The three-way catalysts （TWCs） promoters Ce0.6Zr0.4- x TbxO2-y were prepared by sol-gel method. BET surface areas analysis indicated that an increase of the dopant Tb content from x = 0.05 to x = 0.15 favors an incr...The three-way catalysts （TWCs） promoters Ce0.6Zr0.4- x TbxO2-y were prepared by sol-gel method. BET surface areas analysis indicated that an increase of the dopant Tb content from x = 0.05 to x = 0.15 favors an increase of surface area from 66.8 to 80.4 m^2· g^-1 compared with the undoped sample Ce0 .6oZr0.40O2 65.1 m^2·g^- 1 after calcination at 650℃. Transmission electron microscopy （TEM） observation indicated that the doped samples have a higher thermal stability. The XRD and Raman spectra confirmed that the Ce0.6Zr0.4-xTbxO2-y cubic solid solution is formed. XPS analysis revealed that Ce and Tb mainly existed in the form of Ce^4＋ and Tb^3 ＋ , and Zr existed in the form of Zr^4＋ on the surface of the samples. The doped samples were homogenous in composition ; the introduction of Tb into the CeO2-ZrO2 promoters resuited in the formation of a solid solution, and the concentration of surface lattice oxygen was increased.展开更多
The three way catalysts (TWCs) promoters (Ce Zr)O 2, (Pr Ce Zr)O 2 and (Pr Zr)O 2 were prepared by sol gel like method. They were characterized by XRD, EXAFS and BET surface area determination. The reduction ...The three way catalysts (TWCs) promoters (Ce Zr)O 2, (Pr Ce Zr)O 2 and (Pr Zr)O 2 were prepared by sol gel like method. They were characterized by XRD, EXAFS and BET surface area determination. The reduction features of the promoters were measured by temperature programmed reduction (TPR) of H 2 to access the potential for the promoters containing praseodymia as oxygen storage component in three way catalyst. The (Pr Zr)O 2 cubic solid solution is formed at high temperature up to 800 ℃, which makes it more reducible than the (Ce Zr)O 2 solid solution. For the (Pr Ce Zr)O 2 samples, the ternary solid solution plays an important role in the reduction process. The performance of the three way catalysts with fully formulated Pt, Pd and Rh is proceeded by using both light off temperature under a stoichiometric gas composition and the conversion of CO, C 3H 6 and NO under changing air/fuel ratio at a constant reaction temperature 400 ℃ . The results indicate that a small amount of praseodymia doping into (Ce Zr)O 2 favors the light off temperature of C 3H 6 and NO, and all the catalysts containing praseodymia obviously exhibits enhanced width of S value for NO conversion at lean region ( S ≥1.00).展开更多
Ce Zr O solid solution was prepared by four different methods, i.e., decomposition of nitrate, coprecipiation, hydroxysuainic acid sol gel as well as citrate sol gel, and characterized by using X ray powder diffr...Ce Zr O solid solution was prepared by four different methods, i.e., decomposition of nitrate, coprecipiation, hydroxysuainic acid sol gel as well as citrate sol gel, and characterized by using X ray powder diffraction, Raman and temperature programmed reduction. The phase composition and the reduction properties of Ce Zr O depend on the preparation method. A cubic Ce 0.5 Zr 0.5 O 2 solid solution can be obtained by using the sol gel method. The Ce Zr O solid solution prepared by using decomposition or coprecipiation was composed of cubic Ce 0.8 Zr 0.2 O 2 and tetragonal Ce 0.2 Zr 0.8 O 2 solid solution. The Ce Zr O solid solution prepared with different methods shows the different reduction properties owing to different phase composition. Results of differential thermal analysis and XRD show that Ce 0.5 Zr 0.5 O 2 solid solution is formed during the decomposition or combustion of the gel.展开更多
A series of Ceo.sFeo.30Zr0.20O2 catalysts were prepared by different methods （co-precipitations method, citric acid sol-gel method, impregnation method, physical mixed method, and hydrotherrnal method） and character...A series of Ceo.sFeo.30Zr0.20O2 catalysts were prepared by different methods （co-precipitations method, citric acid sol-gel method, impregnation method, physical mixed method, and hydrotherrnal method） and characterized by X-ray diffraction （XRD）, Raman spectroscopy, Brunauer-Emmett-Teller （BET） and H2-TPR measurements. Potential of the catalysts in the soot oxidation was evaluated in a temperature-programmed oxidation （TPO） apparatus. The results showed that all the Fe3＋ and Zr4＋ were incor- porated into ceria lattice to form a pure Ce-Fe-Zr-O solid solution for the co-precipitation sample, but two kinds of Fe phases ex- isted in the Ce-Fe-Zr-O catalysts prepared by other methods： Fe3＋ incorporated into CeO2 lattice and dispersed Fe2O3 clusters. The free Fe2O3 clusters could improve the activity of catalysts for soot oxidation comparing with the pure Ce-Fe-Zr-O solid solution owing to the synergetic effect between free Fe2O3 and surface oxygen vacancies. In addition, the activity of catalysts strongly relied on the surface reducibility of free Fe2O3 particles. Holding both abundant free Fe2O3 particles and high oxygen vacancy concentration, the hydrothermal Ce0.5Fe0.3Zr0.202 catalyst presented the lowest Ti （251℃, ignition temperature of soot oxidation） and Tm （310 ℃, maximum oxidation rate temperature） for soot combustion （with tight-contact between soot and catalysts） among the five samples. Even after aging at 800 ℃ for 10 h, the Ti and Tm were still relatively low, at 273 and 361 ℃, respectively, indicating high catalytic stability.展开更多
Ce-Cu-O monolithic catalysts were prepared by using Ce0.9Cu0.1O1.9 solid solution or nitrate as precursors,and their catalytic performance for the combustion of ethyl acetate were studied.The catalysts calcined at a l...Ce-Cu-O monolithic catalysts were prepared by using Ce0.9Cu0.1O1.9 solid solution or nitrate as precursors,and their catalytic performance for the combustion of ethyl acetate were studied.The catalysts calcined at a low temperature showed high catalytic activities.When calcined at high temperatures,the catalyst with Ce0.9Cu0.1O1.9 solid solution as precursor remained a high activity,while the catalyst with metal nitrates as precursors exhibited a suppressed reactivity.Therefore,the catalyst prepared with th...展开更多
基金Project supported by the Natural Science Basic Research Plan in Shaanxi Province of China (2004B13)
文摘The three-way catalysts （TWCs） promoters Ce0.6Zr0.4- x TbxO2-y were prepared by sol-gel method. BET surface areas analysis indicated that an increase of the dopant Tb content from x = 0.05 to x = 0.15 favors an increase of surface area from 66.8 to 80.4 m^2· g^-1 compared with the undoped sample Ce0 .6oZr0.40O2 65.1 m^2·g^- 1 after calcination at 650℃. Transmission electron microscopy （TEM） observation indicated that the doped samples have a higher thermal stability. The XRD and Raman spectra confirmed that the Ce0.6Zr0.4-xTbxO2-y cubic solid solution is formed. XPS analysis revealed that Ce and Tb mainly existed in the form of Ce^4＋ and Tb^3 ＋ , and Zr existed in the form of Zr^4＋ on the surface of the samples. The doped samples were homogenous in composition ; the introduction of Tb into the CeO2-ZrO2 promoters resuited in the formation of a solid solution, and the concentration of surface lattice oxygen was increased.
文摘The three way catalysts (TWCs) promoters (Ce Zr)O 2, (Pr Ce Zr)O 2 and (Pr Zr)O 2 were prepared by sol gel like method. They were characterized by XRD, EXAFS and BET surface area determination. The reduction features of the promoters were measured by temperature programmed reduction (TPR) of H 2 to access the potential for the promoters containing praseodymia as oxygen storage component in three way catalyst. The (Pr Zr)O 2 cubic solid solution is formed at high temperature up to 800 ℃, which makes it more reducible than the (Ce Zr)O 2 solid solution. For the (Pr Ce Zr)O 2 samples, the ternary solid solution plays an important role in the reduction process. The performance of the three way catalysts with fully formulated Pt, Pd and Rh is proceeded by using both light off temperature under a stoichiometric gas composition and the conversion of CO, C 3H 6 and NO under changing air/fuel ratio at a constant reaction temperature 400 ℃ . The results indicate that a small amount of praseodymia doping into (Ce Zr)O 2 favors the light off temperature of C 3H 6 and NO, and all the catalysts containing praseodymia obviously exhibits enhanced width of S value for NO conversion at lean region ( S ≥1.00).
文摘Ce Zr O solid solution was prepared by four different methods, i.e., decomposition of nitrate, coprecipiation, hydroxysuainic acid sol gel as well as citrate sol gel, and characterized by using X ray powder diffraction, Raman and temperature programmed reduction. The phase composition and the reduction properties of Ce Zr O depend on the preparation method. A cubic Ce 0.5 Zr 0.5 O 2 solid solution can be obtained by using the sol gel method. The Ce Zr O solid solution prepared by using decomposition or coprecipiation was composed of cubic Ce 0.8 Zr 0.2 O 2 and tetragonal Ce 0.2 Zr 0.8 O 2 solid solution. The Ce Zr O solid solution prepared with different methods shows the different reduction properties owing to different phase composition. Results of differential thermal analysis and XRD show that Ce 0.5 Zr 0.5 O 2 solid solution is formed during the decomposition or combustion of the gel.
基金Project supported by National Natural Science Foundation of China(51374004,51204083,51174105,51104074)Natural Science Foundation of Yunnan Province(2010ZC018)
文摘A series of Ceo.sFeo.30Zr0.20O2 catalysts were prepared by different methods （co-precipitations method, citric acid sol-gel method, impregnation method, physical mixed method, and hydrotherrnal method） and characterized by X-ray diffraction （XRD）, Raman spectroscopy, Brunauer-Emmett-Teller （BET） and H2-TPR measurements. Potential of the catalysts in the soot oxidation was evaluated in a temperature-programmed oxidation （TPO） apparatus. The results showed that all the Fe3＋ and Zr4＋ were incor- porated into ceria lattice to form a pure Ce-Fe-Zr-O solid solution for the co-precipitation sample, but two kinds of Fe phases ex- isted in the Ce-Fe-Zr-O catalysts prepared by other methods： Fe3＋ incorporated into CeO2 lattice and dispersed Fe2O3 clusters. The free Fe2O3 clusters could improve the activity of catalysts for soot oxidation comparing with the pure Ce-Fe-Zr-O solid solution owing to the synergetic effect between free Fe2O3 and surface oxygen vacancies. In addition, the activity of catalysts strongly relied on the surface reducibility of free Fe2O3 particles. Holding both abundant free Fe2O3 particles and high oxygen vacancy concentration, the hydrothermal Ce0.5Fe0.3Zr0.202 catalyst presented the lowest Ti （251℃, ignition temperature of soot oxidation） and Tm （310 ℃, maximum oxidation rate temperature） for soot combustion （with tight-contact between soot and catalysts） among the five samples. Even after aging at 800 ℃ for 10 h, the Ti and Tm were still relatively low, at 273 and 361 ℃, respectively, indicating high catalytic stability.
基金supported by the Plan Project of Science and Technology in Zhejiang Province of China (2008C21020)
文摘Ce-Cu-O monolithic catalysts were prepared by using Ce0.9Cu0.1O1.9 solid solution or nitrate as precursors,and their catalytic performance for the combustion of ethyl acetate were studied.The catalysts calcined at a low temperature showed high catalytic activities.When calcined at high temperatures,the catalyst with Ce0.9Cu0.1O1.9 solid solution as precursor remained a high activity,while the catalyst with metal nitrates as precursors exhibited a suppressed reactivity.Therefore,the catalyst prepared with th...
