The Cf/SiC composites were prepared by precursor conversion-hot pressing sintering with AIN and Y2Os as additives. The effects of sintering temperature and additives on the microstructures and properties of the compos...The Cf/SiC composites were prepared by precursor conversion-hot pressing sintering with AIN and Y2Os as additives. The effects of sintering temperature and additives on the microstructures and properties of the composites were investigated. The composite sintered at as low as 1 75O℃ already showed higher density and better mechanical properties, which was mainly attributed to the liquid-phase-sintering and the formation of the AIN-SiC solid solution. With increasing the sintering temperature to 1 800 ℃, the flexural strength and fracture toughness of the composite were substantially improved up to 691. 6 MPa and 2O. 7 MPa’ m1/2 respectively in spite of the slightly elevated density, and the composite exhibited "tough" failure. Despite the improved density, the composite sintered at 1 85O℃ displayed brittle failure, which mainly attributed to the strongly bonded fiber/matrix interface and the degradation of the properties of the fibers.展开更多
The aim of this study was to develop a high-efficiency joining method of Cf/Al composites and TiA l alloys under the heat effect of laser-ignited self-propagating high-temperature synthesis（SHS）. The SHS reaction of...The aim of this study was to develop a high-efficiency joining method of Cf/Al composites and TiA l alloys under the heat effect of laser-ignited self-propagating high-temperature synthesis（SHS）. The SHS reaction of Ni–Al–Zr interlayer was induced by laser beam and acted as local high-temperature heat source during the joining. Sound joint was obtained and verified the feasibility of this joining method. Effect of filler metals on the joint microstructure and shear strength was evaluated. When the joining pressure was 2 MPa with additive filler metals, joint shear strength reached the maximum of 41.01 MPa.展开更多
Using liquid poly(methylvinyl)borosilazanes(PMVBSZ)as precursor,carbon fiber reinforced SiBCN matrix composites(C_f/SiBCN)were fabricated by a modified polymer infiltration and pyrolysis(PIP)process.With dicumyl perox...Using liquid poly(methylvinyl)borosilazanes(PMVBSZ)as precursor,carbon fiber reinforced SiBCN matrix composites(C_f/SiBCN)were fabricated by a modified polymer infiltration and pyrolysis(PIP)process.With dicumyl peroxide added as cross-linking agent,the PMVBSZ could be solidified at a low temperature of 120℃,leading to a high ceramic yield of～70%.The cross-linking mechanism and ceramization processes of the precursor were investigated in detail.Moreover,a modified infiltration technology was developed,which improved the efficiency and protected the precursor against moist air during PIP.Consequently,the obtained C_f/SiBCN composites had an oxygen content of around 1.22 wt%.Benefiting from the high ceramic yield and high efficiency of the modified PIP,C_f/SiBCN composites with an open porosity of～10%and uniform microstructure were obtained after only 7 cycles of PIP.The flexural strength and fracture toughness of the derived C_f/SiBCN composites were 371 MPa and 12.9 MPa·m^(1/2),respectively.This work provides a potential route for the fabrication of high performance C_f/SiBCN composites.展开更多
The carbon/carbon(C/C) composite was prepared by repeatedly overlapping the layers of 2D carbon cloths, and the 2D C_f/SiC composites were subsequently prepared in vacuum by a liquid silicon infiltration process. The ...The carbon/carbon(C/C) composite was prepared by repeatedly overlapping the layers of 2D carbon cloths, and the 2D C_f/SiC composites were subsequently prepared in vacuum by a liquid silicon infiltration process. The flexural strength of samples obtained under different preparation conditions was investigated. The results show that the composite has a better performance when the mass of silicon powder is 1.5 times greater than that of C/C composite, the temperature of silicon infiltration is 1550 ℃ and the holding time of silicon infiltration is 3 h. The density and flexural strength of the composite are 2.15 g/cm^3 and 128 MPa, respectively, and the thickness of the SiC layer is 12 μm.展开更多
文摘The Cf/SiC composites were prepared by precursor conversion-hot pressing sintering with AIN and Y2Os as additives. The effects of sintering temperature and additives on the microstructures and properties of the composites were investigated. The composite sintered at as low as 1 75O℃ already showed higher density and better mechanical properties, which was mainly attributed to the liquid-phase-sintering and the formation of the AIN-SiC solid solution. With increasing the sintering temperature to 1 800 ℃, the flexural strength and fracture toughness of the composite were substantially improved up to 691. 6 MPa and 2O. 7 MPa’ m1/2 respectively in spite of the slightly elevated density, and the composite exhibited "tough" failure. Despite the improved density, the composite sintered at 1 85O℃ displayed brittle failure, which mainly attributed to the strongly bonded fiber/matrix interface and the degradation of the properties of the fibers.
基金financially supported by the National Natural Science Foundation of China(Grant No.51075101)
文摘The aim of this study was to develop a high-efficiency joining method of Cf/Al composites and TiA l alloys under the heat effect of laser-ignited self-propagating high-temperature synthesis（SHS）. The SHS reaction of Ni–Al–Zr interlayer was induced by laser beam and acted as local high-temperature heat source during the joining. Sound joint was obtained and verified the feasibility of this joining method. Effect of filler metals on the joint microstructure and shear strength was evaluated. When the joining pressure was 2 MPa with additive filler metals, joint shear strength reached the maximum of 41.01 MPa.
基金financial supports from the National Key Research and Development Program of China (No. 2017YFB0703200) National Natural Science Foundation of China (No. 51702341)Chinese Academy of Sciences Innovative Funding (No. CXJJ-17-M169)
文摘Using liquid poly(methylvinyl)borosilazanes(PMVBSZ)as precursor,carbon fiber reinforced SiBCN matrix composites(C_f/SiBCN)were fabricated by a modified polymer infiltration and pyrolysis(PIP)process.With dicumyl peroxide added as cross-linking agent,the PMVBSZ could be solidified at a low temperature of 120℃,leading to a high ceramic yield of～70%.The cross-linking mechanism and ceramization processes of the precursor were investigated in detail.Moreover,a modified infiltration technology was developed,which improved the efficiency and protected the precursor against moist air during PIP.Consequently,the obtained C_f/SiBCN composites had an oxygen content of around 1.22 wt%.Benefiting from the high ceramic yield and high efficiency of the modified PIP,C_f/SiBCN composites with an open porosity of～10%and uniform microstructure were obtained after only 7 cycles of PIP.The flexural strength and fracture toughness of the derived C_f/SiBCN composites were 371 MPa and 12.9 MPa·m^(1/2),respectively.This work provides a potential route for the fabrication of high performance C_f/SiBCN composites.
文摘The carbon/carbon(C/C) composite was prepared by repeatedly overlapping the layers of 2D carbon cloths, and the 2D C_f/SiC composites were subsequently prepared in vacuum by a liquid silicon infiltration process. The flexural strength of samples obtained under different preparation conditions was investigated. The results show that the composite has a better performance when the mass of silicon powder is 1.5 times greater than that of C/C composite, the temperature of silicon infiltration is 1550 ℃ and the holding time of silicon infiltration is 3 h. The density and flexural strength of the composite are 2.15 g/cm^3 and 128 MPa, respectively, and the thickness of the SiC layer is 12 μm.
