New energy sources that reduce the volume of harmful gases such as SO_(x)and NO_(x)released into the atmosphere are in constant development.Natural gas,primarily made up of methane,is being widely used as one reliable...New energy sources that reduce the volume of harmful gases such as SO_(x)and NO_(x)released into the atmosphere are in constant development.Natural gas,primarily made up of methane,is being widely used as one reliable energy source for heating and electricity generation due to its high combustion value.Currently,natural gas accounts for a large portion of electricity generation and chemical feedstock in manufacturing plastics and other commercially important organic chemicals.In the near future,natural gas will be widely used as a fuel for vehicles.Therefore,a practical storage device for its storage and transportation is very beneficial to the deployment of natural gas as an energy source for new technologies.In this tutorial review,biomaterials-based carbon monoliths(CMs),one kind of carbonaceous material,was reviewed as an adsorbent for natural gas(methane)adsorption and storage.展开更多
Mesoporous carbon monolith was synthesized by the direct carbonization of compressed sucrose/silica composite, which was prepared by using sol-gel method. The structural and textural properties of the materials were i...Mesoporous carbon monolith was synthesized by the direct carbonization of compressed sucrose/silica composite, which was prepared by using sol-gel method. The structural and textural properties of the materials were investigated by XRD, DRIFT, N2-adsorption and SEM. The characterization study shows that the resultant carbon monolith possesses a relatively high surface area, large pore volume and well interconnected pore system. Addition of a certain amount of citric acid or aluminum nitrate into the sol-gel precursor of sucrose/silica composite could considerably change the structure parameters of the carbon monolith.展开更多
Porous carbon materials with developed porosity,high surface area and good thermal-and chemicalresistance are advantageous for gas adsorption and separation.However,most carbon adsorbents are in powder form which exhi...Porous carbon materials with developed porosity,high surface area and good thermal-and chemicalresistance are advantageous for gas adsorption and separation.However,most carbon adsorbents are in powder form which exhibit high pressure drop when deployed in practical separation bed.While monolithic carbons have largely addressed the pulverization problem and preserved kinetics and usually suffer from abrasion during multiple adsorption-desorption cycles.Herein,we proposed the designed synthesis of mechanically robust carbon monoliths with hierarchical pores,solid nitrogen-containing framework.The synthesis started with the polymerization of resorcinol and formaldehyde under weakly acidic conditions generated from cyanuric acid,and then an appropriate amount of hexamethylenetetramine(HMTA)was added as a crosslinker to prompt the formation of three dimensional frameworks.After carbonization process,the as-obtained porous carbon monoliths have a high radial compressive strength of 886 N/cm as well as a BET specific surface area of up to 683 m2/g.At approximately 1 bar,the CO2 equilibrium capacities of the monoliths are in the range of 3.1–4.0 mmol/g at 273 K and of 2.3–3.0 mmol/g at 298 K,exhibiting high selectivity for the capture of CO2 over N2 from a stream which consists of 16.7%(v%)CO2 in N2.Meanwhile,they undergo a facile CO2 release in an argon stream at 298 K,indicating a good regeneration capacity.After cycle testing,sieving and regeneration,the adsorbent has no mass loss,compared to that of its fresh counterpart.展开更多
Methane adsorption by different forms of activated carbon obtained from coffee husks, including monolith honeycomb and disc types, was studied by activation with zinc salts and potassium hydroxide at 298.15 K and 303....Methane adsorption by different forms of activated carbon obtained from coffee husks, including monolith honeycomb and disc types, was studied by activation with zinc salts and potassium hydroxide at 298.15 K and 303.15 K and pressures up to 30.00 atm in a volumetric adsorption apparatus. We observed increased methane adsorption capacity on a mass basis in the different activated carbon monoliths with increasing surface area, total pore volume and micropore volume, with the honeycomb type displaying the highest methane absorption capacity. The maximum volumetric methane uptake by the synthesised carbon monoliths was observed to be 130 V/V at 298.15 K and 30.00 atm for honeycomb monoliths synthesised with zinc chloride (ZnCl2) and Polyvinyl alcohol (PVA) as the binder. Adsorption calorimetry results were used to describe the interaction between guest molecules and the adsorbent at low surface coverage and the energetic heterogeneous surface nature of the adsorbent.展开更多
Utilizing solar energy for sorbent regeneration during the CO_(2)swing adsorption process could potentially reduce CO_(2)capture costs.This study describes a new technique—solar thermal swing adsorption(STSA)for CO_(...Utilizing solar energy for sorbent regeneration during the CO_(2)swing adsorption process could potentially reduce CO_(2)capture costs.This study describes a new technique—solar thermal swing adsorption(STSA)for CO_(2)capture based on application of intermittent illumination onto porous carbon monolith(PCM)sorbents during the CO_(2)capture process.This allows CO_(2)to be selectively adsorbed on the sorbents during the light-off periods and thereafter released during the light-on periods due to the solar thermal effect.The freestanding and mechanically strong PCMs have rich ultramicropores with narrow pore size distributions,displaying relatively high CO_(2)adsorption capacity and high CO_(2)/N_(2) selectivity.Given the high CO_(2)capture performance,high solar thermal conversion efficiency,and high thermal conductivity,the PCM sorbents could achieve high CO_(2)capture rate of up to 0.226 kg·kgcarbon^(-1)·h^(-1)from a gas mixture of 20 vol.%CO_(2)/80 vol.%N_(2) under STSA conditions with a light intensity of 1000 W·m^(-2).In addition,the combination of STSA with the conventional vacuum swing adsorption technique further increases the CO_(2)working capacity.展开更多
The advancement of supercapacitors(SCs)is closely bound up with the breakthrough of rational design of energy materials.Freestanding and thick carbon(FTC)materials with well-organized porous structure is promising SC ...The advancement of supercapacitors(SCs)is closely bound up with the breakthrough of rational design of energy materials.Freestanding and thick carbon(FTC)materials with well-organized porous structure is promising SC electrode delivering high areal capacitive performance.However,controllable and sustainable fabrication of such FTC electrode is still of great challenges.Inspired by natural honeycombs with cross-linked multichannel structure,herein,an innovative molecular-cooperative-interaction strategy is elaborately provided to realize honeycomb-like FTC electrodes.The nitrogen-doped porous carbon monolith(N-PCM)is obtained with advantages of interconnect pore structure and abundant nitrogen doping.Such strategy is based on naturally abundant molecular precursors,and free of pore-templates,expensive polymerization catalyst,and dangerous reaction solvent,rendering it a sustainable and cost-effective process.Systematic control experiments reveal that strong interactions among molecular precursors promise the structural stability of N-PCM during carbonization,and rational selection of molecular precursors with chemical blowing features is key step for well-developed honeycomb-like pore structure.Interestingly,the optimized sample exhibits hierarchical pore structure with specific surface area of 626.4 m^(2)g^(-1)and rational N-doping of 7.01 wt%.The derived SC electrode with high mass loading of 40.1 mg cm^(-2)shows an excellent areal capacitance of 3621 mF cm^(-2)at 1 mA cm^(-2)and good rate performance with 2920 mF cm^(-2)at 25 mA cm^(-2).Moreover,the constructed aqueous symmetric SC and quasi-solid-state SC produce high energy densities of 0.32 and 0.27 mWh cm^(-2),respectively.We believe that such a composition/microstructure controllable method can promote the fabrication and development of other thick electrodes for energy storage devices.展开更多
The novel and facile preparation of magnetically interconnected micro/macroporous structure of monolithic porous carbon adsorbent(MPCA)were designed and presented herein.The synthesis was achieved via conventional fre...The novel and facile preparation of magnetically interconnected micro/macroporous structure of monolithic porous carbon adsorbent(MPCA)were designed and presented herein.The synthesis was achieved via conventional freezedrying and pyrolysis processes.In this study,sodium alginate and wasted black liquor were employed as starting precursors.Sodium alginate acts as a template of materials,whereas black liquor,the wasted product from the paper industry with plentiful of lignin content and alkaline solution,played an essential role in the reinforcement and activation of porosity for the resulting materials.Moreover,both the precursors were well dissolved in Fe^(3+) solution,providing a simple addition of a magnetic source in a one-pot synthesis.The interconnected micro/macroporous structures were generated through freeze-drying and,subsequently the pyrolysis process.The obtained cylindricalshaped monolithic porous carbon adsorbent(MPCA-700)showed high mechanical stability,a high BET specific surface area(902 m^(2)/g).Such aforementioned features were considered suitable to make the synthesized monolith as an adsorbent for the removal of heavy metal ions.The maximum adsorption capacity of MPCA-700 towards Pb^(2+) ions was 76.34 mg/g at pH 5.The adsorption studies illustrated that adsorption kinetics and isotherm perfectly fitted with the pseudo-second-order kinetics model and Langmuir isotherm,respectively.This work presents a promising protocol to reduce the overall costs in the preparation of renewable adsorbents with good adsorption efficiency and regeneration.展开更多
Silver coatings on the exterior surface of monolithic activated carbon（MAC） with different morphology were prepared by directly immersing MAC into [Ag（NH3）2]NO3 solution. Acid and base treatments were employed to ...Silver coatings on the exterior surface of monolithic activated carbon（MAC） with different morphology were prepared by directly immersing MAC into [Ag（NH3）2]NO3 solution. Acid and base treatments were employed to modify the surface oxygenic groups of MAC, respectively. The MACs＇ Brunauer-EmmettTeller（BET） surface area, surface groups, and silver coating morphology were characterized by N2 adsorption, elemental analysis（EA）, X-ray photoelectron spectroscopy（XPS）, and scanning electron microscopy（SEM）, respectively. The coating morphology was found to be closely related to the surface area and surface functional groups of MAC. For a raw MAC which contained a variety of oxygenic groups, HNO3 treatment enhanced the relative amount of highly oxidized groups such as carboxyl and carbonates, which disfavored the deposition of silver particles. By contrast, Na OH treatment significantly improved the amount of carbonyl groups, which in turn improved the deposition amount of silver. Importantly, lamella silver was produced on raw MAC while Na OH treatment resulted in granular particles because of the capping effect of carbonyl groups. At appropriate [Ag（NH3）2]NO3 concentrations, silver nanoparticles smaller than 100 nm were homogeneously dispersed on Na OH-treated MAC. The successful tuning of the size and morphology of silver coatings on MAC is promising for novel applications in air purification and for antibacterial or aesthetic purposes.展开更多
Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the s...Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal （Na, K） oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess.展开更多
Based on the newly developed bonding system,a new generation of carbon-bonded MgO-C monolithic refractories product with low toxic potential has been developed. Results ofan on-going investigation on properties of MgO...Based on the newly developed bonding system,a new generation of carbon-bonded MgO-C monolithic refractories product with low toxic potential has been developed. Results ofan on-going investigation on properties of MgO-C monolithic refractories with tar-resin as binder are presented. Furthermore,the binder is an extremely strong carbon bonding. Further significant advantages of this system are high oxidation resistance of the highly-ordered carbon structure and the excellent stress-absorbing structure. To improve the strength anderosion resistance,and to decrease evaporation during heating,a preliminary treated tar-resin with higher melting temperature and lower content of volatile component was investigated. The binder specimens were treatedat 800℃ and the mechanical properties of MgO-C re-fractories specimens treated at 200,400,and 1 200℃ were determined.展开更多
A new route to synthesize ZSM-5 monoliths with hierarchical pore structure has been referred to in this study. The successful incorporation of the macropores and mesopores within the ZSM-5 struc- ture was achieved thr...A new route to synthesize ZSM-5 monoliths with hierarchical pore structure has been referred to in this study. The successful incorporation of the macropores and mesopores within the ZSM-5 struc- ture was achieved through transforming the skeleton of the macroporous silica gel into zeolite ZSM-5 using carbon materials as the transitional template. The ZSM-5 crystal covered part of the macroporous material, and provided micropores to the macroporous silica gel. The structure of carbon monolith was studied after dissolving the silica contained in the carbon/silica composite.展开更多
基金Acknowledgment is made to the Donors of the American Chemical Society Petroleum Research Fund for support of this research.
文摘New energy sources that reduce the volume of harmful gases such as SO_(x)and NO_(x)released into the atmosphere are in constant development.Natural gas,primarily made up of methane,is being widely used as one reliable energy source for heating and electricity generation due to its high combustion value.Currently,natural gas accounts for a large portion of electricity generation and chemical feedstock in manufacturing plastics and other commercially important organic chemicals.In the near future,natural gas will be widely used as a fuel for vehicles.Therefore,a practical storage device for its storage and transportation is very beneficial to the deployment of natural gas as an energy source for new technologies.In this tutorial review,biomaterials-based carbon monoliths(CMs),one kind of carbonaceous material,was reviewed as an adsorbent for natural gas(methane)adsorption and storage.
基金Supported by the National Natural Science Foundation of China(Nos.20403006 and 20773050)the State Basic Research Project of China(No.2005CB221405)
文摘Mesoporous carbon monolith was synthesized by the direct carbonization of compressed sucrose/silica composite, which was prepared by using sol-gel method. The structural and textural properties of the materials were investigated by XRD, DRIFT, N2-adsorption and SEM. The characterization study shows that the resultant carbon monolith possesses a relatively high surface area, large pore volume and well interconnected pore system. Addition of a certain amount of citric acid or aluminum nitrate into the sol-gel precursor of sucrose/silica composite could considerably change the structure parameters of the carbon monolith.
基金financially supported by a Joint Sino-German Research Project(21761132011)the National Natural Science Foundation of China(No.21776041)the Cheung Kong Scholars Programme of China(T2015036).
文摘Porous carbon materials with developed porosity,high surface area and good thermal-and chemicalresistance are advantageous for gas adsorption and separation.However,most carbon adsorbents are in powder form which exhibit high pressure drop when deployed in practical separation bed.While monolithic carbons have largely addressed the pulverization problem and preserved kinetics and usually suffer from abrasion during multiple adsorption-desorption cycles.Herein,we proposed the designed synthesis of mechanically robust carbon monoliths with hierarchical pores,solid nitrogen-containing framework.The synthesis started with the polymerization of resorcinol and formaldehyde under weakly acidic conditions generated from cyanuric acid,and then an appropriate amount of hexamethylenetetramine(HMTA)was added as a crosslinker to prompt the formation of three dimensional frameworks.After carbonization process,the as-obtained porous carbon monoliths have a high radial compressive strength of 886 N/cm as well as a BET specific surface area of up to 683 m2/g.At approximately 1 bar,the CO2 equilibrium capacities of the monoliths are in the range of 3.1–4.0 mmol/g at 273 K and of 2.3–3.0 mmol/g at 298 K,exhibiting high selectivity for the capture of CO2 over N2 from a stream which consists of 16.7%(v%)CO2 in N2.Meanwhile,they undergo a facile CO2 release in an argon stream at 298 K,indicating a good regeneration capacity.After cycle testing,sieving and regeneration,the adsorbent has no mass loss,compared to that of its fresh counterpart.
文摘Methane adsorption by different forms of activated carbon obtained from coffee husks, including monolith honeycomb and disc types, was studied by activation with zinc salts and potassium hydroxide at 298.15 K and 303.15 K and pressures up to 30.00 atm in a volumetric adsorption apparatus. We observed increased methane adsorption capacity on a mass basis in the different activated carbon monoliths with increasing surface area, total pore volume and micropore volume, with the honeycomb type displaying the highest methane absorption capacity. The maximum volumetric methane uptake by the synthesised carbon monoliths was observed to be 130 V/V at 298.15 K and 30.00 atm for honeycomb monoliths synthesised with zinc chloride (ZnCl2) and Polyvinyl alcohol (PVA) as the binder. Adsorption calorimetry results were used to describe the interaction between guest molecules and the adsorbent at low surface coverage and the energetic heterogeneous surface nature of the adsorbent.
基金This study was supported byÅForsk research grant and Anhui Provincial Natural Science Foundation(No.2108085QB72)。
文摘Utilizing solar energy for sorbent regeneration during the CO_(2)swing adsorption process could potentially reduce CO_(2)capture costs.This study describes a new technique—solar thermal swing adsorption(STSA)for CO_(2)capture based on application of intermittent illumination onto porous carbon monolith(PCM)sorbents during the CO_(2)capture process.This allows CO_(2)to be selectively adsorbed on the sorbents during the light-off periods and thereafter released during the light-on periods due to the solar thermal effect.The freestanding and mechanically strong PCMs have rich ultramicropores with narrow pore size distributions,displaying relatively high CO_(2)adsorption capacity and high CO_(2)/N_(2) selectivity.Given the high CO_(2)capture performance,high solar thermal conversion efficiency,and high thermal conductivity,the PCM sorbents could achieve high CO_(2)capture rate of up to 0.226 kg·kgcarbon^(-1)·h^(-1)from a gas mixture of 20 vol.%CO_(2)/80 vol.%N_(2) under STSA conditions with a light intensity of 1000 W·m^(-2).In addition,the combination of STSA with the conventional vacuum swing adsorption technique further increases the CO_(2)working capacity.
基金Guangdong Science and Technology Department,Grant/Award Number:2020B0909030004National Natural Science Foundation of China,Grant/Award Number:21975026。
文摘The advancement of supercapacitors(SCs)is closely bound up with the breakthrough of rational design of energy materials.Freestanding and thick carbon(FTC)materials with well-organized porous structure is promising SC electrode delivering high areal capacitive performance.However,controllable and sustainable fabrication of such FTC electrode is still of great challenges.Inspired by natural honeycombs with cross-linked multichannel structure,herein,an innovative molecular-cooperative-interaction strategy is elaborately provided to realize honeycomb-like FTC electrodes.The nitrogen-doped porous carbon monolith(N-PCM)is obtained with advantages of interconnect pore structure and abundant nitrogen doping.Such strategy is based on naturally abundant molecular precursors,and free of pore-templates,expensive polymerization catalyst,and dangerous reaction solvent,rendering it a sustainable and cost-effective process.Systematic control experiments reveal that strong interactions among molecular precursors promise the structural stability of N-PCM during carbonization,and rational selection of molecular precursors with chemical blowing features is key step for well-developed honeycomb-like pore structure.Interestingly,the optimized sample exhibits hierarchical pore structure with specific surface area of 626.4 m^(2)g^(-1)and rational N-doping of 7.01 wt%.The derived SC electrode with high mass loading of 40.1 mg cm^(-2)shows an excellent areal capacitance of 3621 mF cm^(-2)at 1 mA cm^(-2)and good rate performance with 2920 mF cm^(-2)at 25 mA cm^(-2).Moreover,the constructed aqueous symmetric SC and quasi-solid-state SC produce high energy densities of 0.32 and 0.27 mWh cm^(-2),respectively.We believe that such a composition/microstructure controllable method can promote the fabrication and development of other thick electrodes for energy storage devices.
基金This work was funded by Development and Promotion of Science Technology Talents(DPST)Research Grant(Grant No.017/2559)the Institute for the Promotion of Teaching Science and Technology(IPST),Thailand.
文摘The novel and facile preparation of magnetically interconnected micro/macroporous structure of monolithic porous carbon adsorbent(MPCA)were designed and presented herein.The synthesis was achieved via conventional freezedrying and pyrolysis processes.In this study,sodium alginate and wasted black liquor were employed as starting precursors.Sodium alginate acts as a template of materials,whereas black liquor,the wasted product from the paper industry with plentiful of lignin content and alkaline solution,played an essential role in the reinforcement and activation of porosity for the resulting materials.Moreover,both the precursors were well dissolved in Fe^(3+) solution,providing a simple addition of a magnetic source in a one-pot synthesis.The interconnected micro/macroporous structures were generated through freeze-drying and,subsequently the pyrolysis process.The obtained cylindricalshaped monolithic porous carbon adsorbent(MPCA-700)showed high mechanical stability,a high BET specific surface area(902 m^(2)/g).Such aforementioned features were considered suitable to make the synthesized monolith as an adsorbent for the removal of heavy metal ions.The maximum adsorption capacity of MPCA-700 towards Pb^(2+) ions was 76.34 mg/g at pH 5.The adsorption studies illustrated that adsorption kinetics and isotherm perfectly fitted with the pseudo-second-order kinetics model and Langmuir isotherm,respectively.This work presents a promising protocol to reduce the overall costs in the preparation of renewable adsorbents with good adsorption efficiency and regeneration.
基金Funded by the Interdisciplinary Program of Shanghai Jiao Tong University(YG2016MS24)
文摘Silver coatings on the exterior surface of monolithic activated carbon（MAC） with different morphology were prepared by directly immersing MAC into [Ag（NH3）2]NO3 solution. Acid and base treatments were employed to modify the surface oxygenic groups of MAC, respectively. The MACs＇ Brunauer-EmmettTeller（BET） surface area, surface groups, and silver coating morphology were characterized by N2 adsorption, elemental analysis（EA）, X-ray photoelectron spectroscopy（XPS）, and scanning electron microscopy（SEM）, respectively. The coating morphology was found to be closely related to the surface area and surface functional groups of MAC. For a raw MAC which contained a variety of oxygenic groups, HNO3 treatment enhanced the relative amount of highly oxidized groups such as carboxyl and carbonates, which disfavored the deposition of silver particles. By contrast, Na OH treatment significantly improved the amount of carbonyl groups, which in turn improved the deposition amount of silver. Importantly, lamella silver was produced on raw MAC while Na OH treatment resulted in granular particles because of the capping effect of carbonyl groups. At appropriate [Ag（NH3）2]NO3 concentrations, silver nanoparticles smaller than 100 nm were homogeneously dispersed on Na OH-treated MAC. The successful tuning of the size and morphology of silver coatings on MAC is promising for novel applications in air purification and for antibacterial or aesthetic purposes.
文摘Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal （Na, K） oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess.
文摘Based on the newly developed bonding system,a new generation of carbon-bonded MgO-C monolithic refractories product with low toxic potential has been developed. Results ofan on-going investigation on properties of MgO-C monolithic refractories with tar-resin as binder are presented. Furthermore,the binder is an extremely strong carbon bonding. Further significant advantages of this system are high oxidation resistance of the highly-ordered carbon structure and the excellent stress-absorbing structure. To improve the strength anderosion resistance,and to decrease evaporation during heating,a preliminary treated tar-resin with higher melting temperature and lower content of volatile component was investigated. The binder specimens were treatedat 800℃ and the mechanical properties of MgO-C re-fractories specimens treated at 200,400,and 1 200℃ were determined.
文摘A new route to synthesize ZSM-5 monoliths with hierarchical pore structure has been referred to in this study. The successful incorporation of the macropores and mesopores within the ZSM-5 struc- ture was achieved through transforming the skeleton of the macroporous silica gel into zeolite ZSM-5 using carbon materials as the transitional template. The ZSM-5 crystal covered part of the macroporous material, and provided micropores to the macroporous silica gel. The structure of carbon monolith was studied after dissolving the silica contained in the carbon/silica composite.
