Cationic ring-opening polymerization of 3,3-bis(chloromethyl)oxacyclobutane in ionic liquids

Cationic ring-opening polymerization of 3,3-bis（chloromethyl）oxacyclobutane catalyzed by BF3.OEt2 was carded out in ionic liquids [bmim]BF4 and [bmim]PF6. The influences of BCMO concentration and molar ratio of BCMO/BF3.OEt2 on the molecular weights and yield of PBCMO were investigated. The polymerization in ionic liquids proceed to high conversions, although molecular weights are limited, similar to polymerization in organic solvent such as CH2Cl2. Follow a viewpoint of green chemistry, we feel ionic liquid [bmim]BF4 is superior to [bmim]PF6. Extracting [bmim]PF6 from the product using organic solvent as extractant limits its advantage as a green reaction media.

SYNTHESIS AND CATIONIC RING-OPENING POLYMERIZATION OF 1, 4-ANHYDRO-2, 3-DI-O-(P-AZIDOBENZYL)-α-D-RIBOPYRANOSE

New highly stereoregular 2, 3 -di- O-(p-azidobenzyl )-(1 →5 ) - α-D -ribofuranan was synthesized byselective ring-opening polymerization of 1, 4-anhydro-2, 3 - di-O -(p-azidobenzyl )-α-D -ribopyranose(ADABR) using phosphorus pentafluoride or tin tetrachloride as catalyst at low temperature indichloromethane. The monomer was obtained by the reaction of p - bromomethyl -phenyleneazide with 1, 4 -anhydro-α-D-ribose in DMF. The structure of poly(ADANR) was identified by specific rotation and ^(13)C-NMR spectroscopy. Acid chloride-AgCl_4 complex catalyst such as CH_2=C(CH_3)C^+OClO_4^- used in thepolymerization resulted in polymers with mixed structures, i.e. (1→5)-α-D-ribofuranosidic and (1→4)-β-D-ribopyranosidic units. However, with C_6H_5C^+OClO_4^- as catalyst, pure (1→5)-α-D-ribofuranan was obtained.The effects of catalyst, polymerization temperature and time on polymer stereoregularity were examined, andthe mechanism of the ring-opening polymerization was discussed.

Real-time Monitoring of Living Cationic Ring-opening Polymerization of THF and Direct Prediction of Equilibrium Molecular Weight of Poly THF

A convenient real-time monitoring of monomer concentration during living cationic ring-opening polymerizations of tetrahydrofuran（THF） initiated with methyl triflate（Me OTf） has been developed for kinetic investigation and determination of equilibrium monomer concentration（[M]e） via in situ FTIR spectroscopy in combination with a diamond tipped attenuated total reflectance（ATR） immersion probe. The polymerization rate was first order with respect to monomer concentration and initiator concentration from the linear slope of ln（[M]0-[M]e）/（[M]-[M]e） versus polymerization time at different temperatures in various solvents. [M]e decreased linearly with initial monomer concentration while increased exponentially with increasing polymerization temperature. The equilibrium also strongly depends on solvent polarity and its interaction with monomer. The equilibrium polymerization time（te） decreased with increasing solvent polarity and decreased linearly with increasing [M]0 in three solvents with different slopes to the same point of bulk polymerization in the absence of solvent. Equation of Mn,e = 72.1/（0.14–0.04[M]e） has been established to provide a simple and effective approach for the prediction for the number-average molecular weight of poly THFs at equilibrium state（Mn,e） in the equilibrium living cationic ring-opening polymerization of THF at 0 °C.

STUDY ON CATIONIC RING-OPENING COPOLYMERIZATION OF 1,4-ANHYDRO-2,3-DI-O-BENZYL-α-D-RIBOPYRANOSE WITH 1,4-ANHYDRO-2,3-O-ISOPROPYLIDENE-α-D-RIBOPYRANOSE

Cationic ring-opening copolymerization of 1, 4-anhydro-2, 3-O-isopropylidene-α-D-ribo-pyranose (AIRP) with 1,4-anhydro-2,3-di-O-benzyl-α-D-ribopyranose (ADBR) preparedfrom D-ribose was studied. Copolymerization using SbCl_5 or BF_3 OEt_2 as catalyst atlow temperature gave stereoregular (1→4)β-D-ribofuranan (C-1 and C-4 ring cleavagesee Scheme 1) or (1→5) α-D-ribofuranan (C-1 and C-5 ring cleavage) respectively. Theeffects of catalysts, reaction time and temperatures on yield and stereoregularity of the ob-tained polymers were studied. Polymers were characterized by molecular weight, ~1HNMR,^(13)CNMR and optical rotation.

CATIONIC POLYMERIZATION OF ISOBUTYLENE COINITIATED BY AICI_3 IN THE PRESENCE OF ETHYL BENZOATE

The cationic polymerizations of isobutylene （IB） coinitiated by AlCl3 were carried out in solvent mixture of nhexane/methylene dichloride （n-hex/CH2Cl2） of 60/40 V/V in the presence of ethyl benzoate （EB） at various temperatures range from -80℃ to -30℃. The effects of EB concentration （[EB]） and polymerization temperature on monomer conversion, weight-average molecular weight （Mw） and molecular weight distribution （MWD, Mw/Mn） of polyisobutylene （PIB） products were investigated. The rate of polymerization decreased while Mw of PIB products increased with increasing [EB]. The polymers with high molecular weight could be prepared in the presence of a suitable amount of EB. Significantly, the polymers with high Mw of 80.2 × 10^4 and 65.4 × 10^4 could be produced at -80℃ and -70℃ at [EB] = 0.24 × 10^3 mol/L respectively, which were much higher than that （Mw = 57.9 × 10^4） of PIB prepared at -100℃ in the absence ofEB. A simple but effective method for preparing the high molecular weight polyisobutylenes was developed in this work. It has been also found that the activation energy for propagation （Ep） depended on the polymerization temperature range in the presence of EB. An obvious inflection of the linear plots of lnXn versus 1/Tp occurred at the temperature range from -60℃ to -50℃ at four different concentrations of EB from 0.19 × 10^3 mol/L to 0.33× 10^3 tool/L, and thus the inflection temperature （Tinf） was in the range of -60℃ to -50℃. When [EB] was in the range of 0.24 × 10^3 mol/L to 0.33× 10^3 mol/L, Ep was determined to be around -12 kJ/mol when the polymerization was carried out at temperatures from -80℃ to Tinf and to be around -28 kJ/mol at temperatures from Tinf to -15℃ respectively.

RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE CATALYZED BY NOVEL SINGLE COMPONENT RARE EARTH CALIXARENE COMPLEXES

In this paper,ring-opening polymerization of trimethylene carbonate(TMC)with rare earth(Nd,Y,La)ρ-tert- butylcalix[n]arene(n=4,6,and 8)complexes as catalysts has been studied.Poly(trimethylene carbonate)(PTMC)with M_v of 21,400 was produced by bulk polymerization under the conditions as follows:[TMC]_0/[Nd](molar ratio)=1000,80℃, 8 h.Mechanism study reveals that the polymerization proceeds via a coordination mechanism.

Ring-opening Polymerization ofε-Caprolactone Using Lanthanide Tris(4-tert-butylphenolate)s as a Single-component Initiator

The ring-opening polymerization of e-caprolactone (CL) initiated by novel single lanthanide tris(4-tert-butylphenolate)s [Ln(OTBP)3] is reported. Single-component La(OTBP)3 can effectively prepare polycaprolactone (PCL) with over 90% yield and viscosity average molecular weight about 60 x 10 under quite mild conditions: molar ratio of CL to initiator is 1000, 60 C, 2 h in toluene. Mechanism study indicates that the monomer inserts into the growing chain via the break of acyl-oxygen bond of CL.

SYNTHESIS OF POLYISOBUTYLENE WITH SEC-ARYLAMINO TERMINAL GROUP BY COMBINATION OF CATIONIC POLYMERIZATION WITH ALKYLATION

The highly reactive polyisobutylenes(PIBs) withα-double bonds(87.5 mol%) or tert-chloro(tert-Cl) groups(95 mol%) could be prepared via the cationic polymerization of isobutylene(IB) coinitiated by BF_3 or TiCl_4 respectively.The Friedel-Crafts alkylation of diphenylamine(DPA) with the highly reactive PIB withα-double bonds was further conducted under different conditions,such as at different alkylation temperature,in the mixed solvents of CH_2Cl_2/n-hexane with different solvent polarity and at DPA concentr...

Cationic Ring Opening Polymerization of Octamethylcyclotetrasiloxane Initiated by Acid Treated Bentonite

酸开始的 octamethylcyclotetrasiloxane (D4 ) 的 Cationic 戒指开始聚合对待火山灰成胶状黏土被调查。试验性的条件根据初步的实验被选择。当在某个水平以外的激动人心的紧张没在反应率上显示出明显的效果时，更高的温度为反应过程被发现有益。聚合物被 Fourier 变换描绘红外线，质子原子磁性的回声(1H-NMR ) 和胶化浸透 chromotography。分子的集体分发的宽度被发现在 1.2 和 1.4 之间变化，它与离子的聚合在其它地方报导了的猫(】1.9 ) 的相比是非常地狭窄的。结果由于简化聚合过程和把 polysiloxane 的繁殖放在到火山灰成胶状黏土粒子的表面上一个更常规的方法的火山灰成胶状黏土粒子提供的巨大的位的阻碍者的免费质子和相反的离子的缺席被相信。可行机制被建议并且似乎被实验支持很好。另外，从结果，ω - dihydrogen 终止了准备的 polysiloxanes，在 cyclosiloxanes 的工业聚合的友好异构的催化剂被期望的使用这个潜在的环境联盟者的可能性。

RING-OPENING POLYMERIZATION OFε-CAPROLACTONE USING LANTHANIDE TRIS(N-PHENYL-3,5-DI-T-BUTYLSALICYLALDIMINATO)S AS SINGLE COMPONENT CATALYST

Ring-opening polymerization of ε-caprolactone has been carried out by using rare earth Schiff base complexes： lanthanide tris（N-phenyl-3,5-di-t-butylsalicylaldiminato）s [Ln（OPBS）3] as single component catalyst for the first time. The influences of different rare earth elements, monomer and catalyst concentration as well as reaction time on the polymerization were investigated. Mechanism studies showed that monomer inserts into the active site with the acyl-oxygen bond scission rather than the break of alkyl-oxygen bond.

SYNTHESIS, CHARACTERIZATION AND RING-OPENING POLYMERIZATION OF CYCLIC (ARYLENE PHOSPHONATE) OLIGOMERS

A series of cyclic (arylene phosphonate) oligomers were prepared by reaction of phenylphosphonic dichloride (PPD) with various bisphenols under pseudo-high dilution conditions via interfacial polycondensation. The yield of cyclic (arylene phosphonate) oligomers is over 85% by using hexadecyltrimethylammoniun bromide as phase transfer catalyst (PTC) at 0 'C . The structures of the cyclic oligomers were confirmed by a combination of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and IR analysis. These cyclic oligomers undergo facile ring-opening polymerization in the melt by using potassium 4,4'-biphenoxide as the initiator to give linear polyphosphonate. Free-radical ring-opening polymerization of cyclic(arylene phosphonate) oligomers containing sulfur linkages was also performed in the melt using 2,2'-dithiobis(benzothiazole) (DTB) as the initiator at 270 °C and the resulting polymer had a Mw, of 8 × 103 with a molecular weight distribution of 4. Ring-opening copolymerization of these cyclic oligomers with cyclic carbonate oligomers was also achieved. The average molecular weight of the resulting copolymer is higher than the corresponding homopolymer and the thermal stability of the copolymer is better than the corresponding homopolymer.

SYNTHESIS OF POLY(5,5-DIMETHYL-1,3-DIOXAN-2-ONE)BY LIPASE-CATALYZED RING-OPENING POLYMERIZATION

Porcine pancreas lipase (PPL) and PPL immobilized on narrow distributed micron-sized glass beads wereemployed successfully for the ring-opening polymerization of 5, 5-dimethyl-1, 3-dioxan-2-one (DTC) for the first time.Different polymerization conditions such as enzyme concentration and reaction temperature were studied. Immobilized PPLexhibits higher activity than native PPL. Along wth the increasing enzyme concentration, the molecular weigh of resultingPDTC decreases. PPL immobilized on narrow distributed micron-sized glass beads has outstanding recyclability. For thethird recycle time, immobilized PPL exhibits the highest catalytic activity and with high activity even after the fifth recyletime for the synthesis of PDTC. The ~1H-NMR spectra indicate that decarboxylation does not occur during the ring-openingpolymerization.

A Series of Rare Earth Phenolates Substituted by Alkyl Groups for D,L-Lactide Ring-Opening Polymerization

Single component rare earth phenolates substituted by various alkyl groups have been prepared and the correlation between the aryloxides＇ structure and catalytic activity in the ring-opening polymerization of D,L-lactide has also been investigated.The catalytic activity of all rare earth aryloxides,characteristics of the ring-opening polymerization as well as polymerization kinetics and mechanism were investigated.The results showed that both phenolates＇ catalytic activities and polymerization characteristics changed regularly,keeping in good concordance with variations in substitutents＇ number on phenol and structure of aryloxide ligands.The stronger ability of electron-donation of alkyl groups,the higher catalytic activity.Moreover,the more numbers of substituted alkyl on phenyl ring,the higher catalytic activity.The analyses of polymer ends revealed that the polymerization proceeded via a coordination-acyl-oxygen bond cleavage-insertion mechanism.

Tetrahydrosalen backboned gadolinium complex as initiator for the ring-opening polymerization of ε-caprolactone

Tetrahydrosalen ligand was employed in the synthesis of gadolinium complex. The ligand was deprotoned by LiBu, and the afforded lithium salt was reacted with anhydrous GdCl3 to produce the gadolinium complex through salt metathesis. This complex was successfully used to initiate the ring-opening polymerization of ε-caprolactone. The initiation conditions in different temperature, monomer-to-initiator ratio and time were investigated. Under the condition： [ε-caprolactone]：[catalyst] = 600, 56 ℃, toluene： 2 ml, poly（ε-caprolactone） （PCL） with Mw = 11,2782 and PDI = 1.96 was achieved.

RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE BY CALIX[8]ARENE-NEODYMIUM

Ring-opening polymerization of trimethylene carbonate (TMC) with a rare earth calixarene compound as catalyst has been studied for the first time. The effect of TMC/Nd (molar ratio) and polymerization conditions were investigated in detail. It was found that calix[8]arene-neodymium is a highly effective catalyst for the bulk polymerization of TMC and gives high molecular weight (M-v = 60,000) polymer. The optimum conditions of TMC polymerization were found to be as follows:TMC/Nd (molar ratio) = 2,000, 80 degrees C, 16 h. The polymers were characterized by NMR, GPC and DSC. Studying the mechanism by NMR showed that the polymerization of TMC catalyzed by calix[8]arene-neodymium proceeds via a cationic mechanism.

SYNTHESIS OF NOVEL BI-FUNCTIONAL COPOLYMER BEARING STERICALLY HINDERED PHENOL AND HINDERED AMINE GROUPS VIA RING-OPENING METATHESIS POLYMERIZATION

Norbornene derivatives exo,endo-2-[2-(3,5-di-tert-butyl-4-hydroxyphenoxy)-acetoxy]methyl-5-norbornene(M1) and 3,3,5,5-tetramethyl-4-piperidinyl 5-norbornene-exo,endo-2-carboxylate(M2)were synthesized and polymerized by RuCl_2(=CHPh)(PCy_3)_2 to prepare a novel kind of bi-functional polymer bearing sterically hindered phenol(SHP)and hindered amine(HLAS)groups via ring-opening metathesis polymerization(ROMP).The resulting copolymers were characterized by gel permeation chromatography(GPC),~1H-NMR and differen...

RING-OPENING POLYMERIZATION OF l,4-DIOXAN-2-ONE INITIATED BY LANTHANUM TRIS(2,6-DI-TERT-BUTYL-4-METHYLPHENOLATE)

The ring-opening polymerization of 1,4-dioxan-2-one （PDO） was carried out by lanthanum tris（2,6-di-tert-butyl-4- methylphenolate） （La（OAr）3） as novel single component initiaLor. The influences of polymerization reaction temperature and the molar ratio of monomer to initiator on the monomer conversion and molecular weight of poly（1,4-dioxan-2-one） （PPDO） were explored. PPDO with high viscosity average molecular weight of 1.95×10^5 can be prepared at 40℃ when [PDO]/ [La（OAr）3] molar ratio was 800. Mechanism investigation shows that the polymerization proceeds through a ＂coordination- insertion＂ mechanism with selective rupture of acyl-oxygen be,nd of PDO.

Mononuclear and Dinuclear Yttrium Complexes Supported by Pyrrolide Ligands： Syntheses, Structures and Catalytic Behaviors towards the Ring-opening Polymerization of ε-Caprolactone

The syntheses, structures and catalytic activities of two yttrium complexes supported by pyrrolide ligands are reported. Treatment of Y（N（Si Me3）2）3 with one equivalent of H3bptd（H3bptd = 1,9-bis（2-pyrrolyl）-2,5,8-triazanona-1,8-diene） in THF gave a complex of composition [Y（bptd）（THF）]2（1）. Reaction of Y（N（Si Me3）2）3 with one equivalent of H3tpa（H3tpa = tris（pyrrolyl-α-methyl）amine） in THF generated [Y（tpa）（THF）3]（2） in good yield. Complexes 1and 2 have been characterized by single-crystal X-ray diffraction, elemental analyses and NMR spectroscopy. Complex 1 is dinuclear. The two metal centers are doubly bridged by two amine nitrogen atoms to form a Y–N–Y–N four-membered rhombus ring. The geometries of Y^3＋ ions in 1and 2 are well described as pentagonal bipyramid and capped octahedron, respectively. The ring-opening polymerization reactions of ε-caprolactone initiated by 1 and 2, respectively, were investigated. They both exhibited good catalytic activity for the polymerization of ε-caprolactone. All of the obtained polymers have high molecular weights and relatively narrower PDIs. The polymers generated by 2 possessed polydispersity close to 1.1. The good catalytic activities of 1 and 2 reveal their potential applications in polymer industry.

Synthesis and Characterization of Star-branched Polyisobutylene by Combination of Anionic Polymerization and Cationic Polymerization

A star-shaped multifunctional styrene-isoprene copolymer was synthesized with n-BuLi as initiator, divinyl benzene as coupling agent, cyclobexane as solvent by living anionic polymerization. Using this polymer as grafting agent, a novel star-shaped branched polymer, containing several polyisobutylene, was prepared via cationic ~aolymerization. The star PS-b-PI and star-branched polyisobutylene were characterized by GPC, ＇HNMR and FT-IR, and the effects of different adding order and the amount of grafting agent were investigated.