Preparation and Swelling Kinetic Analysis of Poly (HPMC-co-AA-co-AM) Super Absorbent Resin

Super absorbent resin(SAR)is prepared by aqueous high temperature polymerization using hydroxypropyl methylcellulose(HPMC)as monomer backbone material,acrylic acid(AA)and acrylamide(AM)as the graft copolymer monomer,potassium persulfate(KPS)as the initiator to generate free radicals,and N,N`-methylenebisacrylamide(MBA)as cross-linking agent for cross-linking reaction.Simutaneously,the influence of individual factors on the water absorption is investigated,and these factors are mainly AA,AM,KPS,MBA,HPMC,and reaction temperature.The optimized conditions are obtained by the experiment repeating for several times.The water absorption multiplicity and salt absorption multiplicity under the conditions are 782.4 and 132.5 g/g,respectivity.Furthermore,the effects of different temperatures and salt concentrations on its water absorption,as well as the swelling kinetics of SAR are studied.It is indicated the water-absorbing swelling process is mainly caused by the difference in water osmotic pressure and Na+concentration inside and outside the cross-linked molecular structure of the resin,which is not only consistent with the quasi-secondary kinetic model,but also with the Fick diffusion model.

Effect of the presence of trace sulfur dioxide on piperazine-based amine absorbents for carbon dioxide capture

The effect of the presence of trace SO_(2)in industrial flue gas on the amine-scrubbing-based absorption process for CO_(2)capture has been a matter of concern.This study aimed to investigate the effect of trace SO_(2)on the CO_(2)capture process using piperazine-based amine absorbents,focusing on SO_(2)-resistance capability,SO_(2)/CO_(2)absorption selectivity,and cyclic stability.The presence of trace SO_(2)not only restrains CO_(2)absorption,but also promotes the formation of carbamate within the piperazine-based amine absorbents.Remarkably,the incorporation of aminoethyl group in piperazine-based amine absorbents can enhance the SO_(2)-resistance capability by promoting the formation of carbamate,while piperazine-based amine absorbents with hydroxyethyl group can promote the formation of bicarbonate to reduce the SO_(2)-resistance capability.The work offers valuable insights into the efficient application of novel amine absorbents for CO_(2)capture from practical industrial flue gas.

Effects of Super Absorbent Polymers on Yield and Water-saving and Drought-escaping Mechanism in Spring Maize

The effects of super absorbent polymers （SAP） on yield as well as water-saving and drought-escaping mechanism in spring maize in the seasonal drought region were studied. As shown by the results, during the seasonal drought in southern China, SAP treatment promoted the soil moisture, improved the capability of absorption and transportation of roots, promoted physiological and biochemical functions, increased the chlorophyll content, photosynthetic rate and intercellular CO2 concentration, and reduced the stomatal conductance and transplre.tion rate. As a result, the economic characters of spring maize were improved, and the yield was increased.

Simultaneous desulfurization and denitrification of sintering flue gas via composite absorbent

Experiments on simultaneous absorption of SO_2 and NO_X from sintering flue gas via a composite absorbent NaClO_2/NaClO were carried out. The effects of various operating parameters such as NaClO_2 concentration(ms), NaClO concentration(mp), molar ratio of NaClO_2/NaClO(M), solution temperature(TR), initial solution pH, gas flow(Vg) and inlet concentration of SO_2(CS) and NO(CN) on the removal efficiencies of SO_2 and NO were discussed. The optimal experimental conditions were determined to be initial solution pH = 6, TR=55 °C and M = 1.3 under which the average efficiencies of desulfurization and denitrification could reach99.7% and 90.8%, respectively. Moreover, according to the analysis of reaction products, it was found that adding NaClO to NaClO_2 aqueous solution is favorable for the generation of ClO_2 and Cl_2 which have significant effect on desulfurization and denitrification. Finally, engineering experiments were performed and obtained good results demonstrating that this method is practicable and promising.

CO_2 absorption into a phase change absorbent: Water-lean potassium prolinate/ethanol solution

Phase change solvents are attractive energy-efficient absorbents for carbon dioxide(CO_2) capture due to CO_2-rich phase formation. Potassium prolinate + water + ethanol(ProK/W/Eth) solution has shown good capture characteristics as a promising one in our previous work. In this work, absorption rate of CO_2, solubility of N2 O,and heat of absorption for ProK/W/Eth solution were investigated using a stirred cell reactor and a CPA201 reaction calorimeter and these results were also compared with the aqueous ProK and 30 mass% MEA solutions.Using ethanol as a solvent can substantially increase the CO_2 physical solubility and the absorption rate of CO_2 in ProK/W/Eth solutions is far higher than that in aqueous 30 mass% MEA solutions especially at a low CO_2 loading range. Solid precipitation, obtained from the liquid-to-solid phase change absorption, was analyzed by13 C NMR and DSC-TGA. The enthalpy change for ProK/W/Eth solutions at various CO_2 loading was also discussed.

Promoting effect of super absorbent polymer on hydrate formation

The effect of super absorbent polymer（SAP） on the formation of tetrahydrofuran（THF） hydrate was studied by the successional cooling method.It was found that THF solution samples with 0.004 wt% and 0.03 wt% of SAP formed THF hydrate completely during the same cooling process.The corresponding induction time was 16-29 min,14-31 min,respectively,which was obviously shorter than that of THF solution samples without SAP（25-62 min）.It indicated that SAP accelerated the formation of THF hydrate.At the same time,the pictures of hydrate formation with and without SAP had been compared.It was found that SAP did not change the morphology of the hydrate.Finally,the mechanism of SAP promoting effect on the formation of THF hydrate was suggested.

Preparation and Characterization of Super Absorbent Resin from Natural Cellulose

The grafting polyacrylamide onto wood pulp cellulose (cell g PAM) was performed with cerous ammonium nitrate as the initiator and hydrolyzed to produce the super absorbent resin. The FTIR shows that the polyacrylamide is grafted on the cellulose. After hydrolyzation, part of acrylamino groups are transformed into carboxyl groups. The XRD analysis shows that the graft polymerization occurred at the amorphous section and the surface of the crystal section of cellulose. The SEM graph reveals that there is a layer of polymer on the surface of cellulose fiber and the fibril structure of the cellulose surface is covered. After hydrolyzation, the surface of the product is different from that of cell g PAM's and the surface is scraggy. The technical conditions to prepare high water absorbent resin were confirmed. Through the radical graft copolymerization, the high water absorbent resin can be produced from wood pulp cellulose.

Influence of absorbent on electromagnetic wave absorbing property of porous concrete

Influences of ferrite content and iron ore powder content on electromagnetic wave absorbing property of porous concrete are studied.The radar cross section(RSC)of samples was tested in a microwave anechoic chamber.Results show that the optimum content of ferrite is 15%,and the minimum,maximum and average reflectivity of the sample is-46.60 dB,-10.84 dB and-23.75 dB,respectively.And the sample's improved bandwidth is 8.2 GHz.The optimum content of iron ore powder is 20%,and the minimum,maximum and average reflectivity of the sample is-34.69 dB,-9.25 dB and-20.69 dB,respectively.And the sample's improved bandwidth is 6 GHz.In conclusion,appropriate ferrite and iron ore powder can improve wave absorbing property and widen wave absorption bandwidth of porous concrete.

A New CMC-AA Resin/Inorganic-gel Super Absorbent Material

A super absorbent material was prepared with the super absorbent resin （ SAR ） and inorganic gel. The SAR of the carboxymethyl cellulose grafting acrylic acid （ CMC-AA ） was copolymer synthesized using the method of inverse-phase suspension polymerization. The influences of the monomer concentration, neutralization degree, the initiator, dispersion agent, cross-linking agent, reaction and drying temperature on the grafting copolymer properties were examined. Meanwhlie, its properties was investigated and the model for absorption mechanism of this absorbent composite was proposed.

Thiol-functionalized MCM-48: an Effective Absorbent of Mercury Ions

Mercaptopropyl groups were grafted onto the pore walls of mesoporous molecular sieves MCM-48. The pore structures were characterized by powder X-ray diffraction and N2 adsorption analYSiS. Elemental analysis confirmed that the material with high organic moiety （2.2 mmol/g） had been obtained. ^13C MAS NMR verified the tethered organic groups. The thiol-functionalized MCM-48 showed effective capture of mercury ions, and all of the organic ligands were accessible for the binding of mercury ions.

Preparation of Superabsorbent Polymers with Increased Saline Absorbency

Superabsorbent having enhanced absorbency of 0.9%NaCl solution was synthesized on one basis of incorporating zwitterionic (sulfobetaine) monomer into the previous monomer mixture, which comprises ionic (AA) and nonionic monomers, and another basis of introducing inorganic salt B. As far as saline absorbency is concerned, introduction of inorganic salt B is more useful than the sulfobetaine monomer.

A Study on Nanoscale Infrared Absorbent Working in Waveband Range of 1300-400 cm^(-1)

Nanoscale powder of SiO2/Al2O3/TiO2 composite was prepared by sol-gel method. Microstructure and morphology of the obtained samples were characterized by infrared （IR）, X-ray diffraction （XRD） analysis and transmission electron microscopy （TEM）. It is proved that infrared absorbing peaks of the samples are in waveband range of 1300-400 cm^-1, and the peak shape changes with their component. Mechanism of the infrared peak＇s positions and shapes which changes with the size and morphology of the prepared nano-particles has been tentatively discussed.

Preparation of Liquor Flavoring from Yellow Water Based on Water Absorbent Resin

[Objective] This study was conducted to extract the scarce natural liquor flavorings desired by many liquor factories from yellow water. [Method] Strong water absorbent resin was used to absorb moisture from the yellow water in order to concentrate it into dense yellow water at first, followed by azcotropic dis- tillation of the previously concentrated yellow water, and then, catalytic esterification was performed to the remaining liquid after the distillation. [ Results] The 7. 066 7 fractions of concentrated yellow water with 56.7% ethanol could be obtained after the treatment of 100 fractions of yellow water with strong water absorbent resin. Azeotrope of 0.432 8 fraction of natural acetaldehyde, 0. 269 4 fraction of ethyl formate and methyl alcohol, 0. 975 0 fraction of ethyl acetate and methyl alco- hol could be obtained after the azeotropic distillation per 100 fractions of concentrated yellow water. After the addition of CaC12, O. 220 7 fraction of ethyl formate and 0. 514 2 fraction of ethyl acetate could be obtained after distillation of the azeotrope. Finally, 92. 094 8 fractions of esterification liquid with 38 kinds of flavor- ing compound could be obtained after catalytic esterification of 100 fractions of concentrated yellow water, and the content of ethyl acetate, ethyl propionate, ethyl- butyrate, ethyl valerate, ethyl lactate and ethyl bexanoate were as much as 142.9, 22.2, 54.2, 3.3,75.4 and 158.9 g/L, respectively. [ Conclusion] Top-grade Luzhou-flavor liquor could be made by mixing 6.5 fractions of common liquor with acetaldehyde, ethyl formate, ethyl acetate and esterification liquid which were ob- tained from 1 fraction of yellow water. Therefore, the yellow water has a great recycling value, and it tells us that the technique of extracting liquor flavorings from yellow water has tremendous market value.

Absorption Capability Comparison of Two Kinds of Super Absorbent Resins from Carboxymethyl Cellulose

The two kinds of super absorbent resins from carboxymethyl cellulose were synthesized with the potassium persulphate and methylenebisacrylamide as initiator and cross linker respectively by radical polymerization in aqueous solution. Thestructures of the two resins were characterized with Fourier transform infrared spectroscopy FTIR, scanning electron miscroscopy （SEM）, and environment scanning electron miscroscopy （ESEM）, the results indicate that the fibriform of the carboxymethyl cellulose （CMC） is disappeared and the crusslink networks in eopolymer of carboxymethyl cellulose-graft-polyacrylic acid（CMC-g-PAA） are denser than that of eopolymer of carboxymethyl cellulose-graft-poly （acrylic acid-co-N-vinyl Pyrrolidone） （CMC-g- PAA-co-PVP）. The comparison between the two resins in absorption capacities is that CMC-g-PAA is better in the water-keep capability being heated, while CMC-g-PAA-co-PVP is better in the water absorbency and salt resistance.

Review: Silica Aerogel as a Viable Absorbent for Oil Spill Remediation

The review article reflects on the potential of silica aerogel as viable absorbents for spilled crude oil. Reported oil absorption capacity of silica aerogel shows it has a future in polluted site clean-up. The review presents the various dynamics of oil spill, conventional clean-up technologies and silica aerogel synthesis techniques. It also highlights some investigations of oil spill sorption using aerogels. The future prospect of rice husk as a cheaper source silica aerogel is also considered.

Superabsorbent Capability and High Retention Ability of China Clay(Kaolinite)/Polyacrylic Acid Composites for Aqueous Solution

Majority of superabsorbent polymers (SAPs) yet reported either have low gel strength or high production cost. Therefore, we synthesized a novel polyacrylic acid-grafted China clay (Kaolinite) super-absorbent polymer composite (SAPC) with high thermal stability, low cost of production and superior sorption and retention capability for water and salt solution. The resulting SAPCs were extensively characterized and analysed by X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Results suggested that the composites were thermally stable. Water absorbency increased with increase of clay content up to 45%, while further increase in clay content decreased the water absorbency. Percentage of acrylic acid (AA) and clay by weight shows the optimum absorbency in 35% and 40% respectively. Crosslinker and initiator contents were optimized to be 0.5% and 0.3% by weight respectively. The resulting polymer composite showed high water absorbency of about 785 g/g and 103 g/g of 1% NaCl solution with above 90% retention ability at 50 oC.

The effect of membrane pores wettability on CO_2 removal from CO_2/CH_4 gaseous mixture using NaOH, MEA and TEA liquid absorbents in hollow fiber membrane contactor

The present paper renders a modeling and a 2D numerical simulation for the removal of CO_2from CO_2/CH_4gaseous stream utilizing sodium hydroxide(NaOH),monoethanolamine(MEA)and triethanolamine(TEA)liquid absorbents inside the hollow fiber membrane contactor.Counter-current arrangement of absorbing agents and CO_2/CH_4gaseous mixture flows are implemented in the modeling and numerical simulation.Non-wetting and partial wetting modes of operation are considered where in the partial wetting mode,CO_2/CH_4gaseous mixture and liquid absorbents fill the membrane pores.The deteriorated removal of CO_2in the partial wetting mode of operation is mainly due to the mass transfer resistance imposed by the liquid in the pores of membrane.The validation of numerical simulation is done based on the comparison of simulation results of CO_2removal using Na OH and experimental data under non-wetting mode of operation.The comparison illustrates a desirable agreement with an average deviation of less than 5%.According to the results,MEA provides higher efficiency for CO_2removal in comparison with the other liquid absorbents.The order for CO_2removal performance is MEAN Na OHN TEA.The influence of non-wetting and partial wetting modes of operation on CO_2removal are evaluated in this article as one of the novelties.Besides,the percentage of CO_2sequestration as a function of gas velocity for various percentages of membrane pores wetting ranging from 0(non-wetting mode of operation)to 100%(complete wetting mode of operation)is studied in this research paper,which can be proposed as the other novelty.The results indicate that increase in some operational parameters such as module length,membrane porosity and absorbents concentration encourage the removal percentage of CO_2from CO_2/CH_4gaseous mixture while increasing in membrane tortuosity,gas velocity and initial CO_2concentration has unfavorable influence on the separation efficiency of CO_2.

Multiphase Interfacial Regulation Based on Hierarchical Porous Molybdenum Selenide to Build Anticorrosive and Multiband Tailorable Absorbers

Electromagnetic wave(EMW)absorbing materials have an irreplaceable position in the field of military stealth as well as in the field of electromagnetic pollution control.And in order to cope with the complex electromagnetic environment,the design of multifunctional and multiband high efficiency EMW absorbers remains a tremendous challenge.In this work,we designed a three-dimensional porous structure via the salt melt synthesis strategy to optimize the impedance matching of the absorber.Also,through interfacial engineering,a molybdenum carbide transition layer was introduced between the molybdenum selenide nanoparticles and the three-dimensional porous carbon matrix to improve the absorption behavior of the absorber.The analysis indicates that the number and components of the heterogeneous interfaces have a significant impact on the EMW absorption performance of the absorber due to mechanisms such as interfacial polarization and conduction loss introduced by interfacial engineering.Wherein,the prepared MoSe_(2)/MoC/PNC composites showed excellent EMW absorption performance in C,X,and Ku bands,especially exhibiting a reflection loss of−59.09 dB and an effective absorption bandwidth of 6.96 GHz at 1.9 mm.The coordination between structure and components endows the absorber with strong absorption,broad bandwidth,thin thickness,and multi-frequency absorption characteristics.Remarkably,it can effectively reinforce the marine anticorrosion property of the epoxy resin coating on Q235 steel substrate.This study contributes to a deeper understanding of the relationship between interfacial engineering and the performance of EMW absorbers,and provides a reference for the design of multifunctional,multiband EMW absorption materials.

Characteristics and Performance of Novel Water-Absorbent Slow Release Nitrogen Fertilizers

In this article, a research on the characteristics and performance of water-absorbent slow release nitrogen fertilizer （WASRNF） using infrared spectroscopy （IR）, scanning electronic microscopy （SEM）, differential scanning calorimetry （DSC）, and thermogravimetry analysis （TGA）, was present. The results indicate that the water absorbency and nitrogen analysis of WASRNF is 103 g g^-1 and 30%, respectively, and WASRNF exhibits approximately neutral pH and very low salt index. WASRNF is a copolymer of nitrogen fertilizer and super absorbent polymer （SAP） monomers which is formed through hydrogen bond interaction, and the molecule contains hydrophilic groups, which is responsible for the absorption and water retention capacity of the molecule. WASRNF is a gel that exhibits the ability to swell, but does not dissolve in water. WASRNF shows non-homogenous nature as a whole, but in local zone it is homogenous, the copolymer molecule shows chain network that is the physical structure responsible for absorption and retention of water in WASRNF. The water retained in WASRNF exists as free and nonfreezing bound and freezing bound water states, with the free and the nonfreezing water accounting for more than 95% of water retained in WASRNF, and the nonfreezing bound water for less than 5%. WASRNF functions in delaying the release of nitrogen from it, thereby serving a novel slow release nitrogenous fertilizer.

PREPARATION AND SWELLING PROPERTIES OF SUPER-ABSORBENT POLYMER

A super-absorbent polymer is prepared by graft polymerizing acrylamide (AM) onto potato starch using eerie ammonium nitrate (CAN) and N, N'-methylene-bis-acrylamide (bisAM) as an initiator and cross-linking agent respectively, and then subjecting the potato starch- poly(acrylamide) (PAM) graft copolymer (SPAM) to alkaline saponification. The water absorbency (WA) of the sample is nearly 5000 g H2O/g for dry sample in 24 h at room temperature and is far larger than that of reported in the literature([1]). The variables affecting the WA were investigated and optimiz;ed, they were: concentrations of potato starch, AM, CAN and bisAM were 26.3 g/L, 1.14 mol/L, 10.3 mmol/L and 0.53 mmol/L, respectively. The amount of sodium hydroxide was 15 g and the temperatures of graft copolymerization and saponification reactions were 60 degrees C and 95 degrees C. The time of graft copolymerization and saponification reactions was 2 h, respectively.