In this paper, X-ray diffractogram analysis and SEM observation of Al$ C$ formed at high temperature from carbon-containing refractories ivith Al have been carried out. Aluminum added to carbon-containing refractories...In this paper, X-ray diffractogram analysis and SEM observation of Al$ C$ formed at high temperature from carbon-containing refractories ivith Al have been carried out. Aluminum added to carbon-containing refractories reacts with C(s) to form Al^ C^(s) gradually during heating from 600 ’C to 1200^0 . It is considered that the interlocked structure of Al^ C-$ plate crystals promotes the outstanding increase of hot modulus of rupture of carbon-containing refractories with Al. The HMOR of carbon-containing refractories added with Al additive from 0 to 5wt% increases by 2.8 times being from 6.5MPa to 18.2MPa. After a thermochemical calculation for hydration reaction processes ofAl^C^ and H^O (g), the equilibrium partial pressure chart ofH^O (g) in H^O-A^C^-Al^ OH)} system vs various temperatures has been attained . The H2 0 (g) partial pressure in the air needed for the Al^ C3 hydration reaction is no more than 10;18 atm at the temperature below 120t . It is considered that the burned carbon-containing re展开更多
Gaseous phases of carbon-containing and metastable oxides will be resulted from the carbonization of phenolic resin binders and the reduced reactions between C and oxides at high temperatures in carbon-containing refr...Gaseous phases of carbon-containing and metastable oxides will be resulted from the carbonization of phenolic resin binders and the reduced reactions between C and oxides at high temperatures in carbon-containing refractories. With the in-situ catalysis technique, these gaseous phases can be transformed to one-or two-dimensional bonding phases by deposition,which is favorable for the improvement on strength and toughness of carboncontaining refractories,especially low carbon refractories. The research results reveal that:( 1) the amorphous carbon resulted from phenolic resin can be transformed to carbon nanotubes,thus,the oxidation peak temperature is raised from 506 to 664. 6 ℃;( 2) onedimensional whiskers of MgO or Mg Al2 O4 can be in-situ formed in MgO-C refractories, and their CMOR,CCS,rupture displacement and residual CCS( two water quenching cycles,1 100 ℃) are increased by 66%,47%,13% and 26%,respectively;( 3) two-dimensional array structure of flake β-SiAlON can be in-situ formed in Al2 O3-C refractories,which improves the material strength by 60% and decreases the residual strength after thermal shock by only 4. 5 MPa. It is believed that the in-situ formation of one-or two-dimensional bonding phases at high temperatures can improvethe comprehensive thermal physical properties of carboncontaining refractories,and will be the developing trend of the strengthening and toughening of low carbon-containing refractories.展开更多
Due to thermal stability and excellent resistance to slag erosion,the used refractories can be recycled as the main raw material for some refractories.In this article the latest developments about used refractories in...Due to thermal stability and excellent resistance to slag erosion,the used refractories can be recycled as the main raw material for some refractories.In this article the latest developments about used refractories in metallurgical industry has been reviewed,focusing on the results reported in the past decade.The research and reutilization methods of used refractories were discussed.For the research of used refractories,the results of two aspects,the performance and surface corrosion characteristics,are summarized.Then,the advances in research on recycling technology of several main kinds of used refractories,such as MgO-C,Al2O3-SiC-C,Al2O3-MgO-C,magnesium-chrome,and corundum-spinel refractories were summarized and discussed in detail.Some results of the author’s group were reported等线accompanied by these comments.The microstructure and chemical composition were studied by scanning electron microscopy and energy dispersion spectra,and the properties of the refractories were analyzed.Afterwards,the scope of application of materials was determined according to the classification and analysis of refractories.Finally,the large-scale application of used refractories and an outlook is given to future developments of the entire recycling industry.展开更多
The paper analyzed the recycle condition and developing trend of used refractories China and other countries, irwluding research achievements of recycles of used refractories such as MgO-C bricks, Al2O3-MgO-C brics, A...The paper analyzed the recycle condition and developing trend of used refractories China and other countries, irwluding research achievements of recycles of used refractories such as MgO-C bricks, Al2O3-MgO-C brics, Al2O3-SiC-C castable and MgO-Cr2O3 bricks. Recycled refractories exhibit the same or even better properties as compared with the original. In addition, prospects for recycle of used refractories are also discusseded.展开更多
The rapid development of iron and steel metallurgy technology has promoted the continuous innovation and iteration of carbon-containing refractories for clean steel smelting.To meet the high-quality requirements for c...The rapid development of iron and steel metallurgy technology has promoted the continuous innovation and iteration of carbon-containing refractories for clean steel smelting.To meet the high-quality requirements for clean steel production and full exploit the performance advantages of carbon-containing refractories in dynamic smelting environment,it is necessary to explore the role of graphite and modified graphite in carbon-containing refractories.Based on this,graphite surface modification methods,including surfactants,surface oxidation,and surface coating,and their applications in carbon-containing refractories are reviewed.The advantages and disadvantages of each method are analyzed for practical use.Furthermore,combined with the existing problems,the application prospect of improved graphite in carbon-containing refractories is discussed.展开更多
It has been reported that a 92-year-old female had got a bruise superficial wound on her right leg one and a half years ago,developing into refractory skin ulcer due to improper management before.A prepared cream,mixe...It has been reported that a 92-year-old female had got a bruise superficial wound on her right leg one and a half years ago,developing into refractory skin ulcer due to improper management before.A prepared cream,mixed royal jelly with berberine for dressing change,was made on the scene through the crush of berberine tablets,working with fresh royal jelly.Topical dressing change with the cream was done every 3 days,and two months later,such the ulcer became clean and was covered fully with fresh granulation tissue.This kind of cream consists of the ingredients of TCM purely,free of antibiotic,and being quite effective clinically,also helpful for proper use of antibiotic.展开更多
文摘In this paper, X-ray diffractogram analysis and SEM observation of Al$ C$ formed at high temperature from carbon-containing refractories ivith Al have been carried out. Aluminum added to carbon-containing refractories reacts with C(s) to form Al^ C^(s) gradually during heating from 600 ’C to 1200^0 . It is considered that the interlocked structure of Al^ C-$ plate crystals promotes the outstanding increase of hot modulus of rupture of carbon-containing refractories with Al. The HMOR of carbon-containing refractories added with Al additive from 0 to 5wt% increases by 2.8 times being from 6.5MPa to 18.2MPa. After a thermochemical calculation for hydration reaction processes ofAl^C^ and H^O (g), the equilibrium partial pressure chart ofH^O (g) in H^O-A^C^-Al^ OH)} system vs various temperatures has been attained . The H2 0 (g) partial pressure in the air needed for the Al^ C3 hydration reaction is no more than 10;18 atm at the temperature below 120t . It is considered that the burned carbon-containing re
文摘Gaseous phases of carbon-containing and metastable oxides will be resulted from the carbonization of phenolic resin binders and the reduced reactions between C and oxides at high temperatures in carbon-containing refractories. With the in-situ catalysis technique, these gaseous phases can be transformed to one-or two-dimensional bonding phases by deposition,which is favorable for the improvement on strength and toughness of carboncontaining refractories,especially low carbon refractories. The research results reveal that:( 1) the amorphous carbon resulted from phenolic resin can be transformed to carbon nanotubes,thus,the oxidation peak temperature is raised from 506 to 664. 6 ℃;( 2) onedimensional whiskers of MgO or Mg Al2 O4 can be in-situ formed in MgO-C refractories, and their CMOR,CCS,rupture displacement and residual CCS( two water quenching cycles,1 100 ℃) are increased by 66%,47%,13% and 26%,respectively;( 3) two-dimensional array structure of flake β-SiAlON can be in-situ formed in Al2 O3-C refractories,which improves the material strength by 60% and decreases the residual strength after thermal shock by only 4. 5 MPa. It is believed that the in-situ formation of one-or two-dimensional bonding phases at high temperatures can improvethe comprehensive thermal physical properties of carboncontaining refractories,and will be the developing trend of the strengthening and toughening of low carbon-containing refractories.
基金National Key R&D Program of China(Grant No.2018YFC1901504)National Natural Science Foundation of China(Grant No.51872268).
文摘Due to thermal stability and excellent resistance to slag erosion,the used refractories can be recycled as the main raw material for some refractories.In this article the latest developments about used refractories in metallurgical industry has been reviewed,focusing on the results reported in the past decade.The research and reutilization methods of used refractories were discussed.For the research of used refractories,the results of two aspects,the performance and surface corrosion characteristics,are summarized.Then,the advances in research on recycling technology of several main kinds of used refractories,such as MgO-C,Al2O3-SiC-C,Al2O3-MgO-C,magnesium-chrome,and corundum-spinel refractories were summarized and discussed in detail.Some results of the author’s group were reported等线accompanied by these comments.The microstructure and chemical composition were studied by scanning electron microscopy and energy dispersion spectra,and the properties of the refractories were analyzed.Afterwards,the scope of application of materials was determined according to the classification and analysis of refractories.Finally,the large-scale application of used refractories and an outlook is given to future developments of the entire recycling industry.
文摘The paper analyzed the recycle condition and developing trend of used refractories China and other countries, irwluding research achievements of recycles of used refractories such as MgO-C bricks, Al2O3-MgO-C brics, Al2O3-SiC-C castable and MgO-Cr2O3 bricks. Recycled refractories exhibit the same or even better properties as compared with the original. In addition, prospects for recycle of used refractories are also discusseded.
基金the project supported by the Natural Science Foundation of Hubei Province(Grant No.2023BAB106)the National Natural Science Foundation of China(Grant No.U20A20239).
文摘The rapid development of iron and steel metallurgy technology has promoted the continuous innovation and iteration of carbon-containing refractories for clean steel smelting.To meet the high-quality requirements for clean steel production and full exploit the performance advantages of carbon-containing refractories in dynamic smelting environment,it is necessary to explore the role of graphite and modified graphite in carbon-containing refractories.Based on this,graphite surface modification methods,including surfactants,surface oxidation,and surface coating,and their applications in carbon-containing refractories are reviewed.The advantages and disadvantages of each method are analyzed for practical use.Furthermore,combined with the existing problems,the application prospect of improved graphite in carbon-containing refractories is discussed.
文摘It has been reported that a 92-year-old female had got a bruise superficial wound on her right leg one and a half years ago,developing into refractory skin ulcer due to improper management before.A prepared cream,mixed royal jelly with berberine for dressing change,was made on the scene through the crush of berberine tablets,working with fresh royal jelly.Topical dressing change with the cream was done every 3 days,and two months later,such the ulcer became clean and was covered fully with fresh granulation tissue.This kind of cream consists of the ingredients of TCM purely,free of antibiotic,and being quite effective clinically,also helpful for proper use of antibiotic.