Fibronectin （FN） imprinted polypropylene （PP） non-woven supported calcium alginate/polyacrylamide hydrogel film （PP-s-CA/PAM MIP） was prepared using non-woven PP fiber as matrix, FN as template molecule, sodium ...Fibronectin （FN） imprinted polypropylene （PP） non-woven supported calcium alginate/polyacrylamide hydrogel film （PP-s-CA/PAM MIP） was prepared using non-woven PP fiber as matrix, FN as template molecule, sodium alginate （SA） and acrylamide （AM） as functional monomers, via UV radiation-reduced polymerization. The PP-s-CA[PAM MIP exhibited an obvious improvement in terms of adsorption capacity for FN compared with non-imprinted polymer （NIP）. The PP-s-CA/PAM MIP was successfully used for the culture of mouse fibroblast cells （L929） and the results showed that PP-s-CA]PAM MIP exhibited better cell adherence performance than the NIP did.展开更多
Biodegradable chitosan(CS)films can meet the demand for sustainable development.However,the performance of pure CS membrane still exists a particular gap compared with the traditional film.Inorganic nanomaterials with...Biodegradable chitosan(CS)films can meet the demand for sustainable development.However,the performance of pure CS membrane still exists a particular gap compared with the traditional film.Inorganic nanomaterials with the controllable release are added to improve its physical and chemical properties.Herein,a series of CS/phosphate-stabilized amorphous calcium carbonate(CS/ACCP)and CS/sodium alginate/ACCP(CS/Alginate/ACCP)composite films were prepared by the flow method.The effects of ACCP and Alginate/ACCP nanoparticles on the physical and chemical properties of the composite membrane were investigated.The results showed that the composite nanoparticles could significantly improve CS film’s compactness,hydrophobicity,and mechanical properties and enhance its ultraviolet(UV)blocking ability,water resistance,and water vapor blocking ability.When the number of nanoparticles was 8%,the mechanical properties of the CS composite membrane reached optimum value,and the comprehensive performance was better.In addition,the controlled-release properties of CS composite membranes were also studied,and the antioxidant,antibacterial,biocompatibility,and fresh-keeping effects of the composite membranes were explored.The results indicated that the CS composite membranes had not only excellent bacteriostatic(72%)properties(Escherichia coli)but also presented well fruit preservation(15 days)properties(sugar orange).In particular,the controlled release range of CS composite membrane at 12 h was between 30%and 90%,which provided a theoretical basis for its use as an edible membrane.Therefore,based on ACCP and Alginate/ACCP nanoparticles,CS composite membranes with more excellent application value in the biological field were prepared through further optimization design.展开更多
In this study, a simple and effective technique for establishing an external mass transfer model in a recirculated packed-bed batch reactor (RPBBR) with an immobilized lipase enzyme and Jatropha oil system is presente...In this study, a simple and effective technique for establishing an external mass transfer model in a recirculated packed-bed batch reactor (RPBBR) with an immobilized lipase enzyme and Jatropha oil system is presented. The external mass transfer effect can be represented with a model in the form of Colburn factor JD = K Re-(1–n). The value of K and n were derived from experimental data at different mass flow rates.The experiment shows an average increment of 1.51% FFA for calcium alginate and 1.62% FFA for carrageenan after the hydrolysis took place. Based on different biopolymer material used in immobilized beads, JD = 1.674 Re-0.4 for calcium alginate and JD = 1.881 Re-0.3 for k-carrageenan were found to be adequate to predict the experimental data for external mass transfer in the reactor in the Reynolds number range of 0.2 to 1.2. The purposed model can be used for the design of industrial bioreactor and scale up. Besides, the external mass transfer coefficients for the hydrolysis of Jatropha oil reaction and the entrapment efficiency for the two biopolymer materials used were also investigated.展开更多
基金supported by the National Natural Science Foundation of China (Nos.51103102,51103180,81100100,31200674)Tianjin Municipal Natural Science Foundation (No.15JCZDJC38300)
文摘Fibronectin （FN） imprinted polypropylene （PP） non-woven supported calcium alginate/polyacrylamide hydrogel film （PP-s-CA/PAM MIP） was prepared using non-woven PP fiber as matrix, FN as template molecule, sodium alginate （SA） and acrylamide （AM） as functional monomers, via UV radiation-reduced polymerization. The PP-s-CA[PAM MIP exhibited an obvious improvement in terms of adsorption capacity for FN compared with non-imprinted polymer （NIP）. The PP-s-CA/PAM MIP was successfully used for the culture of mouse fibroblast cells （L929） and the results showed that PP-s-CA]PAM MIP exhibited better cell adherence performance than the NIP did.
基金The work was financially supported by the National Natural Science Foundation of China(31700689)Natural Science Foundation of Shanxi Province(201901D111115)+2 种基金Supported by Transformation of Scientific and Technological Achievements Programs of Higher Education Institutions in Shanxi(2020CG015)Key Technology Research and Development Plan of Jinzhong City in Shanxi(Y201022)Liuwei Zhai Food Research Institute,Taiyuan University of Technology(213020310-J).
文摘Biodegradable chitosan(CS)films can meet the demand for sustainable development.However,the performance of pure CS membrane still exists a particular gap compared with the traditional film.Inorganic nanomaterials with the controllable release are added to improve its physical and chemical properties.Herein,a series of CS/phosphate-stabilized amorphous calcium carbonate(CS/ACCP)and CS/sodium alginate/ACCP(CS/Alginate/ACCP)composite films were prepared by the flow method.The effects of ACCP and Alginate/ACCP nanoparticles on the physical and chemical properties of the composite membrane were investigated.The results showed that the composite nanoparticles could significantly improve CS film’s compactness,hydrophobicity,and mechanical properties and enhance its ultraviolet(UV)blocking ability,water resistance,and water vapor blocking ability.When the number of nanoparticles was 8%,the mechanical properties of the CS composite membrane reached optimum value,and the comprehensive performance was better.In addition,the controlled-release properties of CS composite membranes were also studied,and the antioxidant,antibacterial,biocompatibility,and fresh-keeping effects of the composite membranes were explored.The results indicated that the CS composite membranes had not only excellent bacteriostatic(72%)properties(Escherichia coli)but also presented well fruit preservation(15 days)properties(sugar orange).In particular,the controlled release range of CS composite membrane at 12 h was between 30%and 90%,which provided a theoretical basis for its use as an edible membrane.Therefore,based on ACCP and Alginate/ACCP nanoparticles,CS composite membranes with more excellent application value in the biological field were prepared through further optimization design.
文摘In this study, a simple and effective technique for establishing an external mass transfer model in a recirculated packed-bed batch reactor (RPBBR) with an immobilized lipase enzyme and Jatropha oil system is presented. The external mass transfer effect can be represented with a model in the form of Colburn factor JD = K Re-(1–n). The value of K and n were derived from experimental data at different mass flow rates.The experiment shows an average increment of 1.51% FFA for calcium alginate and 1.62% FFA for carrageenan after the hydrolysis took place. Based on different biopolymer material used in immobilized beads, JD = 1.674 Re-0.4 for calcium alginate and JD = 1.881 Re-0.3 for k-carrageenan were found to be adequate to predict the experimental data for external mass transfer in the reactor in the Reynolds number range of 0.2 to 1.2. The purposed model can be used for the design of industrial bioreactor and scale up. Besides, the external mass transfer coefficients for the hydrolysis of Jatropha oil reaction and the entrapment efficiency for the two biopolymer materials used were also investigated.
