Electrochemical Properties of CeMg_(12)+x%Ni Composites (x=0～200) Prepared by Ball-Milling

The electrochemical properties of the as-cast and ball-milled CeMg12+x%(mass fraction) Ni (vs. CeMg12) (x=0, 50, 100 and 200) composites were investigated. The microstructure and discharge capacity of the ball-milled CeMg12+x%Ni composites differ greatly depending on the amount of Ni introduced during ball-milling. The more nickel powder added, the more advantageous for the formation of the amorphous structure. And the discharge capacities of the ball-milled composites increase with increasing amount of nickel added. After 90 h ball-milling, the CeMg12+200% Ni composite exhibits a high discharge capacity of 1170 mAh·g-1(CeMg12)-1 at 303 K. The improvement of electrochemical capacity is attributed to the formation of a homogeneous amorphous structure as well as the modification of the surface state after Ni addition.

Electrochemical Hydrogen Storage Performance of the Nanocrystalline and Amorphous Pr-Mg-Ni-based Alloys Synthesized by Mechanical Milling

The PrMg12-type composite alloy of PrMg_(11)Ni + x wt% Ni (x=100,200) with an amorphous and nanocrystalline microstructure were synthesized through the mechanical milling.Effects of milling duration and Ni content on the microstructures and electrochemical hydrogen storage performances of the ball-milled alloys were methodically studied.The ball-milled alloys obtain the optimum discharge capacities at the first cycle.Increasing Ni content dramatically enhances the electrochemical property of alloys.Milling time varying may obviously impact the electrochemical performance of these alloys.The discharge capacities show a significant upward trend with milling duration prolonging,but milling for a longer time more than 40 h induces a slight decrease in the discharge capacity of the x=200 alloy.As milling duration increases,the cycle stability clearly lowers,while it first declines and then augments under the same condition for the x=200 alloy.The high-rate discharge abilities of the ball-milled alloys show the optimum values with milling time varying.

Structure and electrochemical hydrogen storage characteristics of Ce-Mg-Ni-based alloys synthesized by mechanical milling

The substituting Mg with Ni and milling as-cast alloy with Ni were adopted to obtain nanocrystalline/amorphous CeMgnNi＋x wt.%Ni（x=100,200） alloys and promote the electrochemical hydrogen storage performances of CeMg_（12）-type alloys.Analyzing the structural features of the alloys provided a mechanism for ameliorating the electrochemical hydrogen storage properties.The electrochemical tests demonstrated that all the alloys just needed one cycle to be activated.Rising Ni proportion had an obvious role on charge-discharge reaction.The discharge capacities of the as-milled（60 h） alloys increased sharply from 182.0 mAh/gfor x=100 alloy to 1010.2 mAh/gfor x=200 alloy at current density of 60 mAh/g.Furthermore,milling time largely determined the performances of electrochemical reaction.The discharge capacity continued to grow along with prolonging milling time,while the cycle stability obviously decreased for x=100 alloy,and first declined and then augmented for the x=200 alloy with milling time extending.In addition,there was an optimal value with milling time varying for the high rate discharge abilities（HRD）,which was 80.3%for x=100 alloys and 86.73%for x=200,respectively.

Effect of milling duration on hydrogen storage thermodynamics and kinetics of ball-milled Ce-Mg-Ni-based alloy powders

To improve the hydrogen storage performance of CeMg12-type alloys, partially substituting Mg with Ni in the alloy was conducted. The way to synthesize the target alloy powders was the mechanical milling method, by which the CeMg11-Ni ＋ x wt% Ni （x = 100, 200） alloy powders with nanocrystalline and amorphous structure were obtained. The influence of the milling time and Ni content on the hydrogen storage properties of the alloys was discussed. The X-ray diffractometer and high-resolution transmission electron microscope were used to investigate the microstructures of the ball-milled alloys. The hydrogenation/dehydrogenation dynamics were studied using a Sievert instrument and a differential scanning calorimeter which was linked with a H2 detector. The hydrogen desorption activation energies of the alloy hydrides were evaluated by Arrhenius and Kissinger equations. From the results point of views, there is a little decline in the thermo- dynamic parameters （enthalpy and entropy changes） with the increase in Ni content. However, the alloys desorption and absorption dynamics are improved distinctly. What is more, the variation of milling time results in a dramatic influence on the hydrogen storage performances of alloys. Various maximum values of the hydrogen capacities correspond to different milling time, which are 5.805 and 6.016 wt% for the CeMgllNi ＋ x wt% Ni （x = 100, 200） alloys, respectively. The kinetics tests suggest that the hydrogen absorption rates increase firstly and then decrease with prolonging the milling time. The improvement of the gaseous hydrogen storage kinetics results from the decrease in the activation energy caused by the increase in Ni content and milling time.