Due to its low cost and natural abundance of sodium,Na-ion batteries(NIBs)are promising candidates for large-scale energy storage systems.The development of ultralow voltage anode materials is of great significance in...Due to its low cost and natural abundance of sodium,Na-ion batteries(NIBs)are promising candidates for large-scale energy storage systems.The development of ultralow voltage anode materials is of great significance in improving the energy density of NIBs.Low-voltage anode materials,however,are severely lacking in NIBs.Of all the reported insertion oxides anodes,the Na_(2)Ti_(3)O_(7) has the lowest operating voltage(an average potential of 0.3 V vs.Na^(+)/Na)and is less likely to deposit sodium,which has excellent potential for achieving NIBs with high energy densities and high safety.Although significant progress has been made,achieving Na_(2)Ti_(3)O_(7) electrodes with excellent performance remains a severe challenge.This paper systematically summarizes and discusses the physicochemical properties and synthesis methods of Na_(2)Ti_(3)O_(7).Then,the sodium storage mechanisms,key issues and challenges,and the optimization strategies for the electrochemical performance of Na_(2)Ti_(3)O_(7) are classified and further elaborated.Finally,remaining challenges and future research directions on the Na_(2)Ti_(3)O_(7) anode are highlighted.This review offers insights into the design of high-energy and high-safety NIBs.展开更多
The low O^(2-)diffusion rate in the electro-deoxidation of titanium containing compounds by either the OS process or the FFC process leads to a low reaction speed and a low current efficiency.In this study,Ca_(3)Ti_(2...The low O^(2-)diffusion rate in the electro-deoxidation of titanium containing compounds by either the OS process or the FFC process leads to a low reaction speed and a low current efficiency.In this study,Ca_(3)Ti_(2)O_(7) was used as a precursor to improve the reduction speed of titanium.Because of the greater number of"diffusion channels"created in cathode as Ca^(2+) liberates from Ca_(3)Ti_(2)O_(7) precursor in the electrodeoxidation process,the O^(2-)diffusion rate was improved significantly by using Ca_(3)Ti_(2)O_(7) instead of CaTiO3 as precursor.Parallel constant voltage electrolysis(3.2 V)confirms that Ca_(3)Ti_(2)O_(7) and CaTiO3 are reduced simultaneously because of their similar crystal structures.However,the reduction area of Ca_(3)Ti_(2)O_(7) spreads much faster than that of CaTiO3,indicating a difference in the O^(2-) diffusion rate.Constant voltage cyclic voltammetry(CV)and theoretical analysis of the crystal structure were also conducted to compare the differences between Ca_(3)Ti_(2)O_(7) and CaTiO3.The results indicate that using a precursor with a greater number of soluble cations,titanium reduction speed can be greatly improved in the electro-deoxidation process.Finally,a new electrolysis method for converting and recycling excess CaO from the Ca_(3)Ti_(2)O_(7) precursor was proposed.展开更多
Na2Ti3O7 has attracted much attention in the field of anode materials for Na-ion batteries thanks to its non-toxicity and very low working potential of 0.3 V vs Na0/Na+.Building a clearer picture of its formation from...Na2Ti3O7 has attracted much attention in the field of anode materials for Na-ion batteries thanks to its non-toxicity and very low working potential of 0.3 V vs Na0/Na+.Building a clearer picture of its formation from cheap Na_(2)CO_(3) and TiO_(2) starting materials is therefore of obvious interest.Here,we report new insights from an in-situ high temperature X-ray diffraction study conducted from room temperature to 800°C,complemented by ex-situ characterizations.We were thereby able to position the previously reported Na_(4)Ti_(5)O_(12) and Na_(2)Ti_(6)O_(13) intermediate phases in a reaction scheme involving three successive steps and temperature ranges.Shifts and/or broadening of a subset of the Na_(2)Ti_(6)O_(13) reflections suggested a combination of intra-layer disorder with the well-established ordering of successive layers.This in-situ study was carried out on reproducible mixtures of Na_(2)CO_(3) and TiO_(2) in 1:3 molar ratio prepared by spraydrying of mixed aqueous suspensions.Single-phase Na_(2)Ti_(3)O_(7) was obtained after only 8 h at 800°C in air,instead of a minimum of 20 h for a conventional solid-state route using the same precursors.Microstructure analysis revealed~15 mm diameter granules made up from rectangular rods of a fewmm length presenting electrochemical properties in line with expectations.In the absence of grinding or formation of intimate composites with conductive carbon,the specific capacity of 137 m Ah/g at C/5 decreased at higher rates.展开更多
A red-emitting phosphor Ca_(2.91)Si_(2)O_(7):0.09Eu^(3+) with partial Al^(3+)/P^(5+) substitution on Si^(4+) was synthesized via a simple solid-state method,and the effects of the introduction of the M^(3+/5+)(M=Al,P)...A red-emitting phosphor Ca_(2.91)Si_(2)O_(7):0.09Eu^(3+) with partial Al^(3+)/P^(5+) substitution on Si^(4+) was synthesized via a simple solid-state method,and the effects of the introduction of the M^(3+/5+)(M=Al,P)ions on the crystal structure and photoluminescence performance of Ca_(2.91)Si_(2−x)M_(x)O_(7):0.09Eu^(3+) phosphors were investigated.The X-ray diffraction(XRD),energy-dispersive X-ray spectroscopy(EDS),and X-ray photoelectron spectroscopy(XPS)results revealed that the structure of Ca_(3)Si_(2)O_(7) remained the same after the introduction of Al^(3+) and P^(5+) ions.The characteristic emission of Eu^(3+)-doped Ca_(3)Si_(2−x)M_(x)O_(7) phosphors exhibited two main peaks at 617 nm(red)and 593 nm(orange)under excitation at 394 nm,which originated from the^(5)D_(0)→^(7)F_(2)and^(5)D_(0)→^(7)F_(1) electron transitions of Eu^(3+) ions.After the partial substitution of Al^(3+) and P^(5+),the red emission intensities of the Ca_(2.91)Si_(2)O_(7):0.09Eu^(3+) phosphors were significantly enhanced by 1.88-and 1.42-fold,respectively,which is attributed to the crystal-field effect around Eu^(3+).Meanwhile,the luminescence intensities of the Ca_(2.91)Si_(1.96)Al_(0.04)O_(7):0.09Eu^(3+) and Ca_(2.91)Si_(1.94)P_(0.06)O_(7):0.09Eu^(3+) phosphors at 210℃ were 79.36%and 77.53%of those at 30°C,respectively,indicating their excellent thermal stability.Moreover,the as-prepared Ca_(2.91)Si_(1.96)Al_(0.04)O_(7):0.09Eu^(3+)and Ca_(2.91)Si_(1.94)P_(0.06)O_(7):0.09Eu^(3+) red-emitting phosphors were combined with a near-ultraviolet chip of 395 nm to fabricate red-light-emitting diode(LED)and white(w)-LED devices with excellent chromaticity features.In summary,Al^(3+)/P^(5+)-substituted Ca_(2.91)Si_(2)O_(7):0.09Eu^(3+) can serve as red-emitting phosphors for applications in w-LEDs.展开更多
基金supported by the National Natural Science Foundation of China (52307239,52102300,52207234)the Natural Science Foundation of Hubei Province (2022CFB1003,2021CFA025)。
文摘Due to its low cost and natural abundance of sodium,Na-ion batteries(NIBs)are promising candidates for large-scale energy storage systems.The development of ultralow voltage anode materials is of great significance in improving the energy density of NIBs.Low-voltage anode materials,however,are severely lacking in NIBs.Of all the reported insertion oxides anodes,the Na_(2)Ti_(3)O_(7) has the lowest operating voltage(an average potential of 0.3 V vs.Na^(+)/Na)and is less likely to deposit sodium,which has excellent potential for achieving NIBs with high energy densities and high safety.Although significant progress has been made,achieving Na_(2)Ti_(3)O_(7) electrodes with excellent performance remains a severe challenge.This paper systematically summarizes and discusses the physicochemical properties and synthesis methods of Na_(2)Ti_(3)O_(7).Then,the sodium storage mechanisms,key issues and challenges,and the optimization strategies for the electrochemical performance of Na_(2)Ti_(3)O_(7) are classified and further elaborated.Finally,remaining challenges and future research directions on the Na_(2)Ti_(3)O_(7) anode are highlighted.This review offers insights into the design of high-energy and high-safety NIBs.
基金the National Natural Science Foundation of China(Nos.51604255 and U1702251)。
文摘The low O^(2-)diffusion rate in the electro-deoxidation of titanium containing compounds by either the OS process or the FFC process leads to a low reaction speed and a low current efficiency.In this study,Ca_(3)Ti_(2)O_(7) was used as a precursor to improve the reduction speed of titanium.Because of the greater number of"diffusion channels"created in cathode as Ca^(2+) liberates from Ca_(3)Ti_(2)O_(7) precursor in the electrodeoxidation process,the O^(2-)diffusion rate was improved significantly by using Ca_(3)Ti_(2)O_(7) instead of CaTiO3 as precursor.Parallel constant voltage electrolysis(3.2 V)confirms that Ca_(3)Ti_(2)O_(7) and CaTiO3 are reduced simultaneously because of their similar crystal structures.However,the reduction area of Ca_(3)Ti_(2)O_(7) spreads much faster than that of CaTiO3,indicating a difference in the O^(2-) diffusion rate.Constant voltage cyclic voltammetry(CV)and theoretical analysis of the crystal structure were also conducted to compare the differences between Ca_(3)Ti_(2)O_(7) and CaTiO3.The results indicate that using a precursor with a greater number of soluble cations,titanium reduction speed can be greatly improved in the electro-deoxidation process.Finally,a new electrolysis method for converting and recycling excess CaO from the Ca_(3)Ti_(2)O_(7) precursor was proposed.
基金supported by the Walloon Region under the “PE PlanMarshall2.vert”program(BATWAL–1318146)。
文摘Na2Ti3O7 has attracted much attention in the field of anode materials for Na-ion batteries thanks to its non-toxicity and very low working potential of 0.3 V vs Na0/Na+.Building a clearer picture of its formation from cheap Na_(2)CO_(3) and TiO_(2) starting materials is therefore of obvious interest.Here,we report new insights from an in-situ high temperature X-ray diffraction study conducted from room temperature to 800°C,complemented by ex-situ characterizations.We were thereby able to position the previously reported Na_(4)Ti_(5)O_(12) and Na_(2)Ti_(6)O_(13) intermediate phases in a reaction scheme involving three successive steps and temperature ranges.Shifts and/or broadening of a subset of the Na_(2)Ti_(6)O_(13) reflections suggested a combination of intra-layer disorder with the well-established ordering of successive layers.This in-situ study was carried out on reproducible mixtures of Na_(2)CO_(3) and TiO_(2) in 1:3 molar ratio prepared by spraydrying of mixed aqueous suspensions.Single-phase Na_(2)Ti_(3)O_(7) was obtained after only 8 h at 800°C in air,instead of a minimum of 20 h for a conventional solid-state route using the same precursors.Microstructure analysis revealed~15 mm diameter granules made up from rectangular rods of a fewmm length presenting electrochemical properties in line with expectations.In the absence of grinding or formation of intimate composites with conductive carbon,the specific capacity of 137 m Ah/g at C/5 decreased at higher rates.
基金This work was financially supported by the Department of Science and Technology of Sichuan Province(No.2020YJ0157).
文摘A red-emitting phosphor Ca_(2.91)Si_(2)O_(7):0.09Eu^(3+) with partial Al^(3+)/P^(5+) substitution on Si^(4+) was synthesized via a simple solid-state method,and the effects of the introduction of the M^(3+/5+)(M=Al,P)ions on the crystal structure and photoluminescence performance of Ca_(2.91)Si_(2−x)M_(x)O_(7):0.09Eu^(3+) phosphors were investigated.The X-ray diffraction(XRD),energy-dispersive X-ray spectroscopy(EDS),and X-ray photoelectron spectroscopy(XPS)results revealed that the structure of Ca_(3)Si_(2)O_(7) remained the same after the introduction of Al^(3+) and P^(5+) ions.The characteristic emission of Eu^(3+)-doped Ca_(3)Si_(2−x)M_(x)O_(7) phosphors exhibited two main peaks at 617 nm(red)and 593 nm(orange)under excitation at 394 nm,which originated from the^(5)D_(0)→^(7)F_(2)and^(5)D_(0)→^(7)F_(1) electron transitions of Eu^(3+) ions.After the partial substitution of Al^(3+) and P^(5+),the red emission intensities of the Ca_(2.91)Si_(2)O_(7):0.09Eu^(3+) phosphors were significantly enhanced by 1.88-and 1.42-fold,respectively,which is attributed to the crystal-field effect around Eu^(3+).Meanwhile,the luminescence intensities of the Ca_(2.91)Si_(1.96)Al_(0.04)O_(7):0.09Eu^(3+) and Ca_(2.91)Si_(1.94)P_(0.06)O_(7):0.09Eu^(3+) phosphors at 210℃ were 79.36%and 77.53%of those at 30°C,respectively,indicating their excellent thermal stability.Moreover,the as-prepared Ca_(2.91)Si_(1.96)Al_(0.04)O_(7):0.09Eu^(3+)and Ca_(2.91)Si_(1.94)P_(0.06)O_(7):0.09Eu^(3+) red-emitting phosphors were combined with a near-ultraviolet chip of 395 nm to fabricate red-light-emitting diode(LED)and white(w)-LED devices with excellent chromaticity features.In summary,Al^(3+)/P^(5+)-substituted Ca_(2.91)Si_(2)O_(7):0.09Eu^(3+) can serve as red-emitting phosphors for applications in w-LEDs.
