Ce x Ti 1- x O 2 mixed oxides of different mole ratios ( x =0, 0.1, 0.2～0.9, 1.0) were prepared by co precipitation of TiCl 4 with Ce(NO 3) 3 and then loaded with different amounts of CuO. The effe...Ce x Ti 1- x O 2 mixed oxides of different mole ratios ( x =0, 0.1, 0.2～0.9, 1.0) were prepared by co precipitation of TiCl 4 with Ce(NO 3) 3 and then loaded with different amounts of CuO. The effects of CuO on NO+CO reaction were investigated, and the structure and reductive properties of various CuO/Ce x Ti 1- x O 2 were characterized by the methodologies of BET, TPR and XRD. The results show that different Ce/Ti mole ratios and calcination temperatures induce changes of structure and reductive properties of the Ce x Ti 1- x O 2 mixed oxides. When x =0.1～0.5, amorphous CeTi 2O 6 phase mainly forms at 650 ℃ compared to the formation of CeTi 2O 6 which crystallizes at 800 ℃. When x >0.6, some TiO 2 enters the CeO 2 lattice and a CeO 2 TiO 2 solid solution is formed. The activity of 6%CuO/Ce x Ti 1- x O 2 calcined at 650 ℃ is largely affected by the x values, which is the highest when x =0.3, 0.4 and 0.9. The NO conversion reaches 70% at a reaction temperature of 150 ℃. By comparison, the x values have little effect on the activity of 6%CuO/Ce x Ti 1- x O 2 calcined at 800 ℃ . There are strong interactions between CuO and CeTi 2O 6, i.e., formation of the CeTi 2O 6 phase shifts the CuO reduction peak temperature from 380 to 200 ℃, and CuO, in turn, shifts the CeTi 2O 6 reduction peak temperature from 600 to 300 ℃.展开更多
Ce1-xBixO2-δ （x = 0.00, 0.03, 0.05, 0.07, 0.10, 0.15, 0.30） solid solutions were synthesized via a hydrothermal method. The structure, spectra and electrochemical transport properties of the samples were characteri...Ce1-xBixO2-δ （x = 0.00, 0.03, 0.05, 0.07, 0.10, 0.15, 0.30） solid solutions were synthesized via a hydrothermal method. The structure, spectra and electrochemical transport properties of the samples were characterized systematically. The powder X-ray diffraction analysis showed that all of the doped samples exhibited single phase fluorite structure. The particle sizes decreased from 18 to 9 nm and the lattice parameters increased gradually with the dopant content increasing from x = 0.03 to x = 0.30. The Bi^3＋ doping also induced the F2g Raman peak to shift from 463 to 455 cm^-1, and caused a red shift of the band gap energies calculated from UV-Vis spectra. The impedance plots at different temperature demonstrated that the boundary resistance was much larger than the grain resistance, and two activation energy values were obtained in different temperature range.展开更多
Nanosized Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions（x = 0.00-0.20） were synthesized by means of hydrothermal method.Then the solid solutions were ball milled with Mg2Ni and Ni powders for 20 h to get the...Nanosized Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions（x = 0.00-0.20） were synthesized by means of hydrothermal method.Then the solid solutions were ball milled with Mg2Ni and Ni powders for 20 h to get the Mg2Ni–Ni–5 mol% Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） composites.The structures and spectrum characteristics of the Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions catalysts were analyzed systemically.XRD results showed that the doped samples exhibited single phase of CeO2 fluorite structure.The cell parameters and cell volumes were increased with increasing the doped content.Raman spectrum revealed that the peak position of F^2g mode shift to higher wavenumbers and the peak corresponding to oxygen vacancies were observed distinctly for the doped samples.UV-Vis technique indicated that the absorption peaks of Eu^3＋ and Nd^3＋ ions appeared; the bandgap energy was decreased linearly.The electrochemical and kinetic properties of the Mg2Ni–Ni–5 mol% Ce1-x（Nd0.5Eu0.5xO2-δ composites were measured.The maximum discharge capacity was increased from 722.3 mA h/g for x = 0.00 to 819.7 mA h/g for x = 0.16,and the cycle stability S20 increased from 25.0%（x = 0.00） to 42.2%（x = 0.20）.The kinetic measurement proved that the catalytic activity of composite surfaces and the hydrogen diffusion rate were improved for the composites with doped catalysts,especially for the composites with x = 0.16 and x = 0.20.The catalysis mechanism was analyzed from the point of microstructure and spectrum features of the Ce1-x（Nd0.5Eu0.5）xO2-δ solid solutions.展开更多
文摘Ce x Ti 1- x O 2 mixed oxides of different mole ratios ( x =0, 0.1, 0.2～0.9, 1.0) were prepared by co precipitation of TiCl 4 with Ce(NO 3) 3 and then loaded with different amounts of CuO. The effects of CuO on NO+CO reaction were investigated, and the structure and reductive properties of various CuO/Ce x Ti 1- x O 2 were characterized by the methodologies of BET, TPR and XRD. The results show that different Ce/Ti mole ratios and calcination temperatures induce changes of structure and reductive properties of the Ce x Ti 1- x O 2 mixed oxides. When x =0.1～0.5, amorphous CeTi 2O 6 phase mainly forms at 650 ℃ compared to the formation of CeTi 2O 6 which crystallizes at 800 ℃. When x >0.6, some TiO 2 enters the CeO 2 lattice and a CeO 2 TiO 2 solid solution is formed. The activity of 6%CuO/Ce x Ti 1- x O 2 calcined at 650 ℃ is largely affected by the x values, which is the highest when x =0.3, 0.4 and 0.9. The NO conversion reaches 70% at a reaction temperature of 150 ℃. By comparison, the x values have little effect on the activity of 6%CuO/Ce x Ti 1- x O 2 calcined at 800 ℃ . There are strong interactions between CuO and CeTi 2O 6, i.e., formation of the CeTi 2O 6 phase shifts the CuO reduction peak temperature from 380 to 200 ℃, and CuO, in turn, shifts the CeTi 2O 6 reduction peak temperature from 600 to 300 ℃.
基金financially supported by the National Natural Science Foundations of China(No.51371094,51161015)the Inner Mongolia Natural Science Foundation(No.2013MS0806)
文摘Ce1-xBixO2-δ （x = 0.00, 0.03, 0.05, 0.07, 0.10, 0.15, 0.30） solid solutions were synthesized via a hydrothermal method. The structure, spectra and electrochemical transport properties of the samples were characterized systematically. The powder X-ray diffraction analysis showed that all of the doped samples exhibited single phase fluorite structure. The particle sizes decreased from 18 to 9 nm and the lattice parameters increased gradually with the dopant content increasing from x = 0.03 to x = 0.30. The Bi^3＋ doping also induced the F2g Raman peak to shift from 463 to 455 cm^-1, and caused a red shift of the band gap energies calculated from UV-Vis spectra. The impedance plots at different temperature demonstrated that the boundary resistance was much larger than the grain resistance, and two activation energy values were obtained in different temperature range.
基金supported by the National Natural Science Foundations of China(51501095,51371094)the Natural Science Foundation of Inner Mongolia(2017MS(LH)0516)
文摘Nanosized Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions（x = 0.00-0.20） were synthesized by means of hydrothermal method.Then the solid solutions were ball milled with Mg2Ni and Ni powders for 20 h to get the Mg2Ni–Ni–5 mol% Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） composites.The structures and spectrum characteristics of the Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions catalysts were analyzed systemically.XRD results showed that the doped samples exhibited single phase of CeO2 fluorite structure.The cell parameters and cell volumes were increased with increasing the doped content.Raman spectrum revealed that the peak position of F^2g mode shift to higher wavenumbers and the peak corresponding to oxygen vacancies were observed distinctly for the doped samples.UV-Vis technique indicated that the absorption peaks of Eu^3＋ and Nd^3＋ ions appeared; the bandgap energy was decreased linearly.The electrochemical and kinetic properties of the Mg2Ni–Ni–5 mol% Ce1-x（Nd0.5Eu0.5xO2-δ composites were measured.The maximum discharge capacity was increased from 722.3 mA h/g for x = 0.00 to 819.7 mA h/g for x = 0.16,and the cycle stability S20 increased from 25.0%（x = 0.00） to 42.2%（x = 0.20）.The kinetic measurement proved that the catalytic activity of composite surfaces and the hydrogen diffusion rate were improved for the composites with doped catalysts,especially for the composites with x = 0.16 and x = 0.20.The catalysis mechanism was analyzed from the point of microstructure and spectrum features of the Ce1-x（Nd0.5Eu0.5）xO2-δ solid solutions.
