Synthesis of phosphate-embedded calcium alginate beads for Pb(Ⅱ) and Cd(Ⅱ) sorption and immobilization in aqueous solutions

The phosphate-embedded calcium alginate beads were successfully synthesized based on sodium alginate, calcium dihydrogen phosphate and sodium hydrogen carbonate. Scanning electron microscopy, Fourier transformed infrared (FTIR) spectroscopy and X-ray diffraction (XRD) were conducted to characterize the morphology and structure of the phosphate-embedded calcium alginate beads. The effects of pH and the initial concentration of the metal ions on Pb(II) and Cd(II) sorption by the beads were investigated. The optimal pH values for Pb(II) and Cd(II) sorption are 4.0 and 5.5, respectively. The optimal initial concentrations of Pb(II) and Cd(II) are 200 mg/L and 25 mg/L, correspondingly, and the removal efficiencies are 94.2% and 80%,respectively. The sorption mechanism is that the heavy metal ions accessed the beads firstly due to the large surface area, combinedwith OH?, and then precipitated with phosphate radical, which was proven by FTIR and XRD. The sorption of Pb(II) and Cd(II) isfitted to Langmuir isotherm model with R2 values of 0.9957 and 0.988, respectively. The sorption capacities of Pb(II) and Cd(II) are263.16 mg/g and 82.64 mg/g, respectively. The results indicate that the phosphate-embedded calcium alginate beads could be appliedto treating Pb(II)/Cd(II)-containing wastewater and it could be implied that the synthesized beads also could be used as a kind of soil ameliorant for remediation of the heavy metal contaminated paddy soil.

CHEMICAL MODIFICATION OF THE SURFACE OF CALCIUM ALGINATE GEL BEADS

The chemical modification of the surface of calcium alginate gel beads (CAGB) via grafting copolymerization with vinyl acetate (VAc) was studied. The optimum reaction conditions with activation and graft copolymerization two steps were explored. First, 5 grams CAGB with 2.5 mm initial diameter was initiated with 0.0493 mol/L K2S2O8 at 51 °C for 30 min in 15 mL 1 % PVA/H2O. Then 4.34 moi/L VAc was added dropwise and the reaction was allowed to proce at 48 °C for 3 h. The grafting efficiency could come up to 30%. It was found the stability of modified CAGB in the air and in electrolyte solutions was greatly improved.

Co-Free High-Entropy Alloys Powders Immobilized by Electrospray and Microf luidics for Decolorization of Azo Dye

In recent years,high-entropy alloys(HEAs)have received more and more attention due to their unique microstructure and properties.Several researchers have reported that some ball-milled(BM)HEAs powders possess prominent decolorization performance for azo dyes.Three kinds of Co-free HEA powders(AlCrFeMn,AlCrFeNi and FeCrNiMn)have been synthesized by ball milling in this work,of which AlCrFeMn shows the best decolorization efficiency for DB6 aqueous solution.However,at this time,the BM HEAs are in powder state and not easy to be reused,so the loss rate of the powders is high during the reaction.Sometimes,the reaction between reacted the powders and the dye solution is too fast to control.While,in order to solve these problems,this work proposes to immobilize bare BM AlCrFeMn HEA powders in calcium alginate beads(CAB s)by electrospray and microfluidics.Through four cycles of reaction,the loss rate of the AlCrFeMn powders can be reduced from 40 to 5 wt%if the powders are immobilized by CABs with an average diameter of 0.55 mm obtained at the DC voltage of 30 kV.In addition,in the four cycles of experiment,the AlCrFeMn HEA-CABs with an average diameter of0.55 mm shows better stability and easier separation than that of the bare AlCrFeMn powders.These findings provide new ideas for HEAs to decolorize azo dyes and are of great significance for protecting freshwater resources.