage effect of AS subjected to combined cyclic dynamic-static triaxial stress paths.The results show that the peak bearing strength is positively correlated with the anchoring matrix strength,anchorage length,and edgewise compressive strength.The bearing capacity decreases significantly when the anchorage direction is severely inclined.The free face failure modes are typically transverse cracking,concave fracturing,V-shaped slipping and detachment,and spallation detachment.Besides,when the anchoring matrix strength and the anchorage length decrease while the edgewise compressive strength,loading rate,and anchorage inclination angle increase,the failure intensity rises.Instability is determined by a negative tangent modulus of the displacement-strength curve or the continued deformation increase against the general downward trend.Under cyclic loads,the driving force that breaks the rock mass along the normal vector and the rigidity of the AS are the two factors that determine roadway stability.Finally,a control measure for surrounding rock stability is proposed to reduce the internal driving force via a pressure relief method and improve the rigidity of the AS by full-length anchorage and grouting modification.

Non-Gaussianity detection of single-mode rotationally symmetric quantum states via cumulant method

The non-Gaussianity of quantum states incarnates an important resource for improving the performance of continuous-variable quantum information protocols.We propose a novel criterion of non-Gaussianity for single-mode rotationally symmetric quantum states via the squared Frobenius norm of higher-order cumulant matrix for the quadrature distribution function.As an application,we study the non-Gaussianities of three classes of single-mode symmetric non-Gaussian states:a mixture of vacuum and Fock states,single-photon added thermal states,and even/odd Schr¨odinger cat states.It is shown that such a criterion is faithful and effective for revealing non-Gaussianity.We further extend this criterion to two cases of symmetric multi-mode non-Gaussian states and non-symmetric single-mode non-Gaussian states.

Fatigue Crack Propagation Law of Corroded Steel Box Girders in Long Span Bridges

In order to investigate the fatigue performance of orthotropic anisotropic steel bridge decks,this study realizes the simulation of the welding process through elastic-plastic finite element theory,thermal-structural sequential coupling,and the birth-death element method.The simulated welding residual stresses are introduced into the multiscale finite element model of the bridge as the initial stress.Furthermore,the study explores the impact of residual stress on crack propagation in the fatigue-vulnerable components of the corroded steel box girder.The results indicate that fatigue cracks at the weld toe of the top deck,the weld root of the top deck,and the opening of the transverse diaphragm will not propagate under the action of a standard vehicle load.However,the inclusion of residual stress leads to the propagation of these cracks.When considering residual stress,the fatigue crack propagation paths at the weld toe of the transverse diaphragm and the U-rib weld toe align with those observed in actual bridges.In the absence of residual stress,the cracks at the toe of the transverse diaphragm with a 15%mass loss rate are categorized as type I cracks.Conversely,when residual stress is considered,these cracks become I-II composite cracks.Residual stress significantly alters the cumulative energy release rate of the three fracturemodes.Therefore,incorporating the influence of residual stress is essential when assessing the fatigue performance of corroded steel box girders in long-span bridges.

Wigner function of optical cumulant operator and its dissipation in thermo-entangled state representation

To conveniently calculate the Wigner function of the optical cumulant operator and its dissipation evolution in a thermal environment, in this paper, the thermo-entangled state representation is introduced to derive the general evolution formula of the Wigner function, and its relation to Weyl correspondence is also discussed. The method of integration within the ordered product of operators is essential to our discussion.

Spatiotemporal changes of gross primary productivity and its response to drought in the Mongolian Plateau under climate change

Gross primary productivity(GPP)of vegetation is an important constituent of the terrestrial carbon sinks and is significantly influenced by drought.Understanding the impact of droughts on different types of vegetation GPP provides insight into the spatiotemporal variation of terrestrial carbon sinks,aiding efforts to mitigate the detrimental effects of climate change.In this study,we utilized the precipitation and temperature data from the Climatic Research Unit,the standardized precipitation evapotranspiration index(SPEI),the standardized precipitation index(SPI),and the simulated vegetation GPP using the eddy covariance-light use efficiency(EC-LUE)model to analyze the spatiotemporal change of GPP and its response to different drought indices in the Mongolian Plateau during 1982-2018.The main findings indicated that vegetation GPP decreased in 50.53% of the plateau,mainly in its northern and northeastern parts,while it increased in the remaining 49.47%area.Specifically,meadow steppe(78.92%)and deciduous forest(79.46%)witnessed a significant decrease in vegetation GPP,while alpine steppe(75.08%),cropland(76.27%),and sandy vegetation(87.88%)recovered well.Warming aridification areas accounted for 71.39% of the affected areas,while 28.53% of the areas underwent severe aridification,mainly located in the south and central regions.Notably,the warming aridification areas of desert steppe(92.68%)and sandy vegetation(90.24%)were significant.Climate warming was found to amplify the sensitivity of coniferous forest,deciduous forest,meadow steppe,and alpine steppe GPP to drought.Additionally,the drought sensitivity of vegetation GPP in the Mongolian Plateau gradually decreased as altitude increased.The cumulative effect of drought on vegetation GPP persisted for 3.00-8.00 months.The findings of this study will improve the understanding of how drought influences vegetation in arid and semi-arid areas.

Cumulative effects of excess high-normal alanine aminotransferase levels in relation to new-onset metabolic dysfunction-associated fatty liver disease in China

BACKGROUND Within the normal range,elevated alanine aminotransferase(ALT)levels are associated with an increased risk of metabolic dysfunction-associated fatty liver disease(MAFLD).AIM To investigate the associations between repeated high-normal ALT measurements and the risk of new-onset MAFLD prospectively.METHODS A cohort of 3553 participants followed for four consecutive health examinations over 4 years was selected.The incidence rate,cumulative times,and equally and unequally weighted cumulative effects of excess high-normal ALT levels(ehALT)were measured.Cox proportional hazards regression was used to analyse the association between the cumulative effects of ehALT and the risk of new-onset MAFLD.RESULTS A total of 83.13%of participants with MAFLD had normal ALT levels.The incidence rate of MAFLD showed a linear increasing trend in the cumulative ehALT group.Compared with those in the low-normal ALT group,the multivariate adjusted hazard ratios of the equally and unequally weighted cumulative effects of ehALT were 1.651[95%confidence interval(CI):1.199-2.273]and 1.535(95%CI:1.119-2.106)in the third quartile and 1.616(95%CI:1.162-2.246)and 1.580(95%CI:1.155-2.162)in the fourth quartile,respectively.CONCLUSION Most participants with MAFLD had normal ALT levels.Long-term high-normal ALT levels were associated with a cumulative increased risk of new-onset MAFLD.

The Cumulative Method for Multiplication and Division

This paper provides a method of the process of computation called the cumulative method, it is based upon repeated cumulative process. The cumulative method is being adapted to the purposes of computation, particularly multiplication and division. The operations of multiplication and division are represented by algebraic formulas. An advantage of the method is that the cumulative process can be performed on decimal numbers. The present paper aims to establish a basic and useful formula valid for the two fundamental arithmetic operations of multiplication and division. The new cumulative method proved to be more flexible and made it possible to extend the multiplication and division based on repeated addition/subtraction to decimal numbers.

Ecological risk assessment and early warning of heavy metal cumulation in the soils near the Luanchuan molybdenum polymetallic mine concentration area,Henan Province,central China

The Luanchuan molybdenum polymetallic mine concentration area is rich in mineral resources and has a long history of mining.The environmental impact of long-term mining activities cannot be ignored.It is of great significance to study the ecological risk and the accumulation trends of heavy metals in the soil of mining areas for scientific prevention and control of heavy metal pollution.Taking the Taowanbeigou River Basin in the mine concentration area as the research object,the ecological pollution risk and cumulative effect of heavy metals in the soil of the basin were studied by using the comprehensive pollution index method,potential ecological risk assessment method and geoaccumulation index method.On this basis,the cumulative exceeding years of specific heavy metals were predicted by using the early warning model.The comprehensive potential ecological risk of heavy metals in the soil near the Luanchuan mine concentration area is moderate,and the single element Cd is the main ecological risk factor,with a contribution rate of 53.6%.The overall cumulative degrees of Cu and Pb in the soil are“none-moderate”,Zn and Cd are moderate,Mo has reached an extremely strong cumulative level,Hg,As and Cr risks are not obvious,and the overall cumulative risks order is Mo>Cd>Zn>Cu>Pb>Hg.According to the current accumulation rate and taking the risk screening values for soil contamination of agricultural land as the reference standard,the locations over standard rates of Cu,Zn and Cd will exceed 78%in 90years,and the over standard rate of Pb will reach approximately 57%in 200 years.The cumulative exceeding standard periods of As,Cr and Hg are generally long,which basically indicates that these elements do not pose a significant potential threat to the ecological environment.Mining activities will accelerate the accumulation of heavy metals in soil.With the continuous development of mining activities,the potential pollution risk of heavy metals in the soil of mining areas will also increase.

Rational screening of metal coating on Zn anode for ultrahigh-cumulative-capacity aqueous zinc metal batteries

Aqueous zinc metal batteries feature intrinsic safety,but suffer from severe dendrite growth and water-derived side reactions.Many metal coatings have been explored for stabilizing Zn metal anode via a trialand-error approach.Here,we propose an exercisable way to screen the potential metal coating on Zn anodes in view of de-polarization effect and dendrite-suppressing ability theoretically.As an output of this screening,cadmium(Cd) metal is checked experimentally.Therefore,symmetric ZnllZn cells using Cd coated Zn(Zn@Cd) exhibit an ultra-long cycle life of 3500 h(nearly 5 months) at a high current density of 10 mA cm^(-2),achieving a record-high cumulative capacity(35 A h cm^(-2)) compared to the previous reports.The full cells of Zn@Cd‖MnO_(2) display a markedly improved cycling performance under harsh conditions including a limited Zn supply(N/P ratio=1.7) and a high areal capacity(3.5 mA h cm^(-2)).The significance of this work lies in not only the first report of Cd coating for stabilizing Zn metal anode,but also a feasible way to screen the promising metal materials for other metal anodes.

Developing Weibull-based diameter distributions for the major coniferous species in Heilongjiang Province,China

Diameter distribution models play an important role in forest inventories,growth prediction,and management.The Weibull probability density function is widely used in forestry.Although a number of methods have been proposed to predict or recover the Weibull distribution,their applicability and predictive performance for the major tree species of China remain to be determined.Trees in sample plots of three even-aged coniferous species(Larix olgensis,Pinus sylvestris and Pinus koraiensis)were measured both in un-thinned and thinned stands to develop parameter prediction models for the Weibull probability density function.Ordinary least squares(OLS)and maximum likelihood regression(MLER),as well as cumulative distribution function regression(CDFR)were used,and their performance compared.The results show that MLER and CDFR were better than OLS in predicting diameter distributions of tree plantations.CDFR produced the best results in terms of fitting statistics.Based on the error statistics calculated for different age groups,CDFR was considered the most suitable method for developing prediction models for Weibull parameters in coniferous plantations.

Association ofβ-lactam antimicrobial's exposure with carbapenem-resistant Pseudomonas aeruginosa infection:a cumulative meta-analysis

Background:Carbapenems are effective against severe Pseudomonas aeruginosa nosocomial infections.Therefore,carbapenem-resistant Pseudomonas aeruginosa is a serious public health threat.An understanding of the risk of inappropriate exposure to different antimicrobials in resistant Pseudomonas aeruginosa infection could help in elucidating the effective approach towards using antimicrobials in vulnerable patients with CRPA infection.Object:To investigate the association between exposure ofβ-lactam antimicrobials and CRPA infection relative to control patients.Methods:The MEDLINE/PubMed and OVID/Embase databases were used to search case-control and cohort studies in English language which reported antimicrobial exposure as risk factors for CRPA infection.The pooled odds ratios(OR)were calculated using a random-effect and fixed-effect model,and forest plots from a cumulative meta-analysis method were used to better show how pooled OR changed as updated evidence accumulated.Results:A total of 24 studies comprising 7039 participants were included for cumulative meta-analysis.A positive correlation was found between development of CRPA infection and exposure of beta-lactam antimicrobials:carbapenems(OR=7.60,95%CI:3.95 to 14.62,P<0.0001),imipenem(OR=9.81,95%CI:5.56 to 17.33),ampicillin(OR=1.86,95%CI:1.14 to 2.41),piperacillin(OR=2.82,95%CI:1.46 to 2.43),penicillins(OR=1.42,95%CI:0.90 to 2.24),cephalosporins(OR=1.88,95%CI:1.46 to 2.43)andβlactamase inhibitors(OR=1.96,95%CI:1.44 to 2.67).Further,exposure of other antimicrobial agents like quinolone(OR=2.35,95%CI:1.78 to 3.10),ciprofloxacin(OR=2.35,95%CI:1.66 to 3.95),aminoglycoside(OR=2.17,95%CI:1.60 to 2.95),amikacin(OR=3.11,95%CI:2.10 to 4.61),glycopeptides(OR=3.02,95%CI:1.92 to 4.75)and vancomycin(OR=3.26,95%CI:1.48 to 7.18),were also found to be positively associated with development of CRPA infection.Conclusions:Exposure of all kinds ofβ-lactams is significantly associated with development of carbapenemresistant Pseudomonas aeruginosa infection.These findings provide an impetus to take a more active approach while usingβ-lactam antimicrobials in patients with resistant Pseudomonas aeruginosa infections.

Experimental Studies on Cyclic Shear Behavior of Steel-Clay Interface Under Constant Normal Load

The degradation of the shear stress between pile-clay interface caused by undrained cyclic jacking affects the jacking force.A series of large displacement monotonic shear,cyclic shear and post-cyclic monotonic steel plate-clay interface shear te sts were performed under the constant normal load(CNL)condition to inve stigate the effects of normal stre ss,cyclic amplitude,and number of cycles on a steel plate-clay interface using the GDS multi-function interface shear tester.Based on the experimental results,in monotonic shear tests,change of shear stress took place in the specimen,the shear stress rapidly reached the peak value at shear displacement of 1 mm,and then abruptly decreased to the residual value.In cyclic shear te sts,accumulated displacement was a better parameter to describe the soil degradation characteristics,and the degradation degree of shear stress became greater with the increasing of normal stress and accumulated displacement.Shear stress in post-cyclic monotonic shear tests did not generate a peak value and was lower than that in monotonic shear tests under the same normal stress.The soil was completely disturbed and reached the residual strength when the cumulative displacement approached 6 m.An empirical equation to evaluate shear stress degradation mechanism was formulated and the procedure of parameter identification was presented.

Dual-objective pattern optimization method for land suitability zoning in mountain counties

As the basic administrative unit of China,counties have grown rapidly in recent years in the context of rapid urbanization,especially for counties located in mountainous areas.The drastic changes in land in mountainous areas can easily cause irreversible damage to the sensitive ecological environment.Through the dual-objective suitability zoning of ecological and construction balance,regional sustainable land use patterns can be realized.In this study,Hantai District in Southern Shaanxi province,China,was chosen as the research area aiming at creating a balance between ecological supply and the development of construction in spatial planning.A dual-objective process evaluation system for ecological protection and construction development was proposed with 15 resistance factors selected from three attributes:natural ecology,economic society,and policy.The minimum resistance surface discrimination methods for ecological land and construction development land were proposed based on vertical space superposition and horizontal minimum cumulative resistance models.Finally,the land in Hantai District was divided into four development grades from the optimal angle of dual goals,i.e.,the construction core zone being 134.56 km^(2),the suitable construction zone 115.77 km2,the ecological buffer zone 153.74 km^(2),and the ecological control zone 151.93 km^(2),using the method combining resistance difference and threshold division.In addition,the development direction of each town under jurisdiction was identified.This study compensates for the deficiency of traditional methods that evaluate land only from a single vertical or horizontal process.

Energy-based damage assessment of continuous-span reinforced concrete highway bridges

This paper conducts a comparative study on seismic damage to reinforced concrete(RC)bridges,using three damage models:Park and Ang,Hindi and Sexsmith,and input energy-based damage(IEBD)indices,and presents a global cumulative damage model based on the IEBD index to establish a practical damage assessment of an overall bridge system.A series of RC bridges are studied under seismic loadings,and to compare the efficiency and reliability of the damage indices,damage curves of RC piers are developed,and damage levels of piers are calculated at design basis earthquake(DBE)and maximum considered earthquake(MCE)levels.The global cumulative damage index is calculated for bridge models regarding damage values of components.The results indicate that the IEBD index shows a gradual progression of damage and provides reasonable values for different damage levels of piers compared to two other damage indices.Moreover,the global cumulative damage index shows the impact of induced damage to a certain component regarding the damage level of the overall bridge system.Moreover,this new approach is a relatively simple and practical tool for seismic damage assessment of RC bridge systems,which can be implemented in finite element models,particularly in the absence of experimental data.