New correlations for evaluating the equivalent bare charge mass for a cased charge

Munitions contain casings that consume explosive energy.The blast load(e.g.,peak overpressure and maximum impulse)intensity generated by ammunition explosion will be lower than that generated by a bare charge with equal mass.To evaluate the blast load of a cased charge under different conditions,the equivalent bare mass needs to be calculated.However,the accuracy of existing correlations strongly depends on the empirical determination of relevant controlling parameters and lacks theoretical clarification.In this paper,new correlations are proposed based on a more rigorous theoretical derivation,considering both the mechanical behaviors of the casing’s material and the change of the polytropic exponent during the expansion process of the explosion products.The controlling parameters are attributed to the rupture radius ratio and the polytropic exponent of detonation products expansion to casing rupture state.The reasonability is validated by both comprehensive numerical simulations with dynamic mechanical constitutive model and theoretical derivations.The results calculated by the new correlation show better agreement with the experimental results than those calculated by previous correlations,and the results difference is explained in more consistency with the thermos-physical properties of the charge and mechanical behaviors of casing material.Furthermore,the correlation of the cased-to-bare impulse ratio is also theoretically improved,providing a more accurate theoretical basis for both the equivalent bare mass and impulse evaluation for a cased charge.

Numerical simulation and optimized design of cased telescoped ammunition interior ballistic

In order to achieve the optimized design of a cased telescoped ammunition(CTA) interior ballistic design,a genetic algorithm was introduced into the optimal design of CTA interior ballistics with coupling the CTA interior ballistic model. Aiming at the interior ballistic characteristics of a CTA gun, the goal of CTA interior ballistic design is to obtain a projectile velocity as large as possible. The optimal design of CTA interior ballistic is carried out using a genetic algorithm by setting peak pressure, changing the chamber volume and gun powder charge density. A numerical simulation of interior ballistics based on a 35 mm CTA firing experimental scheme was conducted and then the genetic algorithm was used for numerical optimization. The projectile muzzle velocity of the optimized scheme is increased from 1168 m/s for the initial experimental scheme to 1182 m/s. Then four optimization schemes were obtained with several independent optimization processes. The schemes were compared with each other and the difference between these schemes is small. The peak pressure and muzzle velocity of these schemes are almost the same. The result shows that the genetic algorithm is effective in the optimal design of the CTA interior ballistics. This work will be lay the foundation for further CTA interior ballistic design.

Numerical simulation of an acoustic field generated by a phased arc array in a fluid-filled cased borehole

Transducers that are widely applied in cement bond evaluation tools, such as cement bond logs and variable density logs, cannot radiate acoustic energy directionally because of the characteristics of monopole sources. A phased arc array transmitter, which is a novel transducer that differs from monopole and dipole transducers, is presented in this study. To simulate the acoustic field generated by a phased arc array in a fluid-filled cased borehole with different channelings, a 3D finite-difference time-domain method is adopted. The acoustic field generated by a traditional monopole source is also simulated and compared with the field generated by the phased arc array transmitter. Numerical simulation results show that the phased arc array radiates energy directionally in a narrow angular range in the borehole, thereby compressing the acoustic energy into a narrow range in the casing pipe, the cement, and the formation. We present the analyses of first-arrival waveforms and the amplitudes of casing waves at different azimuthal angles for the two different sources. The results indicate that employing a directional source facilitates azimuthal identification and analysis of possible channeling behind the casing pipe.

Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been conducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang’s formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.

Thin bed responses and correction methods for cased hole density logging

The study of the thin bed responses and correction methods in cased hole density logging can provide a theoretical basis for research to improve data processing methods. By using the Monte Carlo program MCNP, the change of detector count from thin beds with the vertical depth was calculated at different casing thicknesses. The calculation showed that with the low density thin bed moving upward, detector count first increased to a maximum then decreased. The responses of a thin bed with a high density were opposite to those of a thin bed with a low density. The change curve was symmetrical, and the maximums or minimums appeared at the midpoint between the detector and source. Besides, detector count increased with increasing thin bed thickness. At a specific thin bed thickness, further increase of thin bed thickness resulted in a slow increase of detector count then the count rate leveled off. In actual logging, the influence of adjacent formations on density log measurements can be ignored. Finally, based on numerical simulation correction methods for the dual influence of casing and thin beds are discussed.

In-service shear check of heated cased insulated flowlines

Starting friction would be induced and preserved somewhere along the seabed route of cased insulated flowlines（CIF） when the pipe carries service loads.The axial pipe-soil interaction can be divided into three pipe sections：the sliding section,the fixed section and the starting friction section.Although limited to a relatively small length of the pipe,the pipe coats of the starting friction section would suffer much higher shear force caused by thermal expansion than those of the sliding section or the fixed section.Based on the axial equilibrium equation of this kind of insulated pipeline,we developed a method for checking the shear force on CIF coats and their interfaces.The typical example shows that starting friction effect should be taken into account when checking the lap shear strength of heatshrinkable sleeves on CIF field joints.

Mechanical upper bowel obstruction caused by a large trichobezoar in a young woman: A very unusual case report

BACKGROUND Bezoars usually compile human fibers and debris.A special form of bezoar in case of psychologically altered individuals is the trichobezoar.It consists of voluntarily swallowed hair bulks and is normally removed via gastroscopy.Trichobezoars leading to ileus have rarely been reported.CASE SUMMARY A 24-year-old female patient presented to the emergency room with abdominal pain,nausea,and vomiting for 3 d.Her previous medical and psychiatric history was unremarkable.Laboratory analysis showed iron deficiency anemia,leukocytosis,and elevated liver enzymes.An abdominal CT scan revealed a dense structure in the patients’stomach which turned out to be a huge trichobezoar completely obstructing the pylorus.The trichobezoar had to be removed surgi-cally.During her postoperative course,a subcutaneous seroma formed.After a single puncture,the rest of the recovery process was unremarkable,and the patient recovered fully.CONCLUSION A mechanical bowel obstruction is a potentially life-threatening event for every patient.In our case a young female was suffering from severe symptoms of an obstruction which might have resulted in serious harm without successful surgical management.

Novel approach of ultrasound-guided lateral recess block for a patient with lateral recess stenosis: A case report

BACKGROUND Ultrasound guide technology,which can provide real-time visualization of the needle tip and tissues and avoid many adverse events,is widely used in mini-mally invasive therapy.However,the studies on ultrasound-guided Lateral recess block(LRB)are limited,this is probably because there is no recognized standard method for ultrasound scanning.This study aimed to evaluate the effect of ultrasound-guided LRB in patients with lateral recess stenosis(LRS).CASE SUMMARY A 65-year-old patient complained of low back pain accompanied occasionally by pain and numbness in the left lower limb.Physical examination showed ten-derness on the spinous process and paraspinal muscles from L1 to S1,extensor hallucis longus and tibialis anterior weakness(muscle strength:4-),and a positive straight leg raising test in the left lower limb(60°).Magnetic resonance imaging showed L4–L5 disc degeneration with left LRS and nerve root entrapment.Subsequently,the patient was diagnosed with LRS.This patient was treated with a novel ultrasound-guided LRB approach.The patient’s symptoms significantly improved without any complications at 1 wk postoperatively and at the 3-month follow-up.CONCLUSION This is the first report on the LRS treatment with ultrasound-guided LRB from the contralateral spinous process along the inner side of the articular process by out-plane technique.Further studies are expected to investigate the efficacy and safety of ultrasound-guided LRB for patients with LRS.

Hybrid treatment of varied orthodontic appliances for a patient with skeletal class II and temporomandibular joint disorders:A case report and review of literature

BACKGROUND The relation between orthodontic treatment and temporomandibular disorders(TMDs)is under debate;the management of TMD during orthodontic treatment has always been a challenge.If TMD symptoms occur during orthodontic treatment,an immediate pause of orthodontic adjustments is recommended;the treatment can resume when the symptoms are managed and stabilized.CASE SUMMARY This case report presents a patient(26-year-old,female)with angle class I,skeletal class II and TMDs.The treatment was a hybrid of clear aligners,fixed appliances and temporary anchorage devices(TADs).After 3 mo resting and treatment on her TMD,the patient’s TMD symptom alleviated,but her anterior occlusion displayed deep overbite.Therefore,the fixed appliances with TAD were used to correct the anterior deep-bite and level maxillary and mandibular deep curves.After the levelling,the patient showed dual bite with centric relation and maximum intercuspation discrepancy on her occlusion.After careful examination of temporomandibular joints(TMJ)position,the stable bite splint and Invisible Mandibular Advancement appliance were used to reconstruct her occlusion.Eventually,the improved facial appearance and relatively stable occlusion were achieved.The 1-year follow-up records showed there was no obvious change in TMJ morphology,and her occlusion was stable.CONCLUSION TMD screening and monitoring is of great clinical importance in the TMD susceptible patients.Hybrid treatment with clear aligners and fixed appliances and TADs is an effective treatment modality for the complex cases.

High-grade pancreatic intraepithelial neoplasia diagnosed based on changes in magnetic resonance cholangiopancreatography findings:A case report

BACKGROUND High-grade pancreatic intraepithelial neoplasia(PanIN)exhibits no mass and is not detected by any examination modalities.However,it can be diagnosed by pancreatic juice cytology from indirect findings.Most previous cases were diagnosed based on findings of a focal stricture of the main pancreatic duct(MPD)and caudal MPD dilatation and subsequent pancreatic juice cytology using endoscopic retrograde cholangiopancreatography(ERCP).We experienced a case of high-grade PanIN with an unclear MPD over a 20-mm range,but without caudal MPD dilatation on magnetic resonance cholangiopancreatography(MRCP).CASE SUMMARY A 60-year-old female patient underwent computed tomography for a follow-up of uterine cancer post-excision,which revealed pancreatic cysts.MRCP revealed an unclear MPD of the pancreatic body at a 20-mm length without caudal MPD dilatation.Thus,course observation was performed.After 24 mo,MRCP revealed an increased caudal MPD caliber and a larger pancreatic cyst.We performed ERCP and detected atypical cells suspected of adenocarcinoma by serial pancreatic juice aspiration cytology examination.We performed a distal pancreatectomy and obtained a histopathological diagnosis of high-grade PanIN.Pancreatic parenchyma invasion was not observed,and curative resection was achieved.CONCLUSION High-grade Pan-IN may cause MPD narrowing in a long range without caudal MPD dilatation.

Experimental studies of linear phased-array transmitter acoustic logging in cased wells with scaled borehole models

Laboratory cased-hole acoustic logging simulations are developed with the linear phased-array transmitter in scaled cased well models for evaluating the feasibility of extracting formation acoustic parameters through casing.The full waveforms are measured with different cement bonding models.By analyzing the measured wavetrains and the time-slowness correlation graphs,it is showed that when the generation conditions of the refracted compressional wave and the refracted shear wave are reached successively by regulating the direction of acoustic beam radiated from the linear phased-array transmitter,steered angle of the main radiation lobe with both good bonding interfaces.The refracted compressional wave and the refracted shear wave can be stimulated obviously and the casing wave can be suppressed effectively,even when the casing and cement（or the cement and formation） is not bonded.Based on these observations, it is worthwhile to apply the linear phased-array transmitter to determine formation velocities,particularly in poorly bonded cased well.The works establish the experimental and theoretical foundation for new generation cased-hole acoustic logging tool development.

Prediction models of burst strength degradation for casing with considerations of both wear and corrosion

Casing wear and casing corrosion are serious problems affecting casing integrity failure in deep and ultra-deep wells.This paper aims to predict the casing burst strength with considerations of both wear and corrosion.Firstly,the crescent wear shape is simplified into three categories according to common mathematical models.Then,based on the mechano-electrochemical(M-E)interaction,the prediction model of corrosion depth is built with worn depth as the initial condition,and the prediction models of burst strength of the worn casing and corroded casing are obtained.Secondly,the accuracy of different prediction models is validated by numerical simulation,and the main influence factors on casing strength are obtained.At last,the theoretical models are applied to an ultra-deep well in Northwest China,and the dangerous well sections caused by wear and corrosion are predicted,and the corrosion rate threshold to ensure the safety of casing is obtained.The results show that the existence of wear defects results in a stress concentration and enhanced M-E interaction on corrosion depth growth.The accuracy of different mathematical models is different:the slot ring model is most accurate for predicting corrosion depth,and the eccentric model is most accurate for predicting the burst strength of corroded casing.The burst strength of the casing will be overestimated by more than one-third if the M-E interaction is neglected,so the coupling effect of wear and corrosion should be sufficiently considered in casing integrity evaluation.

Double casing warhead with sandwiched charge:The axial distribution of fragments velocities

The double casing warhead with sandwiched charge is a novel fragmentation warhead that can produce two groups of fragments with different velocity,and the previous work has presented a calculation formula to determine the maximum fragment velocity.The current work builds on the published formula to further develop a formula for calculating the axial distribution characteristics of the fragment velocity.For this type of warhead,the simulation of the dispersion characteristics of the detonation products at different positions shows that the detonation products at the ends have a much larger axial velocity than those in the middle,and the detonation products have a greater axial dispersion velocity when they are closer to the central axis.The loading process and the fragment velocity vary with the axial position for both casing layers,and the total velocity of the fragments is the vector sum of the radial velocity and the axial velocity.At the same axial position,the acceleration time of the inner casing is greater than that of the outer casing.For the same casing,the fragments generated at the ends have a longer acceleration time than the fragments from the middle.The proposed formula is validated with the X-ray radiography results of the four warheads previously tested experimentally and the 3D smoothedparticle hydrodynamics numerical simulation results of several series of new warheads with different configurations.The formula can accurately and reliably calculate the fragment velocity when the lengthto-diameter ratio of the charge is greater than 1.5 and the thickness of the casing is less than 20%its inner radius.This work thus provides a key reference for the theoretical analysis and the design of warheads with multiple casings.

Cronkhite-Canada syndrome with esophagus involvement and sixyear follow-up:A case report

BACKGROUND Cronkhite-Canada syndrome(CCS)is a rare,noninherited disease characterized by gastrointestinal polyposis with diarrhea and ectodermal abnormalities.CCS polyps are distributed through the whole digestive tract,and they are common in the stomach and colon but very uncommon in the esophagus.CASE SUMMARY Here,we present a case of a 63-year-old man with skin hyperpigmentation accompanied by diarrhea,alopecia,and loss of his fingernails.Laboratory data indicated anemia,hypoalbuminemia,hypocalcemia,hypokalemia,and positive fecal occult blood.Endoscopy showed numerous polyps scattered throughout the digestive tract,including the esophagus.He was treated with nutritional support and glucocorticoids with remission of his symptoms.CONCLUSION Comprehensive treatment led by hormonal therapy can result in partial or full remission of clinical symptoms.Treatment should be individualized for each patient according to their therapy response.Surveillance endoscopy is necessary for assessing mucosal disease activity and detecting malignant transformation.

Patient satisfaction and follow-up adherence to glaucoma case management clinic in China

AIM:To assess glaucoma patient satisfaction and follow-up adherence in case management and identify associated predictors to improve healthcare quality and patient outcomes.METHODS:In this cross-sectional study,a total of 119 patients completed a Patient Satisfaction Questionnaire-18 and a sociodemographic questionnaire.Clinical data was obtained from the case management system.Follow-up adherence was defined as completing each follow-up within±30d of the scheduled time set by ophthalmologists during the study period.RESULTS:Average satisfaction scored 78.65±7,with an average of 4.39±0.58 across the seven dimensions.Age negatively correlated with satisfaction(P=0.008),whilst patients with follow-up duration of 2 or more years reported higher satisfaction(P=0.045).Multivariate logistics regression analysis revealed that longer follow-up durations were associated with lower follow-up adherence(OR=0.97,95%CI,0.95-1.00,P=0.044).Additionally,patients with suspected glaucoma(OR=2.72,95%CI,1.03-7.20,P=0.044)and those with an annual income over 100000 Chinese yuan demonstrated higher adherence(OR=5.57,95%CI,1.00-30.89,P=0.049).CONCLUSION:The case management model proves effective for glaucoma patients,with positive adherence rates.The implementation of this model can be optimized in the future based on the identified factors and extended to glaucoma patients in more hospitals.

Myocardial metastasis from ZEB1-and TWIST-positive spindle cell carcinoma of the esophagus:A case report

BACKGROUND Metastatic cardiac tumors are known to occur more frequently than primary cardiac tumors,however,they often remain asymptomatic and are commonly dis-covered on autopsy.Malignant tumors with a relatively high frequency of cardiac metastasis include mesothelioma,melanoma,lung cancer,and breast cancer,whereas reports of esophageal cancer with cardiac metastasis are rare.CASE SUMMARY The case of a 60-year-old man who complained of dysphagia is presented.Upper gastrointestinal endoscopy showed a submucosal tumor-like elevated lesion in the esophagus causing stenosis.Contrast-enhanced computed tomography showed left atrial compression due to the esophageal tumor,multiple liver and lung metastases,and a left pleural effusion.Pathological examination of a biopsy speci-men from the esophageal tumor showed spindle-shaped cells,raising suspicion of esophageal sarcoma.The disease progressed rapidly,and systemic chemotherapy was deemed necessary,however,due to his poor general condition,adminis-tration of cytotoxic agents was considered difficult.Given his high Combined Positive Score,nivolumab was administered,however,the patient soon died from the disease.The autopsy confirmed spindle cell carcinoma(SCC)of the esophagus and cardiac metastasis with similar histological features.Cancer stem cell markers,ZEB1 and TWIST,were positive in both the primary tumor and the cardiac metastasis.CONCLUSION To the best of our knowledge,there have been no prior reports of cardiac metastasis of esophageal SCC.This case highlights our experience with a patient with esophageal SCC who progressed rapidly and died from the disease,with the autopsy examination showing cardiac metastasis.

A novel algorithm for evaluating cement azimuthal density based on perturbation theory in horizontal well

Cement density monitoring plays a vital role in evaluating the quality of cementing projects,which is of great significance to the development of oil and gas.However,the presence of inhomogeneous cement distribution and casing eccentricity in horizontal wells often complicates the accurate evaluation of cement azimuthal density.In this regard,this paper proposes an algorithm to calculate the cement azimuthal density in horizontal wells using a multi-detector gamma-ray detection system.The spatial dynamic response functions are simulated to obtain the influence of cement density on gamma-ray counts by the perturbation theory,and the contribution of cement density in six sectors to the gamma-ray recorded by different detectors is obtained by integrating the spatial dynamic response functions.Combined with the relationship between gamma-ray counts and cement density,a multi-parameter calculation equation system is established,and the regularized Newton iteration method is employed to invert casing eccentricity and cement azimuthal density.This approach ensures the stability of the inversion process while simultaneously achieving an accuracy of 0.05 g/cm^(3) for the cement azimuthal density.This accuracy level is ten times higher compared to density accuracy calculated using calibration equations.Overall,this algorithm enhances the accuracy of cement azimuthal density evaluation,provides valuable technical support for the monitoring of cement azimuthal density in the oil and gas industry.

Outcomes of endoscopic sclerotherapy for jejunal varices at the site of choledochojejunostomy (with video): Three case reports

BACKGROUND Hemorrhage associated with varices at the site of choledochojejunostomy is an unusual,difficult to treat,and often fatal manifestation of portal hypertension.So far,no treatment guidelines have been established.CASE SUMMARY We reported three patients with jejunal varices at the site of choledochojejun-ostomy managed by endoscopic sclerotherapy with lauromacrogol/α-butyl cyanoacrylate injection at our institution between June 2021 and August 2023.We reviewed all patient records,clinical presentation,endoscopic findings and treatment,outcomes and follow-up.Three patients who underwent pancre-aticoduodenectomy with a Whipple anastomosis were examined using conven-tional upper gastrointestinal endoscopy for suspected hemorrhage from the afferent jejunal loop.Varices with stigmata of recent hemorrhage or active he-morrhage were observed around the choledochojejunostomy site in all three patients.Endoscopic injection of lauromacrogol/α-butyl cyanoacrylate was carried out at jejunal varices for all three patients.The bleeding ceased and patency was observed for 26 and 2 months in two patients.In one patient with multiorgan failure and internal environment disturbance,rebleeding occurred 1 month after endoscopic sclerotherapy,and despite a second endoscopic sclero-therapy,repeated episodes of bleeding and multiorgan failure resulted in eventual death.CONCLUSION We conclude that endoscopic sclerotherapy with lauromacrogol/α-butyl cyanoac-rylate injection can be an easy,effective,safe and low-cost treatment option for jejunal varicose bleeding at the site of choledochojejunostomy.

C-CORE:Clustering by Code Representation to Prioritize Test Cases in Compiler Testing

Edge devices,due to their limited computational and storage resources,often require the use of compilers for program optimization.Therefore,ensuring the security and reliability of these compilers is of paramount importance in the emerging field of edge AI.One widely used testing method for this purpose is fuzz testing,which detects bugs by inputting random test cases into the target program.However,this process consumes significant time and resources.To improve the efficiency of compiler fuzz testing,it is common practice to utilize test case prioritization techniques.Some researchers use machine learning to predict the code coverage of test cases,aiming to maximize the test capability for the target compiler by increasing the overall predicted coverage of the test cases.Nevertheless,these methods can only forecast the code coverage of the compiler at a specific optimization level,potentially missing many optimization-related bugs.In this paper,we introduce C-CORE(short for Clustering by Code Representation),the first framework to prioritize test cases according to their code representations,which are derived directly from the source codes.This approach avoids being limited to specific compiler states and extends to a broader range of compiler bugs.Specifically,we first train a scaled pre-trained programming language model to capture as many common features as possible from the test cases generated by a fuzzer.Using this pre-trained model,we then train two downstream models:one for predicting the likelihood of triggering a bug and another for identifying code representations associated with bugs.Subsequently,we cluster the test cases according to their code representations and select the highest-scoring test case from each cluster as the high-quality test case.This reduction in redundant testing cases leads to time savings.Comprehensive evaluation results reveal that code representations are better at distinguishing test capabilities,and C-CORE significantly enhances testing efficiency.Across four datasets,C-CORE increases the average of the percentage of faults detected(APFD)value by 0.16 to 0.31 and reduces test time by over 50% in 46% of cases.When compared to the best results from approaches using predicted code coverage,C-CORE improves the APFD value by 1.1% to 12.3% and achieves an overall time-saving of 159.1%.

Anti-EGFR antibody monotherapy for colorectal cancer with severe hyperbilirubinemia: A case report

BACKGROUND Hyperbilirubinemia with hepatic metastases is a common complication and a poor prognostic factor for colorectal cancer(CRC).Effective drainage is often im-possible before initiating systemic chemotherapy,owing to the liver’s diffuse metastatic involvement.Moreover,an appropriate chemotherapeutic approach for the treatment of hyperbilirubinemia is currently unavailable.CASE SUMMARY The patient,a man in his 50s,presented with progressive fatigue and severe jaundice.Computed tomography revealed multiple hepatic masses with thick-ened walls in the sigmoid colon,which was pathologically confirmed as a well-differentiated adenocarcinoma.No RAS or BRAF mutations were detected.The Eastern Cooperative Oncology Group(ECOG)performance status(PS)score was 2.Biliary drainage was impossible due to the absence of a dilated bile duct,and panitumumab monotherapy was promptly initiated.Subsequently,the bilirubin level decreased and then normalized,and the patient’s PS improved to zero ECOG score after four cycles of therapy without significant adverse events.CONCLUSION Anti-EGFR antibody monotherapy is a safe and effective treatment for RAS wild-type CRC and hepatic metastases with severe hyperbilirubinemia.