Composite Portland cement （PC） played an important role in various kinds of construction engineering owing to low hydration heat,low-cost,and application of solid industrial waste,but its brittleness and low strengt...Composite Portland cement （PC） played an important role in various kinds of construction engineering owing to low hydration heat,low-cost,and application of solid industrial waste,but its brittleness and low strength limited its use in stress-bearing locations.The aim of this study is to improve the toughness and fracture resistance by incorporating CaCO3 whisker in cement matrix.Effect of different content of calcium carbonate whiskers on the mechanical properties of PC was investigated.The results showed that the flexural strength,impact strength and split tensile strength were increased by 39.7%,39.25% and 36.34% at maximum,respectively.Microstructure and elements of the whiskers in hardened cement were observed and analyzed by SEM/EDS.The mechanisms of the reinforcement of CaCO3 whisker on cement were also discussed,and the conclusion was that the improvement could be correlated to energy-dissipating processes owing to crack bridging,crack deflection,and whisker pull-out at the crack tips.展开更多
The mechanical and tribological properties of polyetheretherketone （PEEK） composites filled with CaCO3 whisker in various content of 0～45% （wt pct） were investigated. The composite specimens were prepared by comp...The mechanical and tribological properties of polyetheretherketone （PEEK） composites filled with CaCO3 whisker in various content of 0～45% （wt pct） were investigated. The composite specimens were prepared by compression molding. Tribological testing of composites in dry wear mode against carbon steel ring was carried out on a MM200 block-on-ring apparatus. Data on neat PEEK were also included for comparison. It was observed that inclusion of CaCO3 whisker affected the most mechanical properties and the friction and wear in a beneficial way. With an increase in CaCO3 whisker content, friction coefficient continuously decreased but the trends in wear performance varied. The specific wear rate showed minima as 1.28×10^-6 mm^3/Nm for 25% CaCO3 whisker inclusion followed by a slow increase for further CaCO3 whisker addition. In terms of friction applications, when the tribological and mechanical properties are combined, the optimal content of CaCO3 whisker in the filled PEEK should be recommended as 15% to 20%. Fairly good correlations are observed in friction coefficient vs bending modulus and wear rate vs bending strength, confirming that the bending properties prove to be the most important tribology controlling parameters in the present work.展开更多
Mineral carbonation is a promising CO_(2) sequestration strategy that can utilize industrial wastes to convert CO_(2) into high-value CaCO_(3).This review summarizes the advancements in CO_(2) mineralization using typ...Mineral carbonation is a promising CO_(2) sequestration strategy that can utilize industrial wastes to convert CO_(2) into high-value CaCO_(3).This review summarizes the advancements in CO_(2) mineralization using typical industrial wastes to prepare ultrafine CaCO_(3).This work surveys the mechanisms of CO_(2) mineralization using these wastes and its capacities to synthesize CaCO_(3),evaluates the effects of carbonation pathways and operating parameters on the preparation of CaCO_(3),analyzes the current industrial application status and economics of this technology.Due to the large amount of impurities in solid wastes,the purity of CaCO_(3) prepared by indirect methods is greater than that prepared by direct methods.Crystalline CaCO_(3) includes three polymorphs.The polymorph of CaCO_(3) synthesized by carbonation process is determined the combined effects of various factors.These parameters essentially impact the nucleation and growth of CaCO_(3) by altering the CO_(2) supersaturation in the reaction system and the surface energy of CaCO_(3) grains.Increasing the initial pH of the solution and the CO_(2)flow rate favors the formation of vaterite,but calcite is formed under excessively high pH.Vaterite formation is favored at lower temperatures and residence time.With increased temperature and prolonged residence time,it passes through aragonite metastable phase and eventually transforms into calcite.Moreover,polymorph modifiers can decrease the surface energy of CaCO_(3) grains,facilitating the synthesis of vaterite.However,the large-scale application of this technology still faces many problems,including high costs,high energy consumption,low calcium leaching rate,low carbonation efficiency,and low product yield.Therefore,it is necessary to investigate ways to accelerate carbonation,optimize operating parameters,develop cost-effective agents,and understand the kinetics of CaCO_(3) nucleation and crystallization to obtain products with specific crystal forms.Furthermore,more studies on life cycle assessment(LCA)should be conducted to fully confirm the feasibility of the developed technologies.展开更多
Ancient cultural relics built of red sandstone have high historical value.However,due to the acceleration of the industrialization process of human civilization,increasingly frequent acid rain has caused irreversible ...Ancient cultural relics built of red sandstone have high historical value.However,due to the acceleration of the industrialization process of human civilization,increasingly frequent acid rain has caused irreversible damage to the surface of red sandstone artifacts.In this research,a fluor-silane modified nano-calcium carbonate(CaCO_(3))was prepared as a biomimetic hydrophobic coating for the conservation of red sandstone inspired by the lotus leaf effect.Characterizations and immersion tests were carried out to assess the protective properties of the coating.XRD,FT-IR,TEM and SEM were combined to characterize the morphology of the coating.In addition,the water contact angle was measured before and after immersion in the simulated acid rain.The results indicate that this kind of hydrophobic nano-CaCO_(3)coating effectively protected the sandstone from the deleterious effects of acid rain.展开更多
文摘Composite Portland cement （PC） played an important role in various kinds of construction engineering owing to low hydration heat,low-cost,and application of solid industrial waste,but its brittleness and low strength limited its use in stress-bearing locations.The aim of this study is to improve the toughness and fracture resistance by incorporating CaCO3 whisker in cement matrix.Effect of different content of calcium carbonate whiskers on the mechanical properties of PC was investigated.The results showed that the flexural strength,impact strength and split tensile strength were increased by 39.7%,39.25% and 36.34% at maximum,respectively.Microstructure and elements of the whiskers in hardened cement were observed and analyzed by SEM/EDS.The mechanisms of the reinforcement of CaCO3 whisker on cement were also discussed,and the conclusion was that the improvement could be correlated to energy-dissipating processes owing to crack bridging,crack deflection,and whisker pull-out at the crack tips.
文摘The mechanical and tribological properties of polyetheretherketone （PEEK） composites filled with CaCO3 whisker in various content of 0～45% （wt pct） were investigated. The composite specimens were prepared by compression molding. Tribological testing of composites in dry wear mode against carbon steel ring was carried out on a MM200 block-on-ring apparatus. Data on neat PEEK were also included for comparison. It was observed that inclusion of CaCO3 whisker affected the most mechanical properties and the friction and wear in a beneficial way. With an increase in CaCO3 whisker content, friction coefficient continuously decreased but the trends in wear performance varied. The specific wear rate showed minima as 1.28×10^-6 mm^3/Nm for 25% CaCO3 whisker inclusion followed by a slow increase for further CaCO3 whisker addition. In terms of friction applications, when the tribological and mechanical properties are combined, the optimal content of CaCO3 whisker in the filled PEEK should be recommended as 15% to 20%. Fairly good correlations are observed in friction coefficient vs bending modulus and wear rate vs bending strength, confirming that the bending properties prove to be the most important tribology controlling parameters in the present work.
基金support was received the Science&Technology Foundation of RIPP(PR20230092,PR20230259)the National Natural Science Foundation of China(22278419)the Key Core Technology Research(Social Development)Foundation of Suzhou(2023ss06).
文摘Mineral carbonation is a promising CO_(2) sequestration strategy that can utilize industrial wastes to convert CO_(2) into high-value CaCO_(3).This review summarizes the advancements in CO_(2) mineralization using typical industrial wastes to prepare ultrafine CaCO_(3).This work surveys the mechanisms of CO_(2) mineralization using these wastes and its capacities to synthesize CaCO_(3),evaluates the effects of carbonation pathways and operating parameters on the preparation of CaCO_(3),analyzes the current industrial application status and economics of this technology.Due to the large amount of impurities in solid wastes,the purity of CaCO_(3) prepared by indirect methods is greater than that prepared by direct methods.Crystalline CaCO_(3) includes three polymorphs.The polymorph of CaCO_(3) synthesized by carbonation process is determined the combined effects of various factors.These parameters essentially impact the nucleation and growth of CaCO_(3) by altering the CO_(2) supersaturation in the reaction system and the surface energy of CaCO_(3) grains.Increasing the initial pH of the solution and the CO_(2)flow rate favors the formation of vaterite,but calcite is formed under excessively high pH.Vaterite formation is favored at lower temperatures and residence time.With increased temperature and prolonged residence time,it passes through aragonite metastable phase and eventually transforms into calcite.Moreover,polymorph modifiers can decrease the surface energy of CaCO_(3) grains,facilitating the synthesis of vaterite.However,the large-scale application of this technology still faces many problems,including high costs,high energy consumption,low calcium leaching rate,low carbonation efficiency,and low product yield.Therefore,it is necessary to investigate ways to accelerate carbonation,optimize operating parameters,develop cost-effective agents,and understand the kinetics of CaCO_(3) nucleation and crystallization to obtain products with specific crystal forms.Furthermore,more studies on life cycle assessment(LCA)should be conducted to fully confirm the feasibility of the developed technologies.
基金support from the National Key Research and Development Program of China(No.2021YFB3701100)the Natural Science Foundation Commission of China(Grant No.U20A20234 and 51874062)+1 种基金Chongqing Foundation and Advanced Research Project(Grant No.cstc2019jcyj-zdxmX0010)the Science and Technology Major Project of Shanxi Province(No.20191102008).
文摘Ancient cultural relics built of red sandstone have high historical value.However,due to the acceleration of the industrialization process of human civilization,increasingly frequent acid rain has caused irreversible damage to the surface of red sandstone artifacts.In this research,a fluor-silane modified nano-calcium carbonate(CaCO_(3))was prepared as a biomimetic hydrophobic coating for the conservation of red sandstone inspired by the lotus leaf effect.Characterizations and immersion tests were carried out to assess the protective properties of the coating.XRD,FT-IR,TEM and SEM were combined to characterize the morphology of the coating.In addition,the water contact angle was measured before and after immersion in the simulated acid rain.The results indicate that this kind of hydrophobic nano-CaCO_(3)coating effectively protected the sandstone from the deleterious effects of acid rain.
