A series of Ce-doped MnOx/TiO2 catalysts were prepared by impregnation method and used for catalytic oxidation of NO in the presence of excess O2. The sample with the Ce doping concentration of Ce/Mn=l/3 and calcined ...A series of Ce-doped MnOx/TiO2 catalysts were prepared by impregnation method and used for catalytic oxidation of NO in the presence of excess O2. The sample with the Ce doping concentration of Ce/Mn=l/3 and calcined at 300 ℃ shows a superior activity for NO oxidation to NO2. On Ce（1）Mn（3）Ti catalyst, 58% NO conversion was obtained at 200 ℃ and 85% NO conversion at 250 ℃ with a GHSV of 41000 h-1, which was much higher than that over MnOx/TiO2 catalyst （48% at 250 ℃）. Characterization results implied that the higher activity of Ce（1）Mn（3）Ti could be attributed to the enrichment of well-dispersed MnO2 on the surface and the abundance of Mn3＋ and Zi3＋ species. The addition of Ce into MnO2/TiO2 could improve oxygen storage capacity and facilitate oxygen mobility of the catalyst as shown by PL and ESR, so that its activity for NO oxidation could be enhanced. The effect of H2O and SO2 on the catalyst activity was also investigated.展开更多
Ce-doped titanium oxide nanoparticles were investigated in the paper. The surface structures of undoped and Ce-doped TiO2 nanoparticles were observed by scanning tunneling microscopy （STM）. The experimental results ...Ce-doped titanium oxide nanoparticles were investigated in the paper. The surface structures of undoped and Ce-doped TiO2 nanoparticles were observed by scanning tunneling microscopy （STM）. The experimental results of scanning tunneling spectroscopy （STS） show that the surface electronic structures of TiO2 nanoparticles are modified by introducing new electronic states in the surface band gap through cerium ion doping. The results are discussed in terms of the influence of doping concentration on the surface band gap of TiO2.展开更多
A flower-like SnO_(2)–SnO/porous Ga N(FSS/PGaN) heterojunction was fabricated for the first time via a facile spraying process, and the whole process also involved hydrothermal preparation of FSS and electrochemical ...A flower-like SnO_(2)–SnO/porous Ga N(FSS/PGaN) heterojunction was fabricated for the first time via a facile spraying process, and the whole process also involved hydrothermal preparation of FSS and electrochemical wet etching of GaN,and SnO_(2)–SnO composites with p–n junctions were loaded onto PGaN surface directly applied to H_(2)S sensor. Meanwhile,the excellent transport capability of heterojunction between FSS and PGaN facilitates electron transfer, that is, a response time as short as 65 s and a release time up to 27 s can be achieved merely at 150℃ under 50 ppm H_(2)S concentration, which has laid a reasonable theoretical and experimental foundation for the subsequent PGaN-based heterojunction gas sensor.The lowering working temperature and high sensitivity(23.5 at 200 ppm H2S) are attributed to the structure of PGaN itself and the heterojunction between SnO_(2)–SnO and PGaN. In addition, the as-obtained sensor showed ultra-high test stability.The simple design strategy of FSS/PGaN-based H_(2)S sensor highlights its potential in various applications.展开更多
All-solid-state electrolytes are exceedingly attractive because of the outstanding inherent safety and energy density compared to liquid electrolytes.Whereas,it is still formidable to simultaneously design solid elect...All-solid-state electrolytes are exceedingly attractive because of the outstanding inherent safety and energy density compared to liquid electrolytes.Whereas,it is still formidable to simultaneously design solid electrolytes with favorable electrode/electrolyte interface compatibility and high ionic conductivity in a simple and scalable manner.Hence,the oxygen-vacancy-rich Gd-doped SnO_(2) nanotubes(GDS NTs)are innovatively prepared and applied to the electrolyte of all-solid-state lithium metal batteries for the first time.The addition of GDS NTs can validly construct long-range co ntinuous ion transport networks in the poly(ethylene oxide)(PEO)-based system and greatly improve the mechanical properties of the electrolyte.Compared to the PEO-based electrolyte,the composite electrolyte displays a higher lithium ion conductivity of 2.41×10^(-4) S cm^(-1) at 30℃,a higher lithium ion transference number up to 0.62 and a wider electrochemical window of 5 V at 50℃.In addition,the composite electrolyte manifests outstanding compatibility with high-voltage LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811)cathode,LiFePO4 cathode and lithium metal anode.The assembled Li/Li symmetric battery exhibits stable Li plating/stripping cycling performance,which can cycle steadily for 1500 h at a capacity of 0.3 mA h cm^(-2).And Li/LiFePO4 battery still maintains a high capacity of 131.54 mA h g^(-1) at 0.5C after 800 cycles,which has a superior capacity retention rate of 93.2%.The obtained novel composite electrolyte has promising application prospects in the field of all-solid-state lithium metal cells.展开更多
Nanocrystalline SnO<sub>2</sub> and CuO doped with SnO<sub>2</sub> were prepared by the co-precipitation method and characterized for different physiochemical properties and microbiological act...Nanocrystalline SnO<sub>2</sub> and CuO doped with SnO<sub>2</sub> were prepared by the co-precipitation method and characterized for different physiochemical properties and microbiological activity. The composition and morphological formation were characterized by XRD, HRTEM, Raman, FTIR, and UV-vis spectroscopy. The Powder X-ray analysis reveals that Sn4+ ions have substituted the Cu<sup>2+</sup> ions without changing the monoclinic structure of SnO<sub>2</sub> but the average particle size of the SnO<sub>2</sub> and CuO doped SnO<sub>2</sub> samples from 11 and 5 nm respectively. However, it exhibits an inhibiting strong bacterial growth against tested bacterial strains.展开更多
Ce-doped Bi2O3 nanopowders were prepared by reverse titration chemical coprecipitation from Bi^3＋and Ce^（4＋）containing aqueous solution.Techniques of X-ray diffraction（XRD）,transmission electron microscopic（TEM...Ce-doped Bi2O3 nanopowders were prepared by reverse titration chemical coprecipitation from Bi^3＋and Ce^（4＋）containing aqueous solution.Techniques of X-ray diffraction（XRD）,transmission electron microscopic（TEM）and Fourier transform infrared spectroscopy（FTIR）were employed to characterize the as-synthesized materials.The XRD patterns indicated that the peaks can be easily indexed toβ-Bi2O3 and no diffraction peaks of Ce or other impurity phases were detected in the prepared samples.The calculated average crystalline size decreased from 31.72 to 11.96 nm when the Ce content increased from 1 wt%to 10 wt%.The morphology changed from flake-like into the spherical-like with increase in Ce content.The electric conductivity of Ce-doped Bi2O3 electrolyte was also investigated by two probe DC method.Conductivity analysis exhibited that the rate of conductivity increased with increasing Ce^2＋ratio,when the Ce concentration was up to 5 wt%,the as-synthesized Ce-doped Bi2O3 electrolyte showed the maximum value of conductivity（0.295 S？cm^（–1））.展开更多
以 Sn Cl4· Ti( OBu) 4、氨水、乙醇为原料 ,采用活性层包覆法 ,制备出 Ti O2 / Sn O2 复合光催化剂 ,并用IR、XRD、TEM和 BET等手段对样品进行了表征 .研究其对有机磷农药敌敌畏的光催化降解效果 ,与单一半导体催化剂 Sn O2 、Ti ...以 Sn Cl4· Ti( OBu) 4、氨水、乙醇为原料 ,采用活性层包覆法 ,制备出 Ti O2 / Sn O2 复合光催化剂 ,并用IR、XRD、TEM和 BET等手段对样品进行了表征 .研究其对有机磷农药敌敌畏的光催化降解效果 ,与单一半导体催化剂 Sn O2 、Ti O2 做了简单对比 .结果表明 :所制 Ti O2 / Sn O2 样品为包覆型结构 ,由锐钛矿型 Ti O2 金红石型 Sn O2 组成 ,与 Sn O2 及 Ti O2 晶体粉末相比所制 Ti O2 / Sn O2 包覆粒子光催化活性得到明显提高 .展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 51078185)
文摘A series of Ce-doped MnOx/TiO2 catalysts were prepared by impregnation method and used for catalytic oxidation of NO in the presence of excess O2. The sample with the Ce doping concentration of Ce/Mn=l/3 and calcined at 300 ℃ shows a superior activity for NO oxidation to NO2. On Ce（1）Mn（3）Ti catalyst, 58% NO conversion was obtained at 200 ℃ and 85% NO conversion at 250 ℃ with a GHSV of 41000 h-1, which was much higher than that over MnOx/TiO2 catalyst （48% at 250 ℃）. Characterization results implied that the higher activity of Ce（1）Mn（3）Ti could be attributed to the enrichment of well-dispersed MnO2 on the surface and the abundance of Mn3＋ and Zi3＋ species. The addition of Ce into MnO2/TiO2 could improve oxygen storage capacity and facilitate oxygen mobility of the catalyst as shown by PL and ESR, so that its activity for NO oxidation could be enhanced. The effect of H2O and SO2 on the catalyst activity was also investigated.
文摘Ce-doped titanium oxide nanoparticles were investigated in the paper. The surface structures of undoped and Ce-doped TiO2 nanoparticles were observed by scanning tunneling microscopy （STM）. The experimental results of scanning tunneling spectroscopy （STS） show that the surface electronic structures of TiO2 nanoparticles are modified by introducing new electronic states in the surface band gap through cerium ion doping. The results are discussed in terms of the influence of doping concentration on the surface band gap of TiO2.
基金supported by the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications (Grant Nos. XK1060921115 and XK1060921002)Young Scientists Fund of the National Natural Science Foundation of China (Grant No. 62204125)+1 种基金the National Key R&D Program of China (Grant No. 2022YFB3605404)the Natural Science Foundation of Guangdong Province, China (Grant No. 2019A1515010790)。
文摘A flower-like SnO_(2)–SnO/porous Ga N(FSS/PGaN) heterojunction was fabricated for the first time via a facile spraying process, and the whole process also involved hydrothermal preparation of FSS and electrochemical wet etching of GaN,and SnO_(2)–SnO composites with p–n junctions were loaded onto PGaN surface directly applied to H_(2)S sensor. Meanwhile,the excellent transport capability of heterojunction between FSS and PGaN facilitates electron transfer, that is, a response time as short as 65 s and a release time up to 27 s can be achieved merely at 150℃ under 50 ppm H_(2)S concentration, which has laid a reasonable theoretical and experimental foundation for the subsequent PGaN-based heterojunction gas sensor.The lowering working temperature and high sensitivity(23.5 at 200 ppm H2S) are attributed to the structure of PGaN itself and the heterojunction between SnO_(2)–SnO and PGaN. In addition, the as-obtained sensor showed ultra-high test stability.The simple design strategy of FSS/PGaN-based H_(2)S sensor highlights its potential in various applications.
基金supported by the National Natural Science Foundation of China(52203066,51973157,61904123,51873152)the Tianjin Natural Science Foundation(18JCQNJC02900)+3 种基金the Science and Technology Plans of Tianjin(19PTSYJC00010)the Tianjin Research Innovation Project for Postgraduate Students(2021YJSB234)the Science&Technology Development Fund of Tianjin Education Commission for Higher Education(2018KJ196)State Key Laboratory of Membrane and Membrane Separation,Tiangong University。
文摘All-solid-state electrolytes are exceedingly attractive because of the outstanding inherent safety and energy density compared to liquid electrolytes.Whereas,it is still formidable to simultaneously design solid electrolytes with favorable electrode/electrolyte interface compatibility and high ionic conductivity in a simple and scalable manner.Hence,the oxygen-vacancy-rich Gd-doped SnO_(2) nanotubes(GDS NTs)are innovatively prepared and applied to the electrolyte of all-solid-state lithium metal batteries for the first time.The addition of GDS NTs can validly construct long-range co ntinuous ion transport networks in the poly(ethylene oxide)(PEO)-based system and greatly improve the mechanical properties of the electrolyte.Compared to the PEO-based electrolyte,the composite electrolyte displays a higher lithium ion conductivity of 2.41×10^(-4) S cm^(-1) at 30℃,a higher lithium ion transference number up to 0.62 and a wider electrochemical window of 5 V at 50℃.In addition,the composite electrolyte manifests outstanding compatibility with high-voltage LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811)cathode,LiFePO4 cathode and lithium metal anode.The assembled Li/Li symmetric battery exhibits stable Li plating/stripping cycling performance,which can cycle steadily for 1500 h at a capacity of 0.3 mA h cm^(-2).And Li/LiFePO4 battery still maintains a high capacity of 131.54 mA h g^(-1) at 0.5C after 800 cycles,which has a superior capacity retention rate of 93.2%.The obtained novel composite electrolyte has promising application prospects in the field of all-solid-state lithium metal cells.
文摘Nanocrystalline SnO<sub>2</sub> and CuO doped with SnO<sub>2</sub> were prepared by the co-precipitation method and characterized for different physiochemical properties and microbiological activity. The composition and morphological formation were characterized by XRD, HRTEM, Raman, FTIR, and UV-vis spectroscopy. The Powder X-ray analysis reveals that Sn4+ ions have substituted the Cu<sup>2+</sup> ions without changing the monoclinic structure of SnO<sub>2</sub> but the average particle size of the SnO<sub>2</sub> and CuO doped SnO<sub>2</sub> samples from 11 and 5 nm respectively. However, it exhibits an inhibiting strong bacterial growth against tested bacterial strains.
基金Funded by Changzhou Science and Technology Innovation Project(Nos.CC20140048,CC20130204)National Natural Science Foundation of China(No.51273027)2015 Research and Innovation Project for College Graduates of Jiangsu Province
文摘Ce-doped Bi2O3 nanopowders were prepared by reverse titration chemical coprecipitation from Bi^3＋and Ce^（4＋）containing aqueous solution.Techniques of X-ray diffraction（XRD）,transmission electron microscopic（TEM）and Fourier transform infrared spectroscopy（FTIR）were employed to characterize the as-synthesized materials.The XRD patterns indicated that the peaks can be easily indexed toβ-Bi2O3 and no diffraction peaks of Ce or other impurity phases were detected in the prepared samples.The calculated average crystalline size decreased from 31.72 to 11.96 nm when the Ce content increased from 1 wt%to 10 wt%.The morphology changed from flake-like into the spherical-like with increase in Ce content.The electric conductivity of Ce-doped Bi2O3 electrolyte was also investigated by two probe DC method.Conductivity analysis exhibited that the rate of conductivity increased with increasing Ce^2＋ratio,when the Ce concentration was up to 5 wt%,the as-synthesized Ce-doped Bi2O3 electrolyte showed the maximum value of conductivity（0.295 S？cm^（–1））.
文摘以 Sn Cl4· Ti( OBu) 4、氨水、乙醇为原料 ,采用活性层包覆法 ,制备出 Ti O2 / Sn O2 复合光催化剂 ,并用IR、XRD、TEM和 BET等手段对样品进行了表征 .研究其对有机磷农药敌敌畏的光催化降解效果 ,与单一半导体催化剂 Sn O2 、Ti O2 做了简单对比 .结果表明 :所制 Ti O2 / Sn O2 样品为包覆型结构 ,由锐钛矿型 Ti O2 金红石型 Sn O2 组成 ,与 Sn O2 及 Ti O2 晶体粉末相比所制 Ti O2 / Sn O2 包覆粒子光催化活性得到明显提高 .
