Chemical Analysis Method for Carbon Bearing Refractory Products——Determination of the Total Carbon by Combustion Gravimetric Method

GB/T 13245-91 1 Theme and Scope This standard specifies the method abstract, reagents, apparatus, specimen, analyzing procedure, result calculation and permissible tolerance used for determination of the total carbon with combustion gravimetric method.

Study on the Pyrolytic Carbon Generated by the Electric Heating CVD Method

A new method of fabricating C/C composite materials, namely electric heating CVD method, was used, which electrified the carbon fiber directly by using the conductivity of itself. Acetylene was used as the carbon source with nitrogen as dilution gas, and the pyrolytic carbon started to deposit on the carbon fiber surface when the deposition temperature was reached. The morphology of pyrolytic carbon was characterized by SEM, and the surface properties of carbon fibers before and after CVD were characterized by Raman spectroscopy. The experimental results show that the electric heating method is a novel method to fabricate C/C composite materials, which can form a dense C/C composite material in a short time. The order degree and the average crystallite size of the carbon fiber surface were decreased after the experiment.

Desiliconisation of alkaline leaching solution of roasted stone coal with carbonation method

The effects of reaction time,reaction temperature,stirring speed and flowrate of CO2 gas on desilication rate and loss rate of vanadium were studied.The results indicated that desilication rate increases with the increase of flowrate of CO2 gas and reaction time.Reaction temperature and stirring speed have little effect on desilication rate,while influence the loss rate of vanadium significantly.Under the condition of reaction time of 2 h,reaction temperature of 95℃,stirring speed of 180 r/min,flowrate of CO2 gas of 60 mL/min and aging time of 2 h,desilication rate is more than 96%and the loss rate of vanadium is about 4.24%.The residue of desilication process can be processed for silicon materials,such as high-grade hydrated silica,which commonly known as white carbon black.In addition,with this carbonation method,leaching regents NaOH can be recycled by simple treatments.

Chemical Analysis Method for Carbon Bearing Refractory Products——Determination of Magnesium Oxide Content by CyDTA Volumetric Method

This standard specifies the method summary, reagents, apparatus, sampling, procedure, test results calculation and permissible tolerance of the determination of magnesium oxide by CyDTA volumetric method.

A Method of Using a Carbon Fiber Spiral-Contact Electrode to Achieve Atmospheric Pressure Glow Discharge in Air

During discharge, appropriately changing the development paths of electron avalanches and increasing the number of initial electrons can effectively inhibit the formation of filamentary discharge. Based on the aforementioned phenomenon, we propose a method of using microdischarge electrodes to produce a macroscopic discharge phenomenon. In the form of an asymmetric structure composed of a carbon fiber electrode, an electrode structure of carbon fiber spiral-contact type is designed to achieve an atmospheric pressure glow discharge in air, which is characterized by low discharge voltage, low energy consumption, good diffusion and less ozone generation.

Facile Oxygen-promoted Synthesis of Cu,N Co-doped Carbon Composites for Oxygen Reduction

A new strategy to fabricate oxygen-promoted Cu,N co-doped carbon(OP-CuN@C)composites is reported.The strategy consists of only two simple steps:chemical polymerization and high temperature carbonization.Electrochemical measurements were conducted to investigate the catalytic activity and mechanism of ORR on the resulting samples.All the electrochemical results indicate that OP-CuN@C exhibits the best ORR catalytic activity.The ORR onset potential of OP-CuN@C is slightly lower than that of commercial Pt/C catalyst.The good performance is attributed to the large specific surface area,high content of heteroatoms(pyridinic,graphitic nitrogen,and oxygen atom)and synergistic effect between divalent copper and nitrogen dopant.

Preparation of K_2CO_3 Using Potassic Syenite from East Qinling Mountains

1 Introduction Songxian at East Qinling mountains in China possesses more than 100 million tons potassic syenite with the average K2O content of 13%and the main mineral phase of K-feldspar which is a kind of potential potassium

Identifying Carbon stars from the LAMOST pilot survey with the efficient manifold ranking algorithm

Carbon stars are excellent kinematic tracers of galaxies and can serve as a viable standard candle, so it is worthwhile to automatically search for them in a large amount of spectra. In this paper, we apply the efficient manifold ranking algorithm to search for carbon stars from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope （LAMOST） pilot survey, whose performance and robustness are verified comprehensively with four test experiments. Using this algorithm, we find a total of 183 carbon stars, and 158 of them are new findings. According to different spectral features, our carbon stars are classified as 58 C-H stars, 11 C-H star candidates, 56 C-R stars, ten C-R star candidates, 30 C-N stars, three C-N star candidates, and four C-J stars. There are also ten objects which have no spectral type because of low spec- tral quality, and a composite spectrum consisting of a white dwarf and a carbon star. Applying the support vector machine algorithm, we obtain the linear optimum clas- sification plane in the J - H versus/-/- Ks color diagram which can be used to distinguish C-H from C-N stars with their J - H and H - Ks colors. In addition, we identify 18 dwarf carbon stars with their relatively high proper motions, and find three carbon stars with FUV detections likely have optical invisible companions by cross matching with data from the Galaxy Evolution Explorer. In the end, we detect four variable carbon stars with the Northern Sky Variability Survey, the Catalina Sky Survey and the LINEAR variability databases. According to their periods and ampli- tudes derived by fitting light curves with a sinusoidal function, three of them are likely semiregular variable stars and one is likely a Mira variable star.

Inter-provincial carbon emission intensity factor analysis and carbon intensity projection calculation in China

The extended “STIRPAT” model and the GM(1,1) model are used to predict the factors influencing inter-provincial carbon emission intensity and carbon intensity in China respectively. In this paper, based on the collation of inter-provincial carbon emission data, the extended “STIRPAT” model is formulated for carbon dioxide emissions and carbon intensity emissions, and the Hausman test is used to determine the influence form of the models. The main influencing factors of carbon intensity were identified: economic development level, energy intensity, and energy consumption structure. The paper constructs GM(1,1) model for carbon emission intensity from 2010-2019 using the gray prediction method,and calculates the carbon emission intensity of China’s inter-provincial 2022 by residual test, correlation test, variance, and small error probability test, and then predicts the carbon demand of each province and city in 2022 according to the expected average annual growth rate, and finally concludes that using carbon emission intensity as the carbon emission reduction target of each region, and it cannot fundamentally solve the problem of carbon pollution in China. Compared to the regional carbon emission reduction target, there is a greater degree of regional imbalance in carbon intensity between provinces in China, and the target of reducing carbon emission intensity somehow avoids the fact that the carbon emission reduction intensity target can be achieved without reducing the absolute amount of carbon emissions that continue to increase. The focus of achieving the “double carbon” target lies in the reduction of total carbon emissions, and the target of reducing carbon intensity will eventually be transformed into a binding target of total carbon emissions in the process of implementation, so attention should be shifted from recessiontype carbon reduction and efficiency-type carbon reduction to innovative carbon reduction. It is necessary to increase investment in renewable energy, and gradually expand the scope of application of photovoltaic, and wind power to ensure the reduction of total carbon emissions.

Synthesis of mesoporous silica microspheres by a spray-assisted carbonation microreaction method

A novel spray-assisted carbonation microreaction method for the synthesis of mesoporous silica microspheres is reported.The synthetic process comprises the preparation of a silica sol via a carbonation reaction,rapid gelation at high temperature,and subsequent rapid solvent evaporation by spray drying.The carbonation microreaction was conducted in a membrane dispersion microreactor,in the presence of sodium silicate and carbon dioxide reactants.The as-synthesized silica microspheres exhibit a uniform mesostructure,excellent dispersity,and a narrow particle size distribution,with average diameters of 1-2 μm,Brunauer-Emmett-Teller surface areas of 300-1149m2/g,and total pore volumes of 0.21-1.82 cm3/g.Relatively low concentrations of the silicate species and well-controlled silica condensation rates are responsible for the formation of the observed spherical morphology.The synthetic process is of significant practical importance as a result of using low-cost raw materials,and because of the excellent controllability and process stability displayed.Furthermore,this rapid and flexible method may be extended to the synthesis of various silica materials and their composites.

Overwhelming electrochemical oxygen reduction reaction of zinc-nitrogen-carbon from biomass resource chitosan via a facile carbon bath method

Developing high efficiency and low cost electrocatalysts is critical for the enhancement of oxygen reduction reaction(ORR),which is the fundamental for the development and commercialization of renewable energy conversion technology.Herein,zinc-nitrogen-carbon(Zn-N-C)was prepared by using biomass resource chitosan via a facile carbon bath method.The obtained Zn-N-C delivered a high specific surface area(794.7 cm^2/g)together with pore volume(0.49 cm^3/g).During the electrochemical evaluation of oxygen reduction reaction(ORR),Zn-N-C displayed high activity for ORR with an onset pote ntial E0=0.96 VRHE and a half wave potential E1/2=0.86 VRHE,which were more positive than those of the comme rcial 20 wt%Pt/C benchmark catalyst(E0=0.96 VRHE and E1/2=0.81 VRHE).In addition,the ZnN-C catalyst also had a better stability and methanol tolerance than those of the Pt/C catalyst.

Synthesis of magnetic carrier sub-microparticles with high stability through carbon reduction and solation coating methods

This paper presents a novel approach in synthesizing SiO_2-Fe_3O_4magnetic carrier with high stability.The Fe_3O_4 magnetic powders were synthesized via onestep method named carbon reduction method. The advantages of the methods are of simple process, none lead-in pollution agent, low cost and adaptation to large-lot production. The stability of the magnetic powders is improved through modifying the Fe_3O_4 with SiO_2 in solation method.The results of the characterizations show that the superparamagnetic SiO_2-Fe_3O_4sub-microparticles（~600 nm）with saturation intensity of 36.4 m A·m^2·g^（-1）are obtained successfully. Moreover, the quantitating, repeatability and high stability of the carbon reduction method are demonstrated as well.

Experimental study using the dilution incubation method to assess water biostability

Water biostability is of particular concern to water supply as a major limiting factor for heterotrophic bacterial growth in water distribution systems. This study focused on bacterial growth dynamics in the series dilution of water samples with TOC（total organic carbon） values determined beforehand. The results showed that the specific growth rate of Pseudomonas fluorescens P17 varied dramatically and irregularly with TOC value when TOC concentrations were low enough during the initial periods of incubation under given conditions. According to this relationship between bacterial growth rate and TOC, a dilution incubation method was designed for the study of water biostability. With the method under a given condition, a turning-point TOC value was found at a relatively fixed point in the curve between bacterial growth rate and TOC of water sample, and the variation of growth rate had different characteristics below the turning-point TOC value relative to that over this value. A turning-point TOC value similarly existed in all experiments not only with tap water, but also with acetate and mixed solutions. And in the dilution incubation method study, the affections were analyzed by condition factors such as inoculum amount,incubation time and nature of the organic carbon source. In very low organic carbon water environments, the variation characteristics of bacterial growth rate will be useful to further understand the meaning of water biostability.

Carbide precipitation and element distribution in high Co-Ni secondary hardening steel

As the increasing need of the steels with both high strength and hydrogen embrittlement resistance ability, carbide precipitation and element distribution in high Co-Ni secondary hardening steel were concerned. Carbide precipitation and element distribution in M54 were observed using carbon replicas method. Both simulation and observation results showed that MC and M2C formed in the steel. MC was round particle, which would act as grain refiners. And MzC was needle-like phase, which would be remarkable strengthening phases. Nb and V were main metallic elements in MC phase. Mo and Cr were main metallic elements in MzC phase. W, Co, and Ni were probably mainly dissolved in the matrix. As the carbide precipitation in AerMetl00 was M2C, which had similar size and shape with M2C in M54, the tensile strength and yield strength of AerMetl00 and M54 were similar. Compared with traditional high Co-Ni secondary hardening steel, M54 had higher hydrogen embrittlement resistance ability, probably because of element W in the matrix.

Soil organic carbon dynamics in Xilingol grassland of northern China induced by the Beijing-Tianjin Sand Source Control Program

To mitigate impacts of sandstorms on northern China, the Chinese government launched the Beijing- Tianjin Sand Source Control Program （BTSSCP） in 2000. The associated practices （i.e., cultivation, enclosure, and aerial seeding） were expected to greatly enhance grassland carbon sequestration. However, the BTSSCP-induced soil organic carbon （SOC） dynamics remain elusive at a regional level. Using the Xilingol League in Inner Mongolia for a case study, we examined the impacts from 2000 to 2006 of the BTSSCP on SOC stocks using the IPCC carbon budget inventory method. Results indicated that over all practices SOC storage increased by 1.7%, but there were large differences between practices. SOC increased most rapidly at the rate of 0.3 Mg C.ha-1 ＂yr-1 under cultivation, but decreased signifi- cantly under aerial seeding with moderate or heavy grazing （0.3 vs.0.6 Mg C-ha-I .yr-1）. SOC increases varied slightly for grassland types, ranging from 0.10 Mg C-ha-1 .yr-a for temperate desert steppe to 0.16 Mg C.ha-l.yr-1 for temperate meadow steppe and lowland meadow. The overall economic benefits of the SOC sink were estimated to be 4.0 million CNY. Aerial seeding with no grazing was found to be the most cost-effective practice. Finally, we indicated that at least 55.5 years （shortest for cultivation） were needed for the grasslands to reach their potential carbon stocks. Our findings highlight the importance and effectiveness of BTSSCP in promoting terrestrial carbon sequestration which may help mitigate climate change, and further stress the need for more attention to the effective- ness of specific practices.

Boron and nitrogen dual-doped carbon as a novel cathode for high performance hybrid ion capacitors

Hybrid ion capacitors have been considered as a very attractive energy source with high energy density and power density since it combines both merits of lithium ion batteries and supercapacitors. However,their commercial application has been limited by the mismatch of charge-storage capacity and electrode kinetics between the capacitor-type cathode and battery-type anode. Herein, B and N dual-doped 3D superstructure carbon cathode is prepared through a facile template method. It delivers a high specific capacity, excellent rate capability and good cycling stability due to the B, N dual-doping, which has a profound effect in control the porosity, functional groups, and electronic conductivity for the carbon cathode. The hybrid ion capacitors using B, N dual-doping carbon cathode and prelithiated graphite anode show a high energy density of 115.5 Wh/kg at 250 W/kg and remain about 53.6 Wh/kg even at a high power density of 10 kW/kg. Additionally, the novel hybrid device achieves 76.3% capacity retention after 2000 cycles tested at 1250 W/kg power density. Significantly, the simultaneous manipulation of heteroatoms in carbon materials provides new opportunities to boost the energy and power density for hybrid ion capacitors.

Preparation of highly luminescent nitrogen and sulfur co-doped carbon nanoparticles for iron(Ⅲ)ions detection and cell imaging

Highly photoluminescent nitrogen and sulfur co-doped carbon nanoparticles（CNPs） ca. 56 nm have been prepared through a green one-step hydrothermal synthesis route by using millet powder as carbon sources, in which the nitrogen and sulfur co-doping improves the photoluminescent efficiency of the CNPs. The as-prepared CNPs display excellent fluorescent properties and low biotoxicity with a relatively high quantum yield of 30.4%, which have been applied for bioimaging and highly sensitive and selective detection of iron（III） ions.

Green synthesis of ceria powders with special physical properties by carbon dioxide carbonization

In order to improve the application values of Ce element, in this paper, rare earth chloride solution was used as raw material, the pH value was controlled by inorganic alkali, the ceria powders with special physical properties were prepared by carbon dioxide carbonization method. According to characterization of SEM, XRD, and TG-DSC, Ce（OH）3 prepared at pH = 7.5 exhibits smaller particle size than that prepared at other conditions. CeO2 precursor obtained by direct carbonization of Ce（OH）3 shows smaller particle size and narrow size distribution, CeO2 precursor forms at first by carbonization of Ce（OH）3 with the continuous addition of CO2 gas,and the chemical component is indicated to be Ce2 O（CO3）2·6 H2 O.Cubic phase CeO2 powders are obtained by calcined at 750 ℃ for 4 h. The mean particle size D（50） is0.941 μm, and particle size distribution is smaller than 1. The microscopic appearance is homogeneous,with a spherical-like shape and a grain size of 200-500 nm. The light quality characteristics of sedimentation volume and accumulation density are obviously better than those of carbonate precipitation products. The carbonization method can be used not only to obtain ultra-fine rare earth oxides with fine particle size, narrow distribution and high dispersion properties, but also to achieve the reuse of carbon dioxide greenhouse gas.