By using an Ar+ ion laser, a tunable Rh 6G dye laser(Linewidth: 0.5 cm -1) and a Coherent 899-21 dye laser as light sources and using a monochromator and a phase-locking amplifier, the optical properties of Eu 3+∶Y_2...By using an Ar+ ion laser, a tunable Rh 6G dye laser(Linewidth: 0.5 cm -1) and a Coherent 899-21 dye laser as light sources and using a monochromator and a phase-locking amplifier, the optical properties of Eu 3+∶Y_2SiO_5 crystal were detected. Persistent spectral hole burning (PSHB) were also observed in 5D_0-7F_0 transition in the crystal at the temperature of 16 K. For 15 mW dye laser (Wavelength: 579.62 nm) burning the crystal for 0.1 s a spectral hole with about 80 MHz hole width were detected and the hole can been keep for longer than 10 h.展开更多
By using a whitelight lamp, an Ar+ ion laser whosewavelength was tuned to 457. 9 nmand a tunable Rh 6G dye laser(linewidth: 0. 5 cm-1) pumped bythe second harmonic of a Nd: YAGlaser as light sources and using amonochr...By using a whitelight lamp, an Ar+ ion laser whosewavelength was tuned to 457. 9 nmand a tunable Rh 6G dye laser(linewidth: 0. 5 cm-1) pumped bythe second harmonic of a Nd: YAGlaser as light sources and using amonochromator, a phase-lockingamplifier and a computer as the data detecting system, the transmission spectrum, fluorescence spectra, excitation spectrum and siteselective fluorescence spectra ofthe Eu3+: Y2SiO5 crystal were observed. More than thirty out of thetotal fifty spectral lines were observed for 5D0→7F0,1,2,3,4 transitions. The Eu3+ ions occupy twokinds of the Y3+ sites with the lowsymmetry in this crystal. The difference of the wavelengths of thetwo Eu3+ sites for 7F0→5D0 transition is about 0. 2 nm. It was foundthat the two sites were nonequivalent optical ones at room temperature. Crystal lattice constants a,b, c, and β of Eu3+: Y2SiO5 werealso measured by the X-ray diffraction method. The results show thatthe lattice constants a, b, and cof the crystal doped Eu3+ ions isvery close to those of the Y2SiO5crystal undoped Eu3+ ions.展开更多
文章主要研究了Y_(2)SiO_(5):Pr^(3+)上转换纳米荧光粉对ZnO:Pr^(3+)的光催化性能的影响,通过XRD、FE-SEM、FL和UV-Vis对样品的物相、形貌、发光性能和光催化行性能进行了分析表征,实验结果表明:随着Y_(2)SiO_(5):Pr^(3+)上转换纳米荧...文章主要研究了Y_(2)SiO_(5):Pr^(3+)上转换纳米荧光粉对ZnO:Pr^(3+)的光催化性能的影响,通过XRD、FE-SEM、FL和UV-Vis对样品的物相、形貌、发光性能和光催化行性能进行了分析表征,实验结果表明:随着Y_(2)SiO_(5):Pr^(3+)上转换纳米荧光粉的加入量增加,ZnO:Pr^(3+)光催化效率逐渐提高,当加入0.2 g Y_(2)SiO_(5):Pr^(3+)时,光催化效率最高,在光照60 min后对亚甲基蓝的降解率达到了98.11%,相比未加入Y_(2)SiO_(5):Pr^(3+)时的光催化效率有显著提升。展开更多
A method to upgrade the iron grade in copper slag was proposed using lime to decompose Al_(2)O_(3)-containing fayalite melt(AFMT).Thermodynamic calculations indicated that adjusting the CaO/AFMT ratio can yield a resi...A method to upgrade the iron grade in copper slag was proposed using lime to decompose Al_(2)O_(3)-containing fayalite melt(AFMT).Thermodynamic calculations indicated that adjusting the CaO/AFMT ratio can yield a residual melt with a FeO concentration of 75−88 wt.%and produce Ca_(2)SiO_(4).In-situ observations suggested that the reaction was impeded in some way.Quenching experiments revealed that the initial reaction products consisted of calcium ferrite compounds and FeO−CaO melt.At the FeO−CaO melt/AFMT interface,Ca_(2)SiO_(4) particles precipitated,forming a dense Ca_(2)SiO_(4) film that significantly impeded mass transfer.Although trace amounts of Al_(2)O_(3) in AFMT temporarily enhanced mass transfer,they were insufficient to overcome this retardation effect.The decomposition reaction was far from achieving equilibrium,demonstrating a self-retardation effect.Measures must be implemented to eliminate this self-retardation effect and enhance the efficiency of reaction kinetics.展开更多
A series of SAPO-34 molecular sieves with different SiO_(2)/Al_(2)O_(3)ratios have been synthesized for the methanol-to-olefin(MTO)reaction.Their physico-chemical properties are characterized by various techniques suc...A series of SAPO-34 molecular sieves with different SiO_(2)/Al_(2)O_(3)ratios have been synthesized for the methanol-to-olefin(MTO)reaction.Their physico-chemical properties are characterized by various techniques such as X-ray diffraction(XRD),scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),Fourier transform infrared spectroscopy(FT-IR)and N2 adsorption-desorption.The results are compared with those of the commercial HZSM-5,which show that the crystallinity and particle diameter of SAPO-34 as well as HZSM-5 increase with SiO_(2)/Al_(2)O_(3)ratio.The variation of BET surface area of SAPO-34 is different from that of HZSM-5 and the sample with SiO_(2)/Al_(2)O_(3)ratio of 0.4 exhibits the highest BET surface area.FT-IR spectra indicate that HZSM-5 has both Brǿnsted and Lewis acid sites and Brǿnsted acid sites are stronger,whereas SAPO-34 samples are dominated only by Lewis acid sites.When the SiO_(2)/Al_(2)O_(3)ratio increases,propylene and butylenes become the predominant product of the MTO reaction over HZSM-5.In contrast,the main products of this reaction catalyzed by SAPO-34 are ethylene and propylene.According to the product distribution,the reaction mechanism over HZSM-5 catalysts is proposed.展开更多
文摘By using an Ar+ ion laser, a tunable Rh 6G dye laser(Linewidth: 0.5 cm -1) and a Coherent 899-21 dye laser as light sources and using a monochromator and a phase-locking amplifier, the optical properties of Eu 3+∶Y_2SiO_5 crystal were detected. Persistent spectral hole burning (PSHB) were also observed in 5D_0-7F_0 transition in the crystal at the temperature of 16 K. For 15 mW dye laser (Wavelength: 579.62 nm) burning the crystal for 0.1 s a spectral hole with about 80 MHz hole width were detected and the hole can been keep for longer than 10 h.
文摘By using a whitelight lamp, an Ar+ ion laser whosewavelength was tuned to 457. 9 nmand a tunable Rh 6G dye laser(linewidth: 0. 5 cm-1) pumped bythe second harmonic of a Nd: YAGlaser as light sources and using amonochromator, a phase-lockingamplifier and a computer as the data detecting system, the transmission spectrum, fluorescence spectra, excitation spectrum and siteselective fluorescence spectra ofthe Eu3+: Y2SiO5 crystal were observed. More than thirty out of thetotal fifty spectral lines were observed for 5D0→7F0,1,2,3,4 transitions. The Eu3+ ions occupy twokinds of the Y3+ sites with the lowsymmetry in this crystal. The difference of the wavelengths of thetwo Eu3+ sites for 7F0→5D0 transition is about 0. 2 nm. It was foundthat the two sites were nonequivalent optical ones at room temperature. Crystal lattice constants a,b, c, and β of Eu3+: Y2SiO5 werealso measured by the X-ray diffraction method. The results show thatthe lattice constants a, b, and cof the crystal doped Eu3+ ions isvery close to those of the Y2SiO5crystal undoped Eu3+ ions.
文摘文章主要研究了Y_(2)SiO_(5):Pr^(3+)上转换纳米荧光粉对ZnO:Pr^(3+)的光催化性能的影响,通过XRD、FE-SEM、FL和UV-Vis对样品的物相、形貌、发光性能和光催化行性能进行了分析表征,实验结果表明:随着Y_(2)SiO_(5):Pr^(3+)上转换纳米荧光粉的加入量增加,ZnO:Pr^(3+)光催化效率逐渐提高,当加入0.2 g Y_(2)SiO_(5):Pr^(3+)时,光催化效率最高,在光照60 min后对亚甲基蓝的降解率达到了98.11%,相比未加入Y_(2)SiO_(5):Pr^(3+)时的光催化效率有显著提升。
基金supported by the National Natural Science Foundation of China (No.52121004)the National Science Fund for Distinguished Young Scholars (No.51825403)+2 种基金the Science and Technology Innovation Program of Hunan Province,China (No.2021RC3013)National Key R&D Program of China (No.2022YFC3901602)the Major Science and Technology Project of Gansu Province,China (No.21ZD4GD033)。
文摘A method to upgrade the iron grade in copper slag was proposed using lime to decompose Al_(2)O_(3)-containing fayalite melt(AFMT).Thermodynamic calculations indicated that adjusting the CaO/AFMT ratio can yield a residual melt with a FeO concentration of 75−88 wt.%and produce Ca_(2)SiO_(4).In-situ observations suggested that the reaction was impeded in some way.Quenching experiments revealed that the initial reaction products consisted of calcium ferrite compounds and FeO−CaO melt.At the FeO−CaO melt/AFMT interface,Ca_(2)SiO_(4) particles precipitated,forming a dense Ca_(2)SiO_(4) film that significantly impeded mass transfer.Although trace amounts of Al_(2)O_(3) in AFMT temporarily enhanced mass transfer,they were insufficient to overcome this retardation effect.The decomposition reaction was far from achieving equilibrium,demonstrating a self-retardation effect.Measures must be implemented to eliminate this self-retardation effect and enhance the efficiency of reaction kinetics.
基金This research was supported financially by the National High Technology Research and Development Program of China(863 Program)(Grant Nos.2006AA06Z371 and 2008AA06Z324)the Innovation Project of Institute of Process Engineering,Chinese Academy of Sciences(No.082702).
文摘A series of SAPO-34 molecular sieves with different SiO_(2)/Al_(2)O_(3)ratios have been synthesized for the methanol-to-olefin(MTO)reaction.Their physico-chemical properties are characterized by various techniques such as X-ray diffraction(XRD),scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),Fourier transform infrared spectroscopy(FT-IR)and N2 adsorption-desorption.The results are compared with those of the commercial HZSM-5,which show that the crystallinity and particle diameter of SAPO-34 as well as HZSM-5 increase with SiO_(2)/Al_(2)O_(3)ratio.The variation of BET surface area of SAPO-34 is different from that of HZSM-5 and the sample with SiO_(2)/Al_(2)O_(3)ratio of 0.4 exhibits the highest BET surface area.FT-IR spectra indicate that HZSM-5 has both Brǿnsted and Lewis acid sites and Brǿnsted acid sites are stronger,whereas SAPO-34 samples are dominated only by Lewis acid sites.When the SiO_(2)/Al_(2)O_(3)ratio increases,propylene and butylenes become the predominant product of the MTO reaction over HZSM-5.In contrast,the main products of this reaction catalyzed by SAPO-34 are ethylene and propylene.According to the product distribution,the reaction mechanism over HZSM-5 catalysts is proposed.
