Research progress of permanent ferrite magnet materials

Permanent ferrite magnet materials are extensively employed due to their exceptional magnetic properties and cost-effectiveness.The fast development in electromobile and household appliance industries contributes to a new progress in permanent ferrite materials.This paper reviews the deveolpement and progress of permanent ferrite magnet industry in recent years.The emergence of new raw material,the advancement of perparation methods and manufacturing techniques,and the potential applications of permanent ferrite materials are introduced and discussed.Specifically,nanocrystallization plays a crucial role in achieving high performance at a low cost and reducing reliance on rare earth resources,and therefore it could be a promising development trendency.

Recent progress in high temperature permanent magnetic materials

Permanent magnetic materials capable of operating at high temperature up to 500℃ have wide potential applications in fields such as aeronautics, space, and electronic cars. SmCo alloys are candidates for high temperature applications, since they have large magnetocrystalline anisotropy field （6-30 T）, high Curie temperature （720-920℃）, and large energy product （〉200 kJ.m-3） at room temperature. However, the highest service temperature of commercial 2：17 type SmCo magnets is only 300℃, and many efforts have been devoted to develop novel high temperature permanent magnets. This review focuses on the development of three kinds of SmCo based magnets： 2：17 type SmCo magnets, nanocrystalline SmCo magnets, and nanocomposite SmCo magnets. The oxidation protection, including alloying and surface modification, of high temperature permanent magnets is discussed as well.

A simple permanent deformation model of rockfill materials

Existing experimental results have shown that using a semi-log linear relationship between the permanent volumetric strain and cyclic number underestimates the volumetric deformation of rockfill materials with a large cyclic number, and that the error increases with the confining pressure. The existing permanent deformation models are not suitable for the seismic safety analysis of high dams during strong earthquakes. In this study, a series of large-scale triaxial cyclic loading tests of rockfill materials were performed, and a new permanent deformation model of rockfill materials was developed and validated with three kinds of rockfill materials. The results show that the proposed model can properly reflect the general features of the permanent deformation of rockfill materials. The main features of the model are as follows:(1) relations between the cyclic number and permanent volumetric/shear strain are described by hyperbolic functions, which can avoid underestimating the volumetric deformation occurring during strong earthquakes;(2) the model can capture the effect of the mean effective stress on the permanent volumetric strain, with greater confining pressure correlating to greater permanent volumetric deformation, and the permanent volumetric strain under low confining pressure near the dam crest can be well represented; and(3) the model can reflect the effect of the consolidation stress ratio on the permanent shear strain.

New shakedown criterion and permanent deformation properties of unbound granular materials

Unbound granular material specifications for road pavements in Australia are primarily based on physical material specification rather than mechanical characterisation. This simplified approach does not reflect the actual material performance under repeated dynamic traffic loads. There is a little information available on the influence of the local crushed rock properties and compacted layer properties on permanent deformation (PD). This study aims to characterise the local unbound granular materials in Victoria according to their PD behaviour under repeated loads and to develop a suitable shakedown criterion that could describe the PD of the tested materials to simplify the flexible pavement design. Repeated-load triaxial tests were conducted over several samples with a range of moisture contents, gradations, densities, and stress conditions. The laboratory test results showed that PD behaviour was influenced by several factors. In addition, the tested subbase-specified unbound granular materials reflect high PD resistance that is almost equivalent to basequality unbound granular materials. This may indicate that current requirements for the subbase-quality unbound granular materials are over-prescribe. Moreover, as the existing shakedown criterion was not applicable for the multi-stage repeated-load triaxial test and the local tested materials, a new shakedown criterion and new boundaries are proposed based on the PD behaviour. In the proposed criterion, the shakedown ranges are identified based on the curve angle of the PD vs. logarithm of the number of loading cycles, and this new criterion was validated using several materials from existing literature. The local tested base and subbase materials can be assigned as Range A when PD\1%, Range B when 1%\PD\3%, and Range C when PD[3%. The proposed criterion could provide a useful and quick approach to assess the PD of the unbound granular materials with both single and multistages of stresses.

Neural network-based model for prediction of permanent deformation of unbound granular materials

Several available mechanistic-empirical pavement design methods fail to include predictive model for permanent deformation(PD)of unbound granular materials(UGMs),which make these methods more conservative.In addition,there are limited regression models capable of predicting the PD under multistress levels,and these models have regression limitations and generally fail to cover the complexity of UGM behaviour.Recent researches are focused on using new methods of computational intelligence systems to address the problems,such as artificial neural network(ANN).In this context,we aim to develop an artificial neural model to predict the PD of UGMs exposed to repeated loads.Extensive repeated load triaxial tests(RLTTs)were conducted on base and subbase materials locally available in Victoria,Australia to investigate the PD properties of the tested materials and to prepare the database of the neural networks.Specimens were prepared over different moisture contents and gradations to cover a wide testing matrix.The ANN model consists of one input layer with five neurons,one hidden layer with twelve neurons,and one output layer with one neuron.The five inputs were the number of load cycles,deviatoric stress,moisture content,coefficient of uniformity,and coefficient of curvature.The sensitivity analysis showed that the most important indicator that impacts PD is the number of load cycles with influence factor of 41%.It shows that the ANN method is rapid and efficient to predict the PD,which could be implemented in the Austroads pavement design method.

The Production Management Improvement Model of Small and Medium-sized Permanent Magnetic Materials Manufacturing Companies

An integrated production planning and control model based on MRPⅡand JIT is put forward through analyzing the characteristics of magnetic materials manufacturing companies. Master Production Schedule with limited capacity and operational plan in workshop level based on the basic data of flow chart are formulated by this model which applied JIT idea and based on customer order demand. Push production is adapted during execution phase combined with process flow cards. The model is helpful to reduce inventory,keep certain flexbility of production and improve continuity and equilibrium of manufacturing process.

Design and Performance Analysis of Permanent Magnet Claw Pole Machine with Hybrid Cores

Permanent magnet claw pole machine(PMCPM) is a special kind of transverse flux permanent magnet machine. Compared with other electrical machines, it has the advantages of high torque density and high efficiency for high speed operation. However, because of its complex irregular structure, the manufacturing process using silicon sheets is complicated. Soft magnetic composite material(SMC) is manufactured by powder metallurgy technology, which can produce various shapes of stator core structures, so it is easier to produce various irregular shapes of the stator core. However, the raw SMC material is relatively expensive, and the mechanical strength of SMC is weak. In this paper, a PMCPM with hybrid cores is proposed. With the adoption of hybrid silicon sheet-SMC cores and amorphous alloy-SMC cores, the torque ability of PMCPM can be improved greatly and it can have higher efficiency for more wide operation frequency. Meanwhile, its mechanical strength has been improved and it can be designed for high torque direct drive applications as it is a modular machine. Furthermore, three methods are proposed to reduce the additional eddy current loss which resulted from the employment of hybrid cores in PMCPM.

An Empirical Study of CAPM’s Applicability to Rare Earth Permanent Magnet Material Stocks

China has the world’s largest reserves of rare earth elements.Rare earth permanent magnet material has always been one of the popular industries in the investment market.CAPM is the basic asset-pricing model in financial economics.There are a number of studies conducted to examine the applicability of CAPM to stock markets in different industries and to investigate the modification method to improve the model’s prediction accuracy.In this study,seven leading enterprises in China’s rare earth permanent magnet material industry listed on the A-share market were selected as the research subjects.Based on CAPM,regression analysis was conducted on the monthly data from March 2016 to February 2022.The results demonstrated that using the β coefficient to explain the risk of China’s rare earth permanent magnet industry is ineffective.The ultimate benefit was less affected by market indexes but mainly by non-systematic risks.CAPM has low applicability to China’s rare earth permanent magnet material industry and requires further improvement.Nevertheless,CAPM still has some guiding significance in making enterprise comparisons and investment decisions.

Effect of vertical stress rest period on deformation behaviour of unbound granular materials:Experimental and numerical investigations

Repeated load triaxial test is used to assess the deformation behaviour of unbound granular materials(UGMs) in flexible road pavements. Repeated load pulse characteristics(i.e. shape, loading period and rest period) are the stress configurations used in the experimental set-up to simulate the passing axle loads. Some researchers and standard testing protocols suggest a rest period of varying durations after a loading phase. A thorough review of existing literature and practises has revealed that there is no agreement about the effect of the rest period of vertical stress pulse on the deformation behaviour of the UGMs. Therefore,the main objective of this study is to investigate the effect of repeated stress rest period on the deformation behaviour of UGMs experimentally. Experiments are conducted, both with and without rest period, using basalt and granite crushed rocks from Victoria, Australia. Furthermore, in order to gain insight into the effect of the rest period, finite element modelling is also developed. Both the experimental and modelling results show that the rest period has a noticeable effect on both resilient and permanent deformation behaviours of UGMs. It is, therefore, recommended to take extra precautions while adopting a particular standard testing protocol and to supplement the results by additional tests with different loading configurations.

A Study of Two-Phase Nanocrystalline Nd_(8.5)Fe_(75)Co_5Cu_1Zr_3Nb_1B_(6.5)Permanent Magnet

Nanocrystalline Nd 8.5 Fe 75 Co 5Cu 1Zr 3Nb 1B 6.5 ribbons were prepared by melt spun (18 m·s -1 ) and subsequent heat treatment (670 ℃/4 min). Excellent magnetic properties of the bonded magnet were achieved as follows: B r=0.68 T (6 8 kGs), J H c=620.3 kA·m -1 (7.8 kOe), ( BH ) max =74 kJ·m -3 (9 3 MGOe). The results of TEM photomicrographs confirm that the appearance of α Fe phase is earlier than that of Nd 2Fe 14 B phase during crystallization process. The addition of Cu and Zr elements shows to be advantageous to the improvement of an intrinsic coercivity and squareness of hysteresis loop, as well as energy product.

Development of Strip Casting Technology in Rare Earth Permanent Magnet Alloys and Hydrogen Storage Alloys in China

The SC technique is now being applied widely in material preparation, especially in rare earth functional materials in virtue of its advanced process and high performance product. The applications of SC technique in rare earth permanent magnet alloys and hydrogen storage alloys were analyzed integrative, on the basis of summary of SC technique development in this paper. The paper mainly includes development history of SC technology, effect of SC technology on alloy microstructure, application of SC technology in RE storage hydrogen alloy and sintered Nd-Fe-B alloy, development of SC equipment and SC product industry. At the same time, the paper points out the existing problem of SC products.

Mn-based permanent magnets

Mn-based intermetallic compounds have attracted much attention due to their fascinating structural and physical properties,especially their interesting hard magnetic properties.In this paper,we have summarized the magnetic and structural properties of Mn-based intermetallic compounds(Mn X,where X=Al,Bi,and Ga).Various methods for synthesizing single phases of MnAl,MnBi,and Mnx Ga were developed in our lab.A very high saturation magnetization of 125 emu/g,coercivity of 5 kOe,and maximum energy product(BH)_(max)of 3.1 MG·Oe were achieved at room temperature for the pureτ-Mn–Al magnetic phase without carbon doping and the extrusion process.Low temperature phase(LTP)MnBi with a purity above 95 wt.%can be synthesized.An abnormal temperature coefficient of the coercivity was observed for the LTP MnBi magnet.Its coercivity increased with temperature from 100 K to 540 K,reached a maximum of 2.5 T at about540 K,and then decreased slowly to 1.8 T at 610 K.The positive temperature coefficient of the coercivity is related to the evolution of the structure and magnetocrystalline anisotropy field of the LTP MnBi phase with temperature.The LTP MnBi bonded magnets show maximum energy products(BH)_(max)of 8.9 MG·Oe(70 kJ/m^(3))and 5.0 MG·Oe(40 k J/m^(3))at room temperature and 400 K,respectively.Ferrimagnetic Mn_(x)Ga phases with L10 structures(x〈2.0)and D0_(22)structures(x〉2.0)were obtained.All of the above structures can be described by a D0_(22)supercell model in which 2 a-Ga and 2 b-Mn are simultaneously substituted.The tetragonal D0_(22)phases of the Mn_(x)Ga show high coercivities ranging from 7.2 kOe for low Mn content x=1.8 to 18.2 kOe for high Mn content x=3 at room temperature.The Mn_(1.2)Ga sample exhibits a room temperature magnetization value of 80 emu/g.The hard magnetic properties of coercivityiH_(c)=3.5 kOe,remanence M_(r)=43.6 emu/g,and(BH)_(max)=2.5 MG·Oe were obtained at room temperature.Based on the above studies,we believe that Mn-based magnetic materials could be promising candidates for rare earth free permanent magnets exhibiting a high Curie temperature,high magnetocrystalline anisotropy,and very high coercivity.

MTA与iRoot BP Plus行直接盖髓术治疗龋源性露髓恒磨牙临床疗效分析

目的:观察成熟恒磨牙去龋未净时露髓使用无机三氧化物聚合体(Mineral trioxide aggregate,MTA)和生物陶瓷类材料(iRoot BP Plus)行直接盖髓术的临床疗效,探讨此类术式的可行性及其影响因素,比较两种盖髓剂疗效的差异。方法:选取2018年4月-2019年10月就诊于笔者科室符合纳入标准的53例患者,共53颗患牙,随机分为M组和B组,分别使用MTA与iRoot BP Plus行直接盖髓术,术后定期复查,比较两组的临床疗效。结果:共计45例患者(45颗患牙)完成2年随访,总体成功率84.4%;M组和B组分别为85.7%、83.3%,两组比较差异无统计学意义(P>0.05)。性别、年龄、露髓孔大小等因素对疗效均无显著影响(P>0.05)。结论:成熟恒磨牙术中露髓时使用MTA或iRoot BP Plus行直接盖髓术均可获得良好疗效;相较于性别、年龄、露髓孔大小等因素,如何简单准确评判牙髓状态及避免龈下微渗漏更加值得关注。

轴向磁力轴承结构综述

按照悬浮力的产生方式将轴向磁力轴承分为主动型、被动型和混合型,主动型的优点是能够产生可控电磁力,被动型的优点是结构简单,混合型兼顾了主动型和被动型的特点。在研究同心单环结构的基础上,分析了具备冗余性的同心多环冗余结构及叠片式冗余结构,从电磁力角度看,整体式同心双环结构优于同心三环结构,叠片式六环结构优于叠片式四环结构和叠片式八环结构。最后,对轴向磁力轴承在结构、控制及工业应用方面的发展前景进行了展望,轴向磁力轴承的结构应当朝着更具备冗余性和重构能力的方向优化。

潜液式液化天然气泵用低温永磁同步电机研究现状综述

低温永磁同步电机具有高效率、高功率密度和运行稳定的优点,正在逐步替代低温感应电机,成为液化天然气泵用低温电机未来的发展趋势,但仍有一些关键技术问题有待解决。该文首先详细阐述了低温环境下永磁同步电机关键材料的电磁特性和机械特性的变化规律,明确了不同材料的选取原则。在此基础上,重点总结了低温永磁同步电机的设计方法、拓扑结构、多物理场耦合分析及控制策略等关键技术。然后,介绍了现有低温电机的制造工艺与测试方法,指出当前低温电机测试所面临的挑战和不足。最后,探讨了低温永磁同步电机领域亟待解决的关键技术问题,并对低温永磁同步电机的研究方向和发展趋势进行了展望。

高性能烧结NdFeB永磁材料市场发展与低成本技术途径

烧结NdFeB永磁材料以其优异的磁性能在各领域获得了广泛应用。首先概括了烧结NdFeB永磁材料的应用领域,然后简要介绍了材料的生产工艺流程。在此基础上,重点阐述了烧结NdFeB永磁材料高性能化和低成本化的重要技术途径——重稀土晶界扩散工艺,详细介绍了各类晶界扩散方法及其优缺点。最后展望了高性能烧结NdFeB永磁市场发展趋势。

Comparative study between Embosphere®and Marine gel®as embolic agents for chemoembolization of hepatocellular carcinoma

BACKGROUND While gelatin sponge particles and calibrated microspheres are commonly used as embolic materials in conventional transarterial chemoembolization(cTACE),direct comparisons between these embolic agents are rare.AIM To compare the efficacy and safety of superselective cTACE using Embosphere®or Marine gel®in patients with early-stage hepatocellular carcinoma(HCC).METHODS This retrospective study included 70 patients with small(<4 cm)HCC who underwent cTACE with Embosphere®(n=33)or Marine gel®(n=37)as the embolic agent at a single center between March 2021 and July 2022.The radiologic images and clinical data were retrospectively reviewed,with an emphasis on tumor response,procedure-related complications,and local tumor recurrence.The primary index tumor was assessed on a 1-mo follow-up image,and local progression-free survival was obtained using the Kaplan-Meier method and was compared by the log-rank test.RESULTS The median tumor size of both groups was 1.5 cm,and 69 patients achieved a complete response one month after cTACE.The cumulative local recurrence rate at 12 mo was 15.5%in the Embosphere®group and 14.4%in the Marine gel®group.The local progression-free survival was not significantly different between the two groups(P=0.83).In the multivariate analysis,high serum alphafetoprotein was the only significant poor prognostic factor for local tumor progression(P=0.01).Postembolization syndrome occurred in 36.4%of the Embosphere®group and 35.1%of the Marine gel®group,and there were no cases of biloma,biliary duct dilation,or liver abscess in either group.CONCLUSION Calibrated gelatin sponge particles(Marine gel®)and calibrated microspheres(Embosphere®)have similar outcomes in terms of tumor response for superselective cTACE of small HCC.

稀土永磁同步电机的轻量化技术分析

阐述稀土永磁同步电机的优点,它是一种采用稀土永磁材料作为励磁的同步电机,具有无滑差、高效率、高功率因数等。探讨稀土永磁同步电机的拓扑结构设计和优化、稀土永磁同步电机机壳以及支撑架的结构优化。介绍稀土永磁同步电机集成化的特点。

烧结工艺对2:17型SmCo合金磁性能的影响探究

采用传统粉末冶金工艺制备了2∶17型SmCo合金,研究了烧结温度1195~1210℃对磁体微观结构和磁性能的影响。烧结态磁体主要由2∶17H相和1∶5H相组成。随烧结温度的升高,相组成不变,而晶粒平均粒径由43.51μm生长至75.71μm。从1195℃提升至1210℃的过程中,剩磁B_(r)、内禀矫顽力H_(cj)、最大磁能积(BH)_(max)和密度ρ均随温度的升高先增大后减小,并在1200℃时得到了B_(r)=11.12 kGs、ρ=8.2747 g/cm^(3)的最佳烧结态磁体,同时磁体内铜元素分布相对均匀,磁体获得高磁性能。对比终态磁性能,发现剩磁B_(r)和密度ρ的提升主要完成于烧结阶段。

考虑材料非线性特性的永磁电机电磁场动网格有限元快速计算

电机电磁场有限元建模需要充分考虑材料非线性特性以及转子运动特性,这使得电机电磁场有限元模型在保证计算精度和提高计算速度方面面临新的挑战。以一台36槽6极内置式永磁同步电机为例,结合一阶网格剖分单元构建其电磁场有限元计算模型;采用Dirichlet和周期边界条件降低求解维度,运用牛顿迭代法考虑非线性材料特性,并结合Moving Band动网格技术对转子运动进行精确建模;其中Moving Band动网格和周期边界条件的联合运用能够有效保证求解矩阵维度的恒定,有利于在不同转子位置处继承上一步求解的磁矢位,为牛顿迭代提供有效初始解,实现加快牛顿迭代速度。通过对比提出的快速算法和传统有限元算法所计算的结果,验证了算法的准确性和快速性。