Spatial Variability of Soil Cation Exchange Capacity in Hilly Tea Plantation Soils Under Different Sampling Scales

Studies on the spatial variability of the soil cation exchange capacity （CEC） were made to provide a theoretical basis for an ecological tea plantation and management of soil fertilizer in the tea plantation. Geostatistics were used to analyze the spatial variability of soil CEC in the tea plantation site on Mengding Mountain in Sichuan Province of China on two sampling scales. It was found that, （1） on the small scale, the soil CEC was intensively spatially correlative, the rate of nugget to sill was 18.84% and the spatially dependent range was 1 818 m, and structural factors were the main factors that affected the spatial variability of the soil CEC; （2） on the microscale, the soil CEC was also consumingly spatially dependent, and the rate of nugget to sill was 16.52%, the spatially dependent range was 311 m, and the main factors affecting the spatial variability were just the same as mentioned earlier. On the small scale, soil CEC had a stronger anisotropic structure on the slope aspect, and a weaker one on the lateral side. According to the ordinary Kriging method, the equivalence of soil CEC distributed along the lateral aspect of the slope from northeast to southwest, and the soil CEC reduced as the elevation went down. On the microscale, the anisotropic structure was different from that measured on the small scale. It had a stronger anisotropic structure on the aspect that was near the aspect of the slope, and a weaker one near the lateral aspect of the slope. The soil CEC distributed along the lateral aspect of the slope and some distributed in the form of plots. From the top to the bottom of the slope, the soil CEC increased initially, and then reduced, and finally increased.

Cokriging of Soil Cation Exchange Capacity Using the First Principal Component Derived from Soil Physico-Chemical Properties

As soil cation exchange capacity （CEC） is a vital indicator of soil quality and pollutant sequestration capacity,a study was conducted to evaluate cokriging of CEC with the principal components derived from soil physico-chemical properties.In Qingdao,China,107 soil samples were collected.Soil CEC was estimated by using 86 soil samples for prediction and 21 soil samples for test.The first two principal components （PC1 and PC2） together explained 60.2% of the total variance of soil physico-chemical properties.The PC1 was highly correlated with CEC （r=0.76,P0.01）,whereas there was no significant correlation between CEC and PC2 （r=0.03）.The PC1 was then used as an auxiliary variable for the prediction of soil CEC.Mean error （ME） and root mean square error （RMSE） of kriging for the test dataset were-1.76 and 3.67 cmolc kg-1,and ME and RMSE of cokriging for the test dataset were-1.47 and 2.95 cmolc kg-1,respectively.The cross-validation R2 for the prediction dataset was 0.24 for kriging and 0.39 for cokriging.The results show that cokriging with PC1 is more reliable than kriging for spatial interpolation.In addition,principal components have the highest potential for cokriging predictions when the principal components have good correlations with the primary variables.

Protein retention in dextran-grafted cation exchange chromatography:The influence of pHs,counterions and polymer structure

Polymer-grafted ion exchange adsorbents were of great interest for the development of high-performance protein chromatography in biopharmaceutical and related fields.In this work,protein retention was systematically investigated in ion exchange chromatography packed respectively with dextran-grafted cation exchange adsorbents containing sulphopropyl(SP)ligand,SP Sepharose XL and Capto S,and non-grafted cation exchange adsorbent,SP Sepharose FF,using five proteins.With an increase of buffer p Hs,retention factors of proteins decreased among all the adsorbents,demonstrating the dominant role of electrostatic interaction for protein binding on cation exchange adsorbents.The evidences further revealed that the scattered positive charges on the surface of protein molecules,rather than net charge of protein molecule,determined protein retention on cation exchange adsorbent.Likely,counterions including NH4^+,K^+,Na^+and Mg^2+exhibited distinct influence on protein retention.It was well ascribed to solvent-mediated indirect ion-macromolecule interactions and direct ion-macromolecule interactions.Compared with SP Sepharose FF,polymer structure in dextran-grafted cation exchange adsorbents ultimately brought about different ligand distributions and smaller pore sizes,thereby regulating protein retention in cation exchange chromatography.By comparing the retention of myoglobin andβ-lactoglobulin B in SP Sepharose XL and Capto S,we reasonably speculated that the enhancement of nonelectrostatic interaction caused by reducing the space arm length was a major reason for an increasing retention factor of myoglobin in Capto S.The results in this research help us understand adsorption mechanism of protein in polymer-grafted adsorbents and give scientific guidance for the development of chromatographic materials.

Synthesis of cation exchange resin-supported iron and magnesium oxides/hydroxides composite for nitrate removal in water

In this study,we reported on the concept and practical use of cation exchange resin(CER)for removing anions in water via pretreating the CER with metal salts.The cation exchange resinsupported iron and magnesium oxides/hydroxides composite(FeMg/CER)was synthesized and introduced as a new and potential adsorbent for selective removal of nitrate ion in the water environment.Characteristics of FeMg/CER were determined by techniques such as Fouriertransform infrared spectroscopy,scanning electron microscopy,and Xray diffraction.The results showed that FeMg/CER material had a high nitrate adsorption capacity of 200 mg NO_(3)^()·g^(1)with a fast equilibrium adsorption time of 30 min at pH 5.In addition,it had good durability of at least 10 times of regeneration,which could be applied to practical water and wastewater treatment.

Kinetic and thermodynamic studies of the esterification of acidified oil catalyzed by sulfonated cation exchange resin

This study describes the kinetics and thermodynamics of the esterification of acidified oil with methanol catalyzed by sulfonated cation exchange resins（SCER）. The effects of the mass ratio of methanol to acidified oil,reaction temperature,and catalyst loading were studied to optimize the conditions for maximum conversion of free fatty acids（FFAs）. The results showed that the optimal conversion rate of FFAs was 91.87% at the mass ratio of methanol to acidified oil of 2.5：1.0,reaction temperature of 65.0 °C,catalyst loading of 5.0 g and reaction time of 8.0 h. The external and internal mass transfer resistances were negligible based on the experimental results and a pseudo-homogeneous kinetic model was proposed for the esterification. The activation energy and thermodynamic parameters including G,S and H were determined. The conversion rates of FFAs obtained from the established model were in good agreement with the experimental data.

A statistical reappraisal of the relationship between liquid limit and specific surface area, cation exchange capacity and activity of clays

More than 500 datasets from the literature have been used to evaluate the relationships of specific surface area (SSA),cation exchange capacity (CEC) and activity versus the liquid limit (LL).The correlations gave R^2 values ranging between 0.71 and 0.92.Independent data were also used to validate the correlations.Estimated SSA values slightly overestimate the measured SSA up to 100 m^2/g.Regarding the estimated CEC values,they overestimated the measured CEC values up to 20 meq/(100 g).A probabilistic approach was performed for the correlations of SSA,CEC and activity versus LL.The analysis shows that the relations of SSA,CEC and activity with LL are robust.Using the LL values,it is possible to assess other basic engineering properties of clays.

Poly [ (chloromethyl) styrene-co-divinylbenzene] Continuous Rod Column of Weak Cation Exchange Chromatography and its Applications in the Separation of Biopolymers

Macroporous poly [(chloromethyl) styrene-co-divinylbenzene] continuous rod was prepared by direct polymerization of the monomers in the presence of a porogenic diluent inside an empty chromatographic column. A new 'in-situ' technique was used to modify the synthesized polymer rod for a weak cation exchanger and it has been used successfully for the separation of biopolymers. It was found that the back pressure of the continuous rod column was much lower and its surface was proved to be modified well.

Elements, Structure and Electrochemical Property of Carbon Derived from La^(3+) Adulterating Polystyrene Cation Exchange Resin

The polystyrene cation exchange resin was exchanged by La 3+ and then were carbonized to make resin carbon material. The electrochemical properties of the resin carbon material as the electrode of the lithium ion cell were investigated. The test results show that comparing with the polystyrene cation exchange resin without adulterating, the contents of hydrogen, oxygen and sulfur are changed obviously for the resin carbon material derived from the La 3+ adulterating polystyrene cation exchange resin. The contents of hydrogen and oxygen are increased, and the one of sulfur is decreased. The test results also indicate that it is more easily to form the stratum graphite minicrystal structure with bigger diameter for the La 3+ adulterating resin. According to the electrochemical test results, the electrode derived from La 3+ adulterating polystyrene cation exchange resin has much better electrochemical property, and the capacity of charge and discharge of the electrode is increased about 30 mAh·g -1 in average.

Boosting solar water oxidation activity of BiVO_(4) photoanode through an efficient in-situ selective surface cation exchange strategy

The sluggish kinetics for water oxidation is recognized as one of the major problems for the unsatisfied photoelectrochemical(PEC) performance. Herein, we developed a feasible strategy based on in-situ selective surface cation exchange, for activating surface water oxidation reactivity toward boosted PEC water oxidation of BiVO_(4) photoanodes with fundamentally improved surface charge transfer. The asconstructed Co/BiVO_(4) photoanodes exhibit 2.6 times increase in photocurrent density with superior stability, in comparison to those of pristine counterpart. Moreover, the faradaic efficiency of as-fabricated photoanode can be up to ~ 95% at 1.23 V(vs. RHE). The unique selective replacement of Bi by Co on the surface could modify the electronic structure of BiVO_(4) with reduced energy barrier of the deprotonation of OH^(+) to O, thus favoring the overall excellent PEC performance of Co/BiVO_(4) photoanode.

Cs-content-dependent organic cation exchange in FA1-xCsxPbI3 perovskite

FA-Cs mixed-cation perovskite has been reported as a promising candidate for obtaining highly efficient and stable photovoltaic devices.Phenylethylamine iodide(PEAI)post-treatment is a widely used and effective method for surface passivation of FA-Cs perovskite layer in devices.However,it is still controversial whether the PEAI post-treatment would form two-dimensional(2D)perovskite PEA_(2)PbI_(4) capping layer or just result in PEA+terminated surface.Here in this work,the function of PEAI post-treatment on FA-Cs mixed-cation perovskite FA_(1-x)Cs_(x)PbI_(3)(x=0.1–0.9)with varied Cs contents is elucidated.With increased Cs content,the FA-Cs perovskite shows higher resistance to the cation exchange between FA+and PEA+.This Cs-content-dependent cation exchange results in the different PEAI reaction preferences with FA-Cs mixed-cation perovskites.Furthermore,higher Cs content with stronger resistance to cation exchange reaction leads to a wider processing window for post-treatment and defect passivation,which is beneficial for the fabrication of large-scale photovoltaic devices.

The Cation Exchange Capacity of Fibrous Feedstuff and Its Nutritive Characteristics

Current researches on the nutritive characteristics of fibrous feedstuff through determining the feedstuff cation exchange capacity (CEC) to evaluate its nutritive value at home and abroad were comprehensively discribed. and the methods of determining CEC value and the correlation between CEC value and chemical compositions, pH value, and the effect of CEC value on the digestion kinetics in ruminants were also emphatically introduced. The results of research showed that the CEC values of different feedstuff are different, closely correlated with nitrogen and acid detergent fibre (ADF) and lignin (LIG) content of the feedstuff. At the same time, there are markedly effect of CEC value in diet on the nutrients flow of digesta in the digestive tract of ruminants, the degradation rate and digestibility of nutrients in the rumen.

USE OF CATION EXCHANGE RESIN IN SYNTHESIS OF N-SUBSTITUTED-1-AMINOALKANEPHOSPHONATE AND-PHOSPHINIC ACIDS

Strongly acidic cation exchange resin(1x1,H form)has been successfully used as a catalyst in synthesis of diphenyl N-benzyloxycarbonyl-1-aminobenzylphosphonate, N-benzyloxycarbonyl-1-aminobenzylphenylphosphinic acid and N-p-tolylsulfonyl-1-aminobenzyl phenylphosphinic acid in high yields.

Fabrication of mixed perovskite organic cation thin films via controllable cation exchange

Here in this paper, we demonstrate a facile technique for creating the mixed formamidinium（HN = CHNH_3~＋, FA~＋）and methylammonium（CH_3NH_3~＋, MA~＋） cations in the lead iodide perovskite. This technique entails a facile drop-casting of formamidinium iodide（FAI） solutions on as-prepared MAPbI_3 perovskite thin films under the controlled conditions,which leads to controllable displacement of the MA~＋ cations by FA~＋ cations in the perovskite structure at room temperature. Uniform and controllable mixed organic cation perovskite thin films without a ＂bi-layered＂ or graded structure are achieved. By applying this approach to photovoltaic devices, we are able to improve the performances of devices through extending their optical-absorption onset further into the infrared region to enhance solar-light harvesting. Additionally,this work provides a simple and efficient technique to tune the structural, electrical, and optoelectronic properties of the light-harvesting materials for high-performance perovskite solar cells.

Effects of Functionalized Silica Nanoparticles on Characteristics of Nanocomposites PES Cation Exchange Membranes

Nanocomposite cation exchange membranes（CEMs） were prepared by adding various loadings of functionalized silica nanoparticles to the sulfonated polyethersulfone（s PES） polymeric matrix. The silica nanoparticles were functionalized by mercaptopropyl（F1, IEC=0）, propylsulfonic acid（F2, IEC= 2.71）, and sulfonic acid（F3, IEC=2.84）. The properties of prepared membranes were investigated by varying the loadings of functionalized silica nanoparticles. Applying functionalized nanoparticles provides additional ion exchange groups and enhances water contents as well as conductivities and permselectivities of the membranes. The maximum IEC of 1.9 meq.g^-1 was obtained for the membrane having 3 wt% F3 nanoparticles and the maximum conductivity of 0.237 S·cm^-1 was achieved for the membrane having 2 wt% F3 nanoparticles, which were 19.6% and 64% higher than the corresponding values for s PES membrane, respectively. The excellent properties of the nanocomposite cation-exchange membranes make them appropriate candidates for electrodialysis and desalination processes.

The activity of Zn precursors determines the cation exchange reaction kinetics with Ag_(2)S:Zn-doped Ag_(2)S or Ag_(2)S@ZnS QDs

Cation exchange(CE)has been emerged as a promising post-synthesis strategy of colloidal nanocrystals.However,it is unclear how the cation precursor affects the CE process and the final colloidal nanocrystals.Herein,we utilized two Zn-B Lewis acidbase adduct complexes(B=oleylamine(OAM)and methanol(MeOH))as Zn precursors for CE with Ag_(2)S quantum dots(QDs).Our study revealed that the steric hindrance and complexing capabilities of Zn precursor significantly affect the CE kinetics.As a result,the Zn-doped Ag_(2)S(Zn:Ag_(2)S)and Ag_(2)S@ZnS core–shell QDs were successfully obtained with enormous enhancement of their photoluminescence(PL)intensities.Theoretical simulation showed that the Zn-OAM with higher desolvation energy and spatial hindrance tended to form doped Zn:Ag_(2)S QDs due to the inefficient cation exchange.Whereas the Zn-MeOH with lower exchange barrier promoted the conversion of Ag-S to Zn-S,thus forming Ag_(2)S@ZnS core–shell QDs.We anticipate that this finding will enrich the regulatory approaches of post-synthesis of colloidal nanocrystals with desirable properties.

Soil exchangeable base cations along a chronosequence of Caragana microphylla plantation in a semi-arid sandy land,China

As a pioneer leguminous shrub species for vegetation re-establishment, Caragana microphylla is widely distributed in the semi-fixed and fixed sandy lands of the Horqin region, North China. C. microphylla planta- tions modify organic carbon （SOC）, nitrogen （N） and phosphorus dynamics, bulk density and water-holding capacity and biological activities in soils, but little is known with regard to soil exchange properties. Variation in soil ex- changeable base cations was examined under C. microphylla plantations with an age sequence of 0, 5, 10, and 22 years in the Horqin Sandy Land, and at the depth of 0-10, 10-20, and 20-30 cm, respectively. C. microphylla has been planted on the non-vegetated sand dunes with similar physical-chemical soil properties. The results showed that exchangeable calcium （Ca）, magnesium （Mg）, and potassium （K）, and cation exchange capacity （CEC） were significantly increased, and Ca saturation tended to decrease, while Mg and K saturations were increased with the plantation years. No difference was observed for exchangeable sodium （Na） neither with plantation years nor at soil depths. Of all the base cations and soil layers, exchangeable K at the depth of 0-10 cm accumulated most quickly, and it increased by 1.76, 3.16, and 4.25 times, respectively after C. microphylla was planted for 5, 10, and 22 years. Exchangeable Ca, Mg, and K, and CEC were significantly （P〈0.001） and positively correlated with SOC, total N, pH and electrical conductivity （EC）. Soil pH and SOC are regarded as the main factors influencing the variation in ex- changeable cations, and the preferential absorption of cations by plants and different leaching rates of base cations that modify cation saturations under C. microphylla plantation. It is concluded that as a nitrogen-fixation species, C. microphylla plantation is beneficial to increasing exchangeable base cations and CEC in soils, and therefore can improve soil fertility and create favorable microenvironments for plants and creatures in the semi-arid sandy land ecosystems.

Influence of Types and Charges of Exchangeable Cations on Ciprofloxacin Sorption by Montmorillonite

As one of the most important soil components, montmorillonite plays a vital role in transport and retention of organic pollutants in soils. Ciprofloxacin （CIP）, an antibiotic of fluoroquiolones, has been frequently detected in water and soil environments due to its wide use in human and veterinary medicine. In this study, the adsorption of CIP onto different homoionic montmorillonite such as Na-, Ca- and Al-MMT was investigated, and the influence of types and charges of exchangeable cations in the interlayer of montmorillonite on CIP adsorption was evaluated. The results showed that different homoionic montmorillonite exhibited different sorption capacity of CIP. At pH 3, the sorption capacity of CIP decreased in the order Na-MMT Ca-MMT Al-MMT, following the lyotropic series. When solution pH increased to 11, the sorption capacity of CIP followed the order Ca-MMT Al-MMT Na-MMT. Accompanying CIP adsorption on Ca-MMT, a certain amount of Ca2＋ was released into solution. Compared to pH 3, the lower Ca concentration in solution at pH 11 indicated that the adsorption of CIP on Ca-MMT at strong alkaline pH was no longer via cation exchange, and surface complexation or cation bridging might contribute to CIP adsorption. The adsorption of CIP on Na- and Ca-MMT at pH 3 and 11 resulted in the expansion of d-spacing, indicative of intercalation of CIP into the interlayer space of the montmorillonite. However, a decrease of d-spacing was observed when CIP adsorbed on Al-MMT at pH 11, which might be attributed to the dissolution of Al-CIP complex formed between CIP and Al3＋ in the interlayer of montmorillonite. The results suggest that the types and charges of exchangeable cations in the interlayer of montmorillonite play an important role in CIP adsorption on montmorillonite.

Preparation of High-capacity, Monodisperse Polymeric Weak Cation Exchange Packings Using Surface-initiated Atom Transfer Radical Polymerization and Its Chromatographic Properties

A novel stationary phase for weak cation exchange （WCX） chromatography was prepared by ＂grafting from＂ strategy. Surface initiated atom transfer radical polymerization （ATRP） of acrylic acid （AA） was conducted in toluene medium, starting from the macromolecule initiators of poly（4-vinylbenzyl chloride-co-divinylbenzene） （PcMs/DvB） beads, The amounts of poly（acrylic acid） grafted chains with different ATRP formulations were calculated based on the elemental analyses. The poly（acrylic acid） grafted beads obtained with different ATRP formula- tions were tried as chromatographic packings in the separation of proteins by ion-exchange chromatography. The effect of the poly（acrylic acid） grafted chain lengths on PCMS/DVB beads for the separation of proteins was investigated in details. Simultaneously, characterization of the column was investigated as ion chromatographic stationary phase for the separation of inorganic cations. The results show that poly（acrylic acid） grafted columns had excellent performance for separation of proteins and inorganic cations. The highest of the dynamic capacity of the column was 35.55 mg/mL. The columns were provided with high column efficiency.

Preparation of Medium Cation Exchange Stationary Phase of Polymeric Matrix and Their Chromatographic Properties

Based on the monodisperse poly（glycidyl methacrylate-co-ethylenedimethacrylate） beads （PGMA/EDMA） with macropore as a medium, a new hydrophilic medium cation exchange （MCX） stationary phase for HPLC was synthesized by a new chemically modified method. The stationary phase was evaluated with the property of ion exchange, separability, reproducibility, hydrophilicity, effect of salt concentration, salt types, column loading and pH on the separation and retention of proteins in detail. It was found that it follows ion exchange chromatographic （IEC） retention mechanism. The measured bioactivity recovery for lysozyme was （96 ± 5）%. The dynamic protein loading capacity of the synthesized MCX packings was 21.8 mg/g. Five proteins were almost completely separated within 6.0 min at a flow rate of 4 mL/min using the synthesized MCX resin. The MCX resin was also used for the rapid separation and purification of lysozyme from egg white with only one step. The purity and specific bioactivity of the purified lysozyme was found more than 95% and 70345 U/mg, respectively.