Calcium-Magnesium Ca/Mg Ratios and Their Agronomic Implications for the Optimization of Phosphate Fertilization in Rainfed Rice Farming on Acidic Ferralsol in the Forest Zone of Ivory Coast

This study is a contribution to improving rice productivity on acidic plateau soils of the tropical rainforest zone. It is based on taking into account the cationic balances of the soil in order to optimize the phosphorus (P) nutrition of rice on these acidic soils, where this nutrient constitutes a limiting factor for agricultural production. Three (3) pot trials were conducted in Adiopodoumé in the forested south of Côte d’Ivoire. The interactive effects of calcium carbonate (0, 25, 50 and 75 kg Ca ha−1) and magnesium sulfate (0, 25, 50 and 75 kg Mg ha−1) were evaluated on the response of NERICA 5 rice at doses 0, 25, 50 and 75 kg P ha−1 of natural phosphate from Togo, applied only once at the start of the experiment. Additional fertilizers of nitrogen (N) (100 kg N ha−1) and potassium (K) (50 kg KCl ha−1) were added to each of the tests in a split-plot device. The test results revealed a paddy production potential of approximately 3 to 5 t⋅ha−1 for NERICA 5 on an acidic soil, under the effect of the interaction of P, Ca and Mg. The quadratic response of rice yield to the doses of these fertilizers would be more dependent on their balance, itself influenced by Ca nutrition. For the sustainability and maintenance of rice production in agro-ecology studied, it was recommended doses of 38 kg Ca ha−1, 34 kg Mg ha−1 in a Ca/Mg ratio (1/1) with intakes of 41 kg P ha−1, overall in a ratio 1/1/1 (P/Ca/Mg) more favorable to the availability of free iron considered a guiding element of mineral nutrition. Thus, these promising results should be confirmed in a real environment for better management of the fertilization of rice cultivated on acidic plateau soils in Côte d’Ivoire.

Enhancement of catalytic and anti-carbon deposition performance of SAPO-34/ZSM-5/quartz films in MTA reaction by Si/Al ratio regulation

In order to further improve the catalytic performance of zeolite catalyst for methanol to aromatics(MTA)technology, the double-tier SAPO-34/ZSM-5/quartz composite zeolite films were successfully synthesized via hydrothermal crystallization. The Si/Al ratio of SAPO-34 film was used as the only variable to study this material. The composite zeolite material with 0.6Si/Al ratio of SAPO-34 has the largest mesoporous specific surface area and the most suitable acid distribution. The catalytic performance for the MTA process showed that 0.6-SAPO-34/ZSM-5/quartz film has as high as 50.3% benzene-toluenexylene selectivity and 670 min lifetime. The MTA reaction is carried out through the path we designed to effectively avoid the hydrocarbon pool circulation of ZSM-5 zeolite, so as to improve the aromatics selectivity and inhibit the occurrence of deep side reactions to a great extent. The coke deposition behavior was monitored by thermogravimetric analysis and gas chromatograph/mass spectrometer, it is found that with the increase of Si/Al ratio, the active intermediates changed from low-substituted methylbenzene to high-substituted methylbenzene, which led to the rapid deactivation of the catalyst. This work provides a possibility to employ the synergy effect of composite zeolite film synthesizing anti-carbon deposition catalyst in MTA reaction.

High temperature oxidation of inoculated high Si/SiMo ductile cast irons in air and combustion atmospheres

The present work aims to investigate the effect of heating temperature(400,600 and 800°C)and inoculating elements(Ca,Ca-Ba,Ca-RE)on oxidation behavior of ductile irons containing 5.25%Si and 4.8%Si-2.3%Mo in dry air and combustion gas containing water vapour(natural gas burning).The oxidation is influenced by the gas atmosphere type,the iron alloying system,and the inoculating elements depending on the heating temperature.The weight gain increases from 0.001%-0.1%(400°C)to 0.05%-0.70%(600°C)and up to 0.10%-2.15%(800°C).No particular effects of the considered influencing factors are found when heating at 400°C,while at 600°C,mainly the oxidation gas atmosphere type shows a visible influence.At the highest heating temperature of 800°C,a limited increase of the weight gain is found for dry air atmosphere(up to 0.25%),but it drastically increases for combustion atmospheres(0.65%-2.15%).The water vapour presence in the combustion atmosphere is an important oxidising factor at 600-800°C.The alloying system appears to influence the oxidation behavior mainly at a heating temperature of 800°C in the combustion atmosphere,as evidenced by the lower weight gain in 5.25%silicon cast iron.Positive effects of inoculating elements increase with the heating temperature,with Ca and Ba-FeSi inoculation generally showing better performance.Irons inoculated with CaRE-FeSi exhibit a higher degree of oxidation.These results are in good relationship with the previous reported data:Ca-Ba-inoculation system appears to be better than simple Ca for improving the graphite parameters,while RE-bearing inoculant negatively affects the compactness degree of graphite particles in high-Si ductile irons.As the lower compactness degree is typical for graphite nodules in high-Si ductile irons,which negatively affects the oxidation resistance,it is necessary to employ specific metallurgical treatments to improve nodule quality.Inoculation,in particular,is a potential method to achieve this improvement.

Ca-Mg-Al-Si系高性能泡沫陶瓷的制备

通过对钢渣和菱镁矿配方组成的优化,采用高温发泡法制备的兼具高强度和低热导率的Ca-Mg-Al-Si系高性能泡沫陶瓷,其主要原料为红柱石与粉砂质页岩,发泡剂为碳化硅,助熔剂为锂辉石。在测试其气孔率,体积密度与抗折强度等性能的同时,也使用Micro-CT、SEM、XRD、XRF等检测手段对泡沫陶瓷进行了表征。实验结果显示:当样品中加入11 wt%钢渣,7 wt%菱镁矿时综合性能最佳,此时抗折强度为11.15 MPa,热导率为0.091W/(m·K),总气孔率为61.02%,闭口气孔率为55.30%,体积密度为0.944 g/cm^(3)。

压力下Mg_(2)Ca、Al_(2)Ca和Mg_(2)Si相稳定性的第一性原理研究

采用第一性原理的计算方法优化了施加0~50 GPa静水压力下Mg_(2)Ca、Al_(2)Ca和Mg_(2)Si相的晶胞结构,并计算了不同静水压力下Mg_(2)Ca、Al_(2)Ca和Mg_(2)Si相的弹性性能和电子结构,以此来研究静水压力对各相结构稳定性、弹性性能和电子结构的影响。结果表明:Mg_(2)Ca、Al_(2)Ca和Mg_(2)Si相的晶格常数随施加压力的增大而逐渐减小,并且降低的速率呈逐渐缓慢的趋势;逐渐施加静水压力后,Mg_(2)Ca、Al_(2)Ca和Mg_(2)Si相的体模量、剪切模量、杨氏模量、泊松比以及体模量/剪切模量的值均呈现了不同程度的增长态势,表明施加适当的静水压力可提高Mg_(2)Ca,Al_(2)Ca和Mg_(2)Si相的塑性和延展性,进而改善镁合金的力学性能。随着压力的增加,各相的结构没有发生相变,并且Mg_(2)Si的结构在静水压力下显现出稳定性最强的特性,Al_(2)Ca次之,Mg_(2)Ca相的稳定性在静水压力下逐渐变差。

Cu含量以及Cu/Mg比对Al-Si-Cu-Mg合金组织和力学性能的影响

研究了Cu含量和Cu/Mg比对Al-Si-Cu-Mg合金组织和力学性能的影响。结果表明Al-Si-Cu-Mg合金凝固组织是否形成Mg_(2)Si、Q-Al_(5)Cu_(2)Mg_(8)Si_(6)以及θ-Al_(2)Cu取决于Cu含量以及Cu/Mg比。当Cu/Mg比相对低时形成Mg_(2)Si中间相,而Cu/Mg比高时则倾向于生成Q-Al_(5)Cu_(2)Mg_(8)Si_(6)和θ-Al_(2)Cu相。当Cu/Mg比相同时,高Cu含量和高Mg含量都会促进Q相θ相的形成。通过观察T6热处理后的组织发现Cu含量以及Cu/Mg比控制了初生相的溶解以及析出相的形成,从而影响合金的强度与韧性。通过控制Cu含量及Cu/Mg比使Al-9Si-2Cu-0.5Mg合金中析出较少数量的初生相,再通过热处理析出大量的Q′强化相,使合金具有较高的强度和相对适中的伸长率。

Influence of Ca/P ratio on the catalytic performance of hydroxyapatite for decarboxylation of itaconic acid to methacrylic acid

Methacrylic acid,an important organic chemical,is commercially manufactured starting from fossil feedstock.The decarboxylation of itaconic acid derived for biomass is a green route to the synthesis of methacrylic acid.In view of the problems existing in the researches on this route such as use of noble metal catalyst,harsh reaction conditions and low desired-product yield,we prepared a series of hydroxyapatite catalysts with different Ca/P molar ratios and evaluated their catalytic performance.The results showed that the hydroxyapatite catalyst with a Ca/P molar ratio of 1.58 had the best catalytic activity.The highest yield of MAA up to 61.2%was achieved with basically complete conversion of itaconic acid under the suitable reaction conditions of 1 equivalent of NaOH,2 MPa of N_(2),250℃,and 2 h.On this basis,a reaction network for the decarboxylation of itaconic acid to methacrylic acid catalyzed by hydroxyapatite was established.With the aid of catalyst characterization using X-ray powder diffraction,NH3/CO2 temperature-programmed desorption,N_(2)physisorption,inductively coupled plasma optical emission spectrometry,and scanning electron microscopy,we found that the distribution of surface acid sites and basic sites,crystal growth orientation,texture properties and morphology of hydroxyapatite varied with the Ca/P molar ratio.Furthermore,the change of the crystal growth orientation and its influence on the surface acidity and alkalinity were clarified.

Ca/Si比对赤泥-固硫灰基免烧砖性能的影响研究

针对赤泥、固硫灰成分复杂、产量大等限制其难以有效利用的关键问题,提出以赤泥、固硫灰等固体废弃物为主要原料制备赤泥-固硫灰基免烧砖的技术研究。通过改变赤泥和固硫灰用量调节免烧砖的Ca/Si比,对其力学性能、耐久性能和微观结构进行分析。结果表明,随着Ca/Si比的增加,免烧砖的强度呈现先增加后减小的趋势,当Ca/Si比为1.2时,免烧砖强度最高值26.63 MPa,达到MU25标准,具有较好的力学性能;经过耐水测试和抗冻测试后强度损失较小,具有较好耐久性;免烧砖的水化产物为C-S-H凝胶、C-A-S-H凝胶和钙矾石,对强度的发展起积极的促进作用,促进了力学性能和耐久性能的提升。该研究为赤泥、固硫灰等固废的综合利用提供了新的思路。

Morphotype dependence of Globigerinoides ruber(white)and Trilobatus sacculifer Mg/Ca ratios in the western tropical Pacific:implications for reconstructing the mixed-layer depth

Planktonic foraminifer Globigerinoides ruber(white)and Trilobatus sacculifer are the most frequently used mixedlayer dwelling species for reconstructing past oceanic environments.Specifically,the Mg/Ca ratios of these two foraminiferal species have been used for reconstructing tropical/subtropical changes in sea surface temperature(SST).However,these two species have different morphotypes,of which the spatial and temporal differences in Mg/Ca ratios and their influencing factors are still unclear.Our objective is to investigate the potential differences between the Mg/Ca ratios of these different morphotypes of G.ruber(white)and T.sacculifer in the western Philippine Sea(WPS)and determine their implications for the reconstruction of SST and upper-ocean structure.Mg/Ca measurements are made on two basic morphotypes of G.ruber(white)[sensu stricto(s.s.)and sensu lato(s.l.)]and T.sacculifer[with(w)and without(w/o)a sac-like final chamber]on samples of Site MD06-3047B from the WPS.Our results reveal that Mg/Ca ratios of different G.ruber morphotypes show consistent differences;and those of T.sacculifer morphotypes show staged variations since MIS 3.It is suggested to select a single morphotype for reconstructing SST changes using the Mg/Ca ratios of G.ruber and T.sacculifer in the WPS.Furthermore,the Mg/Ca ratios between G.ruber s.s.and G.ruber s.l.[Δ(Mg/Ca)_(G.ruber s.s.-s.l.)]downcore MD06-3047B covaries with indexes of summer monsoon.Combining with the core-top results,showing regional variation of differences in theΔ(Mg/Ca)_(G.ruber s.s.-s.l.)over the western tropical Pacific,we propose thatΔ(Mg/Ca)_(G.ruber s.s.-s.l.)may tend to reflect summer mixed layer depth.

Mn/Fe比对Al-Mg-Si合金组织和性能的影响

以Al-Mg-Si合金为研究对象,采用金属型铸造研究Mn/Fe比对其组织和性能的影响。结果表明:Al-Mg-Si铸态合金组织中枝晶间存在α-Al基体和大量析出相,主要以Mg_(2)Si相为主,还存在少量的共晶Si相、AlFeSi相和Al(FeMn)Si相。随Mn/Fe比的增大,合金中的晶粒逐渐变得细小圆整,且由树枝晶向等轴晶发生转变。Mn可以促进铝合金中针状的β-AlFeSi相向骨骼状、颗粒状或块状的α-Al(FeMn)Si相的转变。当Mn/Fe比为0.5时,合金的热导率达到最大值181.08 W·m^(-1)·K^(-1)。当Mn/Fe比为1.0时,合金的晶粒尺寸最小且具有最佳的力学性能,抗拉强度、伸长率和硬度相较于Mn/Fe为0.2时分别提升17.45%、49.57%和27.48%,达到167.35 MPa、17.23%、HV 62.86。

Mg/Ca,Ba/Ca,and S/Ca ratios as environmental and growth proxies for bivalve shells from the Haima cold seep,South China Sea

Bivalve shell fossils,cemented by authigenic carbonates,are widely spread in the Haima cold seep,Qiongdongnan Basin of the South China Sea(SCS).In this study,we examined an element profile of Gigantidas platifrons in the Haima cold seeps at a water depth of 1381 m.Based on the scanning electron microscope(SEM)analyses,the prismatic layer and nacreous layer were identified,which are characterized by prismatic structure and stratified structure,respectively.In addition,the profile can be subdivided into two parts:altered and unaltered zones.Laser inductively coupled plasma mass spectrometry(LA-ICP-MS)mapping shows that the element concentrations of the altered zones were influenced by the authigenic carbonate rocks,whereas the element concentrations of unaltered zones remain stable.In-situ X-ray diffraction(XRD)analyses show that the mineral constituent of the prismatic layer is mainly composed of aragonite.Along with the growth profile,Mg/Ca ratios of unaltered zones have minor variations,ranging 0.72-0.97 mmol/mol(mean=0.87 mmol/mol),with estimated temperatures of 3.8-4.1℃,indicating that the temperature of the surrounding seawater remains constant and agree with the measured data of 3.9℃which was conducted by a conductivity-temperature-depth system(CTD).The minor variations of Ba/Ca ratios(0.01-0.06 mmol/mol;mean=0.04 mmol/mol)indicate a relatively stabilized salinity of the surrounding seawater.S/Ca ratios show large variations of 0.04-4.15 mmol/mol(mean=1.37 mmol/mol).S/Ca ratios have regular variations which generally correspond to the variations of the Mg/Ca ratios,highlighting that the S/Ca ratios of bivalve shells show the potential to reflect the growth rate of the Gigantides.However,further studies should be carried out on the understanding of the links between the S/Ca ratios and seepage intensity of cold-seep fluids.

Silica-alumina molar ratio and some factors effect on the synthesis of zeolites from fly ash

In order to improve the activity and eliminate some impurities, pretreatment was used before hydrothermal synthesis. The fly ash was mixed with an aqueous NaOH solution, the alkali melted fly ash was also adopted, which is hydrothermally treated at about 104 ℃, and the liquid/solid ratio was controlled at 6：1. In order to control Si/Al molar ratio, SiO2 or Al2O3 powers were added to the fly ash. The results of XRD and SEM show that the alkali melted can activate fly ash and eliminate its quartz and mullite, along with the improvement of Si/Al molar ratio and alkalinity. In addition, zeolite Na-A changes into sodalite gradually, and nepheline is the synthesized intermediate product. Those results were discussed on the basis of a formation mechanism of zeolite from fly ash.

Preliminary determination of calcium,phosphorus,and the calcium/phosphorus ratio in cortical bone of Chinstrap penguin using synchrotron X-ray fluorescence analysis

Synchrotron radiation X-ray fluorescence （SR-XRF） approach was applied to analyzing of Chinstrap penguin （ Pygoscelis Antarctica） cortical bone. The method enabled the in situ determination of Ca and P concentrations and the Ca/P ratio in cortical bone. The preliminary results show that ： （ 1 ） there is the bone site-related difference for Ca and P concentrations. The mean values for the investigated parameters （ on a dry-weight basis） are： 30.7% （Ca） and 14.9% （P） for the femoral cortical bone, 21.4% （Ca） and 11.5% （P） for wing cortical bone. （2） The variation for the Ca/P ratio in cortical bone is lower than those for Ca and P separately. This is in agreement with the previous report that the specificity of the Ca/P ratio is better than that of Ca and P concentrations and is more reliable for the diagnosis of bone disorders. The authors suggest that further studies be conducted to establish norreal values of Ca, P and Ca/P ratio for polar animals and provide a basis for the diagnosis of bone disorders.

Germanium/silica ratio and trace element composition of Early Cambrian siliceous rocks in Keping:implications for the siliceous rocks'formation and paleoenvironment interpretations

This study used the germanium/silica(Ge/Si)ratios,together with rare earth elements and other trace elements to infer the siliceous source and sedimentary environment of the siliceous rocks located at the bottom of Yuertusi Formation in Northwestern Tarim Basin,Keping,China.Previous studies have shown that this siliceous rock stratum formed at the edge of the carbonate platform on the continental shelf.Researchers suggest that these siliceous rocks were formed by hydrothermal activity,but some still draw different conclusions.Understanding the silicon source and depositional environment of these siliceous rocks would help us learn the processes of environmental changes and the causes of biological explosions during this period.The value of germanium/silica ratios of these siliceous rocks is from 0.15 to 0.37 pmol/mol and much lower than above 10|imol/mol values in siliceous rocks that are known formed by hydrothermal activity.All samples are rich in HREE,which differ from hydrothermal siliceous rocks that are rich in LREE.Most samples lack hydrothermal related elements.All these features show that the source of these siliceous rocks'siliceous is not hydrothermal flu ids.The samples'Ce/Ce*range from 0.88 to 1,and Th/U ratios range from 0.01 to 0.36.These features suggest these siliceous rocks were formed in an anoxic environment.Considering all the evidence,we conclude that the siliceous rock stratum at the bottom of the Lower Cambrian Yuertusi Formation in northwest Tarim Basin.Keping,was formed in anoxic seawater at the edge of the carbonate platform on the continental shelf.Its silicon source is seawater instead of hydrothermal fluid.

Study on Filtration Performance of Silica/ Alumina Slurry in the Process of Recycling Mother Liquor of NaY Zeolite

In order to recover the SiO_2 contained in the mother liquor in the course ofNaY zeolite synthesis to minimize pollution, the influence of various preparation conditions on thefiltering velocity of gel slurry was studied using the SiO_2/Al_2O_3 gel recovered from the NaYmother liquor in the laboratory. The results of study had shown that at a SiO_2/Al_2O_3 ratio in thefeed equating to 9∶1 the SiO_2 recovery rate and Al_2O_3 utilization rate were high with a fasterflow velocity of the filtrate. The pH value of the system had great impact on the flow velocity offiltrate. Between the two methods for regulating the pH value, the one for formation ofsilica/alumina gel slurry by addition of sulfuric acid prior to adding aluminium sulfate in thesolution could secure a faster filtration velocity. The filtration velocity was decreased in tandemwith increasing SiO_2 concentration in mother liquor, meanwhile an increase in dry filter cakeyield.

Er_(2)SiO_(5)纳米粉体的并流共沉淀法合成

以Er_(2)O_(3)和正硅酸乙酯(TEOS)为原料,采用并流共沉淀法合成了纳米Er_(2)SiO_(5)粉体。研究了前驱体Si/Er摩尔比、煅烧温度以及反应体系pH值对Er_(2)SiO_(5)物相组成和显微结构的影响,并探讨了Er_(2)SiO_(5)粉体的合成机理。结果表明:前驱体Er/Si摩尔比为20∶12,煅烧温度为1300℃时,Er_(2)SiO_(5)粉体由X2-Er_(2)SiO_(5)纯相组成,具有近球形形貌特征。低Er/Si摩尔比可降低Er_(2)SiO_(5)的结晶温度并促进X2-Er_(2)SiO_(5)的生成,反应体系pH值的升高则对[Si—O—Er]结构的生成具有一定的促进作用。Er_(2)SiO_(5)前驱体是以[Si—O—Er]网络结构形式存在的,煅烧过程中通过分解和结构重组逐步生成Er_(2)SiO_(5),Er_(2)O_(3)杂质相的生成是高Er/Si摩尔比前驱体[Si—O—Er]网络结构中的Er^(3+)在Er_(2)SiO_(5)结晶过程中的析出造成的。

Effect of the Si/Al ratio of HZSM-5 zeolite on the production of dimethyl ether before and after ultrasonication

A series of as-synthesized HZSM-5 zeolites with different Si/Al ratios(25,90,120,240 and 400)were post-treated by ultrasonication for an optimum time of 60 min.The morphology,acidity and textural properties of HZSM-5 were characterized with XRD,SEM,N_2 adsorption and NH3-TPD techniques.The catalytic performance was evaluated by dehydration of methanol to dimethyl ether(DME),which is a promising gaseous automotive fuel in future.It was found that the Si/Al ratio of HZSM-5 had considerable impacts on its catalytic performance for dehydration of methanol to DME.Its activity increased with decreasing Si/Al ratio from 400 to 25.Ultrasonication of HZSM-5 could significantly improve its catalytic performance.

硅和镁质量分数对Al-Si-Mg合金机械力学性能参数影响的计算分析

基于第一性原理,利用CASTEP模块,通过虚拟晶体近似的方法建模,采用GGA+PBE泛函关联函数,研究了Al-Si7-Mg X(X=0.1~0.5)、Al-Si X-Mg0.3(X=6~9)合金中的Si、Mg质量分数的变化对机械力学性能参数的影响。研究表明,随着研究组元质量分数的增加,晶格常数有所减小,最大值与最小值相差约0.265%;弹性常数C_(11)、C_(12)、C_(44)满足结构稳定性条件;体积模量B、剪切模量G、杨氏模量E、泊松比u随着A356中Si、Mg质量分数变化而变化;Mg质量分数的变化对剪切模量G、杨氏模量E的影响比Si质量分数的变化更敏感。计算结果与现有实验数据对比表明,计算结果接近实验数据,第一性原理计算Al-Si-Mg合金材料参数可行。

Regulative effect of Mg/Si ratio on microstructure evolution and mechanical properties of cast Al-Li-Mg-Si alloys

The effect of the Mg/Si ratio of Al-2.5Li-1Cu-0.8Mg-0.8Si,Al-2.5Li-1Cu-1.6Mg-0.8Si,and Al-2.5Li-1Cu-2.4Mg-0.8Si alloys on the microstructure evolution and mechanical properties was investigated.The results show that the primary phases and their morphologies in the as-cast alloys are found to vary with the Mg/Si ratio.The improvement of Mg/Si ratio of as-cast alloys promotes the formation of Mg_(2)Si primary phase at the expense of the AlLiSi primary phase.Moreover,a tiny amount of T_(B)-Al_(7.5)Cu_(4)Li phase transforms into S-Al_(2)CuMg phase with the increase of Mg content.In addition,the increase of Mg/Si ratio also causes the Cu-rich intergranular phase distributed along crystal boundary to Si-rich intergranular phase.After ageing treatment,the precipitation sequence as a function of Mg/Si ratio is as follows:δ/δ'+AlLiSi(Mg/Si is~1)→δ/δ'+β'-Mg_(2)Si+AlLiSi(Mg/Si is~2)→δ/δ'+β'-Mg_(2)Si(Mg/Si is~3).A good combination of strength and ductility can be obtained in Al-2.5Li-1Cu-2.4Mg-0.8Si alloy after solution and ageing.The rod-likeβ'-Mg_(2)Si precipitate has a positive influence on the comprehensive mechanical properties of the alloy.

NiSiCu合金产品质量异常分析

对非真空熔炼的NiSiCu合金产品质量异常原因进行分析。通过合金成分分析和性能检测及合金生产现场观察,发现合金中添加的Ni、Si元素的总量低、Ni/Si质量比不理想,导致了合金硬度偏低;另外,合金中的Fe元素等杂质含量偏高,降低了合金的导电率。实施改进措施后,生产的NiSiCu合金产品质量和合格率均得到较大的提高。