(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]是新型含能钙钛矿化合物的典型代表,需明确其热分解行为、热分解机制及感度特性,以推动其在配方中的应用。以差示扫描量热-热重分析方法实现了分解放热量、分解温度等参数的获取;以动力学模拟计算...(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]是新型含能钙钛矿化合物的典型代表,需明确其热分解行为、热分解机制及感度特性,以推动其在配方中的应用。以差示扫描量热-热重分析方法实现了分解放热量、分解温度等参数的获取;以动力学模拟计算解析了相关分解机理;以同步热分析-红外-质谱联用技术结合原位红外技术探索了(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]的分解产物及分解历程;以国军标法获得了热感度、摩擦感度与撞击感度参数。结果表明:在10℃·min^(-1)的升温速率下,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]分解放热量为4227 J·g^(-1),分解温度则达到345℃,高于黑索今(RDX)、奥克托今(HMX)、六硝基六氮杂异伍兹烷(CL-20)等多数现役含能材料,显示了优异的热稳定性;分解产物研究表明其立方笼状骨架有效稳定了内部结合的有机物分子,使其热稳定性较高。此外,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]在100℃下加热48 h的放气量约0.04 m L·g^(-1),撞击感度与机械感度分别为32%和80%,优于RDX和HMX。展开更多
Plasma-assisted ball milling was carried out on the Al+C3H6N6 system and Al+C_(4)H_(4)N_(4) system,respectively.The phase structure,functional groups and synthesis mechanism were analyzed by XRD and FT-IR,and the diff...Plasma-assisted ball milling was carried out on the Al+C3H6N6 system and Al+C_(4)H_(4)N_(4) system,respectively.The phase structure,functional groups and synthesis mechanism were analyzed by XRD and FT-IR,and the differences in the synthesis process of nano-AlN with different solid nitrogen sources were discussed.The results show that C3H6N6 has a stable triazine ring structure,and its chemical bond is firm and difficult to break,so AlN cannot be synthesized directly by solid-solid reaction at room temperature.However,there are a large number of nitrile groups(-CN)and amino groups(-NH_(2))in C_(4)H_(4)N_(4) molecules.Under the combined action of plasma bombardment and mechanical energy activation,C_(4)H_(4)N_(4) molecules undergo polycondensation and deamination,so that the ball milling tank is filled with a large number of active nitrogen-containing groups such as N=,≡N,etc.These groups and ball milling activated Al can synthesize nano-AlN at room temperature,with a conversion rate of 92%.SEM,DSC/TG analysis showed that the powder obtained by ball milling was formed by soft agglomeration of many fine primary particles about 50–80 nm.The surface morphology of the powder was loose and porous,and it had strong activity.After annealing at 800℃,the conversion rate of the Al+C_(4)H_(4)N_(4) system reached 99%.展开更多
文摘(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]是新型含能钙钛矿化合物的典型代表,需明确其热分解行为、热分解机制及感度特性,以推动其在配方中的应用。以差示扫描量热-热重分析方法实现了分解放热量、分解温度等参数的获取;以动力学模拟计算解析了相关分解机理;以同步热分析-红外-质谱联用技术结合原位红外技术探索了(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]的分解产物及分解历程;以国军标法获得了热感度、摩擦感度与撞击感度参数。结果表明:在10℃·min^(-1)的升温速率下,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]分解放热量为4227 J·g^(-1),分解温度则达到345℃,高于黑索今(RDX)、奥克托今(HMX)、六硝基六氮杂异伍兹烷(CL-20)等多数现役含能材料,显示了优异的热稳定性;分解产物研究表明其立方笼状骨架有效稳定了内部结合的有机物分子,使其热稳定性较高。此外,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]在100℃下加热48 h的放气量约0.04 m L·g^(-1),撞击感度与机械感度分别为32%和80%,优于RDX和HMX。
基金The study was supported by the Education and Research Project for Young and Middle-Aged Teachers in Fujian Province(JAT201167).
文摘Plasma-assisted ball milling was carried out on the Al+C3H6N6 system and Al+C_(4)H_(4)N_(4) system,respectively.The phase structure,functional groups and synthesis mechanism were analyzed by XRD and FT-IR,and the differences in the synthesis process of nano-AlN with different solid nitrogen sources were discussed.The results show that C3H6N6 has a stable triazine ring structure,and its chemical bond is firm and difficult to break,so AlN cannot be synthesized directly by solid-solid reaction at room temperature.However,there are a large number of nitrile groups(-CN)and amino groups(-NH_(2))in C_(4)H_(4)N_(4) molecules.Under the combined action of plasma bombardment and mechanical energy activation,C_(4)H_(4)N_(4) molecules undergo polycondensation and deamination,so that the ball milling tank is filled with a large number of active nitrogen-containing groups such as N=,≡N,etc.These groups and ball milling activated Al can synthesize nano-AlN at room temperature,with a conversion rate of 92%.SEM,DSC/TG analysis showed that the powder obtained by ball milling was formed by soft agglomeration of many fine primary particles about 50–80 nm.The surface morphology of the powder was loose and porous,and it had strong activity.After annealing at 800℃,the conversion rate of the Al+C_(4)H_(4)N_(4) system reached 99%.
