Geometry optimization of p-C_(6)H_(4)-connected cyclo[20]carbon(p-C_(6)H_(4)-C_(20))was carried out at M062X/6-311G(d,p)level,three kinds of bond orders(Mayer,Laplacian,and Wiberg),electron-hole distributions,localize...Geometry optimization of p-C_(6)H_(4)-connected cyclo[20]carbon(p-C_(6)H_(4)-C_(20))was carried out at M062X/6-311G(d,p)level,three kinds of bond orders(Mayer,Laplacian,and Wiberg),electron-hole distributions,localized orbital locators(LOL),and infrared(IR)spectrum were also performed at the same level.Based on TD-DFT M062X/6-311G(d,p)method,the first 20 excited states and ultraviolet(UV)spectra of p-C_(6)H_(4)-C_(20) were calculated.Calculation results of π-electron delocalization analyses prove thatπ-electron delocalization of p-C_(6)H_(4)-C_(20) is more likely to occur on shorter C-C bonds rather than longer C-C bonds,and inside/outside of the ring plane rather than above/below the ring plane.Two absorption peaks of p-C_(6)H_(4)-C_(20) locate at about 319 nm and 236 nm,respectively.展开更多
(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]是新型含能钙钛矿化合物的典型代表,需明确其热分解行为、热分解机制及感度特性,以推动其在配方中的应用。以差示扫描量热-热重分析方法实现了分解放热量、分解温度等参数的获取;以动力学模拟计算...(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]是新型含能钙钛矿化合物的典型代表,需明确其热分解行为、热分解机制及感度特性,以推动其在配方中的应用。以差示扫描量热-热重分析方法实现了分解放热量、分解温度等参数的获取;以动力学模拟计算解析了相关分解机理;以同步热分析-红外-质谱联用技术结合原位红外技术探索了(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]的分解产物及分解历程;以国军标法获得了热感度、摩擦感度与撞击感度参数。结果表明:在10℃·min^(-1)的升温速率下,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]分解放热量为4227 J·g^(-1),分解温度则达到345℃,高于黑索今(RDX)、奥克托今(HMX)、六硝基六氮杂异伍兹烷(CL-20)等多数现役含能材料,显示了优异的热稳定性;分解产物研究表明其立方笼状骨架有效稳定了内部结合的有机物分子,使其热稳定性较高。此外,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]在100℃下加热48 h的放气量约0.04 m L·g^(-1),撞击感度与机械感度分别为32%和80%,优于RDX和HMX。展开更多
文摘Geometry optimization of p-C_(6)H_(4)-connected cyclo[20]carbon(p-C_(6)H_(4)-C_(20))was carried out at M062X/6-311G(d,p)level,three kinds of bond orders(Mayer,Laplacian,and Wiberg),electron-hole distributions,localized orbital locators(LOL),and infrared(IR)spectrum were also performed at the same level.Based on TD-DFT M062X/6-311G(d,p)method,the first 20 excited states and ultraviolet(UV)spectra of p-C_(6)H_(4)-C_(20) were calculated.Calculation results of π-electron delocalization analyses prove thatπ-electron delocalization of p-C_(6)H_(4)-C_(20) is more likely to occur on shorter C-C bonds rather than longer C-C bonds,and inside/outside of the ring plane rather than above/below the ring plane.Two absorption peaks of p-C_(6)H_(4)-C_(20) locate at about 319 nm and 236 nm,respectively.
基金supported by the National Natural Foundation of China(No.21827804,No.22103075,No.22173089)the National Key R&D Program of China(No.2021YFA0716801,No.2017YFA0303502)。
文摘(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]是新型含能钙钛矿化合物的典型代表,需明确其热分解行为、热分解机制及感度特性,以推动其在配方中的应用。以差示扫描量热-热重分析方法实现了分解放热量、分解温度等参数的获取;以动力学模拟计算解析了相关分解机理;以同步热分析-红外-质谱联用技术结合原位红外技术探索了(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]的分解产物及分解历程;以国军标法获得了热感度、摩擦感度与撞击感度参数。结果表明:在10℃·min^(-1)的升温速率下,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]分解放热量为4227 J·g^(-1),分解温度则达到345℃,高于黑索今(RDX)、奥克托今(HMX)、六硝基六氮杂异伍兹烷(CL-20)等多数现役含能材料,显示了优异的热稳定性;分解产物研究表明其立方笼状骨架有效稳定了内部结合的有机物分子,使其热稳定性较高。此外,(C_(6)H_(14)N_(2))[Na(ClO_(4))_(3)]在100℃下加热48 h的放气量约0.04 m L·g^(-1),撞击感度与机械感度分别为32%和80%,优于RDX和HMX。
