Understanding the relationship between the chemical composition and pyrolysis performance of endothermic hydrocarbon fuel(EHF) is of great significance for the design and optimization of advanced EHFs. In this work, t...Understanding the relationship between the chemical composition and pyrolysis performance of endothermic hydrocarbon fuel(EHF) is of great significance for the design and optimization of advanced EHFs. In this work, the effect of deep hydrogenation on the pyrolysis of commercial RP-3 is investigated.Fuels with different hydrogenation degrees were obtained by the partially and completely catalytic hydrogenation and their pyrolysis performances were investigated using an apparatus equipped with an electrically heated tubular reactor. The results show that with the increase of hydrogenation degree, fuel conversion almost remains constant during the pyrolysis process(500-650°C, 4 MPa);however, the heat sink increases slightly, and the anti-coking performance significantly improves, which are highly related to their H/C ratios. Detailed characterisations reveal that the difference of the pyrolysis performance can be ascribed to the content of aromatics and cycloalkanes: the former are prone to initiate secondary reactions to form coking precursors, while the latter could act as the hydrogen donor and release hydrogen, which will terminate the radical propagation reactions and suppress the coke deposition. This work should provide the guidance for upgrading EHFs by modulating the composition of EHFs.展开更多
The metal promoted In_(2)O_(3) catalysts for CO_(2) hydrogenation to methanol have attracted wide attention because of their high activity with high methanol selectivity.However,there was still no experimental confirm...The metal promoted In_(2)O_(3) catalysts for CO_(2) hydrogenation to methanol have attracted wide attention because of their high activity with high methanol selectivity.However,there was still no experimental confirmation if copper could be a good promoter for In_(2)O_(3).Herein,the Cu promoted In_(2)O_(3) catalyst was prepared using a deposition-precipitation method.Such prepared Cu/In_(2)O_(3) catalyst shows significantly higher CO_(2) conversion and space time yield(STY)of methanol,compared to the un-promoted In_(2)O_(3) catalyst.The loading of Cu facilitates the activation of both H_(2) and CO_(2) with the interface between the Cu cluster and defective In_(2)O_(3) as the active site.The Cu/In_(2)O_(3) catalyst takes the CO hydrogenation pathway for methanol synthesis from CO_(2) hydrogenation.It exhibits a unique size effect on the CO adsorption.At temperatures below 250℃,CO adsorption on Cu/In_(2)O_(3) is stronger than that on In_(2)O_(3),causing higher methanol selectivity.With increasing temperatu res,the Cu catalyst aggregates,which leads to the formation of weak CO adsorption site and causes a decrease in the methanol selectivity.Compared with other metal promoted In_(2)O_(3) catalysts,it can be concluded that the catalyst with stronger CO adsorption possesses higher methanol selectivity.展开更多
CO_(2) is the most cost-eff ective and abundant carbon resource,while the reverse water-gas reaction(rWGS)is one of the most eff ective methods of CO_(2) utilization.This work presents a comparative study of rWGS acti...CO_(2) is the most cost-eff ective and abundant carbon resource,while the reverse water-gas reaction(rWGS)is one of the most eff ective methods of CO_(2) utilization.This work presents a comparative study of rWGS activity for perovskite systems based on AFeO_(3)(where A=Ce,La,Y).These systems were synthesized by solution combustion synthesis(SCS)with diff erent ratios of fuel(glycine)and oxidizer(φ),diff erent amounts of NH 4 NO_(3),and the addition of alumina or silica as supports.Various techniques,including X-ray diff raction analysis,thermogravimetric analysis,Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy,energy-dispersive X-ray spectroscopy,N 2-physisorption,H_(2) temper-ature-programmed reduction,temperature-programmed desorption of H_(2) and CO_(2),Raman spectroscopy,and in situ FTIR,were used to relate the physicochemical properties with the catalytic performance of the obtained composites.Each specifi c perovskite-containing system(either bulk or supported)has its own optimalφand NH_(4) NO_(3) amount to achieve the highest yield and dispersion of the perovskite phase.Among all synthesized systems,bulk SCS-derived La-Fe-O systems showed the highest resistance to reducing environments and the easiest hydrogen desorption,outperforming La-Fe-O produced by solgel combustion(SGC).CO_(2) conversion into CO at 600°C for bulk ferrite systems,depending on the A-cation type and preparation method,follows the order La(SGC)<Y<Ce<La(SCS).The diff erences in properties between La-Fe-O obtained by the SCS and SGC methods can be attributed to diff erent ratios of oxygen and lanthanum vacancy contributions,hydroxyl coverage,morphology,and free iron oxide presence.In situ FTIR data revealed that CO_(2) hydrogenation occurs through formates generated under reaction conditions on the bulk system based on La-Fe-O,obtained by the SCS method.γ-Al_(2)O_(3) improves the dispersion of CeFeO_(3) and LaFeO_(3) phases,the specifi c surface area,and the quantity of adsorbed H_(2) and CO_(2).This led to a signifi cant increase in CO_(2) conversion for supported CeFeO_(3) but not for the La-based system compared to bulk and SiO_(2)-supported perovskite catalysts.However,adding alumina increased the activity per mass for both Ce-and La-based perovskite systems,reducing the amount of rare-earth components in the catalyst and thereby lowering the cost without substantially compromising stability.展开更多
The highly selective hydrogenation of 5-hydroxymethylfurfural to 2,5-dihydroxymethylfuran is an important reaction in the field of biomass hydrogenation,because it is a bridge between biomass resources and chemical in...The highly selective hydrogenation of 5-hydroxymethylfurfural to 2,5-dihydroxymethylfuran is an important reaction in the field of biomass hydrogenation,because it is a bridge between biomass resources and chemical industry.Here,we precisely constructed carbon nitride supported Pd-based catalysts by a simple impregnation-reduction method.By changing the reduction temperature,catalysts with different oxidation state could be precisely constructed.Moreover,the important correlation between the ratio of Pd^(0)/Pd^(2+)and catalytic activity is revealed during the selective hydrogenation of HMF.The Pd/g—C_(3)N_(4)—300 catalyst with a Pd^(0)/Pd^(2+)ratio of 3/2 showed the highest catalytic activity,which could get 96.9%5-hydroxymethylfurfural conversion and 90.3%2,5-dihydroxymethylfuran selectivity.Further density functional theory calculation revealed that the synergistic effect between Pd0and Pd2+in Pd/g—C_(3)N_(4)—300 system could boost the adsorption of the substrate and the dissociation of hydrogen.In this work,we highlight the important correlation between metal oxidation state and catalytic activity,which provides valuable insights for the rational design of precious metal catalysts for hydrogenation reactions.展开更多
Cu/ZnO is widely used in the hydrogenation of carbon dioxide (CO_(2)) to methanol (CH_(3)OH) to improve the lowconversion rate and selectivity generally observed. In this work, a series of In, Zr, Co, and Ni-doped CuO...Cu/ZnO is widely used in the hydrogenation of carbon dioxide (CO_(2)) to methanol (CH_(3)OH) to improve the lowconversion rate and selectivity generally observed. In this work, a series of In, Zr, Co, and Ni-doped CuO-ZnO catalysts wassynthesized via a hydrothermal method. By introducing a second metal element, the activity and dispersion of the activesites can be adjusted and the synergy between the metal and the carrier can be enhanced, forming an abundance of oxygenvacancies. Oxygen vacancies not only adsorb CO_(2) but also activate the intermediates in methanol synthesis, playing a keyrole in the entire reaction. Co3O4-CuO-ZnO had the best catalytic performance (a CO_(2) conversion rate of 9.17%;a CH_(3)OHselectivity of 92.77%). This study describes a typical strategy for multi-component doping to construct a catalyst with anabundance of oxygen vacancies, allowing more effective catalysis to synthesize CH_(3)OH from CO_(2).展开更多
Indium oxide(In_(2)O_(3)),as a promising candidate for CO_(2)hydrogenation to C_(1) products,often suffers from sintering and activity decline,closely related to the undesirable structural evolution under reaction con...Indium oxide(In_(2)O_(3)),as a promising candidate for CO_(2)hydrogenation to C_(1) products,often suffers from sintering and activity decline,closely related to the undesirable structural evolution under reaction conditions.Based on the comprehension of the dynamic evolution,this study presents an efficient strategy to alleviate the agglomeration of In_(2)O_(3)nanoparticles by the surface decoration with highly dispersed silica species(SiO_(x)).Various structural characterizations combined with density functional theory calculations demonstrated that the sintering resulted from the over-reduction,while the enhanced stability originated from the anchoring effect of highly stable In-OSi bonds,which hinders the substantial formation of metallic In(In^(0))and the subsequent agglomeration.0.6Si/In_(2)O_(3)exhibited CO_(2)conversion rate of10.0 mmol g^(-1)h^(-1)at steady state vs.3.5 mmol g^(-1)h^(-1)on In_(2)O_(3)in CO_(2)hydrogenation.Enhanced steady-state activity was also achieved on Pd-modified catalysts.Compared to the traditional Pd/In_(2)O_(3)catalyst,the methanol production rate of Pd catalyst supported on 0.6Si/In_(2)O_(3)was enhanced by 23%,showing the potential of In_(2)O_(3)modified by SiO_(x)in serving as a platform material.This work provides a promising method to design new In_(2)O_(3)-based catalysts with improved activity and stability in CO_(2)hydrogenation.展开更多
Production of light olefins from CO_(2), the primary greenhouse gases, is of great importance to mitigate the adverse effects of CO_(2) emission on environment and to supply the value-added products from nonpetroleum ...Production of light olefins from CO_(2), the primary greenhouse gases, is of great importance to mitigate the adverse effects of CO_(2) emission on environment and to supply the value-added products from nonpetroleum resource. However, development of robust catalyst with controllable selectivity and stability remains a challenge. Herein, we report that Zn-promoted Fe catalyst can boost the stable and selective production of light olefins from CO_(2). Specifically, the Zn-promoted Fe exhibits a highly stable activity and olefin selectivity over 200 h time-on-stream compared to the unpromoted Fe catalyst, primarily owing to the preservation of active χ-Fe_(5)C_(2) phase. Structural characterizations of the spent catalysts suggest that Zn substantially regulates the content of iron carbide on the surface and suppresses the reoxidation of bulk iron carbide during the reaction. DFT calculations confirm that adsorption of surface carbon atoms and graphene-like carbonaceous species are not thermochemically favored on Zn-promoted Fe catalyst. Carbon deposition by CAC coupling reactions of two surface carbon atoms and dehydrogenation of CH intermediate are also inhibited. Furthermore, the effects of Zn on antioxidation of iron carbide were also investigated. Zn favored the hydrogenation of surface adsorbed oxygen atoms to H_(2)O and the desorption of H_(2)O, which reduces the possibility of surface carbide being oxidized by the chemisorbed oxygen.展开更多
The catalytic hydrogenation of D-glucose over a 3 wt% Ru/C catalyst was studied varying the operating conditions in mild conditions range to optimize the obtention of D-sorbitol. The stirring speed, temperature, press...The catalytic hydrogenation of D-glucose over a 3 wt% Ru/C catalyst was studied varying the operating conditions in mild conditions range to optimize the obtention of D-sorbitol. The stirring speed, temperature, pressure, and initial glucose concentration were varied between 250 - 700 rpm, 343 - 383 K, 0.5 - 2 MPa, and 0.033 - 0.133 M, respectively. To verify the absence of mass transport limitations, the diffusion of reagents in the gas-liquid interface, the liquid-solid interface, and the internal diffusion in the particles were evaluated. Under the operating conditions studied, the reaction rate showed an order with respect to H<sub>2</sub> of 0.586 and with respect to glucose of 0.406. The kinetic data were adjusted using 3 general models and 19 different sub-models based on Langmuir-Hinshelwood-Hougen-Watson (LHHW) kinetics. Model 3a was the best one interpreting the aqueous phase hydrogenation of glucose (both reagents competitively adsorbed on the catalyst). The H<sub>2</sub> adsorption is dissociative and the rate-limiting step is the surface chemical reaction.展开更多
Anthraquinone hydrogenation to produce H_(2)O_(2) is an economically interesting reaction with great industrial importance.Here,we report a series of Pd/xAl catalysts with different AlCl_(3) contents by a conventional...Anthraquinone hydrogenation to produce H_(2)O_(2) is an economically interesting reaction with great industrial importance.Here,we report a series of Pd/xAl catalysts with different AlCl_(3) contents by a conventional stepwise impregnation method.The optimal Pd/1.0Al catalyst exhibits a higher performance toward anthraquinone hydrogenation with 8.3 g·L^(-1)hydrogenation efficiency,99.5%selectivity and good stability,obviously superior to that of Pd/Al_(2)O_(3) catalyst(5.2 g·L^(-1)and 97.2%).Detailed characterization demonstrates that AlCl_(3) can be grafted on the γ-Al_(2)O_(3) support to obtain a modified support with abundant surface weak acid and Lewis acid,which can adsorb and activate anthraquinone.Meanwhile,its steric hindrance could isolate and disperse active metals to form more active sites.The synergies between metal sites and acid sites promotes the anthraquinone hydrogenation.Furthermore,the good stability after grafting AlCl_(3) could attribute to the enhanced metal-support interaction inhibiting metal particles agglomeration and leaching.展开更多
基金support from National Key Research and Development Program of China(2021YFC2103701)the National Postdoctoral Program of China(GZB20230630)the National Natural Science Foundation of China(22208295).
文摘Understanding the relationship between the chemical composition and pyrolysis performance of endothermic hydrocarbon fuel(EHF) is of great significance for the design and optimization of advanced EHFs. In this work, the effect of deep hydrogenation on the pyrolysis of commercial RP-3 is investigated.Fuels with different hydrogenation degrees were obtained by the partially and completely catalytic hydrogenation and their pyrolysis performances were investigated using an apparatus equipped with an electrically heated tubular reactor. The results show that with the increase of hydrogenation degree, fuel conversion almost remains constant during the pyrolysis process(500-650°C, 4 MPa);however, the heat sink increases slightly, and the anti-coking performance significantly improves, which are highly related to their H/C ratios. Detailed characterisations reveal that the difference of the pyrolysis performance can be ascribed to the content of aromatics and cycloalkanes: the former are prone to initiate secondary reactions to form coking precursors, while the latter could act as the hydrogen donor and release hydrogen, which will terminate the radical propagation reactions and suppress the coke deposition. This work should provide the guidance for upgrading EHFs by modulating the composition of EHFs.
基金supported by the National Natural Science Foundation of China(22138009)the Fundamental Research Funds for the Central Universities of China。
文摘The metal promoted In_(2)O_(3) catalysts for CO_(2) hydrogenation to methanol have attracted wide attention because of their high activity with high methanol selectivity.However,there was still no experimental confirmation if copper could be a good promoter for In_(2)O_(3).Herein,the Cu promoted In_(2)O_(3) catalyst was prepared using a deposition-precipitation method.Such prepared Cu/In_(2)O_(3) catalyst shows significantly higher CO_(2) conversion and space time yield(STY)of methanol,compared to the un-promoted In_(2)O_(3) catalyst.The loading of Cu facilitates the activation of both H_(2) and CO_(2) with the interface between the Cu cluster and defective In_(2)O_(3) as the active site.The Cu/In_(2)O_(3) catalyst takes the CO hydrogenation pathway for methanol synthesis from CO_(2) hydrogenation.It exhibits a unique size effect on the CO adsorption.At temperatures below 250℃,CO adsorption on Cu/In_(2)O_(3) is stronger than that on In_(2)O_(3),causing higher methanol selectivity.With increasing temperatu res,the Cu catalyst aggregates,which leads to the formation of weak CO adsorption site and causes a decrease in the methanol selectivity.Compared with other metal promoted In_(2)O_(3) catalysts,it can be concluded that the catalyst with stronger CO adsorption possesses higher methanol selectivity.
基金The research was carried out within the State Assignment of the Ministry of Science and Higher Education of the Russian Federation(project No.FFUG-2024-0036)。
文摘CO_(2) is the most cost-eff ective and abundant carbon resource,while the reverse water-gas reaction(rWGS)is one of the most eff ective methods of CO_(2) utilization.This work presents a comparative study of rWGS activity for perovskite systems based on AFeO_(3)(where A=Ce,La,Y).These systems were synthesized by solution combustion synthesis(SCS)with diff erent ratios of fuel(glycine)and oxidizer(φ),diff erent amounts of NH 4 NO_(3),and the addition of alumina or silica as supports.Various techniques,including X-ray diff raction analysis,thermogravimetric analysis,Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy,energy-dispersive X-ray spectroscopy,N 2-physisorption,H_(2) temper-ature-programmed reduction,temperature-programmed desorption of H_(2) and CO_(2),Raman spectroscopy,and in situ FTIR,were used to relate the physicochemical properties with the catalytic performance of the obtained composites.Each specifi c perovskite-containing system(either bulk or supported)has its own optimalφand NH_(4) NO_(3) amount to achieve the highest yield and dispersion of the perovskite phase.Among all synthesized systems,bulk SCS-derived La-Fe-O systems showed the highest resistance to reducing environments and the easiest hydrogen desorption,outperforming La-Fe-O produced by solgel combustion(SGC).CO_(2) conversion into CO at 600°C for bulk ferrite systems,depending on the A-cation type and preparation method,follows the order La(SGC)<Y<Ce<La(SCS).The diff erences in properties between La-Fe-O obtained by the SCS and SGC methods can be attributed to diff erent ratios of oxygen and lanthanum vacancy contributions,hydroxyl coverage,morphology,and free iron oxide presence.In situ FTIR data revealed that CO_(2) hydrogenation occurs through formates generated under reaction conditions on the bulk system based on La-Fe-O,obtained by the SCS method.γ-Al_(2)O_(3) improves the dispersion of CeFeO_(3) and LaFeO_(3) phases,the specifi c surface area,and the quantity of adsorbed H_(2) and CO_(2).This led to a signifi cant increase in CO_(2) conversion for supported CeFeO_(3) but not for the La-based system compared to bulk and SiO_(2)-supported perovskite catalysts.However,adding alumina increased the activity per mass for both Ce-and La-based perovskite systems,reducing the amount of rare-earth components in the catalyst and thereby lowering the cost without substantially compromising stability.
基金supported by the National Key Research and Development Program of China(2021YFA1500500)。
文摘The highly selective hydrogenation of 5-hydroxymethylfurfural to 2,5-dihydroxymethylfuran is an important reaction in the field of biomass hydrogenation,because it is a bridge between biomass resources and chemical industry.Here,we precisely constructed carbon nitride supported Pd-based catalysts by a simple impregnation-reduction method.By changing the reduction temperature,catalysts with different oxidation state could be precisely constructed.Moreover,the important correlation between the ratio of Pd^(0)/Pd^(2+)and catalytic activity is revealed during the selective hydrogenation of HMF.The Pd/g—C_(3)N_(4)—300 catalyst with a Pd^(0)/Pd^(2+)ratio of 3/2 showed the highest catalytic activity,which could get 96.9%5-hydroxymethylfurfural conversion and 90.3%2,5-dihydroxymethylfuran selectivity.Further density functional theory calculation revealed that the synergistic effect between Pd0and Pd2+in Pd/g—C_(3)N_(4)—300 system could boost the adsorption of the substrate and the dissociation of hydrogen.In this work,we highlight the important correlation between metal oxidation state and catalytic activity,which provides valuable insights for the rational design of precious metal catalysts for hydrogenation reactions.
基金the National Natural Science Foundation of China(Nos.61973223,51972306)the Liao Ning Revitalization Talents Program(No.XLYC2007051)+2 种基金the Liaoning Educational Department Foundation(No.LJKMZ20220762,JYTMS20231510)the Natural Science Foundation of Liaoning Province(No.2023-MS-235,2023-MSLH-270)the Key Project in Science&Technology of SYUCT(No.2023DB005).
文摘Cu/ZnO is widely used in the hydrogenation of carbon dioxide (CO_(2)) to methanol (CH_(3)OH) to improve the lowconversion rate and selectivity generally observed. In this work, a series of In, Zr, Co, and Ni-doped CuO-ZnO catalysts wassynthesized via a hydrothermal method. By introducing a second metal element, the activity and dispersion of the activesites can be adjusted and the synergy between the metal and the carrier can be enhanced, forming an abundance of oxygenvacancies. Oxygen vacancies not only adsorb CO_(2) but also activate the intermediates in methanol synthesis, playing a keyrole in the entire reaction. Co3O4-CuO-ZnO had the best catalytic performance (a CO_(2) conversion rate of 9.17%;a CH_(3)OHselectivity of 92.77%). This study describes a typical strategy for multi-component doping to construct a catalyst with anabundance of oxygen vacancies, allowing more effective catalysis to synthesize CH_(3)OH from CO_(2).
基金financially supported by the National Natural Science Foundation of China(22172013)the Special Project for Key Research and Development Program of Xinjiang Autonomous Region(2022B01033-3)+3 种基金the Liaoning Revitalization Talent Program(XLYC2008032 and XLYC2203126)the Fundamental Research Funds for the Central Universities(DUT22LK24,DUT22QN207 and DUT22LAB602)the CUHK Research Startup Fund(No.#4930981)financial support from Catalyst:Seeding funding(CSG-VUW2201)provided by the New Zealand Ministry of Business,Innovation and Employment and administered by the Royal Society Aparangi。
文摘Indium oxide(In_(2)O_(3)),as a promising candidate for CO_(2)hydrogenation to C_(1) products,often suffers from sintering and activity decline,closely related to the undesirable structural evolution under reaction conditions.Based on the comprehension of the dynamic evolution,this study presents an efficient strategy to alleviate the agglomeration of In_(2)O_(3)nanoparticles by the surface decoration with highly dispersed silica species(SiO_(x)).Various structural characterizations combined with density functional theory calculations demonstrated that the sintering resulted from the over-reduction,while the enhanced stability originated from the anchoring effect of highly stable In-OSi bonds,which hinders the substantial formation of metallic In(In^(0))and the subsequent agglomeration.0.6Si/In_(2)O_(3)exhibited CO_(2)conversion rate of10.0 mmol g^(-1)h^(-1)at steady state vs.3.5 mmol g^(-1)h^(-1)on In_(2)O_(3)in CO_(2)hydrogenation.Enhanced steady-state activity was also achieved on Pd-modified catalysts.Compared to the traditional Pd/In_(2)O_(3)catalyst,the methanol production rate of Pd catalyst supported on 0.6Si/In_(2)O_(3)was enhanced by 23%,showing the potential of In_(2)O_(3)modified by SiO_(x)in serving as a platform material.This work provides a promising method to design new In_(2)O_(3)-based catalysts with improved activity and stability in CO_(2)hydrogenation.
基金the funding support from Shanghai Sailing Program (19YF1411000)National Natural Science Foundation of China (21878080, 21808058)Ningxia Science Foundation (2019AAC03282)。
文摘Production of light olefins from CO_(2), the primary greenhouse gases, is of great importance to mitigate the adverse effects of CO_(2) emission on environment and to supply the value-added products from nonpetroleum resource. However, development of robust catalyst with controllable selectivity and stability remains a challenge. Herein, we report that Zn-promoted Fe catalyst can boost the stable and selective production of light olefins from CO_(2). Specifically, the Zn-promoted Fe exhibits a highly stable activity and olefin selectivity over 200 h time-on-stream compared to the unpromoted Fe catalyst, primarily owing to the preservation of active χ-Fe_(5)C_(2) phase. Structural characterizations of the spent catalysts suggest that Zn substantially regulates the content of iron carbide on the surface and suppresses the reoxidation of bulk iron carbide during the reaction. DFT calculations confirm that adsorption of surface carbon atoms and graphene-like carbonaceous species are not thermochemically favored on Zn-promoted Fe catalyst. Carbon deposition by CAC coupling reactions of two surface carbon atoms and dehydrogenation of CH intermediate are also inhibited. Furthermore, the effects of Zn on antioxidation of iron carbide were also investigated. Zn favored the hydrogenation of surface adsorbed oxygen atoms to H_(2)O and the desorption of H_(2)O, which reduces the possibility of surface carbide being oxidized by the chemisorbed oxygen.
文摘The catalytic hydrogenation of D-glucose over a 3 wt% Ru/C catalyst was studied varying the operating conditions in mild conditions range to optimize the obtention of D-sorbitol. The stirring speed, temperature, pressure, and initial glucose concentration were varied between 250 - 700 rpm, 343 - 383 K, 0.5 - 2 MPa, and 0.033 - 0.133 M, respectively. To verify the absence of mass transport limitations, the diffusion of reagents in the gas-liquid interface, the liquid-solid interface, and the internal diffusion in the particles were evaluated. Under the operating conditions studied, the reaction rate showed an order with respect to H<sub>2</sub> of 0.586 and with respect to glucose of 0.406. The kinetic data were adjusted using 3 general models and 19 different sub-models based on Langmuir-Hinshelwood-Hougen-Watson (LHHW) kinetics. Model 3a was the best one interpreting the aqueous phase hydrogenation of glucose (both reagents competitively adsorbed on the catalyst). The H<sub>2</sub> adsorption is dissociative and the rate-limiting step is the surface chemical reaction.
基金the National Natural Science Foundation of China(21776215 and 21621004).
文摘Anthraquinone hydrogenation to produce H_(2)O_(2) is an economically interesting reaction with great industrial importance.Here,we report a series of Pd/xAl catalysts with different AlCl_(3) contents by a conventional stepwise impregnation method.The optimal Pd/1.0Al catalyst exhibits a higher performance toward anthraquinone hydrogenation with 8.3 g·L^(-1)hydrogenation efficiency,99.5%selectivity and good stability,obviously superior to that of Pd/Al_(2)O_(3) catalyst(5.2 g·L^(-1)and 97.2%).Detailed characterization demonstrates that AlCl_(3) can be grafted on the γ-Al_(2)O_(3) support to obtain a modified support with abundant surface weak acid and Lewis acid,which can adsorb and activate anthraquinone.Meanwhile,its steric hindrance could isolate and disperse active metals to form more active sites.The synergies between metal sites and acid sites promotes the anthraquinone hydrogenation.Furthermore,the good stability after grafting AlCl_(3) could attribute to the enhanced metal-support interaction inhibiting metal particles agglomeration and leaching.
