In congested urban roads, cars must stop at intersections because of city traffic lights. As a result, pedestri- ans and traffic police personnel are exposed to pollutants emanating from the tailpipe of various vehicl...In congested urban roads, cars must stop at intersections because of city traffic lights. As a result, pedestri- ans and traffic police personnel are exposed to pollutants emanating from the tailpipe of various vehicles at such city trafficjunctions. In this study, various gasoline- and diesel-fueled cars complying with differ- ent emission standards were tested for their emissions in simulated city traffic junction conditions. The engine exhaust from these cars was subjected to physicochemical characterization at different engine speeds under no-load conditions. These engine conditions were chosen because the cars idle at differ- ent engine speeds at a city traffic junction. Gravimetric and real-time measurements were performed for the tailpipe exhaust sampled from these vehicles. Exhaust particles were collected on 47 mm diameter quartz filter papers and subjected to gravimetric analysis for determining the total particulate mass （TPM） and trace metals while the engines were operated at two different engine idling speeds, 1500 rpm （representing low idling） and 2500 rpm （representing high idling）. At similar engine operating condi- tions, TPM and trace metals were lower for the exhaust from gasoline engines compared to the exhaust from diesel engines. Real-time measurements were performed for particle-bound poly-aromatic hydro- carbons （PAHs）, particle number and size distribution, regulated gaseous emissions and smoke opacity of the exhaust at four different engine speeds, 1500, 2000, 2500, and 3000 rpm. Particle-bound PAHs showed a decreasing trend for the vehicles that complied with stricter vehicular emission standards. Higher particle peak number concentrations were observed for diesel exhausts compared to the results for gasoline exhaust. Regulated gaseous emissions were also comoared.展开更多
Biodiesel has generated increased interest recently as an alternative to petroleum-derived diesel. Due to its high oxygen content, biodiesel typically burns more completely than petroleum diesel, and thus has lower em...Biodiesel has generated increased interest recently as an alternative to petroleum-derived diesel. Due to its high oxygen content, biodiesel typically burns more completely than petroleum diesel, and thus has lower emissions of hydrocarbons (HC), carbon monoxide (CO), and particulate matter (PM). However, biodiesel may increase or decrease nitrogen oxide (NOx) and carbon dioxide (CO2) emissions, depending on biodiesel feedstock, engine type, and test cycle. The purpose of this study was to compare emissions from 20% blends of biodiesel made from 4 feedstocks (soybean oil, canola oil, waste cooking oil, and animal fat) with emissions from ultra low sulfur diesel (ULSD). Emissions of NOx and CO2 were made under real-world driving conditions using a Horiba On-Board Measurement System OBS-1300 on a highway route and arterial route;emissions of NOx, CO2, HC, CO, and PM were measured in a controlled setting using a chassis dynamometer with Urban Dynamometer Drive Schedule. Dynamometer test results showed statistically significant lower emissions of HC, CO, and PM from all B20 blends compared to ULSD. For CO2, both on-road testing (arterial, highway, and idling) and dynamometer testing showed no statistically significant difference in emissions among the B20 blends and ULSD. For NOx, dynamometer testing showed only B20 from soybean oil to have statistically significant higher emissions. This is generally consistent with the on-road testing, which showed no statistically significant difference in NOx emissions between ULSD and the B20 blends.展开更多
文摘In congested urban roads, cars must stop at intersections because of city traffic lights. As a result, pedestri- ans and traffic police personnel are exposed to pollutants emanating from the tailpipe of various vehicles at such city trafficjunctions. In this study, various gasoline- and diesel-fueled cars complying with differ- ent emission standards were tested for their emissions in simulated city traffic junction conditions. The engine exhaust from these cars was subjected to physicochemical characterization at different engine speeds under no-load conditions. These engine conditions were chosen because the cars idle at differ- ent engine speeds at a city traffic junction. Gravimetric and real-time measurements were performed for the tailpipe exhaust sampled from these vehicles. Exhaust particles were collected on 47 mm diameter quartz filter papers and subjected to gravimetric analysis for determining the total particulate mass （TPM） and trace metals while the engines were operated at two different engine idling speeds, 1500 rpm （representing low idling） and 2500 rpm （representing high idling）. At similar engine operating condi- tions, TPM and trace metals were lower for the exhaust from gasoline engines compared to the exhaust from diesel engines. Real-time measurements were performed for particle-bound poly-aromatic hydro- carbons （PAHs）, particle number and size distribution, regulated gaseous emissions and smoke opacity of the exhaust at four different engine speeds, 1500, 2000, 2500, and 3000 rpm. Particle-bound PAHs showed a decreasing trend for the vehicles that complied with stricter vehicular emission standards. Higher particle peak number concentrations were observed for diesel exhausts compared to the results for gasoline exhaust. Regulated gaseous emissions were also comoared.
文摘Biodiesel has generated increased interest recently as an alternative to petroleum-derived diesel. Due to its high oxygen content, biodiesel typically burns more completely than petroleum diesel, and thus has lower emissions of hydrocarbons (HC), carbon monoxide (CO), and particulate matter (PM). However, biodiesel may increase or decrease nitrogen oxide (NOx) and carbon dioxide (CO2) emissions, depending on biodiesel feedstock, engine type, and test cycle. The purpose of this study was to compare emissions from 20% blends of biodiesel made from 4 feedstocks (soybean oil, canola oil, waste cooking oil, and animal fat) with emissions from ultra low sulfur diesel (ULSD). Emissions of NOx and CO2 were made under real-world driving conditions using a Horiba On-Board Measurement System OBS-1300 on a highway route and arterial route;emissions of NOx, CO2, HC, CO, and PM were measured in a controlled setting using a chassis dynamometer with Urban Dynamometer Drive Schedule. Dynamometer test results showed statistically significant lower emissions of HC, CO, and PM from all B20 blends compared to ULSD. For CO2, both on-road testing (arterial, highway, and idling) and dynamometer testing showed no statistically significant difference in emissions among the B20 blends and ULSD. For NOx, dynamometer testing showed only B20 from soybean oil to have statistically significant higher emissions. This is generally consistent with the on-road testing, which showed no statistically significant difference in NOx emissions between ULSD and the B20 blends.
