The C_(f)/Al composites were joined to the TC4 alloy via the laser-induced combustion joining method.The exothermic reaction of the interlayer provided the required energy for the joining process.By combining the theo...The C_(f)/Al composites were joined to the TC4 alloy via the laser-induced combustion joining method.The exothermic reaction of the interlayer provided the required energy for the joining process.By combining the theoretical calculation and experiment,the chemical composition of the Ni−Al−Zr interlayer was designed.The microstructure and mechanical properties of the joint were investigated.The results show that the addition of Zr slightly weakened the combustion reaction of exothermic interlayer but played a key role in the successful joining.Ni−Al−Zr interlayer reacted with substrates,forming a TiAl_(3)layer adjacent to TC4 alloy and NiAl_(3),Ni_(2)Al_(3)layers adjacent to the C_(f)/Al composites.Zr content dominated the microstructure and shear strength of the joint.When the Zr content was 5 wt.%under the joining pressure of 2 MPa,the joint had a maximum shear strength of 19.8 MPa.展开更多
C f/SiC composites were prepared by precursor pyrolysis hot pressing, and the effect of fiber characteristics on the fracture behavior of the composites was investigated. Because the heat treatment temperature of fibe...C f/SiC composites were prepared by precursor pyrolysis hot pressing, and the effect of fiber characteristics on the fracture behavior of the composites was investigated. Because the heat treatment temperature of fiber T300 (below 1?500?℃) was much lower than that of fiber M40JB (over 2?000?℃), fiber T300 had lower degree of graphitization and consisted of more impurities compared with fiber M40JB, suggesting that T300 exhibits higher chemical activity. As a result, the composite with T300 showed a brittle fracture behavior, which is mainly ascribed to a strongly bonded fiber/matrix interface as well as the degradation of fibers during the preparation of the composite. However, the composite with M40JB exhibits a tough fracture behavior, which is primarily attributed to a weakly bonded fiber/matrix interface and higher strength retention of the fibers.展开更多
KVPO_(4)F with excellent structural stability and high operating voltage has been identified as a promising cathode for potassium-ion batteries(PIBs),but limits in sluggish ion transport and severe volume change cause...KVPO_(4)F with excellent structural stability and high operating voltage has been identified as a promising cathode for potassium-ion batteries(PIBs),but limits in sluggish ion transport and severe volume change cause insufficient potassium storage capability.Here,a high-energy and low-strain KVPO_(4)F composite cathode assisted by multifunctional K_(2)C_(4)O_(4)electrode stabilizer is exquisitely designed.Systematical electrochemical investigations demonstrate that this composite cathode can deliver a remarkable energy density up to 530 Wh kg^(-1)with 142.7 mAh g^(-1)of reversible capacity at 25 mA g^(-1),outstanding rate capability of 70.6 mAh g^(-1)at 1000 mA g^(-1),and decent cycling stability.Furthermore,slight volume change(~5%)and increased interfacial stability with thin and even cathode-electrolyte interphase can be observed through in situ and ex situ characterizations,which are attributed to the synergistic effect from in situ potassium compensation and carbon deposition through self-sacrificing K_(2)C_(4)O_(4)additive.Moreover,potassium-ion full cells manifest significant improvement in energy density and cycling stability.This work demonstrates a positive impact of K_(2)C_(4)O_(4)additive on the comprehensive electrochemical enhancement,especially the activation of high-voltage plateau capacity and provides an efficient strategy to enlighten the design of other high-voltage cathodes for advanced high-energy batteries.展开更多
The Cf/SiC composites were prepared by precursor conversion-hot pressing sintering with AIN and Y2Os as additives. The effects of sintering temperature and additives on the microstructures and properties of the compos...The Cf/SiC composites were prepared by precursor conversion-hot pressing sintering with AIN and Y2Os as additives. The effects of sintering temperature and additives on the microstructures and properties of the composites were investigated. The composite sintered at as low as 1 75O℃ already showed higher density and better mechanical properties, which was mainly attributed to the liquid-phase-sintering and the formation of the AIN-SiC solid solution. With increasing the sintering temperature to 1 800 ℃, the flexural strength and fracture toughness of the composite were substantially improved up to 691. 6 MPa and 2O. 7 MPa’ m1/2 respectively in spite of the slightly elevated density, and the composite exhibited "tough" failure. Despite the improved density, the composite sintered at 1 85O℃ displayed brittle failure, which mainly attributed to the strongly bonded fiber/matrix interface and the degradation of the properties of the fibers.展开更多
基金the financial supports from the National Natural Science Foundation of China(Nos.51975149,51905055)the Natural Science Foundation of Chongqing,China(No.cstc2020jcyj-msxmX0115)the Fundamental Research Funds for the Central Universities Project,China(No.2020CDJ-LHZZ 086).
文摘The C_(f)/Al composites were joined to the TC4 alloy via the laser-induced combustion joining method.The exothermic reaction of the interlayer provided the required energy for the joining process.By combining the theoretical calculation and experiment,the chemical composition of the Ni−Al−Zr interlayer was designed.The microstructure and mechanical properties of the joint were investigated.The results show that the addition of Zr slightly weakened the combustion reaction of exothermic interlayer but played a key role in the successful joining.Ni−Al−Zr interlayer reacted with substrates,forming a TiAl_(3)layer adjacent to TC4 alloy and NiAl_(3),Ni_(2)Al_(3)layers adjacent to the C_(f)/Al composites.Zr content dominated the microstructure and shear strength of the joint.When the Zr content was 5 wt.%under the joining pressure of 2 MPa,the joint had a maximum shear strength of 19.8 MPa.
文摘C f/SiC composites were prepared by precursor pyrolysis hot pressing, and the effect of fiber characteristics on the fracture behavior of the composites was investigated. Because the heat treatment temperature of fiber T300 (below 1?500?℃) was much lower than that of fiber M40JB (over 2?000?℃), fiber T300 had lower degree of graphitization and consisted of more impurities compared with fiber M40JB, suggesting that T300 exhibits higher chemical activity. As a result, the composite with T300 showed a brittle fracture behavior, which is mainly ascribed to a strongly bonded fiber/matrix interface as well as the degradation of fibers during the preparation of the composite. However, the composite with M40JB exhibits a tough fracture behavior, which is primarily attributed to a weakly bonded fiber/matrix interface and higher strength retention of the fibers.
基金the financial support from the National Key R&D Program of China(Grant No.2023YFE0202000)the National Natural Science Foundation of China(Grant No.52102213)+1 种基金Natural Science Foundation of Jilin Province(Grant No.20230101128JC)Double-Thousand Talents Plan of Jiangxi Province(jxsq2023102005)
文摘KVPO_(4)F with excellent structural stability and high operating voltage has been identified as a promising cathode for potassium-ion batteries(PIBs),but limits in sluggish ion transport and severe volume change cause insufficient potassium storage capability.Here,a high-energy and low-strain KVPO_(4)F composite cathode assisted by multifunctional K_(2)C_(4)O_(4)electrode stabilizer is exquisitely designed.Systematical electrochemical investigations demonstrate that this composite cathode can deliver a remarkable energy density up to 530 Wh kg^(-1)with 142.7 mAh g^(-1)of reversible capacity at 25 mA g^(-1),outstanding rate capability of 70.6 mAh g^(-1)at 1000 mA g^(-1),and decent cycling stability.Furthermore,slight volume change(~5%)and increased interfacial stability with thin and even cathode-electrolyte interphase can be observed through in situ and ex situ characterizations,which are attributed to the synergistic effect from in situ potassium compensation and carbon deposition through self-sacrificing K_(2)C_(4)O_(4)additive.Moreover,potassium-ion full cells manifest significant improvement in energy density and cycling stability.This work demonstrates a positive impact of K_(2)C_(4)O_(4)additive on the comprehensive electrochemical enhancement,especially the activation of high-voltage plateau capacity and provides an efficient strategy to enlighten the design of other high-voltage cathodes for advanced high-energy batteries.
文摘The Cf/SiC composites were prepared by precursor conversion-hot pressing sintering with AIN and Y2Os as additives. The effects of sintering temperature and additives on the microstructures and properties of the composites were investigated. The composite sintered at as low as 1 75O℃ already showed higher density and better mechanical properties, which was mainly attributed to the liquid-phase-sintering and the formation of the AIN-SiC solid solution. With increasing the sintering temperature to 1 800 ℃, the flexural strength and fracture toughness of the composite were substantially improved up to 691. 6 MPa and 2O. 7 MPa’ m1/2 respectively in spite of the slightly elevated density, and the composite exhibited "tough" failure. Despite the improved density, the composite sintered at 1 85O℃ displayed brittle failure, which mainly attributed to the strongly bonded fiber/matrix interface and the degradation of the properties of the fibers.
