A case-based reasoning method of recognizing liquefaction pits induced by 2021 M_(W) 7.3 Madoi earthquake

Earthquake-triggered liquefaction deformation could lead to severe infrastructure damage and associated casualties and property damage.At present,there are few studies on the rapid extraction of liquefaction pits based on high-resolution satellite images.Therefore,we provide a framework for extracting liquefaction pits based on a case-based reasoning method.Furthermore,five covariates selection methods were used to filter the 11 covariates that were generated from high-resolution satellite images and digital elevation models(DEM).The proposed method was trained with 450 typical samples which were collected based on visual interpretation,then used the trained case-based reasoning method to identify the liquefaction pits in the whole study area.The performance of the proposed methods was evaluated from three aspects,the prediction accuracies of liquefaction pits based on the validation samples by kappa index,the comparison between the pre-and post-earthquake images,the rationality of spatial distribution of liquefaction pits.The final result shows the importance of covariates ranked by different methods could be different.However,the most important of covariates is consistent.When selecting five most important covariates,the value of kappa index could be about 96%.There also exist clear differences between the pre-and post-earthquake areas that were identified as liquefaction pits.The predicted spatial distribution of liquefaction is also consistent with the formation principle of liquefaction.

IMPROVED AERODYNAMIC APPROXIMATION MODEL WITH CASE-BASED REASONING TECHNIQUE FOR MDO OF AIRCRAFT

To increase the efficiency of the multidisciplinary optimization of aircraft, an aerodynamic approximation model is improved. Based on the study of aerodynamic approximation model constructed by the scaling correction model, case-based reasoning technique is introduced to improve the approximation model for optimization. The aircraft case model is constructed by utilizing the plane parameters related to aerodynamic characteristics as attributes of cases, and the formula of case retrieving is improved. Finally, the aerodynamic approximation model for optimization is improved by reusing the correction factors of the most similar aircraft to the current one. The multidisciplinary optimization of a civil aircraft concept is carried out with the improved aerodynamic approximation model. The results demonstrate that the precision and the efficiency of the optimization can be improved by utilizing the improved aerodynamic approximation model with ease-based reasoning technique.

Design System of the Two-step Gear Reducer on Case-based Reasoning

The design of the two-step gear reducer is a tedious and time-consuming process. For the purpose of improving the efficiency and intelligence of design process, case-based reasoning（CBR） technology was applied to the design of the two-step gear reducer. Firstly, the current design method for the two-step gear reducer was analyzed and the principle of CBR was described. Secondly, according to the characteristics of the reducer, three key technologies of CBR were studied and the corresponding methods were provided, which are as follows： （a） an object-oriented knowledge representation method, （b） a retrieval method combining the nearest neighbor with the induction indexing, and （c） a case adaptation algorithm combining the revision based on rule with artificial revision. Also, for the purpose of improving the credibility of case retrieval, a new method for determining the weights of characteristics and a similarity formula were presented, which is a combinatorial weighting method with the analytic hierarchy process（AHP） and roughness set theory. Lastly, according to the above analytic results, a design system of the two-step gear reducer on CBR was developed by VC＋＋, UG and Access 2003. A new method for the design of the two-step gear reducer is provided in this study. If the foregoing developed system is applied to design the two-step gear reducer, design efficiency is improved, which enables the designer to release from the tedious design process of the gear reducer so as to put more efforts on innovative design. The study result fully reflects the feasibility and validity of CBR technology in the process of the design of the mechanical parts.

Endpoint temperature prediction of molten steel in RH using improved case-based reasoning

An improved case-based reasoning （CBR） method was proposed to predict the endpoint temperature of molten steel in Ruhrstahl Heraeus （RH） process. Firstly, production data were analyzed by multiple linear regressions and a pairwise comparison matrix in analytic hierarchy process （AHP） was determined by this linear regression＇s coefficient. The weights of various influencing factors were obtained by AHP. Secondly, the dividable principles of case base including ＂0-1＂ and ＂breakpoint＂ were proposed, and the case base was divided into several homogeneous parts. Finally, the improved CBR was compared with ordinary CBR, which is based on the even weight and the single base. The results show that the improved CBR has a higher hit rate for predicting the endpoint temperature of molten steel in RH.

Case-Based Reasoning(CBR) Model for Ultra-Fast Cooling in Plate Mill

New generation thermo-mechanical control process（TMCP） based on ultra-fast cooling is being widely adopted in plate mill to product high-performance steel material at low cost. Ultra-fast cooling system is complex because of optimizing the temperature control error generated by heat transfer mathematical model and process parameters. In order to simplify the system and improve the temperature control precision in ultra-fast cooling process, several existing models of case-based reasoning（CBR） model are reviewed. Combining with ultra-fast cooling process, a developed R5 CBR model is proposed, which mainly improves the case representation, similarity relation and retrieval module. Certainty factor is defined in semantics memory unit of plate case which provides not only internal data reliability but also product performance reliability. Similarity relation is improved by defined power index similarity membership function. Retrieval process is simplified and retrieval efficiency is improved apparently by windmill retrieval algorithm. The proposed CBR model is used for predicting the case of cooling strategy and its capability is superior to traditional process model. In order to perform comprehensive investigations on ultra-fast cooling process, different steel plates are considered for the experiment. The validation experiment and industrial production of proposed CBR model are carried out, which demonstrated that finish cooling temperature（FCT） error is controlled within±25℃ and quality rate of product is more than 97%. The proposed CBR model can simplify ultra-fast cooling system and give quality performance for steel product.

Case-Based Reasoning for Slope Stability Evaluation and Its Application

Slope is a non-linear and uncertain kinetic system affected by many factors. In view of the incompleteness and uncertainty of the information of slope stability evaluation, a new method of slop stability evaluation by using case-based reasoning is presented. Considering the sensitivity of attribute weights to the environment, the algorithm of attribute weights is set up on the basis of the concept of changeable weights. Calculating the similarity between target case of the slope and base case, the stability of target case is evaluated. It is shown from examples that the method is simple, visual, practical, and convenient for use.

Recognition of suspicious behavior using case-based reasoning

A novel method case-based reasoning was proposed for suspicious behavior recognition. The method is composed of three departs: human behavior decomposition, human behavior case representation and case-based reasoning. The new approach was proposed to decompose behavior into sub-behaviors that are easier to recognize using a saliency-based visual attention model. New representation of behavior was introduced, in which the sub-behavior and the associated time characteristic of sub-behavior were used to represent behavior case. In the process of case-based reasoning, apart from considering the similarity of basic sub-behaviors,order factor was proposed to measure the similarity of a time order among the sub-behaviors and span factor was used to measure the similarity of duration time of each sub-behavior, which makes the similarity calculations more rational and comprehensive.Experimental results show the effectiveness of the proposed method in comparison with other related works and can run in real-time for the recognition of suspicious behaviors.

Development of High-speed Machining Database with Case-based Reasoning

Applying high-speed machining technology in shop floor has many benefits, such as manufacturing more accurate parts with better surface finishes. The selection of the appropriate machining parameters plays a very important role in the implementation of high-speed machining technology. The case-based reasoning is used in the developing of high-speed machining database to overcome the shortage of available high-speed cutting parameters in machining data handbooks and shop floors. The high-speed machining database developed in this paper includes two main components: the machining database and the case-base. The machining database stores the cutting parameters, cutting tool data, work pieces and their materials data, and other relative data, while the case-base stores mainly the successfully solved cases that are problems of work pieces and their machining. The case description and case retrieval methods are described to establish the case-based reasoning high-speed machining database. With the case retrieval method, some succeeded cases similar to the new machining problem can be retrieved from the case-base. The solution of the most matched case is evaluated and modified, and then it is regarded as the proposed solution to the new machining problem. After verification, the problem and its solution are packed up into a new case, and are stored in the case-base for future applications.

Research of Genetic Training Algorithm for Identifying Mechanical Failure Modes within the Framework of Case-Based Reasoning

The combination of case-based reasoning （CBR） and genetic algorithm （GA） is considered in the problem of failure mode identification in aeronautical component failure analysis. Several imple- mentation issues such as matching attributes selection, similarity measure calculation, weights learning and training evaluation policies are carefully studied. The testing applications illustrate that an accuracy of 74.67 % can be achieved with 75 balanced-distributed failure cases covering 3 failure modes, and that the resulting learning weight vector can be well applied to the other 2 failure modes, achieving 73.3 % of recognition accuracy. It is also proved that its popularizing capability is good to the recognition of even more mixed failure modes.

A New Method to Predict Erythrocyte Sedimentation Rate with Natural Geographical Factors and Location by Case-based Reasoning: A Case Study of China

Reference values of erythrocyte sedimentation rate(ESR)are the key to interpret ESR blood test in clinic.The common local reference ESR values are more accuracy in blood test that are established with natural geographical factors by using the multiple linear regression(MLR)model and the artificial neural network(ANN).These knowledge-based methods have limitations since the knowledge domains of ESR and natural geographical factors are limited.This paper presents a new cases-depended model to establish reference ESR values with natural geographical factors and location using case-based reasoning(CBR)since knowledge domain of ESR and geographical factors is weak.Overall 224 local normal ESR values of China that calculated from 13623 samples were obtained,and the corresponding natural geographical factors and location that include altitude,sunshine hours,relative humidity,temperature,precipitation,annual temperature range and annual average wind speed were obtained from the National Geomatics Center of China.CBR was used to predict the unseen local reference ESR values with cases.The average absolute deviation(AAD),mean square error(MSE),prediction accuracy(PA),and Pearson correlation coefficient(r)between the observed and estimated data of proposed model is 33.07%,9.02,66.93% and 0.78,which are better than those of ANN and MLR model.The results show that the proposed model provides higher prediction accuracy than those of the artificial neural network and multiple linear regression models.The predicted values are very close to the observed values.Model results show significant agreement of cases data.Consequently,the model is used to predict the unseen local reference ESR with natural geographical factors and location.In spatial,the highest ESR reference areas are distributed in the southern-western district of China that includes Sichuan,Chongqing,Guangxi and Guizhou provinces,and the reference ESR values are greater than 23 mm/60 min.The higher ESR reference values are distributed in the middle part and northern-eastern of China which include Hubei,Henan,Shaanxi,Shanxi,Jilin and Heilongjiang provinces,and the reference ESR values are greater than 18 mm/60min.The lowest ESR reference values are distributed in the northern-western of China that includes Tibet and Xinjiang,and the reference ESR values are lower than 5 mm/60min.

Machinery fault diagnosis expert system based on case-based reasoning

A mechinery fault diagnosis expert system based on case-based reasoning (CBR) technology was established. The process of the CBR fault diagnosis is analyzed from three main aspects: expression and memory, retrieving and matching, and modification and maintenance of a case. The results indicate that the CBR method is flexible and simple to implement, and it has strong self-studying ability. Using a large enough number of case reasoning sets, it can accumulate the experience of problem solving, avoid the difficulty of knowledge acquisition, shorten the course of solving problems, improve efficiency of reasoning, and save the time of developing.

Case-Based Reasoning Topological Complexity Calculation of Design for Components

Directly calculating the topolo gi cal and geometric complexity from the STEP (standard for the exchange of product model data, ISO 10303) file is a huge task. So, a case-based reasoning approac h is presented, which is based on the similarity between the new component and t he old one, to calculate the topological and geometric complexity of new compone nts. In order to index, retrieve in historical component database, a new way of component representation is brought forth. And then an algorithm is given to ext ract topological graph from its STEP files. A mathematical model, which describe s how to compare the similarity, is discussed. Finally, an example is given to s how the result.

Prediction model for permeability index by integrating case-based reasoning with adaptive particle swarm optimization

To effectively predict the permeability index of smelting process in the imperial smelting furnace, an intelligent prediction model is proposed. It integrates the case-based reasoning （CBR） with adaptive par- ticle swarm optimization （PSO）. The nmnber of nearest neighbors and the weighted features vector are optimized online using the adaptive PSO to improve the prediction accuracy of CBR. The adaptive inertia weight and mutation operation are used to overcome the premature convergence of the PSO. The proposed method is validated a compared with the basic weighted CBR. The results show that the proposed model has higher prediction accuracy and better performance than the basic CBR model.

Application of Case-Based Reasoning to Intelligent Support System for Coordinating Land Conflicts

To establish the institutional mechanism for land conflict coordination in China, a case-based reasomng system is developed as an intelligent support and effective manner to resolve such issues. The establishment of the case library is discussed, previous land conflict cases are archived in a structural representation format for retrieval, and the similarity algorithm is adopted to compare the case features. Group tests show a good classification performance, which reveals that the system is feasible.

Developing a geographic Case-Based Reasoning approach

Case-Based Reasoning （CBR） is an AI approach and been applied to many areas. However, one area - geography - has not been investigated systematically and thus has been identified as the focus for this study. This paper intends to further extend current CBR to a geographic CBR （Geo-CBR）. First, the concept of Geo-CBR is proposed. Second, a representation model for geographic cases has been established based on the Tesseral model and on a further extension in spatio-temporal dimensions for geographic cases. Third, a reasoning model for Geo-CBR is developed by considering the spatio-temporat characteristics and the uncertain and limited information of geographic cases. Finally, the Geo-CBR model is applied to forecasting the production of ocean fisheries to demonstrate the applicability of the developed Geo-CBR in solving problems in the real world. According to the experimental results, Geo-CBR is an effective and easy-to-implement approach for predicting geographic cases quantitatively.

＂Intelligent＂ Knowledge Reuse for Complex Logistics Projects： An Application of Ontology-Driven and Case-Based Reasoning

The application potential of ontology-driven and CBR （case-based reasoning） is demonstrated for the business knowledge management particularly with respect to the reuse of knowledge of experience concerning logistics projects. The relevance of poorly structured, qualitative and especially in natural language represented knowledge is outlined for purposes of knowledge management, particularly with respect to the management of project-related knowledge. It is elucidated how this kind of knowledge can be preprocessed and reused with the support of a computer. At first, the technique of CBR is outlined in its basic fundamentals. Thereupon, it will be shown how the technique of ontologies can be used for the computer-supported processing of knowledge represented in natural language and integrated in computer-assisted CBR systems. A simple application example illustrates how ontology-driven and CBR can be used in practice within the reuse of project-related knowledge. Finally, it will be addressed which further need for research exists in principle.

Customer Asset Risk Discernment of E-commerce Enterprises Based on Case-based Reasoning

In the Internet economy of the twentieth century, the competition for customers between enterprises is stiffer so that they strive for customers by all means. As a kind of new thing in the Internet economy, E-commerce can attract customers and expand sales efficiently; therefore, E-commerce becomes a powerful means by which enterprises can improve customer asset rapidly. However, compared with customer asset of traditional commerce enterprises, E-commerce enterprises customer asset is more liable to be affected by the surroundings, which will result in risk. On the other hand, though enterprises pay close attention to the study of customer asset risk of E-commerce enterprises currently, the academic circles have made little research in this respect, which is not helpful for enterprises to improve customer asset by applying for E-commerce, nor can meet the actual requirement for the development of academic circles. Therefore, the customer asset risk discernment of E-commerce enterprises has been studied in this paper, and case-based reasoning（CBR） has been applied to the discernment of the customer asset risk of E-commerce enterprise, which provides quantitative basis for customer asset risk management of E-commerce enterprises and conduces to the prevention of customer asset risk and the efficiency improvement of E-commerce.

Mineral Prospectivity Mapping Method Integrating Multi-Sources Geology Spatial Data Sets and Case-Based Reasoning

Extracting and synthesizing information from existing and massive amounts of geology spatial data sets is of great scientific significance and has considerable value in its applications. To make mineral exploration less expensive, more efficient, and more accurate, it is important to move beyond traditional concepts and establish a rapid, efficient, and intelligent method of predicting the existence and location of minerals. This paper describes a case-based reasoning (CBR) method for mineral prospectivity mapping that takes spatial features of geology data into account and offers an intelligent approach. This method include a metallogenic case representation that combines spatial and attribute features, metallogenic case-based storage organization, and a metallogenic case similarity retrieval model. The experiments were performed in the eastern Kunlun Mountains, China using CBR and weights-of-evidence (WOE), respectively. The results show that the prediction accuracy of the CBR is higher than that of the WOE.

Case-Based Reasoning in Conceptual Design

The framework for supporting conceptual design using case-based reasoning is studied. Adesign knowledge representation scheme is presented. It is capable of representing both generalized and specific design knowledge. A two-phase case retrieval strategy, called index elaboration, is described which supports both requirement-function transformation and function-feature transformation at conceptual design stage. We propose a prototype system and discuss in detail the realization of supporting conceptual design by CBR.

Temperature Prediction of Aluminum Alloy Work-Pieces in Aging Furnaces Based on Improved Case-Based Reasoning

The temperature of aluminum alloy work-pieces in the aging furnace directly affects the quality of aluminum alloy products. Since the temperature of aluminum alloy work-pieces cannot be measured directly, a temperature prediction model based on improved case-based reasoning (CBR) method is established to realize the online measurement of the work-pieces temperature. More specifically, the model is constructed by an advanced case-based reasoning method in which a state transition algorithm (STA) is firstly used to optimize the weights of feature attributes. In other words, STA is utilized to find the suitable attribute weights of the CBR model that can improve the accuracy of the case retrieval process. Finally, the CBR model based on STA (STCBR) was applied to predict the temperature of aluminum alloy work-pieces in the aging furnace. The results of the experiments indicated that the developed model can realize high-accuracy prediction of work-pieces temperature and it has good application prospects in the industrial field.