Determination of Water Diffusion Coefficients and Dynamics in Adhesive/Carbon Fiber Reinforced Epoxy Resin Composite Joints

To determinate the water diffusion coefficients and dynamics in adhesive/carben fiber reinforced epoxy resin composite joints, energy dispersive X-ray spectroscopy analysis（EDX） is used to establish the content change of oxy- gen in the adhesive in adhesive/carbon fther reinforced epoxy resin composite joints. As water is made up of oxygen and hydrogen, the water diffusion coefficients and dynamics in adhesive/carben fiber reinforced epoxy resin composite joints can be obtained from the change in the content of oxygen in the adhesive during humidity aging, via EDX analy-sis. The authors have calculated the water diffusion coefficients and dynamics in the adhesive/carbon fiber reinforced epoxy resin composite joints with the aid of beth energy dispersive X-ray spectroscopy and elemental analysis. The de- termined results with EDX analysis are almost the same as those determined with elemental analysis and the results al- so show that the durability of the adhesive/carbon fther reinforced epoxy resin composite joints subjected to silane cou- pling agent treatment is better than those subjected to sand paper burnishing treatment and chemical oxidation treat- ment.

Smart Behavior of Carbon Fiber Reinforced Cement-based Composite

The electrical characteristics of cement-based material can be remarkably improved by the addition of short carbon fibers. Carbon fiber reinforced cement composite (CFRC) is an intrinsically smart material that can sense not only the stress and strain, but also the temperature. In this paper, variations of electrical resistivity with external applied load, and relation of thermoelectric force and temperature were investigated. Test results indicated that the electrical signal is related to the increase in the material volume resistivity during crack generation or propagation and the decrease in the resistivity during crack closure. Moreover, it was found that the fiber addition increased the linearity and reversibility of the Seebeck effect in the cement-based materials. The change of electrical characteristics reflects large amount of information of inner damage and temperature differential of composite, which can be used for stress-strain or thermal self-monitoring by embedding it in the concrete structures.

Piezoresistivity in Carbon Fiber Reinforced Cement Based Composites

The results of some interesting investigation on the piezoresistivity of carbon fiber reinforced cement based composites (CFRC) are presented with the prospect of developing a new nondestructive testing method to assess the integrity of the composite. The addition of short carbon fibers to cement-based mortar or concrete improves the structural performance and at the same time significantly decreases the bulk electrical resistivity. This makes CFRC responsive to the smart behavior by measuring the resistance change with uniaxial pressure. The piezoresistivity of CFRC under different stress was studied, at the same time the damage occurring inner specimens was detected by acoustic emission as well. Test results show that there exists a marking pressure dependence of the conductivity in CFRC, in which the so-called negative pressure coefficient of resistive (NPCR) and positive pressure coefficient of resistive (PPCR) are observed under low and high pressure. Under constant pressures, time-dependent resistivity is an outstanding characteristic for the composites, which is defined as resistance creep. The breakdown and rebuild-up process of conductive network under pressure may be responsible for the pressure dependence of resistivity.

High-Performance Recyclable Furan-based Epoxy Resin and Its Carbon Fiber Composites with Dense Hydrogen Bonding

The emerging biomass-based epoxy vitrimers hold great potential to fulfill the requirements for sustainable development of society.Since the existence of dynamic chemical bonds in vitrimers often reduces both the thermal and mechanical properties of epoxy resins, it is challenging to produce recyclable epoxy vitrimers with both excellent mechanical properties and good thermal stability. Herein, a monomer 4-(((5-(hydroxymethyl)furan-2-yl)methylene)amino)phenol(FCN) containing furan ring with potential to form high density of hydrogen bonding among repeating units is designed and copolymerized with glycerol triglycidyl ether to yield epoxy resin(FCN-GTE), which intrinsically has dual hydrogen bond networks, dynamic imine structure and resultant high performance. Importantly, as compared to the BPA-GTE, the FCN-GTE exhibits significantly improved mechanical properties owing to the increased density of hydrogen bond network and physical crosslinking interaction. Furthermore, density functional theory(DFT) calculation and in situ FTIR analysis is conducted to decipher the formation mechanism of hydrogen bond network. In addition, the FCN-GTE possesses superior UV shielding, chemical degradation, and recyclability because of the existence of abundant imine bonds. Notably, the FCN-GTE-based carbon fiber composites could be completely recycled in an amine solution.This study provides a facile strategy for synthesizing recyclable biomass-based high-performance epoxy vitrimers and carbon fiber composites.

Piezoresistivity of Carbon Fiber Graphite Cement-based Composites with CCCW

The electrical conductivity and piezoresistivity of carbon fiber graphite cement-matrix composites（CFGCC） with carbon fiber content（1% by the weight of cement）,graphite powder contents （0%-50% by the weight of cement） and CCCW（cementitious capillary crystalline waterproofing materials,4% by the weight of cement） were studied.The experimental results showed that the relationship between the resistivity of CFGCC and the concentration of graphite powders had typical features of percolation phenomena.The percolation threshold was about 20%.A clear piezoresistive effect was observed in CFGCC with 1wt% of carbon fibers,20wt% or 30wt% of graphite powders under uniaxial compressive tests,indicating that this type of smart composites was a promising candidate for strain sensing.The measured gage factor （defined as the fractional change in resistance per unit strain） of CFGCC with graphite content of 20wt% and 30wt% were 37 and 22,respectively.With the addition of CCCW,the mechanical properties of CFGCC were improved,which benefited CFGCC piezoresistivity of stability.

Ablation Property of Ceramics/Carbon Fibers/Resin Novel Super-hybrid Composite

A novel super-hybrid composite (NSHC) is prepared with three-dimension reticulated SiC ceramic (3DRC), high performance carbon fibers and modified phenolic resin (BPR) in this paper. Ablation performance of super-hybrid composite is studied. The results show that the NSHC has less linear ablation rate compared with pure BPR and CF/BPR composite, for example, its linear ablation rate is 50% of CF/BPR at the same fiber content. Mass ablation rate of the NSHC is slightly lower than that of pure BPR and CF/BPR composite because of their difference in the density. Scanning electron microscopic analysis indicates that 3DRC can increase anti-erosion capacity of materials because its special reticulated structure can control the deformation of materials and strengthen the stability of integral structure.

Recyclable High-performance Carbon Fiber Reinforced Epoxy Composites Based on Dithioacetal Covalent Adaptive Network

Recycling of carbon fiber reinforced composites is important for sustainable development and the circular economy.Despite the use of dynamic chemistry,developing high-strength recyclable CFRPs remains a major challenge due to the mutual exclusivity between the dynamic and mechanical properties of materials.Here,we developed a high-strength recyclable epoxy resin(HREP)based on dynamic dithioacetal covalent adaptive network using diglycidyl ether bisphenol A(DGEBA),pentaerythritol tetra(3-mercapto-propionate)(PETMP),and vanillin epoxy resin(VEPR).At high temperatures,the exchange reaction of thermally activated dithioacetals accelerated the rearrangement of the network,giving it significant reprocessing ability.Moreover,HREP exhibited excellent solvent resistance due to the increased cross-linking density.Using this high-strength recyclable epoxy resin as the matrix and carbon fiber modified with hyperbranched ionic liquids(HBP-AMIM+PF6-)as the reinforcing agent,high performance CFRPs were successfully prepared.The tensile strength,interfacial shear strength(IFSS)and interlaminar shear strength(ILSS)of the optimized formulation(HREP20/CF-HBPPF6)were 1016.1,70.8 and 76.0 MPa,respectively.In addition,the CFRPs demonstrated excellent solvent and acid/alkali-resistance.The CFRPs could completely degrade within 24 h in DMSO at 140℃,and the recycled CF still maintained the same tensile strength and ILSS as the original after multiple degradation cycles.

提升杂环芳纶复合性能的研究进展

杂环芳纶是指主链中含有芳杂环(通常为苯并咪唑)的一类对位芳纶,其具有轻质、高强高模、高耐热、耐溶剂等优异性能。相比典型的芳纶Ⅱ纤维,杂环芳纶具有更加优异的力学性能,目前在我国的航空航天和防弹防护等领域得到了实际的应用。然而,与其他有机纤维类似,杂环芳纶由于表面惰性,其与树脂的复合性能相对较低,限制了其在先进复合材料领域的应用。本文从杂环芳纶表面改性和结构设计两方面出发,总结近年来提高杂环芳纶复合性能的设计思路、技术手段和研究成果,展望其在先进复合材料应用领域的发展趋势,为有机纤维的界面设计及改善界面粘接性提供帮助和参考。

玻璃纤维增强不饱和聚酯树脂防火隔板湿热老化特性

为了研究玻璃纤维增强不饱和聚酯树脂防火隔板湿热老化特性,结合电缆隧道内实际温湿环境和加速老化模型对防火隔板进行等效湿热老化处理。通过扫描电镜试验、热重试验、氧指数试验以及冲击强度试验检测了试样的微观形貌、热稳定性、燃烧性能和机械性能。结果表明,老化1周期后试样表面析出白色粉状物、老化3周期后断面出现明显裂痕;微观形貌图显示老化2周期后试样中的树脂从玻璃纤维上脱落,老化5周期后大量玻璃纤维裸露在外。试样质量损失率峰值最终升高45%,冲击强度最终下降41.6%,抗弯强度最终降低47.3%,吸水抗弯强度最终下降42.5%,表明湿热老化后试样热稳定性及机械性能出现明显下降。试样氧指数最终提高28.7%;烟密度等级均满足技术规范标准。上述两项检测无法作为判断湿热老化后防火隔板性能劣化的指标。

铁粉/碳纤维增强树脂复合材料的制备 及脆化损伤研究

将偶联剂改性纳米铁(Fe)粉与预处理后的碳纤维混合,浸润于环氧树脂基料中,经过搅拌混合制备纳米Fe粉/碳纤维增强树脂复合材料,研究了复合材料在高温老化、水浸老化环境下的脆化损伤行为。结果表明:树脂受到高温老化和水浸泡老化后会出现脆化损伤,碳纤维和纳米Fe粉加入会对该损伤有一定抑制;加入质量分数为4.0%的纳米Fe粉后,随着高温老化时间延长,碳纤维质量分数为3.0%的纳米Fe粉/碳纤维增强复合材料的拉伸强度、断裂韧性下降幅度较小,同时脆化损伤后树脂与纳米Fe粉、碳纤维仍结合紧密;碳纤维质量分数为3.0%、纳米Fe粉质量分数为4.0%的纳米Fe粉/碳纤维增强复合材料经水浸老化后,断裂韧性仍旧保持较高水平。

纤维增强热塑性复合材料与金属连接技术的研究进展

纤维增强热塑性复合材料(FRTP)与金属的连接技术是多材料异质结构的关键制造技术。总结了纤维增强热塑性树脂基复合材料相对于传统金属材料的性能优势,分析了FRTP与金属连接技术的重要性和必要性,系统回顾了胶接、机械连接、混合连接和焊接四大类FRTP/金属连接技术的特点和发展,最后对未来FRTP/金属异质结构连接技术的发展、接头性能的改善提出了展望。

生物基可降解环氧树脂及其可回收碳纤维复合材料的研究进展

环氧树脂是目前应用最为广泛的热固性树脂之一,其固化后会形成不溶、不熔的高度交联的三维网络结构,从而导致树脂及其碳纤维复合材料的降解困难而且难以再加工,造成了严重的资源浪费与环境污染。采用可再生生物质原料制备生物基可降解环氧树脂及其碳纤维复合材料,在缓解能源危机、减轻环境污染和实现资源再利用上具有重要意义。综述了生物基可降解环氧树脂及其可回收碳纤维复合材料的研究进展,主要包括含有热或化学不稳定键的可降解环氧树脂的合成、性能、降解机理及其碳纤维的无损回收,并总结了其优缺点。

碳纤维增强树脂基复合材料界面改性及应用进展

轻质高强的碳纤维增强树脂基复合材料(CFRP)在碳达峰和碳中和的国家战略中展现出重要的研究价值,提高复合材料界面结合强度是重点和难点问题。针对碳纤维表面浸润性差和力学性能转化率低的问题,简述了CFRP界面增强理论和碳纤维表面处理方法,重点阐述了氧化法、化学接枝和涂层法,用物理或化学手段提高复合材料力学性能。此外,从热固性树脂和热塑性树脂两种基体材料的各自性能特点分析了碳纤维与树脂基体适配性的问题,提出了不同的解决方案。最后,介绍了CFRP在航空、风电叶片和新能源汽车领域的研究进展,提出了飞机轻量化、风机大型化和电车普及背景下材料研究的发展建议,如优化针对高强或高模等具有不同表面形态碳纤维的特定表面改性技术,开发针对不同树脂的改性方法,研发不同类别及应用场景下的碳纤维上浆剂,加强复合材料界面增强理论和界面表征技术研究,制定碳纤维复合材料标准化体系。

Zr基非晶破片对碳纤维复合靶及后效铝靶的侵彻试验研究

Zr基非晶破片是一种新兴的活性高效毁伤元,其着靶速度达到一定阈值时会发生燃烧反应并破碎,从而大幅提高其后效毁伤能力。为研究Zr基非晶破片对碳纤维增强复合材料的侵彻破坏机理及后效毁伤能力,利用弹道枪加载球形破片,分别以496.4~1 085.8 m/s、571.4~1 103.9 m/s的速度范围撞击8和6 mm厚的碳纤维复合靶,并布置2 mm厚LY12铝靶板作为后效靶,以比较破片在不同工况下的后效毁伤能力。实验结果表明:碳纤维靶受活性破片冲击时,其迎弹面的破坏形式主要是压缩失效与剪切失效的耦合破坏,其背弹面的破坏形式主要是拉伸失效破坏与层间的脱粘分裂;随着破片着靶速度的提高,碳纤维靶板的压剪耦合破坏比例逐渐增加,拉伸断裂与分层现象逐渐减弱;破片对于8和6 mm厚碳纤维靶的弹道极限速度分别为351.9、264.6 m/s;相同着靶速度下,8 mm厚碳纤维靶的后效毁伤面积大于6 mm厚碳纤维靶的后效毁伤面积,两者之间的差异随着着靶速度的提高而逐渐减小;破片冲击等厚度碳纤维靶时,破片的后效毁伤能力随着靶速度的提高而增强。

不同铺层数平纹碳纤维力学特性分析

为明确面密度为200g/m^(2)的3K平纹碳纤维的力学特性,分别进行不同铺层数下碳纤维树脂基复合材料的拉伸、弯曲和冲压式剪切实验。结果表明:试样的损伤形式为断口处的分层、纤维从基体中拔出和断裂、垂直于载荷方向上的纤维束撕裂、基体之间的挤压、纤维的剪切断裂、基体的挤压变形。拉伸和弯曲试样的位移载荷曲线的起始阶段是线性的,弯曲试样的位移载荷曲线的起始阶段是非线性的。在2—12层的铺层数变化范围内,所有试样的铺层数载荷曲线呈现线性变化,试样承受弯曲载荷的能力较弱。

聚吡咯共轭结构对碳纤维增强树脂基复合材料热循环稳定性能的影响

为解决碳纤维增强树脂基复合材料(CFRPs)存在的碳纤维与基体间界面黏结性较弱和在热循环过程中因热膨胀系数不匹配而产生界面破坏的问题,通过低温聚合得到含有较多共轭结构的聚吡咯(PPy)对预处理后碳纤维(CF)进行表面改性,分别在0、30、60℃下制得碳纤维/聚吡咯复合纤维(PPy/CF),并研究了不同聚合温度下制备的CFRPs的界面结合性能、热膨胀性能和热循环稳定性能。结果表明:PPy/CF-0纤维的表面粗糙度与CF相比增加了2.09倍,这有利于树脂锚定在碳纤维表面,从而提高界面结合性能;并且PPy/CF-0纤维表面的聚吡咯层具有较完善的共轭结构,整体表现为负热膨胀系数,使得复合材料的层间剪切强度和界面剪切强度分别达到了CF的1.56倍和1.70倍;此外还使得CFRPs的热循环稳定性有了较明显的提升,经100次热循环实验后,其剪切强度仍能保持在初始数值的70%以上。

Ⅳ型储氢气瓶承载层CFRP基体优选与性能研究

以SW树脂及HY4006树脂为基体树脂,以12K T700碳纤维(HY-1、HY-2、HY-3)为纤维增强体,制备Ⅳ型储氢气瓶承载层用碳纤维增强复合材料(CFRP),从固化特性、耐热性能、流变性能和树脂浇注体的力学性能等方面筛选适合的树脂基体,通过树脂对纤维的浸润性及CFRP的力学性能、微观形貌、孔隙率等筛选出最优的CFRP体系。结果表明:SW树脂的固化温度为109~142℃,固化速率快,固化时间短,黏度增长较慢,而且其浇注体力学性能好,比HY4006树脂更适合于Ⅳ型储氢气瓶的缠绕工艺;SW树脂对HY-2碳纤维的浸润性更好,起始接触角为80.06°,浸润时间仅2.5 s;由SW树脂与HY-2碳纤维制备的CFRP拉伸强度为2650 MPa,剪切强度为64.63 MPa,密度为1.67 g/cm 3,纤维体积分数为63.61%,该CFRP界面结合好,孔隙率低,力学性能优异,是Ⅳ型储氢气瓶缠绕层的理想材料。

碳酸钙晶须混杂聚乙烯纤维增强水泥基复合材料力学性能研究

为研究碳酸钙晶须掺量对聚乙烯纤维增强水泥基复合材料(PE-ECC)力学性能及微观结构的影响,设计了4组不同碳酸钙晶须掺量的PE-ECC试件,对其进行抗压性能试验、抗拉性能试验、三点弯曲断裂性能试验,并使用XRD、SEM、NMR技术对其微观结构进行研究。结果表明,碳酸钙晶须对PE-ECC有增强增韧作用,随着碳酸钙晶须掺量增加,这种增强增韧作用呈先增大后减小的趋势,当碳酸钙晶须掺量为1%(体积分数)时,PE-ECC的抗压性能、拉伸性能、断裂性能提升最佳。适量的碳酸钙晶须能填充基体,减少少害孔及多害孔数量,改善孔隙结构。

短切碳纤维分散方式及对纤维增强石膏基复合材料力学性能的影响

采用H_(2)O_(2)和NaClO对短切碳纤维进行表面氧化处理,并采用PCE、HPMC以及超声对其进行分散处理,制备短切碳纤维增强石膏基复合材料,并对其力学性能进行研究。结果表明:经过氧化处理后,短切碳纤维表面亲水含氧官能团羟基和羰基含量增多,表面粗糙度增大;氧化处理后的短切碳纤维在PCE溶液中分散效果最好;短切碳纤维的加入有效提高石膏硬化体的抗压强度,当掺1%采用PCE分散处理的6 mm短切碳纤维时,石膏硬化体强度最高,较未掺时提高72.4%,这是由于PCE在短切碳纤维表面的吸附性和PCE与石膏颗粒反应形成的空间位阻效应双重作用提高了短切碳纤维在石膏浆体中的分散性,进而提高了短切碳纤维增强石膏基复合材料的抗压强度。

碳纤维/酚醛树脂复合材料热解特性研究

使用热重-差热同步分析仪研究了某飞机框架部位用碳纤维/酚醛树脂复合材料在不同气氛和不同升温速率条件下的热分解特性。结果表明:在空气气氛下碳纤维/酚醛树脂复合材料热解反应分为3个阶段,在氮气气氛下热解反应分为2个阶段;随着升温速率的提高,氮气气氛下复合材料热解的初始分解温度、第2阶段起始温度都随着升温速率的提高而增加,2个阶段的热解温度范围都逐渐变宽且每一阶段的温度范围都要高于前一个热解阶段,最大失重速率温度也向高温方向移动,相同温度下失重明显变大。采用Kissnger法、FWO法、Starink法对碳纤维/酚醛树脂复合材料的热解动力学进行计算,得到其表观活化能。