With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environmen...With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.展开更多
The electrocatalytic conversion of CO_(2) into valuable chemical feedstocks using renewable electricity offers a compelling strategy for closing the carbon loop.While copper-based materials are effective in catalyzing...The electrocatalytic conversion of CO_(2) into valuable chemical feedstocks using renewable electricity offers a compelling strategy for closing the carbon loop.While copper-based materials are effective in catalyzing CO_(2) to C_(2+)products,the instability of Cu^(+)species,which tend to reduce to Cu~0 at cathodic potentials during CO_(2) reduction,poses a significant challenge.Here,we report the development of SmCu_(2)O and investigate the influence of f-d orbital hybridization on the CO_(2) reduction reaction (CO_(2)RR).Supported by density functional theory (DFT) calculations,our experimental results demonstrate that hybridization between Sm^(3+)4f and Cu^(+)3d orbitals not only improves the adsorption of *CO intermediates and increases CO coverage to stabilize Cu^(+) but also facilitates CO_(2) activation and lowers the energy barriers for CAC coupling.Notably,Sm-Cu_(2)O achieves a Faradaic efficiency for C_(2)H_(4) that is 38%higher than that of undoped Cu_(2)O.Additionally,it sustains its catalytic activity over an extended operational period exceeding 7 h,compared to merely 2 h for the undoped sample.This research highlights the potential of fd orbital hybridization in enhancing the efficacy of copper-based catalysts for CO_(2)RR,pointing towards a promising direction for the development of durable,high-performance electrocatalysts for sustainable chemical synthesis.展开更多
It is acknowledged that injecting CO_(2) into oil reservoirs and saline aquifers for storage is a practical and affordable method for CO_(2) sequestration.Most CO_(2) produced from industrial exhaust contains impurity...It is acknowledged that injecting CO_(2) into oil reservoirs and saline aquifers for storage is a practical and affordable method for CO_(2) sequestration.Most CO_(2) produced from industrial exhaust contains impurity gases such as H_(2)S that might impact CO_(2) sequestration due to competitive adsorption.This study makes a commendable effort to explore the adsorption behavior of CO_(2)/H_(2)S mixtures in calcite slit nanopores.Grand Canonical Monte Carlo(GCMC)simulation is employed to reveal the adsorption of CO_(2),H_(2)S as well as their binary mixtures in calcite nanopores.Results show that the increase in pressure and temperature can promote and inhibit the adsorption capacity of CO_(2) and H_(2)S in calcite nanopores,respectively.CO_(2)exhibits stronger adsorption on calcite surface than H_(2)S.Electrostatic energy plays the dominating role in the adsorption behavior.Electrostatic energy accounts for 97.11%of the CO_(2)-calcite interaction energy and 56.33%of the H_(2)S-calcite interaction energy at 10 MPa and 323.15 K.The presence of H_(2)S inhibits the CO_(2) adsorption in calcite nanopores due to competitive adsorption,and a higher mole fraction of H_(2)S leads to less CO_(2) adsorption.The quantity of CO_(2) adsorbed is lessened by approximately 33%when the mole fraction of H_(2)S reaches 0.25.CO_(2) molecules preferentially occupy the regions near the po re wall and H_(2)S molecules tend to reside at the center of nanopore even when the molar ratio of CO_(2) is low,indicating that CO_(2) has an adsorption priority on the calcite surface over H_(2)S.In addition,moisture can weaken the adsorption of both CO_(2) and H_(2)S,while CO_(2) is more affected.More interestingly,we find that pure CO_(2) is more suitable to be sequestrated in the shallower formations,i.e.,500-1500 m,whereas CO_(2)with H_(2)S impurity should be settled in the deeper reservoirs.展开更多
以水和氧气为原料,光催化产过氧化氢(H_(2)O_(2))具有绿色、清洁的特点而受到广泛关注。针对氮化碳(g-C_(3)N_(4))本征光催化活性低的问题,本文采用两步热聚合法制备了具有大比表面积和结晶性增强的超薄g-C_(3)N_(4)纳米片光催化剂。煅...以水和氧气为原料,光催化产过氧化氢(H_(2)O_(2))具有绿色、清洁的特点而受到广泛关注。针对氮化碳(g-C_(3)N_(4))本征光催化活性低的问题,本文采用两步热聚合法制备了具有大比表面积和结晶性增强的超薄g-C_(3)N_(4)纳米片光催化剂。煅烧条件对g-C_(3)N_(4)的结构属性和催化性能有显著影响。两步焙烧和1℃·min^(-1)最佳升温速率制备的样品(CN-T-1)表现出显著提高的光催化产H_(2)O_(2)效率(3177.0μmol·g^(-1)·h^(-1)),为一步焙烧和1℃·min^(-1)升温速率制备的样品(CN-O-1)(858.6μmol·g^(-1)·h^(-1))的3.7倍,高于文献报导的纯g-C_(3)N_(4)产H_(2)O_(2)效率。CN-T-1在5次循环使用中H_(2)O_(2)产率先略有下降,后基本保持不变,表现出良好的稳定性。相较于CN-O-1,CN-T-1增强的催化性能归因于更大的比表面积、增强的结晶性、更高氧吸附能力和光生载流子分离效率、更长的载流子寿命,以及超薄片层使其具有更大的带隙(3.07 e V,比CN-O-1大+0.26 e V)和更正的价带位置。·O_(2)^(-)自由基被证实为主要的活性物种。CN-T-1光催化产H_(2)O_(2)被证实为两步单电子ORR路径(O_(2)+e^(-)→·O_(2)^(-)→H_(2)O_(2))。展开更多
The main active components of ginseng are ginsenosides,which play significant roles in treating cardiovascular diseases,cancer,and providing antioxidant effects.Ginsenosides are primarily synthesized through the mevalo...The main active components of ginseng are ginsenosides,which play significant roles in treating cardiovascular diseases,cancer,and providing antioxidant effects.Ginsenosides are primarily synthesized through the mevalo-nate pathway and the methylerythritol phosphate pathway.Many key enzyme genes involved in this biosynthetic process have been cloned and validated,yet the regulatory functions of transcription factors remain unclear.The C_(2)H_(2)-type zincfinger protein family,one of the largest families of transcription factors,is crucial in plant growth and development,response to biotic and abiotic stresses,and regulation of secondary metabolism.This study,based on the ginseng transcriptome database from Jilin,conducted a correlation analysis between the expression levels of PgZFPs genes in the Jilin ginseng C_(2)H_(2)-type zincfinger protein family and ginsenoside content,a gen-ome-wide association study of PgZFPs,and co-expression analysis of PgZFPs with validated key enzyme genes.Ultimately,five candidate genes involved in ginsenoside biosynthesis were identified.The involvement of PgZFP27 and PgZFP-59-02 genes from the PgZFPs family in the biosynthesis of ginsenosides was validated through in vitro methyl jasmonate(MeJA)induction experiments.This result provides new genetic resources for the biosynthesis of ginsenosides.展开更多
基金supported by the National Natural Science Foundation of China (No.52364022)the Natural Science Foundation of Guangxi Province,China (Nos.2023JJA160192 and 2021GXNSFAA220096)+1 种基金the Guangxi Science and Technology Major Project,China (No.AA23073018)the Guangxi Chongzuo Science and Technology Plan,China (No.2023ZY00503).
文摘With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.
基金Financial support from the National Natural Science Foundation of China(grant nos.22379006,21575016,U20A20154,22279005)from the National Program for Support of Top-notch Young Professionals is gratefully acknowledged。
文摘The electrocatalytic conversion of CO_(2) into valuable chemical feedstocks using renewable electricity offers a compelling strategy for closing the carbon loop.While copper-based materials are effective in catalyzing CO_(2) to C_(2+)products,the instability of Cu^(+)species,which tend to reduce to Cu~0 at cathodic potentials during CO_(2) reduction,poses a significant challenge.Here,we report the development of SmCu_(2)O and investigate the influence of f-d orbital hybridization on the CO_(2) reduction reaction (CO_(2)RR).Supported by density functional theory (DFT) calculations,our experimental results demonstrate that hybridization between Sm^(3+)4f and Cu^(+)3d orbitals not only improves the adsorption of *CO intermediates and increases CO coverage to stabilize Cu^(+) but also facilitates CO_(2) activation and lowers the energy barriers for CAC coupling.Notably,Sm-Cu_(2)O achieves a Faradaic efficiency for C_(2)H_(4) that is 38%higher than that of undoped Cu_(2)O.Additionally,it sustains its catalytic activity over an extended operational period exceeding 7 h,compared to merely 2 h for the undoped sample.This research highlights the potential of fd orbital hybridization in enhancing the efficacy of copper-based catalysts for CO_(2)RR,pointing towards a promising direction for the development of durable,high-performance electrocatalysts for sustainable chemical synthesis.
基金financial support from the National Natural Science Foundation of China (Grant No.52004320)the Science Foundation of China University of Petroleum,Beijing (No.2462021QNXZ012,No.2462022BJRC001,and No.2462021YJRC012)the funding from the State Key Laboratory of Petroleum Resources and Engineering (No.PRP/indep-1-2103)。
文摘It is acknowledged that injecting CO_(2) into oil reservoirs and saline aquifers for storage is a practical and affordable method for CO_(2) sequestration.Most CO_(2) produced from industrial exhaust contains impurity gases such as H_(2)S that might impact CO_(2) sequestration due to competitive adsorption.This study makes a commendable effort to explore the adsorption behavior of CO_(2)/H_(2)S mixtures in calcite slit nanopores.Grand Canonical Monte Carlo(GCMC)simulation is employed to reveal the adsorption of CO_(2),H_(2)S as well as their binary mixtures in calcite nanopores.Results show that the increase in pressure and temperature can promote and inhibit the adsorption capacity of CO_(2) and H_(2)S in calcite nanopores,respectively.CO_(2)exhibits stronger adsorption on calcite surface than H_(2)S.Electrostatic energy plays the dominating role in the adsorption behavior.Electrostatic energy accounts for 97.11%of the CO_(2)-calcite interaction energy and 56.33%of the H_(2)S-calcite interaction energy at 10 MPa and 323.15 K.The presence of H_(2)S inhibits the CO_(2) adsorption in calcite nanopores due to competitive adsorption,and a higher mole fraction of H_(2)S leads to less CO_(2) adsorption.The quantity of CO_(2) adsorbed is lessened by approximately 33%when the mole fraction of H_(2)S reaches 0.25.CO_(2) molecules preferentially occupy the regions near the po re wall and H_(2)S molecules tend to reside at the center of nanopore even when the molar ratio of CO_(2) is low,indicating that CO_(2) has an adsorption priority on the calcite surface over H_(2)S.In addition,moisture can weaken the adsorption of both CO_(2) and H_(2)S,while CO_(2) is more affected.More interestingly,we find that pure CO_(2) is more suitable to be sequestrated in the shallower formations,i.e.,500-1500 m,whereas CO_(2)with H_(2)S impurity should be settled in the deeper reservoirs.
基金supported by the Natural Science Foundation of China(51572074)Open Fund of Key Laboratory of Drug Analysis and Anti-drug Technology of the Ministry of Public Security(YNPL-B2021002)。
文摘以水和氧气为原料,光催化产过氧化氢(H_(2)O_(2))具有绿色、清洁的特点而受到广泛关注。针对氮化碳(g-C_(3)N_(4))本征光催化活性低的问题,本文采用两步热聚合法制备了具有大比表面积和结晶性增强的超薄g-C_(3)N_(4)纳米片光催化剂。煅烧条件对g-C_(3)N_(4)的结构属性和催化性能有显著影响。两步焙烧和1℃·min^(-1)最佳升温速率制备的样品(CN-T-1)表现出显著提高的光催化产H_(2)O_(2)效率(3177.0μmol·g^(-1)·h^(-1)),为一步焙烧和1℃·min^(-1)升温速率制备的样品(CN-O-1)(858.6μmol·g^(-1)·h^(-1))的3.7倍,高于文献报导的纯g-C_(3)N_(4)产H_(2)O_(2)效率。CN-T-1在5次循环使用中H_(2)O_(2)产率先略有下降,后基本保持不变,表现出良好的稳定性。相较于CN-O-1,CN-T-1增强的催化性能归因于更大的比表面积、增强的结晶性、更高氧吸附能力和光生载流子分离效率、更长的载流子寿命,以及超薄片层使其具有更大的带隙(3.07 e V,比CN-O-1大+0.26 e V)和更正的价带位置。·O_(2)^(-)自由基被证实为主要的活性物种。CN-T-1光催化产H_(2)O_(2)被证实为两步单电子ORR路径(O_(2)+e^(-)→·O_(2)^(-)→H_(2)O_(2))。
基金This work was supported by the Department of Science and Technology of Jilin Province(20240101227JC,20210402043GH,20200801063GH,20190201264JC,20190103104JH,20180414077GH,and 20180101027JC)the Development and Reform Commission of Jilin Province(2016C064 and 2018C047-3).
文摘The main active components of ginseng are ginsenosides,which play significant roles in treating cardiovascular diseases,cancer,and providing antioxidant effects.Ginsenosides are primarily synthesized through the mevalo-nate pathway and the methylerythritol phosphate pathway.Many key enzyme genes involved in this biosynthetic process have been cloned and validated,yet the regulatory functions of transcription factors remain unclear.The C_(2)H_(2)-type zincfinger protein family,one of the largest families of transcription factors,is crucial in plant growth and development,response to biotic and abiotic stresses,and regulation of secondary metabolism.This study,based on the ginseng transcriptome database from Jilin,conducted a correlation analysis between the expression levels of PgZFPs genes in the Jilin ginseng C_(2)H_(2)-type zincfinger protein family and ginsenoside content,a gen-ome-wide association study of PgZFPs,and co-expression analysis of PgZFPs with validated key enzyme genes.Ultimately,five candidate genes involved in ginsenoside biosynthesis were identified.The involvement of PgZFP27 and PgZFP-59-02 genes from the PgZFPs family in the biosynthesis of ginsenosides was validated through in vitro methyl jasmonate(MeJA)induction experiments.This result provides new genetic resources for the biosynthesis of ginsenosides.
