Regulatable Orthotropic 3D Hybrid Continuous Carbon Networks for Efficient Bi-Directional Thermal Conduction

Vertically oriented carbon structures constructed from low-dimen-sional carbon materials are ideal frameworks for high-performance thermal inter-face materials(TIMs).However,improving the interfacial heat-transfer efficiency of vertically oriented carbon structures is a challenging task.Herein,an orthotropic three-dimensional(3D)hybrid carbon network(VSCG)is fabricated by depositing vertically aligned carbon nanotubes(VACNTs)on the surface of a horizontally oriented graphene film(HOGF).The interfacial interaction between the VACNTs and HOGF is then optimized through an annealing strategy.After regulating the orientation structure of the VACNTs and filling the VSCG with polydimethylsi-loxane(PDMS),VSCG/PDMS composites with excellent 3D thermal conductive properties are obtained.The highest in-plane and through-plane thermal conduc-tivities of the composites are 113.61 and 24.37 W m^(-1)K^(-1),respectively.The high contact area of HOGF and good compressibility of VACNTs imbue the VSCG/PDMS composite with low thermal resistance.In addition,the interfacial heat-transfer efficiency of VSCG/PDMS composite in the TIM performance was improved by 71.3%compared to that of a state-of-the-art thermal pad.This new structural design can potentially realize high-performance TIMs that meet the need for high thermal conductivity and low contact thermal resistance in interfacial heat-transfer processes.

Hybrid hard carbon framework derived from polystyrene bearing distinct molecular crosslinking for enhanced sodium storage

Exploiting high-performance yet low-cost hard carbon anodes is crucial to advancing the state-of-the-art sodium-ion batteries.However,the achievement of superior initial Coulombic efficiency(ICE)and high Na-storage capacity via low-temperature carbonization remains challenging due to the presence of tremendous defects with few closed pores.Here,a facile hybrid carbon framework design is proposed from the polystyrene precursor bearing distinct molecular bridges at a low pyrolysis temperature of 800℃ via in situ fusion and embedding strategy.This is realized by integrating triazine-and carbonylcrosslinked polystyrene nanospheres during carbonization.The triazine crosslinking allows in situ fusion of spheres into layered carbon with low defects and abundant closed pores,which serves as a matrix for embedding the well-retained carbon spheres with nanopores/defects derived from carbonyl crosslinking.Therefore,the hybrid hard carbon with intimate interface showcases synergistic Na ions storage behavior,showing an ICE of 70.2%,a high capacity of 279.3 mAh g^(-1),and long-term 500 cycles,superior to carbons from the respective precursor and other reported carbons fabricated under the low carbonization temperature.The present protocol opens new avenues toward low-cost hard carbon anode materials for high-performance sodiumion batteries.

Hard-carbon hybrid Li-ion/metal anode enabled by preferred mesoporous uniform lithium growth mechanism

To achieve high energy density in lithium batteries,the construction of lithium-ion/metal hybrid anodes is a promising strategy.In particular,because of the anisotropy of graphite,hybrid anode formed by graphite/Li metal has low transport kinetics and is easy to causes the growth of lithium dendrites and accumulation of dead Li,which seriously affects the cycle life of batteries and even causes safety problems.Here,by comparing graphite with two types of hard carbon,it was found that hybrid anode formed by hard carbon and lithium metal,possessing more disordered mesoporous structure and lithophilic groups,presents better performance.Results indicate that the mesoporous structure provides abundant active site and storage space for dead lithium.With the synergistic effect of this structure and lithophilic functional groups(–COOH),the reversibility of hard carbon/lithium metal hybrid anode is maintained,promoting uniform deposition of lithium metal and alleviating formation of lithium dendrites.The hybrid anode maintains a 99.5%Coulombic efficiency(CE)after 260 cycles at a specific capacity of 500 m Ah/g.This work provides new insights into the hybrid anodes formed by carbon-based materials and lithium metal with high specific energy and fast charging ability.

Study of the Diffusion Behavior of Seawater Absorption in Multi-Walled Carbon Nanotubes/Halloysite Nanotubes Hybrid Nanofillers Modified Epoxy-Based Glass/Carbon Fiber Composites

In the maritime industry, cost-effective and lightweight Fiber Reinforced Polymer (FRP) composites offer excellent mechanical properties, design flexibility, and corrosion resistance. However, their reliability in harsh seawater conditions is a concern. Researchers address this by exploring three approaches: coating fiber surfaces, hybridizing fibers and matrices with or without nanofillers, and interply rearrangement. This study focuses on evaluating the synergistic effects of interply rearrangement of glass/carbon fibers and hybrid nanofillers, specifically Multi-walled carbon nanotubes (MWCNT) and Halloysite nanotubes (HNT). The aim is to enhance impact properties by minimizing moisture absorption. Hybrid nanocomposites with equal-weight proportions of two nanofillers: 0 wt.%, 1 wt.%, and 2 wt.% were exposed to seawater for 90 days. Experimental data was subjected to modelling through the application of Predictive Fick’s Law. The study found that the hybrid composite containing 2 wt.% hybrid nanofillers exhibited a 22.10% increase in impact performance compared to non-modified counterparts. After 90 days of seawater aging, the material exhibited enhanced resistance to moisture absorption (15.74%) and minimal reduction in impact strength (8.52%) compared to its dry strength, with lower diffusion coefficients.

A perspective on carbon materials for future energy application

Nanocarbon materials play a critical role in the development of new or improved technologies and devices for sustainable production and use of renewable energy. This perspective paper defines some of the trends and outlooks in this exciting area, with the effort of evidencing some of the possibilities offered from the growing level of knowledge, as testified from the exponentially rising number of publications, and putting bases for a more rational design of these nanomaterials. The basic members of the new carbon family are fullerene, graphene, and carbon nanotube. Derived from them are carbon quantum dots, nanohorn, nanofiber, nano ribbon, nanocapsulate, nanocage and other nanomorphologies. Second generation nanocarbons are those which have been modified by surface functionalization or doping with heteroatoms to create specific tailored properties. The third generation of nanocarbons is the nanoarchitectured supramolecular hybrids or composites of the first and second genera- tion nanocarbons, or with organic or inorganic species. The advantages of the new carbon materials, relating to the field of sustainable energy, are discussed, evidencing the unique properties that they offer for developing next generation solar devices and energy storage solutions.

Recent Developments of Transition Metal Compounds-Carbon Hybrid Electrodes for High Energy/Power Supercapacitors

Due to their rapid power delivery,fast charging,and long cycle life,supercapacitors have become an important energy storage technology recently.However,to meet the continuously increasing demands in the fields of portable electronics,transportation,and future robotic technologies,supercapacitors with higher energy densities without sacrificing high power densities and cycle stabilities are still challenged.Transition metal compounds(TMCs)possessing high theoretical capacitance are always used as electrode materials to improve the energy densities of supercapacitors.However,the power densities and cycle lives of such TMCs-based electrodes are still inferior due to their low intrinsic conductivity and large volume expansion during the charge/discharge process,which greatly impede their large-scale applications.Most recently,the ideal integrating of TMCs and conductive carbon skeletons is considered as an effective solution to solve the above challenges.Herein,we summarize the recent developments of TMCs/carbon hybrid electrodes which exhibit both high energy/power densities from the aspects of structural design strategies,including conductive carbon skeleton,interface engineering,and electronic structure.Furthermore,the remaining challenges and future perspectives are also highlighted so as to provide strategies for the high energy/power TMCs/carbon-based supercapacitors.

Synthesis and Characterization of W-doped TiO_2 Supported by Hybrid Carbon Nanomaterials of Multi-walled Carbon Nanotubes and C_(60) Fullerene by a Hydrothermal Method

W-doped TiO2 supported by hybrid carbon nanomaterials of multi-walled carbon nanotubes and C60 fullerene was synthesized by a simple hydrothermal method. The material displayed high visible light photocatalytic activity. X-ray diffraction, field emission transmission electron microscopy, ultra violet/visible light absorption and photoluminescence spectroscopy were used to characterize the material as photoeatalyst. Photocatalytic activity on the degradation of Rhodamine B dye in an aqueous solution under ultraviolet light and visible light irradiation was also studied. The experimental results indicated that the photocatalytic activity of the material was much higher than that of pure TiO2 or Degussa P25 TiO2.

Ball-milling MoS_2/carbon black hybrid material for catalyzing hydrogen evolution reaction in acidic medium

Replacing platinum for catalyzing hydrogen evolution reaction （HER） in acidic medium remains great chal- lenges. Herein, we prepared few-layered MoS2 by ball milling as an efficient catalyst for HER in acidic medium, The activity of as-prepared MoS2 had a strong dependence on the ball milling time, Furthermore, Ketjen Black EC 300J was added into the ball-milled MoS2 followed by a second ball milling, and the resultant MoS2/carbon black hybrid material showed a much higher HER activity than MoS2 and carbon black alone. The enhanced activity of the MoS2/carbon black hybrid material was attributed to the increased abundance of catalytic edge sites of MoS） and excellent electrical coupling to the underlving carbon network.

Effect of carbon nanotube on physical and mechanical properties of natural fiber/glass fiber/cement composites

The objective of this investigation was to introduce a cement-based composite of higher quality. For this purpose new hybrid nanocomposite from bagasse fiber,glass fiber and multi-wall carbon nanotubes（MWCNTs）were manufactured. The physical and mechanical properties of the manufactured composites were measured according to standard methods. The properties of the manufactured hybrid nanocomposites were dramatically better than traditional composites. Also all the reinforced composites with carbon nanotube, glass fiber or bagasse fiber exhibited better properties rather than neat cement.The results indicated that bagasse fiber proved suitable for substitution of glass fiber as a reinforcing agent in the cement composites. The hybrid nanocomposite containing10 % glass fiber, 10 % bagasse fiber and 1.5 % MWCNTs was selected as the best compound.

Effect of Aramid/Carbon Hybrid on the Tensile Properties of Multilayered Biaxial Weft Knitted Fabric Reinforced Composites

The effects of aramid/carbon on tensile properties of multilayered biaxial weft knitted( MBWK) fabric reinforced composites are analyzed by experiments. The tensile tests are inducted by the SHIMADZU AG-250 KNE universal material testing machine and Aramis V6 digital image correlation( DIC) technique.More specifically,the composite samples own four hybrid ratios(Na∶ Nc= 12∶ 0,8 ∶ 4,6 ∶ 6 and 4 ∶ 8). The results showed that the aramid/carbon hybrid MBWK fabric reinforced composites showed nearly linear response until reaching the maximum load and the inserting yarns distribution on the surface of MBWK fabrics reinforced composites had a great influence on the strain pattern distribution. Besides,the tensile strength,the tensile modulus and the elongation at breakage of 0° samples and 90° samples increased with the decreasing of aramid/carbon hybrid ratio. In a word,the changes of tensile strength, tensile modulus and elongation at breakage have a lot to do with the difference of aramid/carbon hybrid ratio.

Thermal conductivity of carbon nanoring linked graphene sheets:A molecular dynamics investigation

Improving the thermal conduction across graphene sheets is of great importance for their applications in thermal management. In this paper, thermal transport across a hybrid structure lbrmed by two graphene nanoribbons and carbon nanorings （CNRs） was investigated by molecular dynamics simulations. The effects of linker diameter, number, and height on thermal conductivity of the CNRs-graphene hybrid structures were studied respectively, and the CNRs were found effective in transmitting the phonon modes of GNRs. The hybrid structure with 2 linkers showed the highest thermal conductivity of 68.8 W·m^-1·K^-1. Our work presents important insight into fundamental principles governing the thermal conduction across CNR junctions and provides useful guideline for designing CNR-graphene structure with superior thermal conductivity.

Early differentiation in biomass production and carbon sequestration of white poplar and its two hybrids in Central Iran

We assessed the potential of white poplar（Populus alba L.） and its inter-sectional hybridization with euphrates poplar（P. euphratica Oliv.） for carbon storage and sequestration in central Iran. Trials were established at planting density of 2,500 trees per hectare in block randomized design with three replicates. After 6 years, we measured the above-ground biomass of tree components（trunk, branch, bark, twig and leaf）, and assessed soil carbon at three depths. P. alba 9 euphratica plantation stored significantly more carbon（22.3 t ha-1） than P. alba（16.7 t ha-1） and P. euphratica 9 alba（13.1 t ha-1）.Most of the carbon was accumulated in the above-ground biomass（61.1 % in P. alba, 72.4 % in P. alba 9 euphratica and 56.0 % in P. euphratica 9 alba）. There was no significant difference in soil carbon storage. Also, biomass allocation was different between white poplar P. alba and its inter-sectional hybridization. Therefore, there was a yield difference due to genomic imprinting, which increased the possibility that paternally and maternally inherited wood production alleles would be differentially expressed in the new crossing.

Regulating adsorption ability toward polysulfides in a porous carbon/Cu_(3)P hybrid for an ultrastable high-temperature lithium-sulfur battery

Lithium-sulfur batteries(LSBs)can work at high temperatures,but they suffer from poor cycle life stability due to the“shuttle effect”of polysulfides.In this study,pollen-derived porous carbon/cuprous phosphide(PC/Cu_(3)P)hybrids were rationally synthesized using a one-step carbonization method using pollen as the source material,acting as the sulfur host for LSBs.In the hybrid,polar Cu_(3)P can markedly inhibit the“shuttle effect”by regulating the adsorption ability toward polysulfides,as confirmed by theoretical calculations and experimental tests.As an example,the camellia pollen porous carbon(CPC)/Cu_(3)P/S electrode shows a high capacity of 1205.6 mAh g^(−1) at 0.1 C,an ultralow capacity decay rate of 0.038%per cycle after 1000 cycles at 1 C,and a rather high initial Coulombic efficiency of 98.5%.The CPC/Cu_(3)P LSBs can work well at high temperatures,having a high capacity of 545.9 mAh g^(−1) at 1 C even at 150℃.The strategy of the PC/Cu_(3)P hybrid proposed in this study is expected to be an ideal cathode for ultrastable high-temperature LSBs.We believe that this strategy is universal and worthy of in-depth development for the next generation energy storage devices.

Wide temperature range,air stable,transparent,and self-powered photodetectors enabled by a hybrid film of graphene and singlewalled carbon nanotubes

Transparent photovoltaic devices(TPVDs)have attracted increasing attention in emerging electronic devices.As the application scenarios extend,there raise higher requirements regarding the stability and operating temperature range of TPVDs.In this work,a unique preparation strategy is proposed for air stable TPVD with a wide operating temperature range,i.e.,a nanoscale architecture termed as H-TPVD is constructed that integrates a free-standing and highly transparent conductive hybrid film of graphene and single-walled carbon nanotubes(G-SWNT TCF for short)with a metal oxide NiO/TiO_(2)heterojunction.The preparation approach is suitable for scaling up.Thanks to the excellent transparent conductivity of the freestanding G-SWNT hybrid film and the ultrathin NiO/TiO_(2)heterojunction(100 nm),H-TPVD selectively absorbs the ultraviolet(UV)band of sunlight and has a transparency of up to 71%in the visible light.The integrated nanoscale architecture manifests the significant holecollecting capability of the G-SWNT hybrid film and the efficient carrier generation and separation within the ultrathin NiO/TiO_(2)heterojunction,resulting in excellent performance of the H-TPVD with a specific detectivity of 2.7×10^(10) Jones.Especially,the freestanding G-SWNT TCF is a super stable and non-porous two-dimensional film that can insulate gas molecules,thereby protecting the surface properties of NiO/TiO_(2)heterojunctions and enhancing the stability of H-TPVD.Having subjected to 20,000 cycles and storage in air for three months,the performance parameters such as photo-response signal,output power,and specific detectivity show no noticeable degradation.In particular,the as-fabricated self-powered H-TPVD can operate over a wide temperature range from −180 to 300℃,and can carry out solar-blind UV optical communication in this range.In addition,the 4×4 array H-TPVD demonstrates clear optical imaging.These results make it possible for H-TPVD to expand its potential application scenarios.

The roles of graphene in advanced Li-ion hybrid supercapacitors

Lithium-ion hybrid supercapacitors （LIHSs）, also called Li-ion capacitors, are electrochemical energy stor- age devices that combining the advantages of high power density of supercapacitor and high energy density of Li-ion battery. However, high power density and long cycle life are still challenges for the cul~ rent LIHSs due to the imbalance of charge-storage capacity and electrode kinetics between capacitor-type cathode and battery-type anode. Therefore, great efforts have been made on designing novel cathode materials with high storage capacity and anode material with enhanced kinetic behavior for LIHSs. With unique two-dimensional form and numerous appealing properties, for the past several years, the rational designed graphene and its composites materials exhibit greatly improved electrochemical performance as cathode or anode for LIHSs. Here, we summarized and discussed the latest advances of the state- of-art graphene-based materials for LIHSs applications. The major roles of graphene are highlighted as （1） a superior active material, （2） ultrathin 2D flexible support to remedy the sluggish reaction of the metal compound anode, and （3） good 2D building blocks for constructing macroscopic 3D pOFOUS car- bonjgraphene hybrids. In addition, some high performance aqueous LIHSs using graphene as electrode were also summarized. Finally, the perspectives and challenges are also proposed for further develop- ment of more advanced graphene-based LIHSs.

Laser welding process and strength enhancement of carbon fiber reinforced thermoplastic composites and metals dissimilar joint:A review

Carbon fiber reinforced thermoplastic composites(CFRTP)and metals hybrid structures have been widely used in aircraft lightweight manufacturing.However,due to the significant difference in physical and chemical properties between CFRTP and metals,there are lots of challenges to connect them with high quality.Laser welding has a good application prospect in CFRTP and metals connection,and a significant research progress has been made in the exploration of CFRTP-metal laser joining mechanism,joining process optimization,joining strength improvement and joining defects controlling.However,there are still some problems need to be solved for this technology application.In this paper,the research progress of CFRTP-metal laser joining was summarized in three major aspects:theoretical modeling and simulation analysis,process exploration and parameter optimization,joint performance improvement and process innovation.And,problems and challenges of this technology were discussed,and the outlook of this research was provided.

MXenes/CNTs-based hybrids:Fabrications,mechanisms,and modification strategies for energy and environmental applications

Emerging two-dimensional(2D)layered metal carbide and nitride materials,commonly termed MXenes,are increasingly recognized for their applications across diverse fields such as energy,environment,and catalysis.In the past few years,MXenes/carbon nanotubes(CNTs)-based hybrids have attracted extensive attention as an important catalyst in energy and environmental fields,due to their superior multifunctions and mechanical stability.This review aims to address the fabrication strategies,the identification of the enhancement mechanisms,and recent progress regarding the design and modification of MXenes/CNTs-based hybrids.A myriad of fabrication techniques have been systematically summarized,including mechanical mixing,spray drying,three-dimensional(3D)printing,self-assembly/in-situ growth,freeze drying,templating,hydrothermal methods,chemical vapor deposition(CVD),and rolling.Importantly,the identification of the enhancement mechanisms was thoroughly discussed from the two dimensions of theoretical simulations and in-situ analysis.Moreover,the recent advancements in profound applications of MXenes/CNTs-based hybrids have also been carefully revealed,including energy storage devices,sensors,water purification systems,and microwave absorption.We also underscore anticipated challenges related to their fabrication,structure,underlying mechanisms,modification approaches,and emergent applications.Consequently,this review offers insights into prospective directions and the future trajectory for these promising hybrids.It is expected that this review can inspire new ideas or provide new research methods for future studies.

Bismuth oxide nanoflake@carbon film: A free-standing battery-type electrode for aqueous sodium ion hybrid supercapacitors

Aqueous hybrid supercapacitors are promising due to their low cost and high safety. Herein, a freestanding battery-type electrode of Bi2O3 nanoflake@C on carbon cloth is designed for aqueous sodium ion hybrid supercapacitors. Due to the integration of nanoarray architecture and the conductive carbon,the Bi2O3@C electrode exhibits a high specific capacity of 207 mAh/g at 2 A/g（6C）, good rate capability and cycling stability（133 m Ah/g after 1000 cycles）. With the activated carbon as the capacitive electrode and neutral sodium salts as the electrolyte, a 1.9 V hybrid supercapacitor is assembled,delivering a high energy density of 18.94 Wh/kg. The device can still maintain 72.3% of initial capacity after 650 cycles. The present work holds great promise for developing next-generation hybrid supercapacitors.

Numerical simulation and experimental study on electrothermal properties of carbon/glass fiber hybrid textile reinforced concrete

Carbon/glass fiber hybrid textile reinforced concrete is a relatively new composite material with good mechanical capacity and excellent electrical conductivity.Both small-scale slab heating experiments and numerical simulation are presented in this paper.Temperature variation curves obtained during heating indicate the effects of environmental temperature,heat-conducting layer thickness and electric heating power.Comparison of temperature rising between the situations with and without thermal isolation layer is given as well.The results indicate that the textile can form a good conductive heating network and generate enough heat to raise the temperature in the concrete when connected to a power supply,while the resistance of the slab remains stable during the heating.Numerical results are in good accordance with the experiments.Real time snow-melting experiment was conducted to verify the feasibility of deicing.The electrothermal properties of textile can be utilized for deicing and snow melting in a safe,environmentally friendly and efficient way.

Lithiophilic N-doped carbon bowls induced Li deposition in layered graphene film for advanced lithium metal batteries

Lithium(Li)metal with high theoretical capacity and low electrochemical potential is the most ideal anode for next-generation high-energy batteries.However,the practical implementation of Li anode has been hindered by dendritic growth and volume expansion during cycling,which results in low Coulombic efficiency(CE),short lifespan,and safety hazards.Here,we report a highly stable and dendrite-free Li metal anode by utilizing N-doped hollow porous bowl-like hard carbon/reduced graphene nanosheets(CB@rGO)hybrids as three-dimensional(3D)conductive and lithiophilic scaffold host.The lithiophilic carbon bowl(CB)mainly works as excellent guides during the Li plating process,whereas the rGO layer with high conductivity and mechanical stability maintains the integrity of the composite by confining the volume change in long-range order during cycling.Moreover,the local current density can be reduced due to the 3D conductive framework.Therefore,CB@rGO presents a low lithium metal nucleation overpotential of 18 mV,high CE of 98%,and stable cycling without obvious voltage fluctuation for over 600 cycles at a current density of 1 mA cm^(-2).Our study not only provides a good CB@rGO host and pre-Lithiated CB@rGO composite anode electrode,but also brings a new strategy of designing 3D electrodes for those active materials suffering from severe volume expansion.